Midea R410A 取扱説明書

ブランド: Midea

モデル: R410A

カテゴリー: モバイルエアコン

タイプ: 取扱説明書

Midea R410Aは、快適でエネルギー効率の高い冷却ソリューションを提供するリモコン式窓用エアコンです。この装置は、素早い冷却と効率的なパフォーマンスを実現するために設計されたR410A冷媒を使用しています。

Midea R410Aは、さまざまな機能を備え、ユーザーが快適な室温を維持できるようにします。3段階の冷却速度とスリープタイマーにより、ユーザーは自分のニーズに合わせて冷却をカスタマイズできます。また、LEDディスプレイとリモコンにより、温度やその他の設定を簡単に調整できます。

さらに、Midea R410Aは設置とメンテナンスが簡単です。取扱説明書に従えば、数分で設置できます。また、フィルターは簡単にアクセスできるので、定期的な清掃とメンテナンスが簡単です。

Midea R410Aは、信頼性が高く、エネルギー効率の高い冷却ソリューションをお探しの方に最適な選択肢です。

R410A Remote type--

WINDOW TYPE ROOM AIR CONDITIONER

R410A 遥控式--窗口式冷氣機

Owner’s Manual &Installation Manual

使用說明書及安裝說明書

Before using your air conditioner, please read

this manual carefully and keep it for future

reference.

在使用冷氣機之前，請仔細閱讀該說明書，並保

存好以備所需。

CONTENTS

SAFETY PRECAUTIONS

UNIT PARTS IDENTIFICATION

OPERATING INSTRUCTIONS

INSTALLATION INSTRUCTIONS

TROUBLESHOOTING

SPECIFICATIONS

Read This Manual

Inside you will find many helpful hints on how to use and maintain your air conditioner properly. Just

a little preventive care on your part can save you a great deal of time and money over the life of

your air conditioner. You'll find many answers to common problems in the chart of troubleshooting

tips. If you review our chart of Troubleshooting Tips first, you may not need to call for service at all.

ENVIRONMENT

From 31 December 2018, the disposal licensing control, import and export permit control and

landfill disposal ban in respect of abandoned regulated electrical equipment (REE) have

commenced. Any person who is engaged in the storage, treatment, reprocessing or recycling of

abandoned REE must obtain a waste disposal licence; a permit is required for the import and

export of abandoned REE; and abandoned REE is no longer be accepted for disposal

at the landfills and other designated waste disposal facilities (e.g. refuse transfer stations).

WARNING

 Plug in power plug properly. Otherwise, it may cause electric shock or fire due to excess heat

generation.

 Do not operate or stop the unit by inserting or pulling out the power plug. It may cause electric

shock or fire due to heat generation.

 Do not damage or use an unspecified power cord. It may cause electric shock or fire. If the

power cord is damaged, it must be replaced by the manufacturer or an authorized service

centre or a similarly qualified person in order to avoid a hazard.

 Do not modify power cord length or share the outlet with other appliances. It may cause

electric shock or fire due to heat generation.

 Do not operate with wet hands or in damp environment. It may cause electric shock.

 Unplug the unit or disconnect the power supply to the unit, if strange sounds, smell, or smoke

comes from it. It may cause fire and electric shock.

 Do not use the socket if it is loose or damaged. It may cause fire and electric shock.

 Leave the door closed while the air conditioner is running. It is not designed to cool the entire

house.

 Do not use the power cord close to heating appliances. It may cause fire and electric shock.

 Do not use the power cord near flammable gas or combustibles, such as gasoline, benzene,

thinner, etc. It may cause an explosion or fire.

 Ventilate room before operating air conditioner if there is a gas leakage from another

appliance. It may cause explosion, fire and burns.

 Do not disassemble or modify unit. It may cause failure and electric shock.

 The appliance shall be installed in accordance with national wiring regulations.

 If connecting power to fixed wiring, an all-pole disconnection device which has at least 3mm

clearances in all poles, and have a leakage current that may exceed 10mA, the residual

current device(RCD) having a rated residual operating current not exceeding 30mA, and

disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.

 The unit s circuit board (PCB) is designed with a fuse to provide overcurrent protection. The

specifications of the fuse are printed on the circuit board, such as: T 3.15A/250V, etc.

 This appliance can be used by children aged from 8 years and above and persons with

reduced physical, sensory or mental capabilities or lack of experience and knowledge if they

have been given supervision or instruction concerning use of the appliance in a safe way and

understand the hazards involved. Children shall not play the appliance. Cleaning and user

maintenance shall not be made by children without supervision. (EN Standard requirements)

 This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities or lack of experience and knowledge, unless they have been

given supervision or instruction concerning use of the appliance by a person responsible for

their safety. (IEC Standard requirements)

 Children should be supervised to ensure that they do not play with the appliance.

 If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or

similarly qualified persons in order to avoid a hazard.

 The appliance shall be installed in accordance with national wiring regulations.

 Do not operate this appliance in a wet room such as a bathroom or laundry room.

 The appliance with electric heater shall have at least 1-meter space to the combustible

materials.

 Contact the authorized service technician for repair or maintenance of this unit.

SAFETY PRECAUTIONS...

To prevent injury to the user or other people and property damage, the following instructions must

be followed. Incorrect operation due to ignoring of instructions may cause harm or damage. The

seriousness is classified by the following indications.

WARNING

This symbol indicates the possibility of death or serious injury.

CAUTION

This symbol indicates the possibility of injury or damage to property.

Meanings of symbols used in this manual are as shown below.

Never do this.

Always do this.

WARNING

Plug in power plug

properly.

Do not operate or stop

the unit by inserting or

pulling out the power plug.

Do not damage or use an

unspecified power cord.

Otherwise, it may cause

electric shock or fire due

to excess heat

generation

It may cause electric shock

or fire due to heat

generation.

It may cause electric shock or fire.

If the power cord is damaged, it must

be replaced by the manufacturer or an

authorized service centre or a similarly

qualified person in order to avoid a

hazard.

Do not modify power

cord length or share the

outlet with other

appliances.

Do not operate with

wet hands or in damp

environment.

Do not direct airflow at room

occupants only.

It may cause electric

shock or due to heat

generation.

It may cause electric

shock.

This could damage your health.

Always ensure

effective earthing.

Do not allow water to

run into electric parts.

Always install circuit breaker and a

dedicated power circuit.

Incorrect earthing may

cause electric shock.

It may cause failure of

machine or electric shock.

Incorrect installation may cause fire

and electric shock.

Unplug the unit if

strange sounds, smell, or

smoke comes from it.

Do not use the socket

if it is loose or damaged.

Do not open the unit during

operation.

It may cause fire and

electric shock.

It may cause fire and

electric shock

It may cause electric shock.

Leave the door

closed while the air

conditioner is running.

Do not use the power

cord close to heating

appliances.

Do not use the power cord near

flammable gas or combustibles, such

as gasoline, benzene, thinner, etc.

It is not designed to cool

the entire house.

It may cause fire and

electric shock.

It may cause an explosion or fire.

Ventilate room before operating air

conditioner if there is a gas leakage from

another appliance.

Do not disassemble or modify unit.

It may cause explosion, fire and, burns.

It may cause failure and electric shock.

CAUTION

When the air filter is

to be removed, do not

touch the metal parts of

the unit.

Do not clean the air

conditioner with water.

Ventilate the room well when

used together with a stove, etc.

It may cause an injury.

Water may enter the unit and

degrade the insulation. It may

cause an electric shock.

An oxygen shortage may occur.

When the unit is to

be cleaned, switch off,

and turn off the circuit

breaker.

Do not put a pet or house

plant where it will be exposed

to direct air flow.

Do not use for special purposes.

Do not clean unit when

power is on as it may

cause fire and electric

shock, it may cause an

injury.

This could injure the pet or

plant.

Do not use this air conditioner to

preserve precision devices, food,

pets, plants, and art objects. It may

cause deterioration of quality, etc.

Stop operation and

close the window in

storm or hurricane.

Hold the plug by the

head of the power plug when

taking it out.

Turn off the main power switch

when not using the unit for a long

time.

Operation with windows

opened may cause

wetting of indoor and

soaking of household

furniture.

It may cause electric shock

and damage.

It may cause failure of product or

fire.

Do not place obstacles

around air-inlets or inside

of air-outlet.

Ensure that the

installation bracket of the

outdoor appliance is not

Always insert the filters

securely. Clean filter once every two

weeks.

It may cause failure of

appliance or accident.

If bracket is damaged, there

is concern of damage due to

falling of unit.

Operation without filters may cause

failure.

Do not use strong

detergent such as wax or

thinner but use a soft

cloth.

Do not place heavy

object on the power cord and

ensure that the cord is not

compressed.

Do not drink water drained from

air conditioner.

Appearance may be

deteriorated due to

change of product color

or scratching of its

surface.

There is danger of fire or

electric shock.

It contains contaminants and could

make you sick.

Use caution when unpacking and

installing. Sharp edges could cause injury.

If water enters the unit, turn the unit off at the

power outlet and switch off the circuit breaker. Isolate

supply by taking the power-plug out and contact a

qualified service technician.

Preparing for operation

1. Contact an installation specialist for installation.

2. Plug in the power plug properly.

3. Do not use a damaged or non-standard power cord.

4. Do not share the same outlet with other appliances.

5. Do not use an extension cord.

6. Do not start/stop operation by plugging/unplugging the power cord.

Usage

1. Exposure to direct airflow for an extended period of time could be hazardous to your health.

Do not expose occupants, pets, or plants to direct airflow for extended periods of time.

2. Due to the possibility of oxygen deficiency, ventilate the room when used together with stoves

or other heating devices.

3. Do not use this air conditioner for non-specified special purposes (e.g. preserving precision

devices, food, pets, plants, and art objects). Usage in such a manner could harm such property.

Cleaning and maintenance

1. Do not touch the metal parts of the unit when removing the filter. Injuries can occur when

handling sharp metal edges.

2. Do not use water to clean inside the air conditioner. Exposure to water can destroy the

insulation, leading to possible electric shock.

3. When cleaning the unit, first make sure that the power and circuit breaker are turned off.

Operating Temperature

Cooling operation

Outdoor temp:

18-43 ºC

Indoor temp:

17-32 ºC

Heating operation

Outdoor temp:

-5-24 ºC

Indoor temp:

0 -27 ºC

Note: Performance may be reduced outside of these operating temperatures.

UNIT PARTS IDENTIFICATION

NOTE: The front panel and cabinet may be slightly different according to the models, but the

functions are the same. The following illustration is for explanation purpose only, the actual shape

of the machine you purchased may be slightly different.

1. Front panel

2. Air filter

3. Frame

4. Cabinet

5. Air inlet grille (outdoor side)

6. Air outlet grille

7. Electronic control keypad

8. Power supply cord

9. Control panel cover

10. Remote control

1. Power cord conductors are distinguished according to color as follows (see Fig.1)

2. For your safety and protection, this unit is earthed through the power cord (see Fig.2)

Please contact the manufacturer or its service agent or a similar qualified person if you

want to replace it.

3. Be sure that the unit being correctly grounded. The wall outlet (Air-break switch) should be

provided with reliable earth wire.

4. The unit should be provided with an individual circuit and the circuit breaker/fuse rating

should be the same as that of the power cord and wall outlet.

Accessories

NOTE: Optional parts ( ), depending on model you purchased.

NOTE: All the illustrations in the manual are for explanation purpose only.

Your air conditioner may be slightly different. The actual shape shall prevail.

POWER

CORD

E-Earth wire, yellow/green

N-Neutral wire, blue

L-Active wire, brown

Fig.1

Fig. 2

Wall outlet

Air-break switch

OPERATING INSTRUCTIONS

Controls

The electronic control keypad will look like one of the following:

7000~9000Btu/h 11000~24000Btu/h

NOTE: The outline of the operation panel is based on typical model, the function is the same with your air

conditioner while some difference may exist in appearance.

Vent Control

The vent control is located above the control knobs. The operation method is different on different

models (see the following figures).

For maximum cooling efficiency, CLOSE the vent. This will allow internal air circulation.

OPEN the vent to discharge stale air.

To open the vent, set the lever to the right position.

To close it, set the lever in the left position.

To open the vent, pull the lever toward you

To close it, push it in.

OPERATING INSTRUCTIONS

POWER:

Press the POWER keypad to turn the unit on/off.

(The TIMER keypad controls the auto start/stop feature of the unit.)

MODE:

Press the "MODE" keypad to select the appropriate operating mode. The mode selection

will alternate between AUTO, HEAT, COOL, FAN and DRY. The green indicator light

beside the "MODE" option will illuminate, identifying the mode selected.

When using the DRY and AUTO mode, you cannot select a fan speed. The fan motor

operates on LOW speed in DRY mode and on MED speed in AUTO mode. Some models

without MED speed, the fan motor operates on HIGH speed in AUTO mode.

TEMPERATURE SETTINGS UP:

Press the keypad to increase the set (operating) temperature of the unit.

Each time the keypad is pressed the temperature increases as follows:

1 ºC (Celsius Scale) Maximum Setting 30 ºC

TEMPERATURE SETTINGS DOWN:

Press the keypad to decrease the set (operating) temperature of the unit.

Each time the keypad is pressed the temperature decreases as follows:

1 ºC (Celsius Scale) Minimum Setting 17 ºC

FAN:

Press this keypad to activate the appropriate fan speed setting. Each depression of the

keypad will alternate through LOW, MED (some models without), HIGH fan speed options.

The green indicator light beside the FAN speed option will illuminate, identifying the fan

speed selected.

SWING

Press the "SWING" keypad to activate the automatic air swing (oscillation) feature. The

green indicator light adjacent to the "SWING" keypad will illuminate, identifying to the

selected mode is operational. The vertical louvers will oscillate back and forth (side to

side) automatically sweeping air alternately for comfortable cooling. To stop the air swing

feature, press the "SWING" keypad again, the green indicator light adjacent to the keypad

will go off. Press the "SWING" keypad for 2 seconds will activate the SLEEP mode which

can reduce noise creating a comfortable sleeping environment.

When the SLEEP mode is activated, the green indicator light beside the "SLEEP" function

will illuminate.

TIMER:

Press the "TIMER" keypad to activate the "auto start/auto stop" timer function. Auto

start/stop programs can be set from 0~24 hours. Each depression of the "TIMER" keypad

will increase or decrease the selected time in 0.5 hour increments up to 10 hours, then by

1 hour increments up to 24 hours.

DRY:

This mode is used to decrease the humidity in the room. Under this mode, you cannot

select a fan speed. The fan motor operates at LOW speed. Keep windows and doors

closed for the best dehumidifying effect.

COOLING:

The temperature setting are adjustable between 17ºC to 30ºC. You can select your

desired fan speed.

HEATING:

The temperature setting are adjustable between 17ºC to 30ºC. You can select your

desired fan speed.

AUTO:

The fan motor remains on MED speed in AUTO mode. The unit will select the appropriate

operating mode from FAN, COOL or HEAT (For reverse cycle models only) based upon

the temperature difference between the actual and desired room temperature. Some

models without MED speed, the fan motor operates on HIGH speed in AUTO mode.

SLEEP:

For the models with SWING feature, press and hold the "SWING" keypad for 2 seconds

or use the remote control to activate the "SLEEP" feature.

Press and hold the "SWING" keypad for 2 seconds again or use the remote control

again to deactivate the "SLEEP" feature. For units without “SWING" feature, use the

remote control to activate the "SLEEP" feature.

In the Cooling mode, the cooling temperature set point will increase 1ºC per hour after the

“SLEEP" mode is selected. Two hours later, the set point will continue at this temperature

and the fan motor will remain on LOW speed.

In the Heating mode, the heating temperature set point will decrease 1ºC per hour after

the "SLEEP" mode is selected. Two hours later, the set point will continue at this

temperature and the fan motor will remain on LOW speed.

Using the "SLEEP" mode will reduce noise creating a comfortable sleeping environment.

Note: This feature is not available under DRY and FAN ONLY operation.

LED Display:

Shows the temperature setting or Auto-timer setting, after 10 seconds, shows the

room temperature (on some models) or set temperature (on some models).

Horizontal air flow adjustment (manually)

To adjust vertical air flow direction of the up or low horizontal

louvers, adjust any one of the up or low horizontal louver blades.

Air Filter

The air filter behind the inlet grille should be checked and

cleaned at least once every 2 weeks (or as necessary) to

maintain optimal performance of the air conditioner.

How to remove the air filter

1. Hold the tabs under the front panel, then uplift it outwards,

and remove the front panel.

2. Pinch the handle under the air filter and make the air filter

arched, remove it from the slot from underside to upside.

3. Clean the filter with warm, soapy water. The water should be

below 40OC to prevent distortion of the filter.

4. Rinse off and gently shake off excess water from the filter.

Allow the filter to dry before replacing it. To prevent distortion of

the filter, do not dry in direct sunlight.

CAUTION

NEVER operate the air conditioner without the

air filter, as dust/dirt particles can contribute to

equipment failure.

CONTROL PANEL COVER

Grasp the right of the control panel cover and

pull it upwards to open it.

Close the control panel cover and press the

right of the cover again until it snaps into the

locked position.

INSTALLATION INSTRUCTIONS

Select the best location

1. To avoid vibration and noise, make sure the unit is installed securely and firmly.

2. Install the unit where the sunlight does not shine directly on the unit. If the unit receives

direct sunlight, build an awning to shade the cabinet. The awning is at least 15cm away from

the air inlet at the top of the unit.

3. There should be no obstacle, such as a fence or wall, within 50cm from the back of the

cabinet because it will prevent heat radiation of the condenser.

Restriction of outside air will greatly reduce the cooling and heating efficiency of the air

conditioner.

4. Install the unit a little obliquely outward not to leak the condensed water into the room (about

10mm or 1/4 bubble with level).

5. Install the unit with its bottom portion 75~150cm above the floor level.

6. The power cord must be connected to an independent circuit. The yellow/green wire must be

grounded.

All side louvers of the cabinet must remain exposed to the outside of the structure.

Installation of the Housing

Step 1

Remove the air conditioner from it's packaging, remove

fixing screws and slide the air conditioner out of it's

housing (Refer to Installation Steps).

Step 2

Prepare the hole in the wall so that the bottom of the

housing is well supported, the top has minimum clearance

and the air inlet louvers have clearance as shown below

in options A and B. Holes from the outside through to

the cavity should be sealed. The housing should slope

down towards the rear by about 5mm to allow water

formed during operation to drain.

CAUTION

Step 3

Install the housing into the wall and secure. Ensure the

foam seals are not damaged. Flash, seal or fill gaps

around the inside and outside to provide satisfactory

appearance and protection against the weather, insects

and rodents.

Installation of the unit into the Housing

1. Slide the unit into the housing until it is firmly

against the rear of the housing. Care is required to

ensure the foam sealing strips on the housing remain in

position.

2. Connect the air conditioner to the power and

position excess cord length beneath the air conditioner

base.

3. Engage the chassis fixing brackets into the bottom

housing rail and secure to the base with the screw

provided.

4. Remove the front panel from it's carton and plastic

bag and fit as per the Installation instruction.

5. Switch unit on. Check for operation of the unit and

check for vibration in the installation.

6. Fit the drain pan to the housing and run a drain line

to a suitable location if required.

Installations of the unit into the wall

Installation Steps

Step 1. Remove the front panel and the air filter

1. Hold the tabs under the front panel, then uplift it outwards, and remove the front panel (See

Fig.1).

2. Pinch the handle under the air filter and make the air filter arched, remove it from the slot from

underside to upside (See Fig.2).

Step 2. Remove the frame.

1. Remove the two fixing screws from the frame (See Fig.3).

2. Grasp the left corner of the frame's underside, release the coupler plugs, then loosen the

frame (See Fig.4).

Step 3. Installation.

1. Remove the two fixing screws on the chassis fixing brackets, then remove the chassis fixing

brackets (See Fig.5).

2. Grasp the handle on the chassis and carefully slide the air conditioner out of the cabinet (See

Fig.6).

3. Remove shipping pad from around compressor before operation and make sure the discharge

points to the drain pan are aligned before the chassis is pushed into the cabinet (See Fig.7).

4. Push the unit chassis into the cabinet (See Fig.8).

5. Install the two chassis fixing brackets using the two fixing screws (See Fig.5).

Step 4. Install the frame.

1. Install the frame and connect the coupler plugs, making sure

not to interfere with the temperature sensor cable (See Fig.9).

2. Fix the screws on the frame (See Fig.3).

Step 5. Install the air filter and front panel.

1. Install the air filter into the frame's slot from upside to underside

(See Fig.2).

2. Hang the front panel on the frame's buckle, then press the front

panel into the frame's slot until you hear a click (See Fig10).

Installation Steps Option: Power Cord Come Out from Left Side

Step 1. Install the power cord

1. Pull the power cord to the left side straightly (See Fig.1C 2C.).

2. Wrap the PVC protecting sheath on the power cord with ribbing in the hole position (See

Fig.3C).

Step 2. Tie up the power cord on the frame (Just for the body dimension 600*380*560)

1. Tie up the power cord on the frame (See Fig.5C 6C.).

Step 3. Install the frame the front panel

1. These steps is same as right side. (See Fig.4C.).

Drainage

To treat condensed water will be as follows:

1. Bottom drainage. Connect drain hose to the bottom drain tray. It

will slightly affect cooling performance, but will reduce the noise

caused by spraying the condensed water.

Note: Only optional for models with bottom drain hole.

For pump heating, the bottom drainage must be choosing.

2. Back drainage. Connect drain hose to the back drainage hole.

It will slightly affect cooling performance, but will reduce the noise caused by spraying the condensed water.

3. Non-drainage. Block the drain hole(s) by rubber plug(s).

The condensed water will be sprayed to condenser, and will improve the cooling performance.

Installation procedures of bottom drainage:

-Remove the rubber plug from the bottom of cabinet (if installed).

-Take out the drain tray and screws from accessary.

-Fix the drain tray onto the bottom of cabinet by screws.

-Connect an extension drain hose (locally purchased) to the outlet of drain tray.

Installation procedures of back drainage:

-Fit the seal (provided as accessory) onto the drain joint.

-Insert the drain joint to the back drainage hole, and rotate it by 90°to be well fitted.

-Connect an extension drain hose (locally purchased) to the drain joint.

-Make sure block the bottom drain hole by rubble plug.

Note: Drain hose is locally purchased according to installation length request.

NOTE: If you choose non-drainage when cooling, both the bottom

and the back drain holes of the unit should be inserted with

rubber plugs. When you choose non-drainage the air conditioner

will be perfect cooling efficiency, but big noise may be caused by

spraying the condensed water. Does not recommend to use.

NOTE: The rated cooling performance is tested under non-

drainage status.

NOTE: Make sure that water will not leak from the

surrounding area when rubber plug and joint were used.

Please seal it in case leakage is found.

TROUBLESHOOTING

Troubleshooting Tips

Save time and money! Review the chart below first and you may not need to call for service.

Normal Operation

 You may hear a pinging noise caused by water being picked up and thrown against the

condenser on rainy days or when the humidity is high. This design feature helps remove

moisture and improve efficiency.

 You may hear the thermostat click when the compressor cycles on and off.

 Water will collect in the base pan during high humidity or on rainy days .The water may

overflow and drip from the outdoor side of the unit.

 The fan may continue to operate when the compressor has cycled off.

Problem

Possible Causes

What To Do

Air conditioner

does not start

 The air conditioner is

unplugged.

 Make sure the air conditioner plug is

pushed completely into the outlet and

switched on.

 The fuse is blown/

circuit breaker is

tripped.

 Check the house fuse/circuit breaker box

and replace the fuse or reset the breaker.

 Power failure.

 If power failure occurs, switch off and

disconnect /unplug the power cord. When

power is restored, reconnect (plug in) the

power cord, switch on the power and wait 3

minutes to restart the air conditioner to

prevent tripping of the compressor

overload.

Air conditioner

does not cool

as it should

 Airflow is restricted.

 Make sure there are no curtains, blinds, or

furniture blocking the front of the air

conditioner.

 The air filter is dirty.

 Clean the filter at least every 2 weeks.

 See the operating instructions section.

 The room may have

been hot.

 When the air conditioner is first turned on

you need to allow time for the room to cool

down.

 Cold air is escaping.

 Check for open furnace floor registers and

cold air returns.

 Set the air conditioner's vent to the closed

position.

 Cooling coils have

iced up.

 See Air Conditioner Freezing Up below.

Air conditioner

freezing up

 Ice blocks the air flow

and stops the air

conditioner from

cooling the room.

 Set the fan at MED or HIGH until the ice

melts.

Failure Indicator Display:

Indicates a malfunction of the indoor room temperature sensor.

Indicates a malfunction of the evaporator temperature sensor.

Indicates a malfunction of the outdoor condenser temperature sensor.

Indicates frosting protection (Turn off the unit and restart it to return to normal operation).

Note:

When one of the above malfunctions occurs, turn off the unit, and check for any obstructions.

Restart the unit, if the malfunction is still present, turn off the unit and unplug the power cord.

Contact the manufacturer or its service agents or a similar qualified person for service.

SPECIFICATIONS

Unit dimensions:

MODEL(Btu/h)

BODY DIMENSION(mm)

(W x H x D)

WIRING SIZE

(mm 2)

7000

450x346x585

≥ 3*1.5

9000

600x380x560

≥ 3*1.5

12000

660x428x680

≥ 3*1.5

18000

660x428x780

≥ 3*2.5

Minimum nominal cross-sectional area of conductors:

Nominal cross-sectional area

(mm2)

Rated current of

appliance (A)

0.75

>3 and ≤6

1.0

>6 and ≤10

1.5

>10 and ≤16

2.5

>16 and ≤25

安全預防措施

冷氣機零件名稱

操作指引

安裝指引

故障處理

技術參數

閱讀本手冊

本手冊提供了許多有關冷氣機正確使用與維護的實用提示。衹要稍加注意，就能延

長冷氣機的使用壽命，大大節省時間與金錢。在故障處理提示表中，您可以找到許

多常見問題的解答。事先瀏覽以下故障處理提示，也許就不必進行維修了。

環境保護

2018 年12 月31 日起，被棄置受管制電器處置管制、進出口管制及堆填區棄置

禁令正式實施。任何人貯存、處理、再加工或循環再造被棄置受管制電器，均須取

得廢物處置牌照；輸入及輸出被棄置受管制電器均須領有許可證。堆填區及其他指

定廢物處置設施（例如廢物轉運站）則不會再接收和處置被棄置受管制電器。

ページが読み込まれています...

Midea R410A 取扱説明書

ブランド: Midea

モデル: R410A

カテゴリー: モバイルエアコン

タイプ: 取扱説明書

Midea R410Aは、信頼性が高く、エネルギー効率の高い冷却ソリューションをお探しの方に最適な選択肢です。

PDFをダウンロードします

報告

他の言語で

English: Midea R410A Owner's manual

Midea R410A 取扱説明書

Midea R410A 取扱説明書

他の言語で

その他のドキュメント