Wasabi KJ550F-D21 China_EN
90x127mm
When display shows
When display shows
Time to clean the NanoProtect lter Pro S3
Time to replace the NanoProtect lter Pro S3
Press to check lter lifetime status
!
Press for 3 seconds to reset after cleaning or replacing lter
3000 057 03311-2
The lter may produce smell after being used for a while because of the absorption of indoor
air. Remove the lter and place it where it has direct sunlight and ventilation for several hours.
Re-install and try using it again. If the odor remains, please replace the lter.
Connectivity
Auto mode
Display
Control
Turbo mode Sleep mode
PM2.5
indicator
Air quality
light
Indoor allergen
index
Gas
indicator
Good Poor Very poorFair
Allergen index
1-12, 1 indicates
best air quality
Gas index
from L1-L4,
L1 indicates
best air quality
Filter cleaning
alert
Filter replacement
alert
Wi-Fi
indicator
Auto
Turbo
Sleep
PM2.5
Gas
IAI
Maintenance
2
1
PM2.5
IAI Gas
2
PM2.5
IAI
Gas
2
JD Whale App
Open the app and click ‘+’ on the top right of the screen, re-scan the QR code to
connect your device. Please follow the steps in the app.
You can use the app to control the air disinfector and check air quality.
Download and install the Philips app
PM2.5
IAI Gas
2
PM2.5
IAI Gas
2
NanoProtect lter Pro S3 (FY4150/01)
Power button Light on/o
button
Display switch
button
Mode switch
button
Filter status/
reset button