Creative MUVO TX クイックスタートガイド

P/N : 03PD051100007 Rev B

Quick Start

English. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Français. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Español . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Brasileiro. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87

Türkçe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

Language TOC.fm Page 1 Thursday, May 20, 2004 4:34 PM

Language TOC.fm Page 2 Thursday, May 20, 2004 4:34 PM

1

English

Your Player At A Glance

Liquid Crystal

Display (LCD)

Play/Pause

Microphone

Scroller

Volume

Increase

Volume

Decrease

Front View Side View

Earphone

connector

Volume

Increase

MuVo TX FM QSB English 20th May.fm Page 1 Wednesday, May 19, 2004 4:44 PM

2

English

Getting Started

1

Install the Software

Your Creative MuVo TX FM comes with software that helps you create audio tracks, manage

your music library and use your player.

1. Make sure that your player is not connected to your computer.

2. Insert the Installation CD into your CD-ROM drive.

3. The disc supports Windows AutoPlay mode and starts running automatically. If not, click

Start

→ Run. In the Open box, type d:\ctrun\ctrun.exe (replace d:\ with the drive

letter of your CD/DVD-ROM drive), and then click the OK button.

4. Click the Install software for Creative MuVo TX FM to select it.

5. Click the OK button.

6. Follow the instructions on the screen.

7. When prompted, restart your system.

For Windows 2000/XP users:

To install the software, you must log in as the computer administrator. For more

information, refer to your operating system's online Help.

MuVo TX FM QSB English 20th May.fm Page 2 Wednesday, May 19, 2004 4:44 PM

3

2

Connect the USB Flash Drive to your

computer

Do not press the buttons on your USB Flash Drive while connecting it to your computer.

USB port

Battery

module

USB port

USB Flash

Drive

a

b

MuVo TX FM QSB English 20th May.fm Page 3 Wednesday, May 19, 2004 4:44 PM

4

3

Transferring tracks or files

1. After connecting the USB Flash Drive to your computer, you will see

Figure 1 on the player's LCD screen.

2. On your Desktop, right-click the My Computer icon, and then click

Explore. The USB Flash Drive appears as a removable disk icon

(Figure 2).

3. Drag and drop files into your player. During the transfer, Figure 3

appears on the LCD screen.

You can also use applications such as Creative MediaSource (included with the Installation CD)

to manage the music tracks in your player.

For Windows 98 SE users only:

Do not remove the USB Flash Drive until Figure 1 appears on the screen again for at least

five seconds.

For other Windows operating system users only:

Make sure you stop your player properly, using the Eject or Safely remove USB Mass

Storage Device option, before disconnecting it from your computer. Failure to

disconnect the player properly can result in corrupted files or music tracks. See the

“Troubleshooting” section in this booklet for details.

Music tracks are played in alphanumeric order starting with the tracks in the root level

followed by those in folders. The MuVo TX FM will only play supported music tracks that

are stored in either the root level or the first level of a folder. Tracks stored in sub-folders

of a folder will not be recognized.

Figure 1

Figure 2

Figure 3

MuVo TX FM QSB English 20th May.fm Page 4 Wednesday, May 19, 2004 4:44 PM

5

Formatting Your Player

If you need to format your player, back up the files in your player first. When you format your

player, all songs and files will be deleted. By default, your player is already formatted.

1. Connect your player to your computer's USB port.

2. Launch Windows Explorer on your computer. Your player is recognized as a Removable

Disk in Windows Explorer.

3. Right-click the Removable Disk icon and

click the Format option. The Format F:\

dialog box appears (replace F:\ with the

drive letter of your player).

4. Follow the instructions on the screen to

format your player.

5. After the formatting is complete, make sure you stop your player before disconnecting it

from your computer.

For more information about using Windows Explorer, refer to its online Help.

Your MuVo TX FM must be formatted in the FAT or FAT16 file system only. Do not select

FAT32 or NTFS. Those formats are not recognized by your MuVo TX FM.

Windows 98SE users must have MuVo TX FM drivers installed before formatting the

player.

MuVo TX FM QSB English 20th May.fm Page 5 Wednesday, May 19, 2004 4:44 PM

6

How To Use Your Player

Remember to unplug the USB Flash Drive from your computer and insert it into the battery

module before turning on the player. For more usage information, refer to the PDF User's

Guide. Go to d:\manual\<language>\manual.pdf (replace d:\ with the drive letter of your

CD\DVD-ROM drive and <language> with the language the document is in).

Inserting the battery

The life of a battery depends on the type of battery used. It is recommended that you use

an alkaline battery. With an alkaline battery, you can play up to fourteen hours worth of

.MP3 files or eleven hours of .WMA files.

a

b

c

MuVo TX FM QSB English 20th May.fm Page 6 Wednesday, May 19, 2004 4:44 PM

7

Using Your Scroller

"Scroll Select", indicates that you should use the Scroller to scroll through options, and then

select the option by pressing the Scroller.

Using Your Player

Turning on the player

Press and hold the Play/Pause button for a few seconds. The Creative logo appears

on the screen, followed by the Creative MuVo TX FM logo, and there is music playback.

If your player contains no audio tracks, the message "No Music" or "No Recording" will appear

onscreen, depending on whether you are in Music or Recordings mode.

Turning off the player

Press and hold the Play/Pause button for a few seconds until after the Power off

message disappears

1. Use the Scroller to scroll through

options.

3. Press the Scroller to select the option.

2. Scroll to an option. 4. The selection appears.

MuVo TX FM QSB English 20th May.fm Page 7 Wednesday, May 19, 2004 4:44 PM

8

Stopping/Pausing a music track

Press the Play/Pause button .

Skipping folders (Albums)

1. Press the Scroller.

2. Scroll Select Skip Folder (Figure 4).

3. The Skip Folder menu appears.

4. Scroll to the folder that you want to skip to.

5. To resume normal playback, press the Scroller again.

Making a voice recording

1. Press the Scroller. Scroll Select Microphone (Figure 5).

2. The recording bar appears onscreen.

3. Press the Play/Pause button to start the recording.

4. Press the Play/Pause button again to end the recording.

5. A name is automatically assigned to your recording and is saved in your player. The naming

convention typically used is: VOC [Current File Number].

For easy navigation, store your albums as folders in the root directory.

When recording, the available recording time is determined by:

- available memory space in your player.

- battery power remaining in your player.

Figure 4

Figure 5

MuVo TX FM QSB English 20th May.fm Page 8 Wednesday, May 19, 2004 4:44 PM

9

Listening to FM radio

To change the FM region

Perform these steps first when scanning for stations for the first time.

1. Press the Scroller.

The Main Menu appears.

2. Scroll Select the Settings icon (Figure 6). A list appears.

3. Scroll Select the FM Region icon (Figure 7). A list appears.

Scroll Select the region that you are in.

To perform an autoscan and autosave

1. Press the Scroller.

The Main Menu appears.

2. Scroll Select the FM Radio icon (Figure 8).

A radio frequency appears on the LCD screen.

3. Press the Scroller.

4. Scroll Select the Autoscan icon (Figure 9).

The player scans and stores channels it detects. At the end of

the autoscan, it plays the first channel.

To select a channel

1. Press the Scroller.

The Main Menu appears.

2. Scroll Select the FM Radio icon (Figure 8).

A radio frequency appears on the LCD screen.

3. Turn the Scroller to select the preset channel you want.

Figure 6

Figure 7

Figure 8

Figure 9

MuVo TX FM QSB English 20th May.fm Page 9 Wednesday, May 19, 2004 4:44 PM

10

Software Included

Creative MediaSource

Creative MediaSource allows you to rip CDs and create high quality digital audio files, play and

organize media files on your computer as well as transfer music tracks or files seamlessly to

and from your player. Special features such as SMARTFIT, using intelligent track management

and WMA compression, enable you to transfer a higher number of music tracks to your player.

For more information, refer to the Creative MediaSource online Help.

Go to Start

→ Programs/All Programs → Creative → Creative MediaSource →

Creative MediaSource Organizer.

MuVo TX FM QSB English 20th May.fm Page 10 Wednesday, May 19, 2004 4:44 PM

11

Troubleshooting

When you turn on the player, an error message “File system error” appears

before the player turns off.

Try formatting your player. See section "Formatting Your Player".

After playing the first few music tracks, the player skips a music track.

The player will only play .MP3, .WMA or .WAV recordings. Other files will be skipped.

Files or music tracks are corrupted when transferred to the player.

After the transfer is complete, make sure you stop your player before disconnecting it from

your computer.

The player turns off immediately after it is turned on.

Check that the battery is not depleted.

I have to change the battery quite often. Is there anything I can do to make it last

longer?

Some operations consume more battery power:

• a long backlight timeout setting. A shorter timeout conserves battery power.

• frequent use of fast forward/reverse.

• turning the player on/off too many times.

• frequent use of passive speakers or high-powered headphones.

• playback of .WMA files.

Can I play DRM-protected WMA files on my Creative MuVo TX FM?

Yes.

WMA files with Digital Rights Management (DRM) code cannot be transferred into your

player using a drag-and-drop operation. Transfer these files using applications like

Windows Media Player or Creative MediaSource. Refer to your player’s User’s Guide for

more information on transferring audio.

MuVo TX FM QSB English 20th May.fm Page 11 Wednesday, May 19, 2004 4:44 PM

12

More Information

Register your product!

Enjoy a host of benefits by registering your product during installation, or at

www.creative.com/register. Benefits include:

• Service and product support from Creative

• Exclusive updates on promotions and events.

Technical Support and Warranty information

You can find Technical Support, Warranty and other information in the Installation CD.

(replace d:\ with the drive letter of your CD-ROM/DVD-ROM drive, <region> with the

region that you are in, and <language> with the language that your document is in)

Technical Support d:\support\<language>\support.pdf

You can also click Start → Programs → Creative → Technical Support

Warranty d:\warranty\<region>\<language>\warranty.pdf

Please keep your Proof of Purchase for the duration of the warranty period.

Regulatory d:\fcc\<language>\doc.pdf

User’s Guide d:\manual\<language>\manual.pdf

WARNING: Handling the cord(s) on this product may expose you to lead, a chemical

known to the State of California to cause cancer and birth defects or other reproductive

harm. Wash hands after handling.

Creative Knowledge Base

Resolve and troubleshoot technical queries at Creative's 24-hour self-help Knowledge Base

.

Go to www.creative.com and select your region.

trademarks or registered trademarks of Creative Technology Ltd. in the United States and/or other countries. NOMAD i

s

a registered trademark of Aonix and is used by Creative Technology Ltd. and/or its affiliates under license. Microsoft, Window

s

and the Windows logo are registered trademarks of Microsoft Corporation. All other products are trademarks or registered

trademarks of their respective owners and are hereby recognized as such. All specifications are subject to change withou

t

prior notice. Actual contents may differ slightly from those pictured.

MuVo TX FM QSB English 20th May.fm Page 12 Wednesday, May 19, 2004 4:44 PM

13

Français

Votre lecteur en un coup d'œil

Ecran à cristaux

liquides (LCD)

Lecture/Pause

Microphone

Molette

Augmentation

du volume

Diminution

du volume

Vue avant Vue latérale

Connecteur

des écouteurs

CLI_MuVo TX FM QSB.book Page 13 Thursday, May 13, 2004 12:33 PM

14

Français

Démarrage

1

Installation du logiciel

Votre Creative MuVo TX FM est livré avec un logiciel qui permet de créer des pistes audio, de

gérer une bibliothèque de musique et d'utiliser le lecteur.

1. Assurez-vous que le lecteur n’est pas connecté à l’ordinateur.

2. Insérez le CD d'installation dans le lecteur de CD-ROM.

3. Le disque prend en charge le mode exécution automatique de Windows et démarre

automatiquement. Dans le cas contraire, cliquez sur Démarrer

→ Exécuter. Dans le

champ Ouvrir, tapez d:\ctrun\ctrun.exe (remplacez d:\ par la lettre de votre lecteur de

CD/DVD-ROM), puis cliquez sur le bouton OK.

4. Cliquez sur l’option Installer le logiciel pour Creative MuVo TX FM pour la

sélectionner.

5. Cliquez sur le bouton OK.

6. Suivez les instructions apparaissant à l'écran.

7. A l'invite, redémarrez votre système.

Pour les utilisateurs Windows 2000/XP :

Pour installer le logiciel, vous devez vous connecter en tant qu'administrateur système.

Pour plus d'informations, consultez l'aide en ligne de votre système d'exploitation.

CLI_MuVo TX FM QSB.book Page 14 Thursday, May 13, 2004 12:33 PM

15

2

Connexion du Flash Drive USB à votre

ordinateur

N’appuyez pas sur les boutons de votre Flash Drive USB lorsque vous le connectez à votre

ordinateur.

Port USB

Module

de pile

Port USB

Flash Drive

USB

a

b

CLI_MuVo TX FM QSB.book Page 15 Thursday, May 13, 2004 12:33 PM

16

3

Transfert de pistes ou de fichiers

1. Après connexion du Flash Drive USB à votre ordinateur, Figure 1

apparaît sur l’écran LCD du lecteur.

2. Sur votre Poste de travail, cliquez avec le bouton droit sur l'icône

Poste de travail, puis sur Explorer. L’icône du Flash Drive USB

représente un disque amovible (Figure 2).

3. Glissez-déplacez les fichiers vers votre lecteur. Lors du transfert,

Figure 3 apparaît sur l’écran LCD.

Vous pouvez également utiliser des applications telles que Creative MediaSource (inclus sur le

CD d’installation) pour gérer les pistes musicales sur votre lecteur.

Pour les utilisateurs Windows 98 Deuxième Edition uniquement :

Ne retirez pas le Flash Drive USB jusqu’à ce que la figure 1 apparaisse de nouveau à l’écran

pendant au moins cinq secondes.

Pour les utilisateurs d’autres systèmes d’exploitation Windows uniquement :

Assurez-vous de correctement arrêter votre lecteur, en utilisant l’option Ejecter ou

Supprimer le périphérique de stockage USB en toute sécurité, avant de le

déconnecter de votre ordinateur. Les fichiers ou les pistes musicales risquent d’être

corrompus si le lecteur n’est pas correctement déconnecter. Reportez-vous à la section «

Dépannage » de cette brochure pour plus de détails.

Les pistes musicales sont lues dans un ordre alphanumérique, en commençant par les

pistes situées à la racine suivies de celles situées dans les dossiers. Le lecteur MuVo TX FM

ne lit que les pistes musicales prises en charge qui sont stockées soit à la racine, soit dans

le premier niveau de dossier. Les pistes stockées dans les sous-dossiers ne sont pas

reconnues.

Figure 1

Figure 2

Figure 3

CLI_MuVo TX FM QSB.book Page 16 Thursday, May 13, 2004 12:33 PM

17

Formatage de votre lecteur

Si vous devez formater votre lecteur, sauvegardez tout d’abord les fichiers qui se trouvent dans

votre lecteur. Lorsque vous formatez votre lecteur, toutes les chansons et tous les fichiers

seront supprimés. Par défaut, votre lecteur est déjà formaté.

1. Connectez votre lecteur au port USB de votre ordinateur.

2. Lancez l’Explorateur Windows sur votre ordinateur. Votre lecteur est reconnu en tant

que disque amovible dans l’Explorateur Windows.

3. Cliquez avec le bouton droit de la souris sur

l’icône Disque amovible et cliquez sur

l’option Formater. La boîte de dialogue

Formater F:\ s’affiche (remplacez F:\ par la

lettre de votre lecteur).

4. Suivez les instructions qui s'affichent à

l’écran pour formater votre lecteur.

5. Une fois le formatage terminé, assurez-vous de mettre votre lecteur hors tension avant de

le déconnecter de votre ordinateur.

Pour obtenir plus d’informations sur l’utilisation de l’Explorateur Windows, consultez l’aide en

ligne.

Votre lecteur MuVo TX FM doit être formaté au format de système de fichiers FAT ou

FAT16 uniquement. Ne sélectionnez pas le format FAT32 ou NTFS. Si ces options sont

disponibles sur votre système d’exploitation, ces formats ne sont pas reconnus par votre

lecteur MuVo TX FM.

Pour les utilisateurs Windows 98 Deuxième Edition, les pilotes MuVo TX FM doivent être

installés avant de formater le lecteur.

CLI_MuVo TX FM QSB.book Page 17 Thursday, May 13, 2004 12:33 PM

ページが読み込まれています...

Creative MUVO TX クイックスタートガイド

このマニュアルも適しています

Creative MUVO TX クイックスタートガイド

他の言語で

関連論文

その他のドキュメント