Tascam DR 40X 取扱説明書

ENGLISH

FRANÇAIS

ESPAÑOL

DEUTSCH

ITALIANO

RUSSIAN

OWNER'S MANUAL

MODE D’EMPLOI

MANUAL DEL USUARIO

BEDIENUNGSANLEITUNG

MANUALE DI ISTRUZIONI

РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ





DR-40X

Linear PCM Recorder

D01345700B

0320.MA-2735B

2 TASCAM DR-40X

TEAC CORPORATION

https://tascam.jp/jp/

Phone: +81-42-356-9143

1-47 Ochiai, Tama-shi, Tokyo 206-8530 Japan

TEAC AMERICA, INC.

https://tascam.com/us/

Phone: +1-323-726-0303

10410 Pioneer Blvd. Suite #1, Santa Fe Springs,

California 90670, U.S.A.

TEAC UK Ltd.

https://www.tascam.eu/en/

Phone: +44-1923-797205

Meridien House, 69-71 Clarendon Road, Watford, Herts,

WD17 1DS, United Kingdom

TEAC EUROPE GmbH

https://www.tascam.eu/de/

Phone: +49-611-71580

Bahnstrasse 12, 65205 Wiesbaden-Erbenheim, Germany

TEAC SALES & TRADING(SHENZHEN) CO., LTD

Phone: +86-755-88311561~2

Room 817, Xinian Center A, Tairan Nine Road West,

Shennan Road, Futian District, Shenzhen,

Guangdong Province 518040, China

• TASCAM is a registered trademark of TEAC Corporation.

• SDXC Logo is a trademark of SD-3C, LLC.

• MPEG Layer-3 audio coding technology licensed from

Fraunhofer IIS and Thomson.

• Supply of this product does not convey a license nor

imply any right to distribute MPEG Layer-3 compliant

content created with this product in revenue-generating

broadcast systems (terrestrial, satellite, cable and/or

other distribution channels), streaming applications (via

Internet, intranets and/or other networks), other content

distribution systems (pay-audio or audio-on-demand

applications and the like) or on physical media (compact

discs, digital versatile discs, semiconductor chips, hard

drives, memory cards and the like). An independent

license for such use is required. For details, please visit

http://mp3licensing.com.

• Other company names, product names and logos in this

document are the trademarks or registered trademarks of

their respective owners.

TASCAM DR-40X 3

Owner’s Manual

IMPORTANT SAFETY PRECAUTIONS

INFORMATION TO THE USER

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to

radio communications. However, there is no guarantee

that interference will not occur in a particular instal-

lation. If this equipment does cause harmful interference

to radio or television reception, which can be deter-

mined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or

more of the following measures.

a) Reorient or relocate the receiving antenna.

b) Increase the separation between the equipment and

receiver.

c) Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

d) Consult the dealer or an experienced radio/TV

technician for help.

CAUTION

Changes or modifications to this equipment not

expressly approved by TEAC CORPORATION for

compliance could void the user’s authority to operate

this equipment.

For U.S.A.

This product complies with the

European Directives request and the

other Commission Regulations.

For Canada

THIS CLASS B DIGITAL APPARATUS COMPLIES WITH

CANADIAN ICES-003.

CET APPAREIL NUMERIQUE DE LA CLASSE B EST

CONFORME A LA NORME NMB-003 DU CANADA.

Declaration of Conformity

Model Number : DR-40X

Trade Name : TASCAM

Responsible party : TEAC AMERICA, INC.

Address : 10410 Pioneer Blvd. Suite #1, Santa Fe Springs,

California 90670, U.S.A.

Telephone number : 1-323-726-0303

This device complies with Part.15 of FCC Rules.

Operation is subject to the following two conditions:

1) This device may not cause interference, and

2) This device must accept any interference, including

interference that may cause undesired operation.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accor-

dance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety. If

the provided plug does not fit into your outlet, consult

an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or

pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the

manufacturer.

12. Use only with the cart, stand,

tripod, bracket, or table

specified by the manufacturer,

or sold with the apparatus.

When a cart is used, use caution

when moving the cart/

apparatus combination to avoid

injury from tip-over.

13. Unplug this apparatus during lightning storms or when

unused for long periods of time.

14. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally,

or has been dropped.

iThe apparatus draws nominal non-operating power from

the AC outlet with its POWER or STANDBY/ON switch not

in the ON position.

iThe mains plug is used as the disconnect device, the

disconnect device shall remain readily operable.

iCaution should be taken when using earphones or

headphones with the product because excessive sound

pressure (volume) from earphones or headphones can

cause hearing loss.

iIf you are experiencing problems with this product,

contact TEAC for a service referral. Do not use the

product until it has been repaired.

WARNING

To prevent possible hearing damage, do not

listen at high volume levels for long periods.

4 TASCAM DR-40X

CAUTION

iDo not expose this apparatus to drips or splashes.

iDo not place any objects filled with liquids, such as vases,

on the apparatus.

iDo not install this apparatus in a confined space such as

a book case or similar unit.

iThe apparatus should be located close enough to the AC

outlet so that you can easily grasp the power cord plug

at any time.

iIf the product uses batteries (including a battery pack

or installed batteries), they should not be exposed to

sunshine, fire or excessive heat.

iCAUTION for products that use replaceable lithium

batteries: there is danger of explosion if a battery is

replaced with an incorrect type of battery. Replace only

with the same or equivalent type.

CAUTIONS ABOUT BATTERIES

This product uses batteries. Misuse of batteries could

cause a leak, rupture or other trouble. Always abide by the

following precautions when using batteries.

iNever recharge non-rechargeable batteries. The batteries

could rupture or leak, causing fire or injury.

iWhen installing batteries, pay attention to the polarity

indications (plus/minus (¥/^) orientation), and install

them correctly in the battery compartment as indicated.

Putting them in backward could make the batteries

rupture or leak, causing fire, injury or stains around them.

iWhen you store or dispose batteries, isolate their

terminals with insulation tape or something like that to

prevent them from contacting other batteries or metallic

objects.

iWhen throwing used batteries away, follow the disposal

instructions indicated on the batteries and the local

disposal laws.

iDo not use batteries other than those specified. Do not

mix and use new and old batteries or different types of

batteries together. The batteries could rupture or leak,

causing fire, injury or stains around them.

iDo not carry or store batteries together with small metal

objects. The batteries could short, causing leak, rupture

or other trouble.

iDo not heat or disassemble batteries. Do not put them in

fire or water. Batteries could rupture or leak, causing fire,

injury or stains around them.

iIf the battery fluid leaks, wipe away any fluid on the

battery case before inserting new batteries. If the battery

fluid gets in an eye, it could cause loss of eyesight. If

fluid does enter an eye, wash it out thoroughly with

clean water without rubbing the eye and then consult a

doctor immediately. If the fluid gets on a person’s body

or clothing, it could cause skin injuries or burns. If this

should happen, wash it off with clean water and then

consult a doctor immediately.

iThe unit power should be off when you install and

replace batteries.

iRemove the batteries if you do not plan to use the unit

for a long time. Batteries could rupture or leak, causing

fire, injury or stains around them. If the battery fluid

leaks, wipe away any fluid on the battery compartment

before inserting new batteries.

iDo not disassemble a battery. The acid inside the battery

could harm skin or clothing.

For European Customers

Disposal of electrical and electronic

equipment

(a) All electrical and electronic equipment should be

disposed of separately from the municipal waste stream

via designated collection facilities appointed by the

government or the local authorities.

(b) By disposing of the electrical and electronic equipment

correctly, you will help save valuable resources and

prevent any potential negative effects on human health

and the environment.

(c) Improper disposal of waste equipment can have

serious effects on the environment and human health

as a result of the presence of hazardous substances in

electrical and electronic equipment.

(d) The crossed out wheeled dust bin

symbol indicates that electrical and

electronic equipment must be collected

and disposed of separately from household

waste.

(e) The return and collection systems are

available to the end users. For more

detailed information about disposal of old electrical

and electronic equipment, please contact your city

office, waste disposal service or the shop where you

purchased the equipment.

Disposal of batteries and/or accumulators

(a) Waste batteries and/or accumulators should be

disposed of separately from the municipal waste stream

via designated collection facilities appointed by the

government or the local authorities.

(b) By disposing of waste batteries and/or accumulators

correctly, you will help save valuable resources and

prevent any potential negative effects on human health

and the environment.

(c) Improper disposal of waste batteries and/or accumu-

lators can have serious effects on the environment and

human health as a result of the presence of hazardous

substances in batteries and/or accumulators.

(d) The crossed out wheeled dust bin

symbol indicates that batteries and/

or accumulators must be collected and

disposed of separately from household

waste.

If the battery or accumulator contains

more than the specified values of lead

(Pb), mercury (Hg), and/or cadmium (Cd) defined in

the Battery Directive (2006/66/EC), then the chemical

symbols for lead (Pb), mercury (Hg) and/or cadmium

(Cd) will be indicated beneath the crossed out wheeled

dust bin symbol.

(e) The return and collection systems are available to the

end users. For more detailed information about disposal

of waste batteries and/or accumulators, please contact

your city office, waste disposal service or the shop

where you purchased them.

Pb, Hg, Cd

TASCAM DR-40X 5

Introduction

Thank you very much for purchasing the TASCAM DR-40X

Linear PCM Recorder.

Before using this unit, read this owner’s manual carefully so

that you will be able to use it correctly and enjoy working

with it for many years. After you have finished reading this

manual, please keep it in a safe place for future reference.

Note about the Reference Manual

This Owner's Manual explains the main functions of this

unit. Please see the Reference Manual for information

about all the unit's functions.

You can also download this Owner’s Manual and the

Reference Manual from the TEAC Global Site

(http://teac-global.com/).

Items included with this product

This product includes the following items.

Take care when opening the package to avoid damaging

the items.

Take care when opening the package to avoid damaging

the items. Keep the packing materials for transportation in

the future.

Please contact the store where you purchased this unit

if any of these items are missing or have been damaged

during transportation.

iMain unit .....................................................................................× 1

iAA alkaline batteries ...............................................................× 3

iTilt foot.........................................................................................× 1

iOwner's Manual (this document) including warranty × 1

Cleaning the unit

To clean the unit, wipe it gently with a soft dry cloth. Do

not wipe with chemical cleaning cloths, benzene, thinner,

alcohol or other chemical agents. Doing so could damage

the surface or cause discoloration.

Precautions for placement and use

iThe environmental temperature operating range of this

unit is 0 - 40°C (32 - 104°F).

iDo not install this unit in the following types of locations.

Doing so could degrade the sound quality and/or cause

malfunctions.

Places with significant vibrations

Near windows or other places exposed to direct

sunlight

Near heaters or other extremely hot places

Extremely cold places

Places with bad ventilation or high humidity

Very dusty locations

Places exposed directly to rain or other water

iDo not place this unit on top of a power amplifier or

other device that generates heat.

iIf this unit is placed near a power amplifier or other

device with a large transformer, it could cause a hum. If

this occurs, increase the distance between this unit and

the other device.

iThis unit could cause color irregularities on a TV screen

or noise from a radio if used nearby. If this occurs, use

this unit farther away.

iThis unit might produce noise if a mobile phone or other

wireless device is used nearby to make calls or send

or receive signals. If this occurs, increase the distance

between this unit and those devices or turn them off.

Beware of condensation

Condensation could occur if the unit is moved from a

cold place to a warm place, it is used immediately after a

cold room has been heated or it is otherwise exposed to

a sudden temperature change. To prevent this, or if this

occurs, let the unit sit for one or two hours at the new room

temperature before using it.

Contents

Introduction .................................................................. 5

Note about the Reference Manual .............................. 5

Items included with this product ................................ 5

Cleaning the unit .......................................................... 5

Precautions for placement and use ............................. 5

Beware of condensation .............................................. 5

Names and Functions of Parts ..................................... 6

Top panel ...................................................................................... 6

Front panel ................................................................................... 6

Left side ......................................................................................... 6

Right side panel .......................................................................... 7

Bottom Panel ...............................................................................7

Making preparations .................................................... 7

Installing batteries ..................................................................... 7

Inserting a card ........................................................................... 7

Turning the unit on ................................................................... 7

Using the built-in microphone .............................................8

Attaching the tilt foot ...............................................................9

Screen overview ........................................................... 9

Using the menu ........................................................... 10

Recording .................................................................... 10

Setting the recording mode ................................................10

Using the low-cut filter ..........................................................11

Setting the limiter ....................................................................11

Playing recordings ......................................................12

Selecting files ............................................................................12

Using as an audio interface ....................................... 13

Preparation.................................................................................13

Connection.................................................................................13

Monitoring .................................................................................13

Disconnecting ...........................................................................13

Troubleshooting ......................................................... 14

Specifications .............................................................. 15

Ratings .........................................................................................15

Inputs and outputs .................................................................. 15

Audio performance .................................................................15

Recording times .......................................................................16

Other specifications ................................................................ 16

6 TASCAM DR-40X

Names and Functions of Parts

Top panel

1 Built-in stereo microphone

2 DUAL indicator

3 4CH indicator

4 OVER DUB indicator

5 3/4 [SOLO] button

Select and solo channels 3/4

6 1/2 [SOLO] button

Select and solo channels 1/2

7 ¤ (HOME)[8] button

Press to stop, turn the power on/off (¤) and open the

Home Screen HOME)

8 + button

Plus/up

9 MENU button

Open Menu Screen

0 .button

Search backward/left/cancel

q PB CONT button

Open Playback Control screen

w − button

Minus/down

e Display

r PEAK indicator

Lights when recording level is too high

t REC MODE button

Open the recording mode menu screen

y RECORD [0] button/REC indicator

Shows recording status

u PLAY [7] button

PLAY

i QUICK button

Open the quick menu

o / button

Search forward/right/confirm

p ENTER/MARK button

Set/clear marks

a MIXER button

Open the mixer screen

Front panel

s EXT MIC/LINE IN L/R jacks (XLR/TRS)

Mic/external input jack

d

REMOTE jack (2.5 mm dia. TRS jack)

Left side

f /LINE OUT jack

Headphone/line output jack

g EXT IN switch

h HOLD switch

Set hold function

j INPUT LEVEL (+/−) buttons

TASCAM DR-40X 7

Right side panel

k USB port

l microSD card slot

Bottom Panel

; Mono speaker

z Tripod or tilt foot mounting threads

(1/4-inch)

x Battery compartment cover

c Strap attachment

v Battery compartment

Making preparations

Installing batteries

While pressing the battery compartment cover on the back

of the unit, slide it open. Then, install batteries.

TIP

The TASCAM PS-P520E AC adapter can also be used

with this unit.

Inserting a card

Open the microSD slot cover on the right side panel, and

insert a microSD card.

Turning the unit on

1. Slide the HOLD switch in the direction of the arrow to

unlock it.

TIP

By sliding it toward HOLD, button operations can be

disabled, preventing misoperation during recording.

2. Press and hold the ¤ (HOME) [8] button for several

seconds.

The first time the power is turned on after purchase,

setting screens like the following will open.

Formatting cards

Press the ENTER/MARK button to to execute.

CAUTION

Execution of formatting erases all data currently on the

card.

This message will not appear for cards that have already

been formatted.

8 TASCAM DR-40X

Setting the language

Select the language used for menus and messages.

Use the + and − buttons to select the language, and press

the ENTER/MARK button to confirm.

DATE/TIME

Set the date and time.

Use the . and / buttons to move the cursor, and

use the + and − buttons to change the date and time.

Press the ENTER/MARK button.

TIP

The language and date/time settings can be changed

later from the menu.

Using the built-in microphone

This unit’s built-in microphones can be adjusted, allowing

the angles of the microphones to be changed. You can

choose clear stereo sound or wide stereo sound according

to the recording source, situation, etc. by opening or

closing the microphone pair.

Setting the mics to record a wide stereo

sound (A-B position)

Spread the stereo microphone to the left and right. (A-B

position)

Set this way, the two microphones are spread widely left

and right, and recording is possible with a strong stereo

field that is good for music, for example.

If you open or close the microphone pair while using the

built-in stereo microphone and the left-right channels does

not suit the angle of the microphone, a pop-up message

appears to ask whether you want to swap the left-right

channels of the microphone.

CAUTION

Set the left-right channels of the built-in microphone to

L-R.

When you are using the built-in microphone and the

setting is not L-R, appears on the Home screen.

Setting the mics to record a clear stereo

sound (X-Y position)

Close the stereo microphone. (X-Y position)

Set this way, the microphone pair is close, and recording is

possible with a clear stereo field with less phase difference.

If you open or close the microphone pair while using the

built-in stereo microphone and the left-right channels does

not suit the angle of the microphone, a pop-up message

appears to ask whether you want to swap the left-right

channels of the microphone.

CAUTION

Set the left-right channels of the built-in microphone to

R-L.

When you are using the built-in microphone and the

setting is not R-L, appears on the Home screen.

TASCAM DR-40X 9

Attaching the tilt foot

When recording with the built-in mic, you can attach the

included tilt foot to the tripod mounting threads to prevent

the mic from being too low when placing the unit with

the bottom side (battery compartment cover side) down.

When not using the tilt foot, you can put it between the

two protrusions on the inside of the battery compartment

cover for storage and transportation.

Screen overview

When stopped or playing back

1 Playback area

2 Elapsed time

3

Current playback file number/total number of

files

4 Remaining battery charge/power supply

status

5 Playback status

6 Playback position display

7 Track status

8 Playback level meters

9 Remaining time

0 Playback speed status

q Effect status

w Peak value (decibels)

e Playback file name

When recording or in recording standby

1 Recording format

2 Elapsed recording time

3 Recording sampling frequency

4 Number of recording channels

5 Recording status

6 Input source

7 Recording level meters

8 Remaining recording time

9 Level mode setting status

0 Low cut filter status

q Effect status

w Tone output setting status

e Recording file name

r Peak value (decibels)

10 TASCAM DR-40X

Using the menu

Use the menu to change various settings, including

recording, playback and system settings, and to execute

various functions.

1. Press the MENU button.

The MENU screen appears.

2. Use the + and − buttons to select the menu item, and

press ENTER/MARK.

The setting screen will open.

3. Use the + and − buttons to select the setting item, and

press 7.

Settings can now be changed and functions executed.

4. Use the + and − buttons to change the setting.

NOTE

iPress the MENU button to return to the previous

screen.

iTo return to the Home Screen, press the ¤ (HOME)

[8] button.

Recording

1. Point the built-in mic towards the sound to be recorded.

Sound source

Built-in mic

2. Press the RECORD [0] button to enter recording

standby.

Recording standby will start, 09 will appear on the

display, and the REC indicator will blink.

-12dB

3. Adjust the recording level.

Adjust the built-in mic orientation and distance from

the sound source as well as the input level so that the

recording level meters stay near −12 dB at the peak

input level.

Use the . and / buttons to adjust the input level.

4. Press the RECORD [0] button to start recording.

Recording will start, will appear on the display, and

the REC indicator will light.

5. Press the ¤ (HOME) [8] button to stop recording.

Recording stops, and 8 appears on the display.

Setting the recording mode

This recorder has five recording modes.

Set the recording mode on the REC MODE screen.

The settings available differ according to the recording

mode.

1. When stopped, press the REC MODE button.

This opens the REC MODE menu.

2. Use the + and − buttons to select REC MODE, and press

the ENTER/MARK button.

This enables changing the REC MODE setting.

MONO mode

This is a mode for mono recording.

TASCAM DR-40X 11

STEREO mode (default)

This is a mode for stereo recording of two

independent left and right channels.

DUAL mode

This mode uses one input source to create two

files with different input level settings (Level Mode

setting screen). Either two mono or two stereo

recording files are created.

4CH mode

This mode uses both the built-in mics and the

external inputs to record two pairs of inputs as two

files. Two stereo recording files are created.

OVERDUB mode

This recording mode add new sounds to the

playback file.

The MIX setting mixes the playback sound and

input sound to create a new file. The SEPARATE

setting creates a new recording file with only the

input sound.

When in OVERDUB mode, select one of these two

options using the DUB MODE setting.

Using the low-cut filter

Noise from air conditioning and other sources can be

reduced when recording.

1. When in recording standby, press the QUICK button.

This opens the Quick menu.

2. Use the

+ and − buttons to select the LOW CUT, and press

ENTER/MARK

.

The setting screen for the low-cut filter will open.

Options: OFF, 40Hz, 80Hz, 120Hz, 220Hz

3. Use the + and − buttons to select the setting, and press

ENTER/MARK.

This changes the setting and returns to the QUICK

menu screen.

4. Press the ¤ (HOME) [8] button

The Home Screen will reopen.

Setting the limiter

This can help prevent sound from becoming distorted

when loud noises are input suddenly during recording.

1. When in recording standby, press the QUICK button.

This opens the Quick menu.

2. Use the

+ and − buttons to select the

LEVEL MODE

, and

press

ENTER/MARK

.

This opens the Level Mode setting screen.

Options: MANUAL (default), LIMITER, PEAK REDUCTION,

AUTO

3. Use the + and − buttons to select the setting, and press

ENTER/MARK.

This changes the setting and returns to the QUICK

menu screen.

4. Press the ¤ (HOME) [8] button

The Home Screen will reopen.

12 TASCAM DR-40X

Playing recordings

1. Select a file, and press the PLAY [7] button to start

playback.

Playback starts, and 7 appears on the display.

2. Adjust the volume.

Use the + and − buttons to change the output volume.

3. Press the ¤ (HOME) [8] button to stop playback.

Playback stops, and 79 appears on the display.

Listening with headphones

Connect headphones to the /LINE OUT jack on this unit.

Operations during playback

Pause playback Press the 8 button

Search forward Press and hold the /

button

Search backward Press and hold the .

button

Skip to start of playing file Press the . button

once briefly

Skip to start of file before

playing file

Press the . button

twice briefly

Skip to start of file after

playing file

Press the / button

once briefly

Go back the set amount of

time (options: OFF, 1 sec, 3

sec, 5 sec, 10 sec, 30 sec, 1

min, 5 min, 10 min)

Press the y button

during playback

Add a mark Press the MARK button

during playback

Selecting files

1. Press the MENU button.

The MENU screen appears.

2. Use the + and − buttons to select BROWSE, and press

ENTER/MARK.

Browse screen appears.

3. Use the + and − buttons to select a file, and press /.

The Home Screen will reopen.

TIP

Press the ENTER/MARK button to start playback and

return to the Home Screen.

TASCAM DR-40X 13

Using as an audio interface

By connecting this unit to a computer (Windows/Mac) or

iOS device, you can use it as an audio interface.

Preparation

1. Use a USB cable to connect the unit to a computer, and

turn the unit on.

micro-B USB plugComputer

USB

The USB CONNECT screen will open.

NOTE

iWhen being used as an audio interface, the DR-40X

itself cannot record or play back files.

iAn Apple Lightning-USB camera adapter is necessary to

connect the unit to an iOS device

2. Use the + and − buttons to select AUDIO I/F, and press

ENTER/MARK.

The AUDIO I/F screen will open.

Connection

1. Select the type of connected device.

Options: PC/Mac(default), iOS

NOTE

When PC/Mac is selected, the unit with operate on bus

power from the computer.

2. Set the sampling rate.

Options: 44.1k, 48k (default)

3. Select Exec at the CONNECT item.

When the unit connects with the external device, the USB

AUDIO I/F screen will open.

Monitoring

1. Press the MENU button.

The MENU screen appears.

2. Selecting the monitored signal

Options

PC/Mac (default): Monitor the playback sound from

the PC or Mac.

DIRECT: Monitor the input sound without latency.

NOTE

iThe meters can be used to check the playback sound of

the external device.

iSound will not be output from the speaker.

iUse headphones to hear the sound.

Disconnecting

1. Press the MENU button.

The MENU screen appears.

2. Select Exec at the DISCONNECT item.

The recorder disconnects from the external device, and the

Home Screen opens.

14 TASCAM DR-40X

Troubleshooting

If you are having trouble with the operation of this unit,

please try the following before seeking repair. If these

measures do not solve the problem, please contact the

store where you purchased this unit or TASCAM customer

support service.

Power will not turn ON.

iConfirm that batteries are installed correctly.

iConfirm that the HOLD switch is not set.

The unit turns off automatically.

iCheck the automatic power saving function setting. Set

it to “Off” to prevent the power from turning off automat-

ically. See "Setting the automatic power saving function"

in "12 − Settings and Information" of the Reference

Manual.

The microSD card is not recognized.

iConfirm that the microSD card is inserted completely.

No sound is output or sound is not output

from the speaker.

iConfirm that the output volume is not lowered it too

much.

iConfirm that the speaker setting is on. Even if the

speaker setting is on, sound will not be output from the

speaker when headphones are connected or when the

unit is recording or in recording standby.

Recording is not possible.

iConfirm that the REC indicator is lit. If the REC indicator

is blinking, the unit is in recording standby.

iCheck the remaining available recording time shown on

the Recording Screen.

The recorded sound is quiet or distorted.

iCheck the input level setting.

The unit is not recognized by a computer

connected using a USB cable.

iConfirm that the connected computer uses a compatible

operating system.

iThe USB function used must be selected from the menu

to enable a computer to recognize this unit.

iConfirm that the USB cable is not designed only for

charging.

iConfirm that the connection is not being made through

a USB hub.

Sound skips or noise occurs when in USB

audio interface mode.

For Windows

iPerformance options

Select “Adjust for best performance”.

iPower options

Select “High performance”.

The wrong language was set accidentally.

iAfter pressing the ¤ (HOME) [8] button to turn

the unit off, press the ¤ (HOME) [8] button while

pressing and holding the MENU button.

The language selection menu will appear, and you will

be able to select the language.

TASCAM DR-40X 15

Specifications

Ratings

Recording media

SD card (64 MB - 2 GB)

SDHC card (4 GB - 32 GB)

SDXC card (48 GB - 128GB)

Recording/playback formats

BWF: 44.1/48/96 kHz, 16/24 bit

WAV: 44.1/48/96 kHz, 16/24 bit

MP3: 44.1/48 kHz, 32/64/96/128/192/256/320 kbps

Number of channels

4 channels (stereo × 2)

Inputs and outputs

EXT MIC/LINE IN jacks (XLR connectors can provide phantom power)

Connector

XLR-3-31 (1: GND, 2: HOT, 3: COLD) (support phantom power)

6.3mm (1/4") standard TRS jacks (Tip: HOT, Ring: COLD, Sleeve: GND)

/LINE OUT jack

Connector: 1/8” (3.5mm) stereo mini jack

Built-in speaker

0.3W (mono)

Control input/output ratings

USB port

Connector type: Micro-B

Format: USB 2.0 HIGH SPEED mass storage class

REMOTE jack

Connector: 2.5mm TRS jack

Audio performance

Frequency response

20 Hz - 20 kHz +0/−1 dB (EXT IN to LINE OUT, 44.1 kHz sampling frequency, JEITA*)

20 Hz - 22 kHz +0/−1 dB (EXT IN to LINE OUT, 48 kHz sampling frequency, JEITA*)

20 Hz - 40 kHz +0/−1 dB (EXT IN to LINE OUT, 96 kHz sampling frequency, JEITA*)

Total harmonic distortion

0.01% or less (EXT IN to LINE OUT, 44.1/48/96 kHz sampling frequency, JEITA*)

S/N ratio

94 dB or higher (EXT IN to LINE OUT, 44.1/48/96 kHz sampling frequency, JEITA*)

Note) JEITA: Conforming to JEITA CP-2150

16 TASCAM DR-40X

Recording times

File format (recording setting) Capacity

4GB

WAV 16-bit (STEREO) 44.1 kHz 6:44:00

WAV 24-bit (STEREO) 96 kHz 2:04:00

MP3 (STEREO/MONO) 320 kbps 44.1 kHz

48 kHz 29:48:00

iThe recording times shown above are estimates. They might differ depending on the SD/

SDHC/SDXC card in use.

iThe recording times shown above are not continuous recording times, but rather they

are the total possible recording times for the SD/SDHC/SDXC card.

Other specifications

Power

3 AA batteries (alkaline or NiMH)

USB bus power from a computer

AC adapter (TASCAM PS-P520E, sold separately)

Power consumption

1.7 W (maximum)

Current consumption

0.34A (maximum)

Dimensions (W × H × D)

70 x 155 x 35mm (2.75” x 6.1” x 1.37”)

(when the microphone pair is close)

90 x 155 x 35mm (3.54” x 6.1” x 1.37”)

(when the microphone pair is open)

Weight

213 g (7.51 oz) (not including batteries)

282 g (9.95 oz) (including batteries)

Operating temperature range

0°C - 40°C (32°F - 104°F)

Battery operation time (continuous operation)

iUsing alkaline batteries (EVOLTA)

Format Continuous

operation time Note

Recording 2-channel WAV,

44.1 kHz, 16-bit

About 18 hours

With built-in stereo mic input

About 5.5 hours When using phantom power

(+48V, 3mA×2 load)

Playback 2-channel WAV,

44.1 kHz, 16-bit About 19.5 hours Headphones

Recording: JEITA recording time

Playback: JEITA music playback time

iUsing NiMH battery (eneloop)

Format Continuous

operation time Note

Recording 2-channel WAV,

44.1 kHz, 16-bit

About 16 hours

With built-in stereo mic input

About 5.5 hours When using phantom power

(+48V, 3mA×2 load)

Playback 2-channel WAV,

44.1 kHz, 16-bit About 15.5 hours Headphones

Recording: JEITA recording time

Playback: JEITA music playback time

iIllustrations in this manual might differ in part from the actual product.

iSpecifications and external appearance might be changed without notification to

improve the product.

iDetailed specifications are provided in the Reference Manual.

TASCAM DR-40X 17

Mode d'emploi

PRÉCAUTIONS DE SÉCURITÉ

IMPORTANTES

Ce produit est conforme aux impératifs

des directives européennes et autres

règlements de la Commission.

Pour le Canada

THIS CLASS B DIGITAL APPARATUS COMPLIES WITH

CANADIAN ICES-003.

CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST

CONFORME À LA NORME NMB-003 DU CANADA.

INSTRUCTIONS DE SÉCURITÉ

IMPORTANTES

1. Lisez ces instructions.

2. Conservez ces instructions.

3. Tenez compte de tous les avertissements.

4. Suivez toutes les instructions.

5. N'utilisez pas cet appareil avec de l'eau à proximité.

6. Nettoyez-le uniquement avec un chiffon sec.

7. Ne bloquez aucune ouverture de ventilation. Installez-le

conformément aux instructions du fabricant.

8. Ne l'installez pas près de sources de chaleur telles que

des radiateurs, bouches de chauffage, poêles ou autres

appareils (y compris des amplificateurs) dégageant de

la chaleur.

9. Ne neutralisez pas la fonction de sécurité de la fiche

polarisée ou de terre. Une fiche polarisée a deux

broches, l'une plus large que l'autre. Une fiche de terre a

deux broches identiques et une troisième broche pour

la mise à la terre. La broche plus large ou la troisième

broche servent à votre sécurité. Si la fiche fournie

n'entre pas dans votre prise, consultez un électricien

pour le remplacement de la prise obsolète.

10. Évitez de marcher sur le cordon d'alimentation et de

le pincer, en particulier au niveau des fiches, des prises

secteur, et du point de sortie de l'appareil.

11. N'utilisez que des fixations/accessoires spécifiés par le

fabricant.

12. Utilisez-le uniquement avec le

chariot, socle, trépied, support

ou table spécifié par le

fabricant ou vendu avec

l'appareil. Si un chariot est

utilisé, faites attention à ne pas

être blessé par un renversement lors du déplacement

de l'ensemble chariot/appareil.

13. Débranchez cet appareil en cas d'orage ou de non

utilisation prolongée.

14. Confiez toute réparation à des techniciens de

maintenance qualifiés. Une réparation est nécessaire si

l'appareil a été endommagé d'une quelconque façon,

par exemple si le cordon ou la fiche d'alimentation est

endommagé, si du liquide a été renversé sur l'appareil

ou si des objets sont tombés dedans, si l'appareil a été

exposé à la pluie ou à l'humidité, s'il ne fonctionne pas

normalement, ou s'il est tombé.

iL’appareil tire un courant nominal de veille de la prise

secteur quand son interrupteur POWER ou STANDBY/ON

n’est pas en position ON.

iLa fiche secteur est utilisée comme dispositif de

déconnexion et doit donc toujours rester disponible.

iDes précautions doivent être prises en cas d'utilisation

d'écouteurs ou d'un casque avec le produit car une

pression acoustique excessive (volume trop fort) dans

les écouteurs ou dans le casque peut causer une perte

auditive.

iSi vous rencontrez des problèmes avec ce produit,

contactez TEAC pour une assistance technique. N'utilisez

pas le produit tant qu'il n'a pas été réparé.

AVERTISSEMENT

Pour éviter d'éventuels dommages auditifs,

n'écoutez pas de façon prolongée à niveau

sonore élevé.

ATTENTION

iN'exposez pas cet appareil aux gouttes ni aux

éclaboussures.

iNe placez pas d'objet rempli de liquide sur l'appareil,

comme par exemple un vase.

iN’installez pas cet appareil dans un espace confiné

comme une bibliothèque ou un meuble similaire.

iL’appareil doit être placé suffisamment près de la prise

de courant pour que vous puissiez à tout moment

attraper facilement la fiche du cordon d'alimentation.

iSi le produit utilise des piles/batteries (y compris un pack

de batteries ou des batteries fixes), elles ne doivent pas

être exposées au soleil, au feu ou à une chaleur excessive.

iPRÉCAUTION pour les produits qui utilisent des batteries

remplaçables au lithium: remplacer une batterie par

18 TASCAM DR-40X

un modèle incorrect entraîne un risque d'explosion.

Remplacez-les uniquement par un type identique ou

équivalent.

PRÉCAUTIONS CONCERNANT LES PILES

Ce produit utilise des piles. Le mauvais usage des piles peut

provoquer une fuite, une rupture ou d'autres problèmes.

Respectez toujours les précautions suivantes pour l'emploi

de piles.

iNe rechargez jamais des piles non rechargeables. Les

piles peuvent se rompre ou fuir, risquant de causer un

incendie ou des blessures.

iLors de l’installation des piles, faites attention aux

indications de polarité (orientation plus/moins (¥/^))

et installez-les correctement dans le compartiment

des piles comme indiqué. Les installer à l’envers

peut entraîner la rupture ou la fuite des piles, source

d’incendie, de blessure ou de dégât autour d’elles.

iQuand vous rangez ou jetez des piles, isolez leurs bornes

avec de l'adhésif isolant ou avec un matériau équivalent

pour leur éviter d'entrer en contact avec d'autres piles ou

des objets métalliques.

iLorsque vous jetez des piles usagées, suivez les

instructions de mise au rebut indiquées sur les piles et

les lois locales sur l’enlèvement des ordures.

iN'utilisez pas d'autres piles que celles spécifiées. N'utilisez

pas en même temps des piles neuves et usagées, ni des

types de piles différents. Les piles peuvent se rompre ou

fuir, risquant de causer un incendie, des blessures ou des

dégâts autour d’elles.

iNe transportez pas et ne conservez pas des piles à côté

de petits objets métalliques. Les piles peuvent entrer

en court-circuit, provoquant une fuite, une rupture ou

d'autres problèmes.

iNe chauffez et ne démontez pas les piles. Ne les jetez pas

dans un feu ou dans de l’eau. Les piles peuvent se rompre

ou fuir, risquant de causer un incendie, des blessures ou

des dégâts autour d’elles.

iSi le liquide de la pile s’échappe, essuyez tout liquide

répandu dans le boîtier des piles avant d’insérer de

nouvelles piles. Si le liquide d’une pile touche un œil, il

peut entraîner une perte de la vue. Dans ce cas, rincez

abondamment à l’eau claire sans frotter l’œil et consultez

immédiatement un médecin. Si le liquide touche le

corps ou les vêtements d’une personne, il peut entraîner

des blessures ou brûlures cutanées. Si cela se produit,

rincez abondamment à l’eau claire puis consultez

immédiatement un médecin.

iL’alimentation de l’unité doit être coupée quand vous

installez ou remplacez des piles.

iRetirez les piles si vous envisagez de ne pas utiliser

l’unité durant une période prolongée. Les piles peuvent

se rompre ou fuir, risquant de causer un incendie, des

blessures ou des dégâts autour d’elles. Si le liquide de

la pile s’échappe, essuyez tout liquide répandu dans le

boîtier des piles avant d’insérer de nouvelles piles.

iNe démontez pas une pile. L'acide qu'elle contient peut

entraîner des blessures cutanées ou des dommages aux

vêtements.

Pour les consommateurs européens

Mise au rebut des équipements électriques

et électroniques

(a) Tous les équipements électriques et électroniques

doivent être traités séparément de la collecte

municipale d'ordures ménagères dans des points de

collecte désignés par le gouvernement ou les autorités

locales.

(b) En vous débarrassant correctement des équipements

électriques et électroniques, vous contribuerez à la

sauvegarde de précieuses ressources et à la prévention

de potentiels effets négatifs sur la santé humaine et

l'environnement.

(c) Le traitement incorrect des déchets d'équipements

électriques et électroniques peut avoir des effets graves

sur l'environnement et la santé humaine en raison

de la présence de substances dangereuses dans les

équipements.

(d) Le symbole de poubelle sur roues barrée

d'une croix indique que les équipements

électriques et électroniques doivent être

collectés et traités séparément des déchets

ménagers.

(e) Des systèmes de retour et de collecte sont disponibles

pour l'utilisateur final. Pour des informations plus

détaillées sur la mise au rebut des vieux équipements

électriques et électroniques, veuillez contacter votre

mairie, le service d'ordures ménagères ou le magasin

dans lequel vous avez acheté l'équipement.

Mise au rebut des piles et/ou

accumulateurs

(a) Les piles et/ou accumulateurs hors d'usage doivent être

traités séparément de la collecte municipale d'ordures

ménagères dans des points de collecte désignés par le

gouvernement ou les autorités locales.

(b) En vous débarrassant correctement des piles et/ou

accumulateurs hors d'usage, vous contribuerez à la

sauvegarde de précieuses ressources et à la prévention

de potentiels effets négatifs sur la santé humaine et

l'environnement.

(c) Le traitement incorrect des piles et/ou accumulateurs

hors d'usage peut avoir des effets graves sur

l'environnement et la santé humaine en raison de la

présence de substances dangereuses.

(d) Le symbole de poubelle sur roues barrée d'une croix

indique que les piles et/ou accumulateurs doivent être

collectés et traités séparément des déchets ménagers.

Si la pile ou l'accumulateur contient plus

que les valeurs de plomb (Pb), mercure

(Hg) et/ou cadmium (Cd) spécifiées dans la

directive sur les piles (2006/66/CE), alors les

symboles chimiques de ces éléments

seront indiqués sous le symbole de

poubelle sur roues barrée d'une croix.

(e) Des systèmes de retour et de collecte sont disponibles

pour l'utilisateur final. Pour des informations plus

détaillées sur la mise au rebut des piles et/ou

accumulateurs, veuillez contacter votre mairie, le

service d'ordures ménagères ou le magasin dans lequel

vous les avez achetés.

Pb, Hg, Cd

TASCAM DR-40X 19

Introduction

Merci beaucoup d'avoir choisi l'enregistreur PCM linéaire

DR-40X TASCAM.

Afin d'utiliser correctement cette unité et d'en profiter

durant de nombreuses années, commencez par lire

attentivement ce mode d'emploi. Une fois la lecture de ce

mode d'emploi terminée, veillez à le conserver en lieu sûr

pour référence ultérieure.

Note à propos du manuel de référence

Ce mode d'emploi explique les principales fonctions de

cette unité. Veuillez consulter le manuel de référence pour

des informations sur toutes les fonctions de l'unité.

Vous pouvez aussi télécharger ce mode d'emploi et le

manuel de référence depuis le site mondial de TEAC

(http://teac-global.com/).

Éléments fournis avec ce produit

Ce produit est livré avec les éléments suivants.

Ouvrez l'emballage avec soin pour ne pas les endommager.

Conservez les matériaux d'emballage pour de futurs

transports.

Si un élément quelconque est manquant ou a été

endommagé durant le transport, veuillez contacter le

magasin dans lequel vous avez acheté cette unité.

iUnité principale ........................................................................ × 1

iPiles alcalines AA ......................................................................× 3

iPied d'inclinaison ..................................................................... × 1

iMode d'emploi (ce document) incluant la garantie ....× 1

Attention à la condensation

De la condensation peut se produire si l’unité est déplacée

d’un endroit froid à un endroit chaud, est utilisée dans

une pièce qui vient d’être chauffée ou soumise à des

changements brutaux de température. Pour empêcher cela

ou si cela se produit, laissez l’unité une ou deux heures à la

température de la nouvelle pièce avant de l’utiliser.

Précautions concernant

l'emplacement et l'emploi

iLa plage de température de fonctionnement de cette

unité est de 0 - 40°C.

iNe placez pas cette unité dans les types d'emplacement

suivants. Cela pourrait dégrader la qualité sonore ou

causer des mauvais fonctionnements.

Lieux sujets à des vibrations importantes

Près de fenêtres ou en exposition directe au soleil

Près de chauffages ou dans des lieux extrêmement

chauds

Lieux extrêmement froids

Lieux mal ventilés ou très humides

Lieux très poussiéreux

Emplacements exposés directement à la pluie ou à

l'eau

iNe placez pas cette unité sur un amplificateur de

puissance ou un autre appareil générant de la chaleur.

iSi cette unité est placée près d'un amplificateur de

puissance ou d'un autre appareil à gros transformateur,

cela peut entraîner un ronflement. Dans ce cas, éloignez

cette unité de l'autre appareil.

iSi on l'utilise à proximité d'un récepteur de télévision

ou de radio, cette unité peut entraîner des irrégularités

de couleur ou des parasites. Si cela se produit, éloignez

l'unité.

iCette unité peut produire des parasites si un téléphone

mobile ou autre appareil sans fil est utilisé à proximité

pour passer des appels ou envoyer ou recevoir des

signaux. Dans ce cas, éloignez cette unité des autres

appareils ou éteignez ces derniers.

Nettoyage de l’unité

Pour nettoyer l’unité, essuyez-la délicatement avec un

chiffon sec et doux. Ne l’essuyez pas avec des lingettes de

nettoyage contenant des produits chimiques, du diluant,

de l’alcool ou d’autres agents chimiques. Cela pourrait

endommager la surface ou causer une décoloration.

Sommaire

Introduction ................................................................ 19

Note à propos du manuel de référence .................... 19

Éléments fournis avec ce produit .............................. 19

Précautions concernant l'emplacement et l'emploi 19

Attention à la condensation ...................................... 19

Nettoyage de l'unité ................................................... 19

Nomenclature et fonctions des parties .................... 20

Face supérieure ........................................................................20

Face avant ................................................................................... 20

Face latérale gauche ...............................................................20

Face latérale droite ..................................................................21

Face inférieure ........................................................................... 21

Préparatifs ................................................................... 21

Installation des piles ...............................................................21

Insertion d'une carte ..............................................................21

Allumage de l'unité .................................................................21

Emploi des microphones intégrés .....................................22

Montage de la cale d'inclinaison ........................................23

Présentation des écrans ............................................. 23

Emploi du menu .......................................................... 24

Enregistrement ........................................................... 24

Réglage du mode d’enregistrement .................................24

Emploi du filtre coupe-bas ...................................................25

Réglage du limiteur .................................................................25

Lecture des enregistrements ..................................... 26

Sélection de fichiers ................................................................ 26

Emploi comme interface audio..................................27

Préparation.................................................................................27

Connexion ..................................................................................27

Écoute de contrôle (monitoring) ........................................27

Déconnexion .............................................................................27

Guide de dépannage .................................................. 28

Caractéristiques techniques ...................................... 29

Données ......................................................................................29

Entrées et sorties ...................................................................... 29

Performances audio ................................................................29

Durées d'enregistrement ......................................................30

Autres caractéristiques ..........................................................30

20 TASCAM DR-40X

Nomenclature et fonctions des

parties

Face supérieure

1 Microphone stéréo intégré

2 Voyant DUAL

3 Voyant 4CH

4 Voyant OVER DUB

5 Touche 3/4 [SOLO]

Sélectionne et met en solo les canaux 3/4.

6 Touche 1/2 [SOLO]

Sélectionne et met en solo les canaux 1/2.

7 Touche ¤ (HOME)[8]

Pressez cette touche pour arrêter, allumer/éteindre

l’unité (¤) et ouvrir l'écran d'accueil (HOME).

8 Touche +

Plus/haut.

9 Touche MENU

Ouvre l’écran MENU.

0 Touche .

Recherche en arrière/gauche/annulation.

q Touche PB CONT

Ouvre l’écran de contrôle de lecture.

w Touche −

Moins/Bas.

e Écran

r Voyant PEAK

S’allume quand le niveau d'enregistrement est trop

élevé.

t Touche REC MODE

Ouvre l'écran de menu du mode d’enregistrement.

y Touche RECORD [0]/voyant REC

Affiche le statut d’enregistrement.

u Touche PLAY [7]

Déclenche la lecture.

i Touche QUICK

Ouvre le menu rapide (Quick).

o Touche /

Recherche en avant/droite/validation.

p Touche ENTER/MARK

Placement/effacement de marqueurs.

a Touche MIXER

Ouvre l'écran du mélangeur.

Face avant

s Prises EXT MIC/LINE IN

(XLR/jack 6,35



mm 3



points TRS)

Prise d'entrée micro/externe.

d

Prise REMOTE

(mini-jack 3points TRS de 2,5mm de diamètre)

Face latérale gauche

f

Prise /LINE OUT

Prise de sortie casque/ligne.

g Sélecteur EXT IN

h Commutateur HOLD

Règle la fonction de verrouillage.

j Touches INPUT LEVEL (+/−)

ページが読み込まれています...

Tascam DR 40X 取扱説明書

Tascam DR 40X 取扱説明書

他の言語で

関連論文

その他のドキュメント