首次使用产品,长时间不用或接触高浓度污染气体后甲醛读数
可能过高,这属于正常情况。将产品放置在通风的位置直至甲
醛数值降到0.05以下后使用。
设备长期不用时请放置在干燥通风处。
请远离酒精、香水、油烟等高浓度污染环境,如受污染请通风
处理。
Note:
To ensure formaldehyde sensing
For rst time turning on, not using it for a long time or impacted
by high concentrated pollution gas, formaldehyde value might
show a higher reading initially, this is normal. Place the appliance
in a ventilated area until value drops to below 0.05.
For storage, please keep under dry and ventilated environment.
Please keep it away from high concentrated substances like
alcohol, perfume, oil smoke, etc. If interfered by these substance
and showing high value readings, place the appliance in a
ventilated area to recover.
2
1
3
1
2
3
注意事项
为了保证甲醛测量准确