Installation
YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD.
Web: www.yealink.com | Addr: 309, 3th Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R. China
Copyright
©2019YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD. All rights reserved.
VCC22 - EN
VCC22 Video Conferencing Camera Quick Start Guide (V32.35)
1
VC800
Internet
VCC22
...
...
Camera
VCH50
CP960
2
2
2
VCC22
Video Conferencing Camera
If you only need one VCC22 video conferencing camera, you can connect Camera port to Audio port on VCH50 video conferencing
hub. If you do not use VCH50 to share content, you can also connect Camera port to VC Hub/Phone port on the VC800 codec or
VC Hub/Camera port on the VC880 codec.
VC800 video conferencing system can connect up to 8 VCC22 video conferencing cameras. VC880/PVT980 video conferencing
system can connect up to 9 VCC22 video conferencing cameras.
PoE switch
and Ethernet cables should be purchased separately. In order to ensure the best network signal, please purchase UL
certified CAT5E Ethernet cables and recommended PoE switch. The maximum length of each Ethernet cable is 100 meters. Contact the
agents or hotline support to get the recommended PoE switch models.
The cable should be replaced at once if its skin is broken.
Quick Start Guide
Mounting Bracket
and Accessories
VESA Accessory
Velcro×2
(One Velcro is on the bracket)
Packaging Contents
Connections (take the VC800 video conferencing system for an example):
Ethernet Cable
Ethernet Cable
Ethernet Cable
Ethernet Cable
Ethernet Cable
VCC22 VCC22 VCC22 VCC22
Select one of the following installation methods to install your VCC22 video conferencing camera: 1. Put on a Flat Surface 2. Mount on top
of a TV 3. Mount on a wall 4. Mount on a ceiling 5. Mount onto a TV stand or a tripod.
For more information, refer to Yealink VC800 Full HD Video Conferencing System Quick Start Guide.
IEEE 802.3af compliant
PoE Switch
Applies to firmware version 63.40.0.10(VC880/VC800 )/
1345.32.10.40(PVT980)or later