Sony DAV-F200 ユーザーマニュアル

Sony Corporation Printed in China

(1)

http://www.sony.net/

3-398-069-51(1)

DVD Home Theatre System

GB

CT

Operating Instructions

ợ䒌娎㕲㙜

2

GB

To reduce the risk of fire or electric

shock, do not expose this apparatus to

rain or moisture.

Do not install the appliance in a confined space, such

as a bookcase or built-in cabinet.

To prevent fire, do not cover the ventilation of the

apparatus with news papers, table-cloths, curtains, etc.

And don’t place lighted candles on the apparatus.

To prevent fire or shock hazard, do not place objects

filled with liquids, such as vases, on the apparatus.

Batteries or batteries installed apparatus shall not be

exposed to excessive heat such as sunshine, fire or the

like.

This appliance is

classified as a CLASS 1

LASER product. This

marking is located on the

rear exterior of control

unit.

Precautions

On power sources

• AC power cord (mains lead) must be changed only at

the qualified service shop.

• The system is not disconnected from the AC power

source (mains) as long as the subwoofer is connected

to the wall outlet (mains), even if the control unit

itself has been turned off.

• Install this system so that the AC power cord (mains

lead) can be unplugged from the wall socket

immediately in the event of trouble.

WARNING

3

GB

About This Operating

Instructions

• The instructions in this Operating Instructions

describe the controls on the remote. You can

also use the controls on the control unit if they

have the same or similar names as those on the

remote.

• The Control Menu items may vary depending

on the area.

• “DVD” may be used as a general term for a

DVD VIDEO, DVD+RW/DVD+R, and DVD-

RW/DVD-R.

• The default setting is underlined.

GB

4

GB

Table of Contents

About This Operating Instructions..........3

Playable Discs.........................................5

Getting Started

Step 1: Positioning the System ...11

Step 2: Connecting the System ...15

Step 3: Performing the Quick

Setup ........................................26

Step 4: Changing the Sound

Source ......................................29

Disc

Playing a Disc .......................................30

Using Play Mode...................................35

Searching/Selecting a Disc ...................38

Playing MP3 Files/JPEG Image Files... 41

Enjoying DivX

®

Videos ....................... 45

Restricting Playback of the Disc........... 47

Sound Adjustment

Enjoying Surround Sound by Using

Decoding Mode ..............................50

Selecting the Sound Mode .................... 52

Enjoying Multiplex Broadcast Sound... 53

Tuner

Presetting Radio Stations ......................54

Listening to the Radio........................... 55

Control for HDMI/External

Audio Device

Using the Control for HDMI Function for

“BRAVIA” Sync ............................ 57

Playing Back Audio Files/JPEG Image

Files of a USB Device .................... 60

Transferring Songs in a USB Device....69

Using the DIGITAL MEDIA PORT

Adapter ........................................... 72

Other Operation

Using the Setup Display........................73

Adjusting the Delay Between the Picture

and Sound ....................................... 79

Changing the Input Level of the

Sound..............................................79

Enjoying the Sound at Low Volume..... 80

Using the Sleep Timer .......................... 80

Changing the Brightness of the Front

Panel Display and Illumination...... 81

Viewing Information About the Disc ... 82

Controlling the TV with the Supplied

Remote ........................................... 85

Returning to the Default Settings ......... 87

Additional Information

Precautions ........................................... 89

Notes about the Discs ........................... 90

Troubleshooting.................................... 91

Self-diagnosis Function ........................ 99

Specifications ..................................... 100

Glossary.............................................. 101

Language Code List............................ 103

Index to Parts and Control.................. 104

Guide to the Control Menu Display ... 109

Index ................................................... 113

5

GB

Playable Discs

1)

MP3 (MPEG1 Audio Layer 3) is a standard format defined by ISO/MPEG which compresses audio data. MP3 files

must be in MPEG1 Audio Layer 3 format.

2)

JPEG image files must conform to the DCF image file format. (DCF “Design rule for Camera File system”: Image

standards for digital cameras regulated by Japan Electronics and Information Technology Industries Association

(JEITA).)

Type Disc logo Characteristics Icon

DVD VIDEO • DVD VIDEO

• DVD-R/DVD-RW in DVD

VIDEO format or video mode

• DVD+R/DVD+RW in DVD

VIDEO format

VR (Video

Recording) mode

• DVD-R/DVD-RW in VR (Video

Recording) mode (except for

DVD-R DL)

VIDEO CD • VIDEO CD (Ver. 1.1 and 2.0 discs)

• Super VCD

• CD-R/CD-RW/CD-ROM in video

CD format or Super VCD format

CD • Audio CD

• CD-R/CD-RW in audio CD format

DATA CD – • CD-R/CD-RW/CD-ROM in

DATA CD format, containing MP3

files

1)

, JPEG image files

2)

, and

DivX video files

3)4)

, and

conforming to ISO 9660

5)

Level 1/

Level 2, or Joliet (extended format)

DATA DVD – • DVD-ROM/DVD-R/DVD-RW/

DVD+R/DVD+RW in DATA

DVD format, containing MP3

files

1)

, JPEG

image files

2)

, and

DivX video files

3)4)

, and

conforming to UDF (Universal

Disk Format)

6

GB

3)

DivX

®

is a video file compression technology, developed by DivX, Inc.

4)

DivX, DivX Certified, and associated logos are trademarks of DivX, Inc. and are used under license.

5)

A logical format of files and folders on CD-ROMs, defined by ISO (International Organization for

Standardization).

“DVD-RW,” “DVD+RW,” “DVD+R,”“DVD VIDEO,” and the “CD” logos are trademarks.

The system cannot play the following discs:

• CD-ROM/CD-R/CD-RW other than those recorded in the formats listed on page 5

• CD-ROM recorded in PHOTO CD format

• Data part of CD-Extra

• CD Graphics disc

• DVD Audio

• DATA DVD that does not contain MP3 files, JPEG image files, or DivX video files

•DVD-RAM

• Super Audio CD

Also, the system cannot play the following discs:

• A DVD VIDEO with a different region code (page 7)

• A disc that has a non-standard shape (e.g., card, heart)

• A disc with paper or stickers on it

• A disc that has the adhesive of cellophane tape or a sticker still left on it

In some cases, CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/DVD+RW cannot be played on this system

due to the recording quality or physical condition of the disc, or the characteristics of the recording

device and authoring software.

The disc will not play if it has not been correctly finalized. For more information, refer to the operating

instructions for the recording device.

Note that some playback functions may not work with some DVD+RWs/DVD+Rs, even if they have

been correctly finalized. In this case, view the disc by normal playback. Also some DATA CDs/DATA

DVDs created in Packet Write format cannot be played.

Music discs encoded with copyright protection technologies

This product is designed to play back discs that conform to the Compact Disc (CD) standard.

Recently, various music discs encoded with copyright protection technologies are marketed by some

record companies. Please be aware that among those discs, there are some that do not conform to the

CD standard and may not be playable by this product.

Example of discs that the system cannot play

Note about CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/DVD+RW

7

GB

Note on DualDiscs

A DualDisc is a two sided disc product which mates DVD recorded material on one side with digital

audio material on the other side. However, since the audio material side does not conform to the

Compact Disc (CD) standard, playback on this product is not guaranteed.

• This system can play a Multi Session CD when an MP3 file is contained in the first session. Any

subsequent MP3 files recorded in later sessions can also be played back.

• This system can play a Multi Session CD when a JPEG image file is contained in the first session.

Any subsequent JPEG image files recorded in later sessions can also be played back.

• If MP3 files and JPEG image files in music CD format or video CD format are recorded in the first

session, only the first session will be played back.

Your system has a region code printed on the rear of the control unit and will only play a DVD labeled

with the same region code.

A DVD VIDEO labeled will also play on this system.

If you try to play any other DVD VIDEO, the message [Playback prohibited by area limitations.] will

appear on the TV screen. Depending on the DVD VIDEO, no region code indication may be given even

though playing the DVD VIDEO is prohibited by area restrictions.

Some playback operations on a DVD or VIDEO CD may be intentionally set by software producers.

Since this system will play a DVD or VIDEO CD according to the disc contents the software producers

designed, some playback features may not be available. Be sure to read the operating instructions

supplied with the DVD or VIDEO CD.

This product incorporates copyright protection technology that is protected by U.S. patents and other

intellectual property rights. Use of this copyright protection technology must be authorized by

Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized

by Macrovision. Reverse engineering or disassembly is prohibited.

This system incorporates with Dolby* Digital and the DTS** Digital Surround System.

* Manufactured under license from Dolby Laboratories.

Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.

** Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 &

other U.S. and worldwide patents issued & pending.

DTS and DTS 2.0 + Digital Out are registered trademarks and the DTS logos and Symbol are trademarks of DTS,

About Multi Session CD

Region code

Note about playback operations of a DVD or VIDEO CD

Copyrights

ALL

8

GB

This system incorporates High-Definition Multimedia Interface (HDMI

TM

) technology.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered

trademarks of HDMI Licensing LLC.

“BRAVIA” is a trademark of Sony Corporation.

9

GB

Getting Started

To insert batteries into the remote

Insert two R6 (size AA) batteries (supplied) by matching the 3 and # ends on the batteries to the

markings inside the compartment.

Note

• Do not leave the remote in an extremely hot or humid place.

• Do not use a new battery with an old one.

• Do not drop any foreign object into the remote casing, particularly when replacing the batteries.

Getting Started

Checking the supplied items

• Control unit (1)

• Front speakers (2)

• Subwoofer (1)

• Stand cover (1)

• Screws (4)

• Seals (for stand cover) (2)

• FM wire antenna (aerial) (1)

• Video cord (1)

• Cable tie (1)

• Remote commander

(remote) (1)

• R6 (size AA) batteries (2)

• Operating Instructions (this

manual)

• Speaker and TV Connections

(supplement)

Preparing the remote

10

GB

Getting Started

• If you do not intend to use the remote for an extended period of time, remove the batteries to avoid possible damage

from battery leakage and corrosion.

About operation of the remote

You can operate this system and TV using the supplied remote.

x System operation

Press TV so that TV flashes four times.

The remote enters system operation mode. When operating the system, point the remote at the center

of the panel display.

x TV operation

Press TV so that TV lights up for 1 second.

The remote enters the TV mode. To operate the system, point the remote at the TV. For details, see

“Controlling the TV with the Supplied Remote” (page 85).

Note

• Do not expose the remote sensor to direct sunlight or lighting apparatus. Doing so may cause a malfunction.

DVD HOME THEATRE SYSTEM DAV-F500

A.F.D. STD D.C.S.

FUNCTION

VOL

Remote sensor

TV

11

GB

Getting Started

Step 1: Positioning the System

For the best possible surround sound, all the speakers other than the subwoofer should be placed at the

same distance from the listening position (A).

Place the system as illustrated below.

Note

• Leave a space for inserting/ejecting the disc (approximately 15 cm) to the right (disc slot) side of the control unit

when placing an object such as a speaker nearby.

• Do not set the speakers in an inclined position.

• Do not place the speakers in locations that are:

– Extremely hot or cold

– Dusty or dirty

– Very humid

– Subject to vibrations

– Subject to direct sunlight

• Use caution when placing the speakers and/or speaker stands attached to the speakers on a specially treated (waxed,

oiled, polished, etc.) floor, as staining or discoloration may result.

• Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzine.

• Do not lean or hang on the speaker, as the speaker may fall down.

• Image distortion on the TV screen may occur depending on the location of the subwoofer. In this case, place the

subwoofer away from the TV.

• Do not block the ventilation slots of the subwoofer (page 107).

A

B

A

D

C

A

A Front speaker (L (left))

B Front speaker (R (right))

C Subwoofer

D Control unit

DVD HOME THEATRE SYSTEM DAV-F500

A.F.D. STD

D.C.S.

FUNCTION

VOL

Approximately 15 cm

12

GB

Getting Started

• Do not place your hand on the speaker driver when lifting the subwoofer. Doing so, the speaker driver may be

damaged. When lifting, hold the foot of the subwoofer.

Ti

p

• It is recommended to place the subwoofer on a hard floor.

• You can also place the subwoofer either side, facing the listening position.

To use the speakers efficiently

Position the speakers so that the distance between each speaker and the listening position (A and B)

is the same (from 0.0 to 7.0 meters).

Note

• Place both front speakers the same distance apart as they are from the listening position (to form an isosceles

triangle).

• The front speakers should be placed at least 0.6 m apart.

• Place the front speakers forward of the TV. Make sure there are no reflecting obstacles in front of the speakers.

• Both front speakers should be pointed straight forward. Do not place the speakers at an angle.

Speaker driver

Front speaker (L)

TV

Subwoofer

Front speaker (R)

Correct

Incorrect

13

GB

Getting Started

• It is recommended to place the front speakers on the edge of a table or rack, etc., to prevent sound reflection.

To install the speakers on a wall

Before installing the speakers on the wall, prepare screws (not supplied) that are suitable for the hole

on the rear of each speaker.

1 Remove the screw (pre-installed) at the rear of the speaker.

2 Detach the speaker stand.

3 Disconnect the speaker cords from the speaker.

4 Take the speaker stand out.

Recommended

Side view

30 mm

4 mm

Hole on the rear of

the speaker

5 mm

10 mm

Screw (pre-installed)

14

GB

Getting Started

5 Reconnect the speaker cords to the speakers.

The connector and color tube of the speaker cords are the same color as the label of the jacks to be

connected. Be sure to match the speaker cords to the appropriate terminals on the speakers: the

speaker cord with the color tube to 3, and the speaker cord without the color tube to #. Do not

catch the speaker cord insulation in the speaker terminals.

6 Fasten the screws to the wall.

7 Hang the speakers on the screws.

Note

• Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach

the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where

reinforcement is applied.

• Contact a screw shop or installer regarding the wall material or screws to be used.

• Sony is not responsible for accident or damage caused by improper installation, insufficient wall strength or

improper screw installation, natural calamity, etc.

Color tube

(–)

(+)

Connector

Rear of speaker

Color tube

Front speaker (L): White

Front speaker (R): Red

5 to 7 mm

Rear of the speaker

15

GB

Getting Started

Step 2: Connecting the System

See the connection diagram below, and read the additional information from 1 to 6 on the following

pages.

Note

• Be sure to make connections securely to avoid hum and noise.

• When you connect another component with a volume control, turn up the volume of the other components to a level

where sound is not distorted.

DVD HOME THEATRE SYSTEM DAV-F500

A.F.D. STD D.C.S.

FUNCTION

VOL

SPEAKER

IMPEDANCE USE 3

FRONT R FRONT L

SYSTEM CONTROL

ONLY FOR HCD-F200

6 AC power cord

(mains lead)

2 Front speaker (R)

2 Front speaker (L)

4 VCR, digital satellite

receiver, or PlayStation, etc.

3 TV

: Signal flow

Subwoofer

Bottom of the

subwoofer

5 FM wire antenna (aerial)

1 Plug

4 DIGITAL MEDIA PORT

adapter

16

GB

Getting Started

To remove the panel cover of the control unit

Before connecting the cables, remove the panel cover from the control unit.

Connect the system connector of the control unit to the SYSTEM CONTROL jack on the bottom of the

subwoofer.

Insert the plug of the SYSTEM CONTROL connector, then secure the screws of the plug.

Insert the speaker connector of the front left speaker into the FRONT L jack, and insert the speaker

connector of the front right speaker into the FRONT R jack on the bottom of the subwoofer.

1 Connecting the Control unit

2 Connecting the Speakers

A

U

D

I

O

I

N

V

I

D

E

O

R

L

T

V

A

N

T

E

N

A

P

B

/

C

B

P

R

/

C

R

Y

C

O

M

P

O

N

E

N

T

V

I

D

E

O

U

T

C

O

A

X

I

A

L

D

I

G

I

T

A

L

O

U

T

D

I

G

I

T

A

L

I

N

O

P

T

I

C

A

L

D

I

G

I

T

A

L

I

N

O

P

T

I

C

A

L

D

I

G

I

T

A

L

I

N

C

O

A

X

I

A

L

T

V

S

A

T

/

C

A

B

L

E

D

M

P

O

R

T

S

A

T

/

C

A

B

L

E

V

I

D

E

O

U

T

D

C

5

V

0

.

7

A

M

a

x

O

U

T

F

M

7

5

C

O

A

X

I

A

L

Push the B mark on the left side

of the panel cover, then slide to

the right.

SPEAKER

IMPEDANCE USE 3

FRONT R FRONT L

SYSTEM CONTROL

ONLY FOR HCD-F200

Rear of the control unit

Bottom of the subwoofer

Screws

Plug

SYSTEM CONTROL cable

17

GB

Getting Started

To set the speakers at an angle

You can select the angle for the front speaker: 0° and 10°. (The speakers are set to an angle of 10° at

shipping.)

1 Remove the screw (pre-installed) at the rear of the speaker.

2 Detach the speaker stand.

3 Reattach the speaker stand by engaging the protrusions on the stand in the holes for

either angle 0° or 10°.

SPEAKER

IMPEDANCE USE 3

FRONT R FRONT L

SYSTEM CONTROL

ONLY FOR HCD-F200

S

P

E

A

K

E

R

IM

P

E

D

A

N

C

E

U

S

E

3

FRONT R

FRONT L

Bottom of the subwoofer

Red (Front speaker (R))

White (Front speaker (L))

Front speaker (R)Front speaker (L)

Screw (pre-installed)

0° or 10°

Angle: 0° (vertical) Angle: 10°

18

GB

Getting Started

4 Thread the speaker cord though the slit of the stand base to prevent the cord being

twisted or pinched.

5 Tighten the screw to secure the speaker stand.

Note

• Be careful not to pinch the speaker cords while tightening screws.

19

GB

Getting Started

Be sure to disconnect the AC power cords of all components from their wall outlets (mains) before

making connections.

To listen to TV sound from the speakers of the system, connect the TV and the system with the audio

cord (not supplied) (A).

For video output to your TV, check the video input jacks of the TV, and select connection method A,

B, or C. Picture quality improves in order from A (standard) to C (HDMI).

When the TV has the digital optical output jack, you can improve sound quality by connecting with the

digital cord (B).

* If your TV accepts progressive format signals, use this connection and set the output signal of the system to

progressive format (page 27).

** HDMI (High-Definition Multimedia Interface)

If your TV has the HDMI jack, use this connection and select the type of output signal (page 27).

3 Connecting the TV

A

U

D

I

O

I

N

V

I

D

E

O

R

L

T

V

A

N

T

E

N

NA

P

B

/C

B

P

R

/C

R

Y

C

O

M

P

O

N

EN

T

V

I

D

E

O

U

T

C

O

A

XI

A

L

D

IG

I

T

A

L

O

U

T

D

I

G

I

T

A

L

I

N

O

P

T

I

C

A

L

D

I

G

I

T

A

L

I

N

O

P

T

I

C

A

L

D

I

G

I

T

A

L

I

N

C

O

A

X

I

A

L

T

V

S

A

T

/

C

A

B

LE

D

M

P

O

R

T

S

A

T

/

C

A

B

LE

V

I

D

E

O

U

T

D

C

5

V

0

.

7

A

M

a

x

O

U

T

F

M

7

5

C

O

A

X

I

A

L

O

U

T

DIGITAL IN

OPTICAL

T

V

VIDEO

O

UT

AUDIO IN

R

L

TV

P

B

/C

B

P

R

/C

R

Y

COMPONENT

V

I

D

E

O

U

T

Connector panel of the control unit

To the COMPONENT VIDEO IN jacks

of the TV

To the HDMI IN jack of the TV

To the VIDEO IN jack of

the TV

To the AUDIO OUT jacks of the TV

Component video cord

(not supplied)*

Video cord

(supplied)

HDMI** cable

(not supplied)

Audio cord

(not supplied)

Green

Blue

Red

White

Red

To the digital optical output jack of the TV

Digital optical cord

(not supplied)

20

GB

Getting Started

Note

• When connecting the jack, insert the plug into the jack as far as it will go.

• When connecting the digital optical cord, insert the connector until it clicks (B).

• During the “DMPORT” function, video signal is not output from the HDMI OUT and VIDEO OUT

(COMPONENT) jacks. Select connection method A to obtain pictures since the video signal is output from the

VIDEO OUT (VIDEO) jack.

• The system can accept both digital and analog signals. Digital signals have priority over analog signals. (COAXIAL

has priority over OPTICAL.) If the digital signal ceases, the analog signal will be processed after 2 seconds.

Ti

p

• You can connect another component, such as a VCR, digital satellite receiver, or PlayStation, to the TV (AUDIO

IN) jack (A) or TV (DIGITAL IN OPTICAL) jack (B) instead of the TV.

To change the color system (PAL or NTSC) (Southeast Asian models

only)

Depending on the TV to be connected, you may be required to select either PAL or NTSC for the color

system.

The initial setting of the system is NTSC.

1 Turn off the system by pressing \/1.

2 Turn on the system by pressing \/1 while pressing VOL – on the front panel.

Each time you perform this operation, the color system toggles between PAL and NTSC.

“NTSC” lights up in the front panel display when the color system is set to NTSC.

You can enjoy the connected component using the speakers of the system.

• Digital satellite receiver, etc.: A

• DIGITAL MEDIA PORT adapter: B

• AV receiver, etc.: C (only when DVD function is selected)

4 Connecting the other components

ページが読み込まれています...

Sony DAV-F200 ユーザーマニュアル

Sony DAV-F200 ユーザーマニュアル

他の言語で

関連論文

その他のドキュメント