10 30
1 3 (Turret style)
WF10 (20mm Field of View)
100mm
45
Movable Body
Pole Type (䃥32mm)
䃥95mm Black/White Acrylic
55 75mm
5 Diopter
Optional Ring Light (sold separately)
Light Mounting Section : 䃥54 mm
Microscope Mounting Threads : M48 P0.75
L255 W200 H25mm
Approx. 3.6kg
Ring Light Mounting Attachment
Cover
Base
Mounting Threads
Light Mounting Groove
Eyecups
Head
Eyepiece
Sleeve
Head Locking
Knob
Diopter
Adj. Ring
Stage Plate
Turret
Objective Lens
Stage Clips
Focus
Knob
1. Sample Placement 3.
Focus Adjustment Diopter Adjustment
2. Eye Width Adjustment
Securing the Head Position
290 410mm (Range)
25mm
䃥32mm
200mm 255mm
Ring Light
Mounting
Attachment
Ring Light Mounting Attachment
Magnification
Objective Lens
Eyepiece Lens
Working Distance
Eyepiece Angle
Focus Adjustment
Stand
Stage Plate
Eye Width Adj. Range
Diopter Adj. Range
Illumination
Ring Light Mounting
Base Dimensions
Weight
Accessories
STEREO TURRET MICROSCOPE
XTDB
-
SP
2
N
INSTRUCTION MANUAL
Thank you for purchasing the Stereo Turret Microscope.
Please read this manual thoroughly before use to insure proper operation
and long service.
This is a precision instrument – Handle With Care. Use caution to avoid
shock or excessive forces on instrument when in use or transport.
Avoid direct sunlight or areas with high temperatures or high levels of dust.
Keep in location where temperate and humidity are stable.
Keep lens surface clean from dirt and fingerprints.
Clean the lens gently with lens cleaning cloth or soft cotton cloth.
When not in use, store with protective cover, in location that has low
moisture in order to prevent internal mold growth.
SPECIFICATIONS
PART IDENTIFICATION
-
ASSEMBLY
OPERATION
NOTES
Place sample in center of Stage.
If required, use Stage Clips to hold sample in
place.
Hold the Left and Right Side Focus Knobs in
your Left and Right hands.
While holding one Knob, rotate the other in
the direction of the arrow shown on the Knob
for increased TENSION to tighten.
Head position is now secure.
Hold the left and right sleeve in each hand and
look through the eyepieces. Adjust the sleeves
to align the left and right field of view seen
through the eyepieces.
Turn the Turret to select the desired Objective
magnification.
Look through the right Eyepiece with the
right eye and observe the sample. Adjust the
focus using the Focus Knob.
Look through the left eyepiece with the left
eye, and adjust focus using the Diopter
Adjustment Ring.
Niigata Seiki Co., Ltd.
5-3-14, Tsukanome, Sanjo, Niigata, Japan, 955-0055
Tel. : +81-256-33-5522 Fax. : +81-256-33-5518
MAIL intl.sales@niigataseiki.co.jp
URL http://www.niigataseiki.co.jp
䃥
䃥
䃥
䃥
STEREO MICROSCOPE
URL http://www.niigataseiki.co.jp
-
1
-
2
