GameSir C2 ユーザーマニュアル

ブランド: GameSir

モデル: C2

タイプ: ユーザーマニュアル

GameSir • Gaming is Winning.™

Product may vary slightly from those pictures.

User Manual

GameSir C2

Universal Arcade Fightstick

PACKAGE CONTENTS

GameSir C2 Universal Arcade Fightstick

Hex Screw Driver

USB Cable

User Manual

SYSTEM REQUIREMENTS

PS4/PS4 Slim/PS4 Pro

Xbox One/Xbox One S/Xbox One X

Nintendo Switch

Windows 7 or above

Android 4.0 or above

REGISTRATION

warranty status and a series of exclusive benefits from GameSir.

YOUR BENEFITS

* 12-month replacement of the same model from the date you received it.

* Free online technical support at https://gamesir.hk/

DEVICE LAYOUT

Turbo Switch

Control Stick Switch

Home Button

Options Button

Share Button

Key Lock Button

Key Lock Light

L3/R3 Button

Switch ButtonLong Press/ Touchpad ButtonShort Press

Action Buttons

Joystick

USB Port

Cable Outlet

Storage Space

Hex Screw Driver

USB Cable

USING YOUR DEVICE

TURBO SWITCH

Pressing one of the 8 action buttons and setting Turbo switch to ON

simultaneously will enable the Turbo function of this button.

CONTROL STICK SWITCH

Use the Control Stick Switch to shift the joystick’s controller function to

either left analog stick(LS),D-pad(DP),or right analog stick(RS).

LOCK/UNLOCK BUTTON

Setting this button to lock ( ) will disable the HOME,SHARE,OPTIONS,

L3 and R3 buttons.

CONNECTION

a. Take out the built-in USB cable from the storage space at the back of the GameSir C2 arcade

fightstick.

b. Plug the USB end into the USB port of the PS4 console.

c. Press and hold the switch button for 2 secs, the two key lock lights will flash alternately,

indicating hat it has changed to console mode and can be connected to PS4 controller.

d. Plug the micro USB end of the 1m USB cable into the micro USB port of the PS4 controller, then

plug the other USB end into the USB port at the back of the GameSir C2 arcade fightstick. The

two key lock lights will both stay on for 3 secs, indicating that the PS4 controller has been

connected successfully. Then the two key lock lights will return to normal to indicate the key lock

status. Please press the “HOME” button to start to play the game.

e. If the PS4 controller can not be connected successfully, the two key lock lights will both flash

3 times then return to normal to indicate the key lock status. Please remove all the USB cables and

repeat the steps b, c, d.

* Please turn off the PS4 controller before the connection.

* Please keep the PS4 controller connected to the GameSir C2 arcade fightstick while playing.

* Short press of the Touchpad button will trigger the same function as pressing the PS4 controller

touchpad.

Connect to PS4/PS4 Slim/PS4 Pro

Video tutorial

Please press and hold A + X buttons on the GameSir C2 arcade fightstick and plug the USB cable

into the USB port of switch dock simultaneously.

a. Take out the built-in USB cable from the storage space at the back of the GameSir C2 arcade

fightstick.

b. Plug the USB end into the USB port of the Xbox One console.

c. Press and hold the switch button for 2 secs, the two key lock lights will flash alternately,

indicating that it has changed to console mode and can be connected to Xbox One controller.

d. Plug the micro USB end of the 1m USB cable into the micro USB port of the Xbox One controller,

then plug the other USB end into the USB port at the back of the GameSir C2 arcade fightstick.

The two key lock lights will both stay on for 3 secs, indicating that the Xbox One controller has

been connected successfully. Then the two key lock lights will return to normal to indicate the key

lock status. Please start to play the game.

e. If the Xbox One controller can not be connected successfully, the two key lock lights will both

flash 3 times then return to normal to indicate the key lock status. Please remove all the USB

cables and repeat the steps b, c, d.

* Please keep the Xbox One controller connected to the GameSir C2 arcade fightstick while playing.

Connect to Nintendo Switch

Connect to Xbox One/Xbox One S/Xbox One X

Connect to Windows PC / Android

a. Take out the built-in USB cable from the storage space at the back of the GameSir C2 arcade

fightstick.

b. Plug the USB end into the USB port of the Windows PC or Android device.

c. The default mode is Xinput mode, please start to play the game.

d. If you want to switch to Dinput mode, please press and hold the switch button for 2 secs, then

the two key lock lights will flash alternately, indicating that it has changed to Dinput mode. The

two key lock lights will flash 3 times after 30 secs, then return to normal to indicate the key lock

status. You can also press and hold the switch button for 2 secs to switch back to Xinput mode.

Video tutorial

BUTTON REPLACEMENT

a. Take out the hex screw driver from the storage space at the back of the GameSir C2 arcade

fightstick.

b. Unscrew the 7 screws at the bottom of GameSir C2 arcade fightstick and remove the base plate.

c. Disconnect the cable from the button you would like to replace. Press the plastic tabs on each

side of the button to remove the button from the top panel.

d. Install the new button from the top panel and rotate the button until you hear a click sound. The

button is now locked in the top panel.

e. Reconnect the correct color cable to the button according to the following cable assignment label.

Yellow

Orange

Blue Black Purple

Green Red Brown

PANEL WALLPAPER REPLACEMENT

a. Take out the hex screw driver from the storage space at the back of the GameSir C2 arcade

fightstick.

b. Unscrew the 7 screws at the bottom of GameSir C2 arcade fightstick and remove the base plate.

c. Disconnect all cables from the buttons and press the plastic tabs on each side of the buttons to

remove all buttons from the top panel.

d. Use a flat screw driver to secure the center shaft at the bottom of the joystick. Then rotate off the

small ball at the top of the joystick.

e. Unscrew the 6 screws on the top panel and remove the top panel.

f. Replace the panel wallpaper.

g. Install the top panel, action buttons and top screws.

h. Reconnect the correct color cable to the button according to the following cable assignment label.

Yellow

Orange

Blue Black Purple

Green Red Brown

Top Panel

Action Buttons

Screws

Replaceable Panel Wallpaper

i. Install the base plate and screws.

PS4/PS4 Slim/PS4 Pro

Xbox One/Xbox One S/Xbox One X

Nintendo Switch

PC Windows 7( )

Android4.0( )

PlayStation4 and PS4™ are registered trademark or trademarks of Sony Computer Entertainment Inc. Windows™ and Xbox One™ are registered

trademarks of Microsoft Inc. Nintendo Switch™ is a registered trademark of Nintendo Inc. Android™ is a registered trademark of Google Inc. SANWA™ is a

are not binding. Contents, designs and specifications are subject to change without notice and may vary from one country to another. This product is not

distributed under an approved official license and is not sponsored or endorsed by Sony Computer Entertainment Inc. This product is not manufactured by

Sony Computer Entertainment Inc or Microsoft Inc or Google Inc.

NOTICE Please read this Precautions carefully.

CONTAINS SMALL PARTS. Keep out of reach of children under the age of 3. Seek immediate medical attention if swallowed or inhaled.

DO NOT use the product near fire.

DO NOT expose to direct sunlight or high temperatures.

DO NOT leave the product in a humid or dusty environment.

DO NOT impact the product or cause it to fall due to strong impact.

DO NOT touch USB port directly or it might cause malfunctions.

DO NOT strongly bend or pull cable parts.

Use a soft, dry cloth while cleaning.

DO NOT use chemicals such as gasoline or thinner.

DO NOT disassemble, repair or modify.