How to Repair Car Dent？
Please read this instruction carefully. we recommend that you use other items to practice before repairing, so as not to
cause unnecessary damage to your car due to incorrect operations.
Note: For car with thick sheetmetal or aged paint, please carefully repair the dent, because it may damage the original
paint when repairing.
Important Notice: Please use the supplied towel
to clean the dent, because the dirty surface may
reduce the stickiness of glue.
Turn on the car's power supply. Plug in the hot
melt gun and turn on the switch. Wait for 3-5
minutes for heating and melting the glue stick,
and then apply the hot-melt glue to a suitable
tab.
Quickly place the tab to the dent and add some
hot glue around it to reinforce. Wait 10 minutes
for drying glue.
Pull the tab outward with a puller. If
necessary, you can repeatedly keep the
hammer hit the T handle to restore the dent.
Spray 75-99 degree alcohol to the residue glue
for reducing the stickiness of glue.
Remove the glue from your car with plastic film
and clean its surface with the towel.
