Mark Levinson NO519 取扱説明書

AUDIO PLAYER OWNER’S MANUAL

N

0

519

1

N

O

519 AUDIO PLAYER / OWNER’S MANUAL

ENGLISH

TABLE OF CONTENTS / ABOUT THIS DOCUMENT

TABLE OF CONTENTS

About This Document 1

Special Design Features 2

Installation Considerations 3

Unpacking, Placement and Ventilation, Power Requirements, Operating States, Updates

Getting Started 5

Front-Panel Overview, Rear-Panel Overview, Remote Control Overview

Quick Setup and Listen 10

Remote Control, Initial Connections, A Note about DSD Files, Wi-Fi Setup, Bluetooth Setup, Using Spotify Connect, Using TIDAL,

Deezer, and Qobuz

Settings 16

Troubleshooting 19

Specifications 21

This Owner’s Manual covers unboxing of, familiarization with,

and configuration of your audio player. This manual will enable

you to finely tailor the behavior and performance of the unit to

fit your preferences and the particulars of your equipment and

listening room. It is strongly recommended that you follow this

manual in the order in which it is written so that you understand

safety considerations before configuring this sophisticated

audio player.

ABOUT THIS DOCUMENT

2

N

0

519 AUDIO PLAYER / OWNER’S MANUAL

SPECIAL DESIGN FEATURES

Thank you for purchasing a Mark Levinson № 519 Audio Player.

This remarkable product is ready to take you on a journey of

music discovery by combining Mark Levinson’s unsurpassed

audio performance with flexible access to virtually all digital

music sources. With impressive flexibility and the convenience

of an integrated digital volume control and headphone output,

the № 519 can serve as the heart of your high-performance

music system.

Connected Playback

The № 519 Audio Player offers a comprehensive selection of

music content access thanks to wired and wireless streaming,

slot-loading disc player, and high-resolution DAC with multiple

inputs. You can play music from streaming services, storage on

your home network, connected devices, digital audio players,

and continue to enjoy your collection of discs. Convenient

Bluetooth wireless audio with high-quality aptX offers an instant

wireless music connection (check with the manufacturer of

your mobile device to determine if it supports the aptX feature).

The № 519 Audio Player plays virtually all high-resolution audio

formats: enjoy up to 32-bit, 192kHz PCM, up to double-speed

DSD, FLAC, ALAC, and more.

Proprietary Mark Levinson Signal Path

The № 519 Audio Player was developed with Mark Levinson’s

proprietary Pure Path discrete, direct coupled, fully balanced,

dual-monaural signal path, delivering pure, uncompromising

sound quality without restriction, limitation, noise, or coloration.

Its Precision Link digital-to-analog converter features nine

individual power supplies plus proprietary jitter elimination

circuitry, and its fully balanced, discrete I/V circuitry forms the

heart of the digital audio processing stage. Six digital audio

inputs on the № 519 are provided including one AES/EBU, two

coaxial and two optical plus a USB audio processor capable of

asynchronous data transfer of high-resolution DSD and PCM.

For low-resolution audio formats, proprietary HARMAN Clari-

Fi® music restoration technology reconstructs information and

bandwidth lost in compression. A complete embedded Linux

computer delivers outstanding performance headroom for

flawless performance, regardless of configuration.

Control and Integration

You can control the № 519 audio player from its front panel,

featuring a full-color, five-inch TFT LCD display flanked by

eight buttons; its metal-housed remote control, apps on your

Apple iOS or Google Android device, any major browser on

your computer, and a host of system integration connections

including RS-232, triggers, and IR input.

Features

• Mark Levinson proprietary discrete, direct coupled, fully

balanced, dual-monaural signal path

• Digital inputs: USB asynchronous (USB type B), two USB mass

storage (USB type A), AES/EBU balanced, two Toslink optical,

two Coaxial unbalanced

• Network and virtual inputs: Ethernet, Wi-Fi (802.11b/g/n/a),

Bluetooth with aptX codec

• Digital outputs: AES/EBU balanced, Toslink optical, Coaxial

unbalanced

• Analog outputs: XLR balanced pair, RCA unbalanced pair, 1/4-

inch (6.3mm) headphone

• Supports high-resolution formats including 32-bit, 192kHz

PCM and double-speed DSD (DSD128)

• Supported 2-channel formats: PCM (24/192), DSD64, DSD128,

FLAC, ALAC, WAV, MP3, AAC, WMA, OGG, AIFF; Redbook and

data CDs

• Streaming music services natively supported: Spotify Connect,

TIDAL, Qobuz, Deezer, internet radio and podcasts (availability

may vary by region)

• Mark Levinson Precision Link DAC featuring the renowned

ESS Sabre 32-bit processor

• Front-panel display: 5-inch full-color TFT LCD

• Fixed or variable output with integrated digital volume control

capability

• Mark Levinson Main Drive circuit for headphone playback:

front-panel jack with integrated Class A amplifier

• Remote control included, iOS and Android apps, supports all

major web browsers

• Designed and handcrafted in the USA

SPECIAL DESIGN FEATURES

3

N

O

519 AUDIO PLAYER / OWNER’S MANUAL

ENGLISH

INSTALLATION CONSIDERATIONS

UNPACKING

When unpacking your player:

• Save all packing materials in case you need to ship your

player in the future.

• Inspect your player for signs of damage during shipment. If

you discover damage, contact your authorized Mark Levinson

dealer for assistance in making appropriate claims.

• Please register your audio player within 15 days of purchase

at marklevinson.com.

• Retain your original, dated sales receipt as proof of warranty

coverage.

• Remove the accessory box from the shipping carton. Make

sure that all of the items listed below are included. If any are

missing, contact your authorized Mark Levinson dealer.

o IEC power cord (terminated according to the region to

which the unit is shipped)

o WiFi Antenna

o Remote control with preinstalled batteries

o Phillips screwdriver (for replacing remote batteries)

o Pair of white gloves (for use during unpacking and

initial setup)

o Documentation

PLACEMENT AND VENTILATION

• Install the player on a shelf in an open rack, to ensure proper

ventilation.

• Ensure that you install the player on a solid, flat and level

surface.

• Install the player as close as possible to associated audio

components to keep interconnecting cables as short as

possible.

• Select a dry, well-ventilated location that is out of direct

sunlight.

• DO NOT expose the player to high temperatures, humidity,

steam, smoke, dampness, or excessive dust.

POWER REQUIREMENTS

The player is configured at the factory for 100, 115, or 230 VAC

power operation at 50Hz or 60Hz. Before operating, ensure that

the power label on the rear panel near the AC input connector

indicates the correct operating voltage. A detachable IEC power

cable intended for use in the region where the unit is sold is

included.

Connection to an AC voltage other than that for which the

unit is intended can create a safety and fire hazard and may

damage the unit. If you have any questions about the voltage

requirements for your preamplifier or about the line voltage in

your area, contact your authorized Mark Levinson dealer before

plugging the unit into an AC power outlet.

WARNING! MAKE SURE all components in the audio

system are properly grounded. Do NOT defeat the

safety purpose of polarized or grounding-type

plugs with “ground-lifter” or “cheater” adapters.

Doing so may cause dangerous voltage to build

up between components, which may result in

personal injuries and/or product damage.

You should unplug the audio player from the AC wall outlet during

lightning storms and extended periods of non-use.

CAUTION: BEFORE moving the unit, make sure it is powered off

by removing the power cord from the AC power outlet and the

unit’s rear panel.

ORIGINAL ANTENNA

The unit’s Wi-Fi antenna cannot be replaced with an alternate.

Use of any other antenna is not covered by warranty, may result

in degraded performance, and may violate regulations in your

country. If you damage or misplace the antenna, replace it with

Mark Levinson/HARMAN part number 480-18521.

A NOTE ABOUT WIFI AND BLUETOOTH

CONNECTIVITY

Installation factors can affect the range and performance of

the WiFi and Bluetooth radios. Make certain that the unit is

not blocked by metal cabinets or shelving and that it is within

the recommended range of the wireless router to which it is

connected. While it is not necessary for normal operation,

maximum range of up to 50ft (15m) for Bluetooth connections

can be achieved with line-of-sight connections to the BT receiver

antenna located on behind the front panel display window.

INSTALLATION CONSIDERATIONS

4

N

0

519 AUDIO PLAYER / OWNER’S MANUAL

INSTALLATION CONSIDERATIONS

OPERATING STATES

The player has three operating states:

• Off: The AC mains power is disconnected by using the rear-

panel Power switch or by removing the power cord from

the rear panel.

• Standby: The Standby mode has three settings that can

be selected via the menu system: Green, Power Save, and

Normal.

o Green: This mode removes power from almost all of

the circuits, allowing the unit to be activated only via

an IR control signal, a 5V – 12V trigger or a press of

the Standby button. This mode provides maximum

power conservation and is the factory-default

Standby mode.

o Power Save: This mode removes power from the

audio circuits, but keeps the control and streaming

circuitry powered and ready to receive commands.

This mode provides moderate power conservation.

o Normal: This mode shuts off the display and mutes its

audio outputs, but keeps all of its control, streaming,

and audio circuits powered. This mode provides the

least amount of power conservation but allows the

audio circuits to remain warmed up to deliver optimal

performance at all times.

• On: The entire unit is powered up and all configured outputs

are active.

The player has an Auto Off feature that automatically places it

into the Standby mode after 20 minutes of no user control input

or audio signal passing through the unit. The factory-default

setting for the Auto Off feature is on (engaged). You can disable

the Auto Off feature in the menu.

UPDATES

Having the most up to date software on your № 519 is important

for the best reliability and function.

Once connected to the internet (See

Quick Setup and Listen

> Wi-Fi Setup

for steps on how to connect), your unit will

automatically search for new updates. If new updates are found,

the № 519 will notify you via a gear icon present at the top of the

screen. To install these updates, navigate to

Settings

>

System

>

Update Firmware

>

Check for update online.

5

N

O

519 AUDIO PLAYER / OWNER’S MANUAL

ENGLISH

GETTING STARTED

FRONTPANEL OVERVIEW

GETTING STARTED

Front-panel controls/indicators

Input knob:

Rotate this knob to select the desired input to send

to the outputs. (Note: the Input knob will bypass any input for

which the Input has been disabled in the

Settings

>

Input Setup

menu.)

IR receiver:

the IR receiver receives commands from the

included remote control when the unit is not being controlled

via its rear-panel IR Input connector (see Rear-Panel Overview

for more information). Infrared communication requires line-

of-sight between the remote and this “target” on the unit’s front

panel.

Bluetooth receiver:

the Bluetooth receiver receives the

Bluetooth stream from the connected device (phone, tablet, or

computer). Bluetooth communication does not require line-of-

sight between the device and this receiver on the unit’s front

panel, but for best range of distance between the two, line-of-

sight is encouraged.

Headphone output connector:

this ¼-inch (6.3mm) TRS phone

plug connector provides a line-level stereo signal that can drive

headphones up to 32 ohms in Class A. When the unit detects

that headphones have been connected, the Balanced and

Single-Ended outputs are automatically muted, and the Volume

knob switches to control of the Headphone output level. When

the unit detects the headphones have been disconnected, the

Balanced and Single-Ended outputs are automatically unmuted,

and the Volume knob returns to control of their level.

play/pause

select

settings

back

stop/ejectmute

volumeinput

standby

AUDIO PLAYER N

o

519

headphones

Settings

button

Mute

button

Back

button

Input

knob

Headphone

output

connector

Disc Slot

Select

button

Stop/eject

button

Standby

button

Standby

LED

Play/pause

button

Bluetooth

receiver

IR receiver

Volume/value

knob

6

N

0

519 AUDIO PLAYER / OWNER’S MANUAL

GETTING STARTED

The balanced and single-ended outputs can be configured in the

menu as Fixed (for use with recording components or a second

audio zone). When configured as Fixed, the Line outputs are not

affected by volume controls.

Select button:

press this button to select an item in a list, or

confirm (“OK”) a menu-item change within the menu system.

Settings button:

press this button to enter the menu system,

which you can use to customize the player to suit your other

system components, individual preferences and listening space.

Back button:

press this button to move back or “up” one level

in the menu system. The Back button does not function during

normal operation. The Back button is also used to move the

cursor left when manually entering text in settings.

Mute button:

press this button to mute and unmute the level of

the outputs by the amount determined in the menu.

Play/pause button:

press this button to engage playback from

stopped or paused state on the current source, or to pause

playback if currently playing. The Play/pause button does not

function when the Balanced, Optical, or Coaxial inputs are

selected.

Next button:

press this button to select the next track in the

current source or playlist. The Next button does not control

playback when the Balanced, Optical, or Coaxial inputs are

selected. The Next button is also used to move the cursor right

when manually entering text in settings.

Previous button:

press this button to return to the start of the

current track, or if at the start of the current track, to select the

previous track in the current source or playlist. The Previous

button does not control playback when the Balanced, Optical, or

Coaxial inputs are selected.

Stop/eject button:

press this button to stop playback from

playing or paused state on the current source, or to eject a disc

if the Disc input is currently selected and stopped. The Stop/

eject button does not function when the Balanced, Optical, or

Coaxial inputs are selected, and the Eject functions only when

Disc is selected and a disc is inserted.

Volume/value knob:

turn this knob to adjust the volume level

of the outputs or scroll through items in a list of values when

within the Settings menu. The minimum volume level is OFF;

the maximum volume level is determined in the menu system.

Whenever you select an input, the unit applies the volume offset

selected for it in the Setup menu to the output volume level.

Standby button:

press this button to put the unit into and out of

the selected Standby mode. The LED illuminates when the unit

is On. When the unit is in Standby mode, it flashes slowly.

7

N

O

519 AUDIO PLAYER / OWNER’S MANUAL

ENGLISH

GETTING STARTED

REARPANEL OVERVIEW

digital inputs

~ ac mains

70W

1

2 3 4 5 6

ethernet

IR

input

RS-232

outin

trigger

digital outputs

Harman International Indust ries, Inc.

reset

wps

antenna

analog outputs

RIGHT

LEFT

Designed and assembled in U.S.A.

AUDIO PLAYER N

o

519

S/N

Power

Switch

AC Mains

Connector

USB Digital

Audio Input

Connector

Antenna

Connector

Left Channel

Balanced output

connector

Right Channel

Balanced output

connector

Fuse Compartment

(see rear-panel

labeling for value)

Balanced

AES/EBU

Digital Input

Connector

Ethernet Connector

Coaxial

Digital Input

Connectors

Optical

Digital Input

Connectors

Optical

Digital Output

Connector

Coaxial

Digital Output

Connector

Balanced AES/EBU

Digital Output

Connector

IR Input

Connector

WPS button

Reset button

RS-232 Connector

Trigger Input

Connector

Trigger Output

Connector

Left Channel

Single-ended

output connector

Right Channel

Single-ended

output connector

USB

connector

8

N

0

519 AUDIO PLAYER / OWNER’S MANUAL

GETTING STARTED

Output Connectors

Balanced output connectors:

these XLR 3-pin connectors

provide a line-level left-channel and right-channel signal that

can be used to send the selected input to preamplifier inputs,

power amplifier inputs, a powered subwoofer, or to recording

components. Mark Levinson recommends using the Balanced

outputs as the primary output if your preamplifier or amplifiers

offer balanced inputs.

Single-ended output connectors:

these RCA connectors provide

a line-level left-channel and right-channel signal that can be

used to send the selected input to preamplifier or amplifier

inputs, a powered subwoofer, to a second listening zone, or to

recording components.

The Balanced and Single-ended outputs can be configured in the

menu as Fixed (for use with a separate preamplifier, recording

components or a second audio zone). When configured as Fixed,

these outputs are not affected by the Volume knob or Mute button.

Balanced

Input Connector

(female XLR)

3

1

2

Balanced

Output Connector

(male XLR)

Digital output connectors:

the № 519 has three digital output

connectors: AES/EBU Balanced XLR, Coaxial S/PDIF RCA,

and Optical S/PDIF TOSLINK. Each digital output provides a

two-channel digital connection to your DAC or preamplifier

with built-in DAC. Mark Levinson recommends using the

Balanced digital output for the best possible sound quality if the

connection is available on the DAC or preamplifier to which the

player is connected.

Input Connectors

Digital audio input connectors:

the № 519 has six digital input

connectors:

• One AES/EBU Balanced XLR, numbered 1

• Two Coaxial S/PDIF RCA, numbered 2 and 3

• Two Optical S/PDIF TOSLINK, numbered 4 and 5

• One Asynchronous USB Type B, numbered 6

Mass storage connectors:

Two Mass Storage USB Type A

• These connectors can be used for attaching USB drives

containing music, unit software updates, or setup

configuration importing and exporting.

Please note that the

USB Type A connections are not for direct connection to an

audio source device.

Note: when importing settings or software updates from

a USB flash drive, please remove any other USB drives

attached to the unit first, then insert the one with the new

settings or software.

Note: Mark Levinson recommends using high-quality, name

brand USB drives for the best reliability and performance.

Use of low-quality drives may degrade performance or not

be reliable.

Control Connectors

Ethernet connector:

This connector accepts a Cat5 or higher

cable for connection to an Ethernet network. For information on

how to configure and use the Ethernet port, see the online user

guide.

IR input connector:

this 1/8-inch (3.5mm) connector accepts IR

(infrared) control signals from other equipment. Note that this

connector does not provide power for IR extender modules.

RS-232 connector:

this RJ-11 connector provides serial control

through a standard RS-232 connection.

Trigger output connectors:

these 1/8-inch (3.5mm) TS phone

plug connectors can be used to activate other components in

the audio system and listening room, such as amplifiers, lights,

and window shades. A 12V 100mA DC signal is output whenever

the unit is on. (See illustration)

Trigger phone plug connector pin assignments:

• Tip: +

• Sleeve: –

Trigger input connector:

this 1/8-inch (3.5mm) TS phone plug

connector can be connected to the trigger output of another

system component or control system that supplies a trigger

voltage. Whenever the unit detects a voltage between 5V and

12V DC at this connection, it will turn On from Standby. When

the trigger signal at this connection ceases, the unit will enter

the selected Standby mode. (See illustration)

9

N

O

519 AUDIO PLAYER / OWNER’S MANUAL

ENGLISH

GETTING STARTED

AC Mains connector:

This connector provides AC power to the

unit when the supplied power cord is connected from it to an

AC electrical outlet. Unplug the preamplifier from the AC wall

outlet during lightning storms and extended periods of non-use.

Power switch:

this mechanical switch turns the unit’s power

supply on or off. During normal operation, do not use the Power

switch to power off the unit; instead, use the Standby button.

REMOTE CONTROL OVERVIEW

Standby button:

press this button to put the unit into and out of

the selected Standby mode.

Input buttons:

press these buttons to select the desired input.

The name and volume level of the selected input are indicated

on the front-panel display.

Volume buttons:

press these buttons to adjust the volume level

of the Balanced and Single-Ended outputs if you have set them

to Variable in the menu, or the Headphone output if you have

connected headphones. The Mute and Maximum volume levels

can be set in the Settings Menu, under

Volume & Balance

.

Whenever you select an input, the unit applies the volume offset

selected for it in the menu to the Main output volume level (and

to the Line output volume level if you have set it to Variable in

the menu).

Up/down buttons:

press these buttons to select the next highest

or lowest item when within the menu structure. The up/down

buttons do not function during normal operation.

Settings button:

press this button to display the menu, which

you can use to customize the player to suit your individual

preferences, listening space and other system components.

Mute button:

press this button to mute and unmute the

Balanced and Single-ended outputs if you have set them to

Variable in the menu, or to mute and unmute the Headphone

output if you have connected headphones The mute level can

be configured in the menu.

Select button:

press this button to confirm or “OK” a setting

change when the menu is displayed.

Back button:

press this button to move back or “up” one level

in the menu system. The Back button does not function during

normal operation.

Play/pause button:

press this button to engage playback from

stopped or paused state on the current source, or to pause

playback if currently playing. The Play/pause button does not

function when used with the Balanced, Optical, or Coaxial

inputs.

Next button:

press this button to select the next track in the

current source or playlist. The Next button does not control

playback when used with the Balanced, Optical, or Coaxial

inputs.

Previous button:

press this button to return to start of the

current track, or if at the start of the current track, to select the

previous track in the current source or playlist. The Previous

button does not control playback when the Balanced, Optical, or

Coaxial inputs are selected.

Stop/eject button:

press this button to stop playback from

playing or paused state on the current source, or to eject a disc

if Disc is currently selected and stopped. The Stop/eject button

does not function when the Balanced, Optical, or Coaxial inputs

are selected, and the Eject functions only when Disc is selected

and a disc is inserted.

Clari-Fi button:

pressing this button activates or deactivates

HARMAN Clari-Fi® music restoration technology circuitry.

Display button:

press this button to change the intensity of the

front-panel display. Multiple presses of the Display button cycle

through the available brightness levels: High, Medium, Low. If

the display is Off and the unit is On, press the Display button to

turn the display on.

mute

input volume

display

standby

Clari-Fi®

AUDIO PLAYER N

o

519

back

select

settings

Standby

button

Volume

buttons

Up/down

buttons

Settings

button

Mute

button

Play/pause

button

Input

buttons

Clari-Fi

button

Display

button

Stop/eject

button

Select

button

Back

button

10

N

0

519 AUDIO PLAYER / OWNER’S MANUAL

QUICK SETUP AND LISTEN

REMOTE CONTROL

Your remote control comes with two preinstalled AAA alkaline

batteries. To replace the batteries, remove the remote control’s

battery cover using the included screwdriver, insert the batteries

and replace the battery cover. Be sure to observe proper battery

polarity.

When using the remote control, aim it toward the front-panel IR

receiver. Make sure that no objects, such as furniture, block the

remote’s view of the receiver. Bright lights, fluorescent lights,

and plasma video displays may interfere with the function of the

remote.

• The remote has a range of about 17 feet (5m), depending on

the lighting conditions

• You can use the remote at an angle of up to 45°

• Placing the unit behind tinted glass will reduce the remote

control’s effective range

INITIAL CONNECTIONS

CAUTION: Before making connections, make sure the unit and

all associated components are powered off and disconnected

from electrical outlets.

1. Connect your amplifiers’ or preamplifier’s inputs to the

player’s output connectors. Mark Levinson recommends

using the Balanced output connectors if your amplifier(s) or

preamplifier have balanced input connectors. Otherwise, use

the Single-ended output connectors.

2. Connect digital source components’ outputs to the player’s

digital audio inputs and USB drive(s) to the rear-panel inputs.

If you are connecting a computer via USB, download and

install the USB Audio driver software from the product web

page at marklevinson.com, under the Downloads tab.

3. Connect the supplied Wi-Fi antenna to the unit’s rear panel.

4. If possible, connect the unit to your network via router or

other network connection using a Cat5 or higher cable. If

connected via Wired network, the antenna is optional.

Mark Levinson recommends using a wired network

connection for the best performance and stability. If you

do not have access to a wired network connection where

your unit is located, follow the Wi-Fi Setup steps below. The

unit will connect via wired OR wireless network method, so

if you have access to a wired network connection, there is

no need to follow the Wi-Fi Setup steps.

5. Connect the supplied power cable to the player’s AC Mains

connector and into an electrical outlet. Turn the rear-panel

Power switch on the unit to On, and turn on all associated

components.

6. When the system has completed starting up, and the display

is dark with Standby indicator slowly flashing, press the front-

panel Standby button or the Standby button on the remote

control.

7. Make sure the player’s or preamplifier’s volume is set to a

reasonable level. It is best to start low and turn up to avoid

unintentionally damaging your equipment.

8. Turn the Input knob or press the Input buttons on the remote

to select the input that corresponds to an input to which you

connected a source component, or insert a CD.

9. Download the Mark Levinson Audio Player app, available

from the Apple iOS App Store or Android Google Play.

Optional: if you would like to control your № 519 from your

computer type the player’s IP address into your web browser.

This is the number that appears in gray on the opening screen.

You can also find the player’s IP address from the Settings

Menu under Network.

A NOTE ABOUT DSD FILES

The № 519 will play back both DSD64 and DSD128 encoded files.

When playing music encoded in these formats, audio will only

be present at the analog (and headphone) outputs. Because of

the nature of DSD-encoded data, it cannot be transmitted via

standard digital interconnections like Toslink or coaxial.

If you are using your № 519 as a digital source connected to a

preamplifier’s DAC, you will need to also connect the № 519s

analog outputs to an input on the preamplifier to listen to your

DSD-encoded data.

QUICK SETUP AND LISTEN

11

N

O

519 AUDIO PLAYER / OWNER’S MANUAL

ENGLISH

QUICK SETUP AND LISTEN

N

O

519 System Configuration Examples

N

O

519 connected to a preamp using the analog outputs

digital inputs

~ ac mains

70W

1

2 3 45 6

ethernet

IR

input

RS-232

outin

trigger

digital outputs

Harman International Industries, Inc.

reset

wps

antenna

analog outputs

RIGHT

LEFT

Designed and assembled in U.S.A.

AUDIO PLAYER N

o

519

S/N



~ ac mains

Harman International Industries, Inc.

120W

IR

RS-232

out

in

trigger

out

analog audio inputs

12

345

main outputs

analog audio inputs

12

345

main outputs

phono inputs

groundrightleft

Designed and assembled in U.S.A.

PREAMPLIFIER N

O

523

S/N

+

-

Class 2 wiring

outputs

+

-

Class 2 wiring

outputs

N

o

523

N

o

534

DIGITAL SOURCE

COMPONENT

COMPUTER

TO USB

PORT

TO DIGITAL

OUTPUT

LEFT

SPEAKER

RIGHT

SPEAKER

12

N

0

519 AUDIO PLAYER / OWNER’S MANUAL

QUICK SETUP & LISTEN

digital inputs

~ ac mains

70W

1

2 3 45 6

ethernet

IR

input

RS-232

outin

trigger

digital outputs

Harman International Industries, Inc.

reset

wps

antenna

analog outputs

RIGHT

LEFT

Designed and assembled in U.S.A.

AUDIO PLAYER N

o

519

S/N



~ ac mains

Harman International Industries, Inc.

2345 6

1

120W

IR

RS-232

out

in

trigger

out

digital audio inputs

analog audio inputs

12

345

main outputs

analog audio inputs

1 2

345

main outputs

phono inputs

groundright left

Designed and assembled in U.S.A.

PREAMPLIFIER N

O

526

S/N

+

-

Class 2 wiring

outputs

+

-

Class 2 wiring

outputs

N

o

526

N

o

534

DIGITAL SOURCE

COMPONENT

COMPUTER

TO USB

PORT

TO DIGITAL

OUTPUT

LEFT

SPEAKER

RIGHT

SPEAKER

N

O

519 connected to a preamp using the digital outputs

13

N

O

519 AUDIO PLAYER / OWNER’S MANUAL

ENGLISH

QUICK SETUP & LISTEN

digital inputs

~ ac mains

70W

1

2 3 45

ethernet

IR

input

RS-232

outin

trigger

digital outputs

Harman International Industries, Inc.

reset

wps

antenna

analog outputs

RIGHT

LEFT

Designed and assembled in U.S.A.

AUDIO PLAYER N

o

519

S/N

+

-

Class 2 wiring

outputs

+

-

Class 2 wiring

outputs

6

N

o

534

DIGITAL SOURCE

COMPONENT

COMPUTER

TO USB

PORT

TO DIGITAL

OUTPUT

LEFT

SPEAKER

RIGHT

SPEAKER

N

O

519 connected directly to a power amplifier

14

N

0

519 AUDIO PLAYER / OWNER’S MANUAL

QUICK SETUP AND LISTEN

WIFI SETUP

Mark Levinson recommends using a wired network for the best

performance. However, if you do not have access to a wired network

connection where your unit is located, follow these Wi-Fi Setup

steps. The unit will connect via wired OR wireless network method,

so if using a Wired network connection, there is no need to follow

the Wi-Fi Setup steps.

WPS METHOD

Your № 519 comes with WPS (Wi-Fi Protected Setup)

functionality via a WPS button on the back panel. This allows

the unit to easily connect to any WPS enabled router. Simply

press the WPS button on the router, and then press the WPS

button on the rear of the unit, or the

Start WPS

option under

Network

>

Configure

>

Wireless.

WPS automatically sends the

network password and the device remembers it for future use.

The № 519 will be able to connect to the same network in the

future without you having to use the WPS button again.

SoftAP METHOD

If your router does not have WPS, or you cannot access it,

follow these steps to connect:

1. After following the steps in the Initial Connections

section, locate the Wi-Fi network settings on your iOS

or Android device and connect to the “M.L. № 519 …”

network.

2. This connection is broadcasted from the № 519 itself, and

allows full control over the unit using the ML Control app.

3. Open the Mark Levinson Control app on your iOS or

Android device, tap the № 519 and then tap

Settings

>

Network

>

Configure

>

Wireless

>

Scan available

networks.

4. Tap the name of the Wi-Fi network > Key > enter your

network password > tap OK.

5. Tap Connect, and your № 519 will connect to the network.

6. On your iOS or Android device, navigate to its Wi-Fi

network settings and connect to the same network. You

can now control your № 519 from your device.

If you do not have an iOS or Android device, temporarily relocate

and connect the № 519 to your wired network.

1. Ensure that your № 519 and computer are both connected

to the same network.

2. From the № 519’s front panel, go to

Settings

>

Network

> scroll down to

IP Address

. Type the player’s IP address

from its front panel display into your computer’s web

browser, and press return.

3. From the interface that appears in your browser,

navigate to

Settings

>

Network

>

Configure

>

Wireless

>

Scan available networks

.

4. Click the name of the Wi-Fi network > Key > enter your

network password > click OK.

5. Click Connect, and your № 519 will connect to the Wi-Fi

network.

6. You can now unplug and relocate your player to its

permanent location. It will retain the network setting

changes you have made while unplugged. Return to the

Initial Connections directions above, starting from item 4.

BLUETOOTH SETUP

Your № 519 comes featuring Bluetooth connectivity. Bluetooth

allows you to stream media from Bluetooth devices wirelessly.

1. Enable Bluetooth on your Bluetooth Phone, tablet, computer

or other device.

2. Make sure your № 519 is powered and out of standby.

3. If you know the name of your № 519 you can select from

the list of available devices in your Bluetooth Phone, tablet,

computer or other device.

4. Upon successful pairing, the № 519 will switch to the

Bluetooth Input and display a new screen with the current

media if it is playing.

Otherwise:

1. Navigate to the Bluetooth input with the input knob and

verify the proper name for the unit.

2. Select the option

Connect to

№ 519 and search for available

devices on your Bluetooth Phone, tablet, computer or other

device.

3. Select the № 519 on your Bluetooth Phone, tablet, computer

or other device and pair.

4. Upon successful pairing, the № 519 will display a new screen

with the current song.

To reconnect in the future, you can reconnect using your Bluetooth

Phone, tablet, computer or other device, or by selecting

Reconnect

to previously paired device

on the № 519. Unpairing the devices may

be done in the Bluetooth Phone, tablet, computer or other device,

under Bluetooth settings.

When you change to a different input on your № 519, your Bluetooth

Phone, tablet, computer or other device will stay connected but will

be paused.

If you put the № 519 in Standby any connected Bluetooth device will

be disconnected. (Green standby only)

15

N

O

519 AUDIO PLAYER / OWNER’S MANUAL

ENGLISH

QUICK SETUP AND LISTEN

USING SPOTIFY CONNECT

A better way to listen at home

Spotify Connect lets you play Spotify through your home

speakers or TV, using the Spotify app as remote. You’ll need a

Spotify Premium account to use Spotify Connect. If you don’t

have it, just go to http://www.spotify.com/freetrial for your free

30-day trial.

1. Connect your № 519 to the same Wi-Fi network as your

phone, tablet, or computer running the Spotify app.

2. Open the Spotify app, and play any song.

3. Tap the song image in the bottom left of the screen.

4. Tap the Connect icon.

5. Pick your № 519 from the list.

For more information on how to set up and use Spotify Connect

please visit www.spotify.com/connect.

USING TIDAL, DEEZER, AND QOBUZ

The № 519 also integrates music streaming services TIDAL,

Deezer, and Qobuz. (subscription required)

It is best to enter your credentials using the Web Page or App.

If these are not available use the front panel method described

below.

1. To connect to any of these, navigate to their respective

inputs, and you will be prompted for a username and

password.

2. Select your username and enter your credentials using

the volume knob, and the Next/Previous buttons.

3. Once done, use the select button to return to the menu,

and do the same for your password.

4. Log in.

Once logged in, you will have full access of each streaming

service, right from the № 519.

16

N

0

519 AUDIO PLAYER / OWNER’S MANUAL

SETTINGS MENU

SETUP MENU NAVIGATION

Pressing the Settings button displays the Settings menu on the

№ 519’s front-panel display. When the Settings menu is active…

• use the Volume/Value knob to scroll through options,

• use the Select button to select and deselect options,

• use the Volume/Value knob to adjust parameters,

• to move back a level in the menu structure, press the

Back button repeatedly until the desired menu is shown

in the display,

• to exit the Settings menu, press the Settings button.

• Use Previous and Next to move horizontally when entering

letters and numbers.

SETTINGS

•

Volume & Balance:

This menu allows you to adjust the

volume and balance of the output channels

o

Balance

: use this setting to pan the output to the

left or right channel.

o

Max Volume Level

: adjust this setting to limit the

maximum volume output from the № 519.

o

Mute Volume Level

: adjust this setting to change

the volume level the № 519 goes to when muted.

o

Turn-On Volume Level

: when turning on, the № 519

will be set to this volume level.

o

Phones Turn-On Vol

: when turning on, the № 519

headphone output will be set to this volume.

o

Last Volume as Turn-On Volume Level

: When this

option is checked, the № 519 will save the output

and headphone volume levels when the unit is

put into standby, maintaining them when the unit

is powered up next time. Note that the Turn-On

Volume Level and Phones Turn-On Vol settings are

disabled when this option is enabled.

o

Output Volume

: this setting toggles the Balanced

and Single-Ended outputs between Variable and

Line (fixed level) modes.



Variable

: use this setting when you have

connected the Balanced or Single-ended

outputs to an external preamplifier, amplifier,

or powered loudspeakers. The output level

will vary with the level of the volume control.



Line (Fixed)

: use this setting when you have

connected the Balanced or Single-ended

outputs to a recording device. The outputs

will remain at a fixed level regardless of the

volume control level.

 Note: the Headphone output is always

Variable.

•

Operation:

This menu controls the operation of the № 519

o

Power Management



Standby:

this setting lets you set the Standby

mode to one of the following options: Green,

Power Save, and Normal.

• Green: This mode removes power from

almost all of the circuits, allowing the №

519 to be activated only via an IR control

signal, a 5V – 12V trigger or a press of

the Standby button. This mode provides

maximum power conservation and is

the factory-default Standby mode.

• Power Save: This mode removes power

from the audio circuits, but keeps the

control and streaming circuitry powered

and ready to receive commands from

either the front panel controls or the

remote control. This mode provides

moderate power conservation.

• Normal: This mode shuts off the display

and mutes its audio outputs, but keeps

all of its control, streaming, and audio

circuits powered. This mode provides

the least amount of power conservation

but allows the audio circuits to

remain warmed up to deliver optimal

performance at all times.



Auto Off:

this setting lets you engage or

disengage the Auto Off function, which puts

your № 519 into the Standby mode after 20

minutes of inactivity (no audio signal, and no

control input).

o

Remote Control



Trigger:

(Normal/Pulsed) This setting

configures how the 12V trigger relay data

is sent and received. Most components

require this to be set at “Normal,” but some

products (such as some older Mark Levinson

components) require that it be set to Pulsed.



Front IR:

this toggle allows you to turn the №

519’s front IR receiver on or off. If you have

connected the № 519’s rear-panel IR input to

an IR control device, set the Front IR receiver

to Off to avoid interference.

17

N

O

519 AUDIO PLAYER / OWNER’S MANUAL

ENGLISH

SETTINGS MENU

o

Display

: this menu gives you access to the following

display parameters:



Display Intensity:

lets you set the brightness

of your display to High, Medium, or Low. The

factory default setting is High.



Display Timeout:

lets you choose how long

the display remains lit after the last time a

control is operated. Choose from 5 seconds,

10 seconds, 20 seconds, 30 seconds, or

disable it.

•

Input Setup:

The Input Setup menu allows you to customize

the following parameters for the selected input.

o

Enabled:

use this setting to enable or disable the

input from displaying in the Input menu (when

turning the Input knob)

o

Name:

use this setting to rename an input to a

custom name of your preference. Note that the

Bluetooth, Network, and streaming services

cannot be renamed.

o

Offset:

the output level of audio devices can vary

between brands and models, making some devices

sound louder or quieter than others. The Offset

adjustment allows you to precisely compensate

for that variance, allowing all associated devices

in your system to output at a similar volume level.

The setting offers a range of –10dB to +10dB, in

0.5dB steps. Whenever an input is selected, the №

519 applies the setting of the Offset parameter to

the volume level of the outputs.

o

DAC Filter (PCM):

this setting lets you set the filter

characteristic:



Sharp:

this filter has a steep roll-off

characteristic that may be better suited when

listening to electric or electronic music



Slow:

this filter has a gradual roll-off

characteristic that is well suited to most

types of music



MinPhas:

this is a minimum-phase filter

that may be better suited when listening to

acoustic music

 Although the above descriptions are offered

as a guide, feel free to set the DAC filter

according to your own tastes

o

Clari-Fi:

setting this option to ON activates

HARMAN Clari-Fi® music restoration technology

circuitry for the selected input. Clari-Fi analyzes

compressed digital audio files during playback

and reconstructs what was lost in the compression

process.



Clari-Fi Intensity:

The Intensity control

adjusts the amount of reconstruction applied

to the signal, and can be applied according to

your individual taste – there is no “correct”

amount.

o

DSD Filter (USB and Network inputs only):

The

DSD Filter is a low-pass filter that can be set to

47kHz, 50kHz, 60kHz, or 70kHz to reduce unwanted

ultrasonic noise. There is no “correct” setting for

the DSD filter: it can be set according to personal

preference or to suit the type of music to which you

are listening.

o

Play CD upon insertion (CD input only):

when

enabled, a CD will automatically begin playback

when inserted.

•

Network:

this menu offers access to the following

network-related parameters

o

Wi-Fi/Wired:

this setting displays the current

network mode for the № 519: Wireless, Wi-Fi, or

SoftAP.



SoftAP:

this mode enables convenient

first-time setup by broadcasting a network

from the № 519. To use SoftAP, follows the

instructions in QUICK SETUP AND LISTEN >

Wi-Fi Setup. The Wi-Fi icon at the top of the

screen will appear with an exclamation point

when in SoftAP mode.

o

Unit Name:

displays a customizable unit name that

will appear when people interact with the № 519.

o

IP:

shows the IP address currently assigned (by

DHCP or manually) to your № 519.

o

SSID:

displays the network name that the № 519 is

either connected to or broadcasting, depending on

the mode.

o

Connection Details:

use this setting to view current

network configurations.



DHCP:

lets you toggle DHCP mode (network

auto-configuration) on or off. The factory

default setting is On. When the mode is set

to Off, you can specify a static IP and Subnet

address for your № 519. NOTE: the setting

under

Connection Details

is read-only.

Access

Configure

>

Wired/Wireless

to toggle

DHCP on and off.

18

N

0

519 AUDIO PLAYER / OWNER’S MANUAL

SETTINGS MENU



Encryption:

shows the encryption method of

the current network.



Subnet Mask:

shows the subnet address

currently assigned (by DHCP or manually) to

your № 519.



Default Gateway:

shows the gateway address

currently assigned (by DHCP or manually) to

your № 519.



DNS:

displays Domain Name System

information about the connection.

o

Configure:

use this setting to connect to wired or

wireless networks.



Connecting to a Wireless network:

• Ensure that

Connection Type

is set to

Automatic or Wireless Only (and not

Wired Only).

• To connect via network name (SSID),

either click

Scan available networks

or

input the network name manually. If

input manually, set the

Encryption

type

as well (None/WEP/WPA-PSK). Enter

the network key (password) if applicable,

scroll down and click

Connect

.

• To connect via WPS, first press the

WPS button on your router, and then

the WPS button on the rear of the №

519. Alternatively, you can also use

the

Start WPS

setting instead of the

physical button, found under

Configure

>

Wireless.



Setting up a Wired network:

• Ensure that

Connection Type

is set

to Automatic or Wired Only (and not

Wireless Only).

• Connect a network cable.

• If Wired connection does not

automatically

connect, navigate to

Connect under Configure

>

Wired.

• If needed, you may disable DHCP and

set a static IP under

Configure

>

Wired.



Setting up SoftAP:

•

To activate SoftAP, navigate to Configure

>

Wireless

>

Start SoftAP.

• If you are currently connected to

a Wireless network, you will be

disconnected, as the device will now

broadcast its own network to which

you can connect a mobile device or

computer for setup and control.

•

System:

this folder contains options that affect the №

519’s system as a whole.

o

Software Version:

displays the current software

version installed on the unit.

o

Config:

manage the system settings in this menu.



Export Settings to a file:

export current unit

settings (to a .tar file) onto USB drive.



Import Settings from a file:

import unit

settings from a .tar file on a USB drive.



Lock Settings:

enable this setting to disallow

changing any of the № 519 unit settings. Your

installer may have enabled this feature to

prevent accidental changes to networking or

other critical settings in your № 519. If this

is the case, we recommend you contact your

dealer before changing any of your № 519’s

settings.

o

Update Firmware:

lets you update your № 519’s

firmware, either from a flash drive inserted in the

rear-panel USB Type A port, or from our online

server. You should allow the unit ample time to

perform and finish the update; it will take a few

minutes.

 To update via a flash drive:

• Insert flash drive with desired

“sfupdate” file stored on it.

• Select

USB Update – Update found on

USB stick

.

 To update via network:

• The № 519 will automatically notify you

if there is an update available via a gear

icon at the top of the screen.

• Select

Check for update online.

• If there is a newer version available,

the unit will give you the newer version

number and the option to install.

o

Restore Factory Settings:

restore all settings

to their factory defaults with this setting. All

customized settings will be erased.

ページを読み込んでいます...

Mark Levinson NO519, 519 取扱説明書

その他の書類