1 3
4
2
5
© 2016 Koninklijke Philips N.V.
All rights reserved.
4241 210 88021
6
VOC
0.02
8:08
36°C
PM2.5
The formaldehyde sensor will last 24 months* in normal conditions,
however due to dierent usage environments, the sensor may have a
longer or shorter life. We suggest user to replace the formaldehyde
sensor according to indications from appliance
*24months according to Philips internal test and assessment ,test at
average 1ppm equivalent Formaldehyde concentration with Ethanol.
甲醛感应插件在正常使用环境下建议使用时间为24个月*，因使用环境不同，
使用时间有可能会更长或更短。我们建议用户根据飞利浦甲醛感应插件更换
提示，适时更换。
*24个月根据飞利浦内部测试及评估得来，测试在乙醇气体中进行，平均测试
浓度等效于1PPM浓度的甲醛。
首次使用产品，长时间不用或接触高浓度污染气体后甲醛读数
可能过高，这属于正常情况。将产品放置在通风的位置直至甲
醛数值降到0.05以下后使用。
设备长期不用时请放置在干燥通风处。
请远离酒精、香水、油烟等高浓度污染环境，如受污染请通风
处理。
Note:
To ensure formaldehyde sensing
For rst time turning on, not using it for a long time or impacted
by high concentrated pollution gas, formaldehyde value might
show a higher reading initially, this is normal. Place the appliance
in a ventilated area until value drops to below 0.05.
For storage, please keep under dry and ventilated environment.
Please keep it away from high concentrated substances like
alcohol, perfume, oil smoke, etc. If interfered by these substance
and showing high value readings, place the appliance in a
ventilated area to recover.
2
1
3
1
2
3
注意事项
为了保证甲醛测量准确
-
1
-
2
