安装灵智感应空气传感器
维护
PM2.5
1 2 3
Luy_China_CN
90x127mm
当显示屏显示 时
当显示屏显示 时
清洁纳米级劲护滤网 专业除醛型 (FY4452)
更换纳米级劲护滤网 专业除醛型
(FY4452)
按 检查滤网使用寿命状态
!
在清洁或更换配件后按 3 秒重置该配件
3000 055 05652-1
滤网使用一段时间后可能会散发异味，这是因为吸附了室内的气味导致。建议您将
滤网置于阳光底下晾晒后继续使用。如晾晒后异味仍较明显影响使用体验，建议更
换滤网。
连接
显示
控件
PM2.5 显示 空气质量
指示灯
室内过敏原
读数
气态污染物
读数
甲醛读数
滤网清洁提醒温度/湿度显示 滤网更换提醒Wi-Fi 指示灯
开/关按钮 灯光开/关按钮显示切换按钮 模式切换按钮
自动
劲速
柔风
睡眠
长按显示历史数据
甲醛
气态污染物
过敏原
PM2.5
滤网状态/
重设按钮
自动模式 劲速模式 柔风模式 睡眠模式
如果未安装灵智感应空气传感器或安装不到位，则甲醛、气态污染物和
温湿度读数显示为“---”。
请拨打中国顾客服务热线 4008 800 008 购买灵智感应空气传感器。
禁止使用溶剂、酒精、香水、香薰、油漆、油烟等有机物喷溅传感器
或传感器的安装位置。
小京鱼
打开应用程序，点击“+”连接装置。
请按照应用程序中的步骤操作。
您需要将空气净化器 AC3998 与应用程序连接以控制净化器并检
测空气质量。下载并安装
!
良好 较差 很差一般
Luy_China_EN
90x127mm
When display shows
When display shows
Time to clean the NanoProtect Formaldehyde Pro lter (FY4452)
Time to replace the
NanoProtect Formaldehyde Pro lter
(FY4452)
Press to check lter lifetime status.
!
Press for 3 seconds to reset after cleaning or replacing lter.
3000 055 05652-2
The lter may produce smell after being used for a while because of the absorption of indoor
air. Remove the lter and place it where it has direct sunlight and ventilation for several hours.
Re-install and try using it again. If the odor remains, please replace the lter.
Connectivity
Display
Control
PM2.5
indicator
Air quality
light
Indoor allergen
index
Gas
indicator
Formaldehyde
indicator
Good Poor Very poorFair
Filter cleaning
alert
Temperature/Humidity
display
Filter
replacement
alert
Wi-Fi
indicator
Power Light
on/o
Display
switch
Mode
switch
Auto
Turbo
Gentle
Sleep
Long press to show historical
data
Formaldehyde
Gas
IAI
PM2.5
Filter status/
reset
Installing AeraSense sensor box
Maintenance
PM2.5
1 2 3
Auto mode Turbo mode Gentle mode Sleep mode
The formaldehyde, gas, temparature and humidity readings show “---” if no
AeraSense sensor box is installed or installed improperly.
Please call customer service hotline 4008 800 008 for AeraSense sensor box purchase.
It is prohibited to use organic substances such as solvents, alcohol, perfume, incense,
paint, oil fume to splash the sensor, or the installation position of the sensor.
JD Whale App
Open the app and click “+” to connect your device. Please follow the steps
in the app.
You need to connect your air purier AC3998 with the App to control the
purier and check air quality.
Download and install
!
-
1
-
2
