Basic Operation Basic Operation
Using the Snapshot Button
· Taking photos: Press Camera Button once.
· Taking short videos: Press Video Button once.
EN/15
EN/14
Senior Setting - IR LED Auto
1) When the rear camera is under low light, IR LED will
be turned on automatically. The infrared night vision
mode will be enabled and the screen will display in
black-and-white.
2) Once the IR LED is turned off, the screen will always
display in color.
Firmware Upgrade via Memory Card
1) Download the firmware for the corresponding model
from VAVA web site: https://www.vava.com/c/dash-cam
2) Insert the Micro SD card into PC, then copy the
firmware file into the SD card root.
3) Insert the card back into the Dash Cam, and power it on.
4) A dialog pops up to confirm Firmware Upgrade
automatically. Press OK to start upgrading.
Note:
Do not power off the Dash Cam during the
upgrade.
Please ensure enough power during this
process. Dash Cam will restart automatically
after upgrading.
· Do not operate or remove the card during
the upgrade.
ImportantThe firmware file shall be copied in the
SD card Root.