Magnification
Objective Lens
Eyepiece Lens
Working Distance
Eyepiece Angle
Focus Adjustment
Stand
Stage Plate
Eye Width Adj. Range
Diopter Adj. Range
Illumination
Ring Light Attachment
Dimensions
Base Dimensions
Weight
6.5 451 3 90
0.654.5 (Zoom Ratio 1:7)
WF10 (20 mm Field of View)
WF20 (10 mm Field of View)
95mm
45
Movable Body
Pole Type
φ95 Black/White Acrylic
55 75mm
5 Diopter
Optional Ring Light (sold separately)
Base
Eyecups
Eyepiece
Sleeve
Head
Locking Knob
Up/Down
Locking Knob
Diopter
Adj. Ring
Zoom
Control
Stage
Plate
Stage Clips
Head
Ring Light
Attachment
Focus Knob
350 470mm (Range)
40mm
10mm
φ25mm
170mm 245mm
Mounting Threads
Light Mounting Groove
Attachment
1. Sample Placement
3. Eye Width Adjustment
2. Eyecup Use
4.
Focus Adjustment Diopter Adjustment
Place sample in center of Stage.
If required, use Stage Clips to hold
sample in place.
For use without eyeglasses:
Hold Diopter Adjustment Ring and
rotate Eyepiece to adjust diopter setting.
Align the Eyecups to point toward user
and look through the Eyepiece with
eyes brought close.
For use with eyeglasses:
Remove Eyecups to use.
Hold the left and right sleeve in each hand
and look through the Eyepieces. Adjust the
Sleeves to align the left and right field of
view seen through the Eyepieces.
Rotate the
Zoom Control
for highest magnification.
Look through the right eyepiece with the right
eye and adjust the focus using the Focus Knob.
Rotate the Zoom Knob for lowest magnification.
Using the Right Diopter adjustment, adjust the
focus if required.
Now rotate the Zoom Control back to highest
magnification and check the focus. Repeat
steps 2 to 4 to achieve the highest focus
accuracy.
Rotate the Zoom Control for highest
magnification. Look through the left Eyepiece
with the left eye, and adjust focus using the Left
Diopter Adjustment Ring.
ZOOM STEREO MICROSCOPE
XTS
-
SP
2
Thank you for purchasing the Zoom Stereo Microscope.
Please read this instruction manual thoroughly before use to insure proper
operation and long service.
This is a precision instrument – Handle With Care. Use caution to
avoid shock or excessive forces on instrument when in use or trans-
port.
Avoid direct sunlight or areas with high temperatures or high levels of
dust. Keep in location where temperate and humidity are stable.
Keep lens surface clean from dirt and fingerprints.
Clean the lens gently with lens cleaning cloth or soft cotton cloth.
Do not turn left and right Zoom Controls in opposite directions –
doing so will result in damage to instrument.
When not in use, store with protective cover, in location that has low
moisture in order to prevent internal mold growth.
NOTES
INSTRUCTION MANUAL
SPECIFICATIONS OPERATION
PART IDENTIFICATION
-
ASSEMBLY
Niigata seiki Co., Ltd.
5-3-14, Tsukanome, Sanjo, Niigata, Japan, 955-0055
Tel. : +81-256-33-5522 Fax. : +81-256-33-5518
MAIL [email protected]
URL http://www.niigataseiki.co.jp
L245 W170 H 40 mm
Approx. 5.4kg
Light Mounting Section :φ54 mm
Microscope Mounting Threads : M48P0.75
φ
φ
φ
STEREO MICROSCOPE
URL http://www.niigataseiki.co.jp
/