Thrustmaster 4060303 ユーザーマニュアル

Europe, Middle East

ENGLISH

FRANÇAIS

DEUTSCH

NEDERLANDS

ITALIANO

ESPAÑOL

PORTUGUÊS

РУССКИЙ

ČESTINA

TÜRKÇE

POLSKI

SVENSKA

SUOMI

SLOVENCINA

MAGYAR

תירבע

ةيبرعلا

North America/

Norteamérica

ENGLISH

FRANÇAIS

ESPAÑOL

Latin America/

América Latina

ENGLISH

ESPAÑOL

PORTUGUÊS

Asia Pacic

日本語

简体中文

繁體中文

ENGLISH

User Manual

Carefully read

the instructions provided in this manual

before installing the product, before

any use of the

product and before any maintenance. Be sure to follow

the safety instructions. Failure to follow these

instructions may result in accidents and/or damage.

Keep this manual so that you can refer to the

instructions in the future.

TABLE OF CONTENTS

1. BOX CONTENTS ................................................ 4

2. INFORMATION REGARDING USE .................. 5

3. MOUNTING SIMTASK STEERING KIT ............ 7

4. INSTALLATION ON A SUPPORT .................... 9

Attaching SimTask Steering Kit to a table,

a desk or a shelf ......................................... 10

5. INSTALLING A T128 RACING WHEEL ON

SIMTASK STEERING KIT ........................................ 12

Adjusting the inclination of the racing

wheel ........................................................... 14

Installing the spinner knob on the rim ..... 16

6. INSTALLING A T248 RACING WHEEL ON

SIMTASK STEERING KIT ........................................ 18

Adjusting the inclination of the racing

wheel ........................................................... 19

Installing the spinner knob on the rim ..... 21

7. FAQ AND TECHNICAL SUPPORT .................. 23

3

Thanks to SimTask Steering Kit adapt your driving

position to any type of vehicle, with the adjustable

system of inclination.

This manual will help you install and use your

SimTask Steering Kit under the best conditions.

Before starting, make sure to carefully read all of

these instructions and warnings: they will help you

get the most enjoyment out of your product.

4

1. Box contents

Two

sets of pads are supplied with the spinner knob:

one set for the T128 racing wheel*, the other set for the

T248 racing wheel*, each

with a specific thickness and

marking (T128 or T248).

5

2. Information regarding use

Documentation

Before using this

product, carefully read this

documentation again, and keep it for future reference.

Securing the gaming area

- Do not place any object in the gaming area which may

disrupt the practice of the user, or which may provoke

an inappropriate movement or an

interruption by

another person (coffee cup, telephone, keys, for

example).

-

Do not cover the power cables with a carpet or rug,

blanket or covering or any other item, and do not place

any cables where people will be walking.

6

Risk of collision

When the racing wheel is powered on (plugged into

a

power outlet

+ USB port), the initialization of the force

feedback causes the racing wheel to rotate, which

may

present a risk of collision when the spinner knob

is

mounted.

7

3. Mounting SimTask Steering Kit

8

- Use only parts and screws supplied with your product.

- Assemble all components as shown in the diagram.

- During assembly, make sure that all parts are securely

fastened.

- Once assembly is complete

, check that all

components are secure and that there is no play.

- Be careful not to overtighten the screws.

9

4. Installation on a support

Before each use, verify that SimTask Steering Kit is still

properly attached to the support (table, desk or shelf

),

as per this manual’s instructions.

10

Attaching SimTask Steering Kit to a

table, a desk or a shelf

The clamping system is suitable for tables,

desks and

shelves whose thickness is between 15 and 50 mm (0.6

and 2”).

- To tighten: turn both knobs counterclockwise.

11

- To loosen: turn both knobs clockwise.

To avoid damaging the clamping system or the support

,

stop screwing when you feel a strong resistance.

12

5. Installing a T128 racing wheel on

SimTask Steering Kit

 Place the T128 racing wheel on the SimTask Steering

Kit shelf and tighten the side screws to hold the racing

wheel in position.

13

 Insert the fastening screw in the clamp, then tighten

the device by turning the screw counterclockwise, so that

it feeds into the threaded hole located beneath the racing

wheel, until the wheel is perfectly stable.

The clamp and the fastening screw are provided with the

T128 racing wheel.

For more information on attaching the racing wheel,

please refer to the T128 user manual.

Xbox One/Xbox Series/PC version:

https://support.thrustmaster.com/product/t128x/

PS4



/PS5



/PC version:

https://support.thrustmaster.com/product/t128-ps/

Never tighten the fastening

screw alone without the

clamp in place. This could damage the racing wheel.

14

Adjusting the inclination of the racing

wheel

SimTask Steering Kit features sliding side rails that let you

adjust precisely the inclination of the racing wheel to suit

the type of vehicle you’re driving.

 Loosen the side screws and slide them up or down to

adjust the inclination of the racing wheel.

 Tighten the side screws when you are satisfied with

the inclination.

15

Position for farm or construction machinery, truck,

bus, with the spinner knob installed

Position for racing

16

Installing the spinner knob on the rim

 Insert a set of pads in the attachment system of the

spinner knob.

Use the set of pads corresponding to your T128

racing

wheel.

17

 Place the attachment system of the spinner knob in

the desired position on the rim.

 Tighten the fastening system.

18

6. Installing a T248 racing wheel on

SimTask Steering Kit

 Place the T248 racing wheel on the SimTask Steering

Kit shelf and tighten the side screws to hold the racing

wheel in position.

 Insert the two screws supplied in the clamping system,

then tighten the device by turning the screws

counterclockwise, so that they feed into the threaded

holes located beneath the racing wheel, until the wheel is

perfectly stable.

19

Adjusting the inclination of the racing

wheel

SimTask Steering Kit features sliding side rails that let you

adjust precisely the inclination of the racing wheel to suit

the type of vehicle you’re driving.

 Loosen the side screws and slide them up or down to

adjust the inclination of the racing wheel.

 Tighten the side screws when you are satisfied with

the inclination.

ページを読み込んでいます...

Thrustmaster 4060303, 4060302 ユーザーマニュアル

関連論文

その他の書類