Kenwood Car Satellite Radio System KCA-R71FM ユーザーマニュアル

KCA-R71FM

Take the time to read through this instruction manual.

Familiarity with installation and operation procedures will help you

obtain the best performance from your digital radio controller.

For your records

Record the serial number, found on the back of the unit, in the spaces desig-

nated on the warranty card, and in the space provided below. Refer to the

model and serial numbers whenever you call upon your KENWOOD dealer for

information or service on the product.

Model KCA-R71FM Serial number

FM MODULATOR SYSTEM

INSTRUCTION MANUAL

SYSTEME A MODULATION DE FREQUENCE

MODE D’EMPLOI

SISTEMA DE MODULADOR FM

MANUAL DE INSTRUCCIONES

FM 調頻系統

使用說明書

04.2.27, 10:49 AMPage 1

— 2 —

English

Contents

Before use

Safety Precautions ........................................................................3

General features

Power............................................................................................5

Switching Modes ..........................................................................5

Sirius satellite radio tuner features

Selecting Sirius Mode...................................................................6

Switching Seek Mode...................................................................6

Selecting the Preset Band ............................................................6

Select the channel ........................................................................7

Channel Preset Memory...............................................................7

Preset Tuning ................................................................................7

Channel Scan ................................................................................7

Channel Search............................................................................7

Direct Access Tuning ....................................................................8

Switching Display..........................................................................8

Disc control features

Playing Disc...................................................................................9

Fast Fowarding and Reversing .....................................................9

Track Search..................................................................................9

Disc Search .................................................................................10

Direct Track Search .....................................................................10

Direct Disc Search ......................................................................10

Track/Disc Repeat .......................................................................10

Track Scan ...................................................................................10

Random Play ...............................................................................10

Magazine Random Play...............................................................11

Folder Search ..............................................................................11

Text/Title Scroll ............................................................................11

Switching Display........................................................................11

Menu system

Menu system..............................................................................12

Changing the Transmission Frequency .......................................13

Modulation level..........................................................................13

Dynamic control ..........................................................................13

Text Scroll....................................................................................13

Sirius ID (ESN).............................................................................14

Basic Operations of remote.............................................15

Installation

Accessories.................................................................................17

Installation Procedure .................................................................17

Connecting Wires to Terminals...................................................18

Installation...................................................................................20

Troubleshooting guide........................................................21

Specifications .........................................................................25

KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 2

Reset button

— 3 —

Take the following precautions to

prevent fire and avoid personal injury:

• When extending the ignition wire, battery

wire, or ground wire, use 0.75mm

2

(AWG18)

or larger automotive grade wire to avoid wire

deterioration or damage to the covering.

• Check that no metal objects (coins, tools,

etc.) are left inside the unit to avoid short

circuits.

• If you smell or see smoke, turn the power

off immediately and consult your Kenwood

dealer.

• Do not touch the liquid crystal fluid if the

LCD is damaged or broken due to shock. The

liquid crystal fluid may be dangerous to your

health or even fatal.

If the liquid crystal fluid from the LCD

contacts your body or clothing, wash it off

with soap immediately.

Take the following precautions to

keep the unit in proper working order.

• Be sure the unit is connected to a 12V DC

power supply with a negative ground

connection.

• Do not open the top or bottom cover.

• Do not install the unit in places it is exposed

to direct sunlight, high heat or humidity,

water may splash over it, or dust exists.

2CAUTION

2WARNING

IMPORTANT INFORMATION

About the disc changer to be

connected:

To connect a disc changer having the "O-N"

switch to this unit, set the "O-N" switch to "N".

Note that none of the KDC-C100, KDC-C302,

C205, C705, and non-Kenwood CD changers

can be connected.

You can damage both your unit and the CD

changer if you connect them incorrectly.

Precautions when connecting disc changers

released in 1997 or earlier.

The optional switching adapter KCA-S210A is

necessary to connect a disc changer that is

not equipped with the "O-N" switch except

KDC-C100, KDC-C302, C205 and C705.

Cleaning the Unit

If the front panel gets dirty, turn off the

power and wipe the panel with a dry silicon

cloth or soft cloth.

Do not use hard cloths or paint thinner,

alcohol, or other volatile solvents. These may

damage external surfaces or remove

indicator characters.

2CAUTION

Safety Precautions

• When replacing a fuse, only use a new one

with the prescribed rating. Using a fuse with

the wrong rating may cause your unit to

malfunction.

•To prevent a short circuit when replacing a

fuse, first disconnect the wiring harness.

• If you have difficulty in installing this unit in

your vehicle, contact your Kenwood dealer.

• If it doesn’t seem to be working properly,

first press the Reset button. If the

malfunction persists, consult your Kenwood

dealer.

• Some car stereos cause the sound of the

tuner to make for a moment when an

engine is activated.

• The reception of the tuner may be reduced

a little if the KCA-R70FM is used.

• If the sound is lower than the tuner sound,

raise up the volume level of the CD/MD

with using the receiver.

• Do not use your own screws. Use only the

screws provided. If you use the wrong

screws, you could damage the unit.

NOTE

KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 3

— 4 —

English

Safety Precautions

FCC WARNING

This equipment may generate or use radio

frequency energy. Changes or modifications

to this equipment may cause harmful

interference unless the modifications are

expressly approved in the instruction manual.

The user could lose the authority to operate

this equipment if an unauthorized change or

modification is made.

This Class B digital apparatus complies with

Canadian ICES-003.

NOTE

KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 4

— 5 —

General features

SRC

Turning ON the Power

Press the [SRC] button.

Turning OFF the Power

Press the [SRC] button for at least 1 seconds.

The FM modulator is turned OFF and the radio can be heard.

• Be sure to turn down the volume whenever you listen to the

radio or a cassette tape after stopping the disc play.

• During the disc play is being conducted, you are not able to

receive ordinary Radio broadcasting because antenna output is

switched into compact disc player‘s side.

Power

Set the car radio FM station to 88.3 MHz. See Page 13 for

more information on changing the transmission frequency.

Press the [SRC] button.

Source required Display

Sirius "SIRIUS"

CD/MD auto-changer "CHANGER"/"CHANGER-1"/

"CHANGER-2"

Auxiliary input "AUX"

Off

For Auxiliary input one of the below optional accessories is

necessary.

- KCA-S210A

- CA-C1AX

- CD changer with an Auxiliary input function installed.

Switching Modes

KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 5

— 6 —

English

Sirius satellite radio tuner features

d

u

4

SRCH

¢

SRC

DISP

# 1-6

SEEK

Band display Channel number

Preset station number

Press the [SRC] button.

Select the "SIRIUS" display.

•You need to subscribe to SIRIUS to receive the service by Sirius

Satellite Radio. Consult SIRIUS if "CALL 888-539 SIRIUS TO

SUBSCRIBE" appears.

• It may take a little time to start receiving after you selected the

SIRIUS source.

• If the signal receiving fails, "ACQUIRING SIGNAL" appears.

Selecting Sirius Mode

Press the [u] button.

Each time the button is pressed the preset band switches

between the SR1,SR2,SR3, and SR4.

Selecting the Preset Band

Sets the seeking mode.

Press the [SEEK] button.

Each time the button is pressed the Seek mode switches as

shown below.

Display Operation

"SEEK 1" Normal manual seeking control.

"SEEK 2" Search in order of the channels in the

Preset memory.

You cannot operate this unit during switching Channel or Category.

Switching Seek Mode

SCAN indicator

KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 6

— 7 —

Putting the channel in the memory.

1 Select the preset band

Press the [u] button.

2 Select the channel to put in the memory

Press the [4] or [¢] button.

3 Put the channel in the memory

Press the [#1] — [#6] button for at least 2 seconds.

The preset number display blinks 1 time.

On each band, 1 channel can be put in the memory on each [#1]

— [#6] button.

Only the channel number is stored. Category information is not

stored.

Channel Preset Memory

Calling up the channels in the memory.

1 Select the preset band

Press the [u] button.

2 Call up the channel

Press the [#1] — [#6] button.

Preset Tuning

A channel is searched within the selected category.

1 Enter Channel Search mode

Press the [SRCH] button.

2 Select the Category

Press the [u] or [d] button.

3 Select the Channel

Press the [4] or [¢] button.

Canceling Channel Search

Press the [SRCH] button.

You cannot operate this unit until all the Category information is

acquired.

Channel Search

Scanning for the channel you want to listen to.

1 Start Channel Scan

Press the [SEEK] button for at least 1 second.

"SCAN" indicator is ON.

2 Release it when the channel you want to listen to is received

Press the [SEEK] button for at least 1 second.

Channel Scan

Selecting the channel.

Press the [4] or [¢] button.

Select the channel

KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 7

— 8 —

English

— 8 —

You can display various kinds of text data transmitted from

broadcasting stations by switching as follows.

Press the [DISP] button.

Each time the button is pressed the display switches as shown

below.

Information Display

Channel Number

Channel Name "CHANNEL"

Song Title "SONG"

Artist Name "ARTIST"

Category Name "CATEGORY"

Album Title "ALBUM"

Switching Display

Entering the channel and tuning.

1 Enter Direct Access Tuning mode

Press the [DIRECT] button on the remote.

2 Enter the channel number

Press the number buttons.

3 Do Channel Search

Press the [4] or [¢] button.

Canceling Direct Access Tuning

Press the [DIRECT] button on the remote.

•If you make no button operation for 10 seconds, the Direct Access

Tuning mode is automatically canceled.

•You can set up to Channel number 223.

• If there is no signal in the input Channel, "NO CHANNEL" appears.

• If you cannot receive any signal in the input Channel due to a bad

condition on radio wave or another problem, "ACQUIRING SIGNAL"

appears.

Direct Access Tuning (Function of remote)

Sirius satellite radio tuner features

KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 8

— 9 —

Disc control features

Play:

Press the [SRC] button.

Select the "CHANGER"/"CHANGER-1"/ "CHANGER-2" display.

Stop the play:

Press the [SRC] button for at least 1 second.

The FM modulator is turned OFF and the radio can be heard.

Pause and play:

Press the [

6](38...Remote) button.

Each time the button is pressed it pauses and plays.

If you press the switch once more, the disc is replayed from

the paused part.

This unit enables control of an MP3-compatible disc auto-changer.

MP3 media formats, refer to the instruction manual of the MP3-

compatible disc auto-changer to be connected.

Playing Disc

Fast Forwarding

Hold down on the [¢] button.

Release your finger to play the disc at that point.

Reversing

Hold down on the [4] button.

Release your finger to play the disc at that point.

Fast Forwarding and Reversing

Searching for a song on the disc or in the MP3 folder.

Press the [4] or [¢] button.

Track Search

d

u

4

6

¢

SRC

DISP

SCN

RDM REP

M.RDM

Track number

Track time

Disc number

Indicator

KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 9

Disc control features

— 10 —

English

Doing Disc Search by entering the disc number.

1 Enter the disc number

Press the number buttons on the remote.

2 Do Disc Search

Press the [+] or [–] button.

Canceling Direct Disc Search

Press the [38] button.

Input "0" to select disc 10.

Direct Disc Search

(Function of disc changers with remote)

Replaying the song, disc in the Disc changer or MP3 folder

you're listening to.

Press the [REP] button.

When it's ON, the "REP" indicator is ON.

Each time the button is pressed the Repeat Play switches as

shown below.

Repeat play Display

Track Repeat Track No. blinks.

Disc Repeat Disc No. blinks.

OFF —

Track/Disc Repeat

Play all the songs on the disc or MP3 folder in random order.

Press the [RDM] button.

Each time the button is pressed Random Play turns ON or OFF.

When it's ON, the "RDM" indicator is ON and the track number

blinks.

When the [¢] button is pressed, the next song select starts.

Random Play

Playing the first part of each song on the disc or MP3 folder you

are listening to and searching for the song you want to listen to.

1 Start Track Scan

Press the [SCN] button.

"SCAN" indicator is ON.

2 Release it when the song you want to listen to is played

Press the [SCN] button.

Track Scan

Doing Track Search by entering the track number.

1 Enter the track number

Press the number buttons on the remote.

2 Do Track Search

Press the [T.UP] or [T.DOWN] button.

Canceling Direct Track Search

Press the [38] button.

Direct Track Search (Function of remote)

Selecting the disc set in the Disc changer.

Press the [u] or [d] button.

Disc Search

KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 10

Scrolling the displayed CD text, or MD title.

Press the [DISP] button for at least 1 second.

Text/Title Scroll

Selecting the folder you want to listen to.

1 Enter Folder Search mode

Press the [6] (38...Remote) button.

File No. display changes to Folder No. display during the Folder

Search mode.

2 Select the folder

Press the [u] or [d] button.

With the [d] button you move to the previous folder, and with

the [u] button to the next folder.

3 Decide the folder to play

Press the [6] (38...Remote)

button.

The Folder Search mode releases, and the MP3 in the folder

being displayed is played.

Folder Search (Function of MP3)

— 11 —

Play the songs on all the discs in the disc changer in random

order.

Press the [M.RDM] button.

Each time the button is pressed the Magazine Random Play turns

ON or OFF.

When it's ON, the "RDM" indicator is ON and the track and disc

number blink.

When the [¢] button is pressed, the next song select starts.

Magazine Random Play

(Function of disc changer)

Switching the information displayed.

Press the [DISP] button.

Each time the button is pressed the display switches as shown

below.

Information Display

P-Time

Disc title "DISC TITLE"

Track title "TRACK TITLE"

Switching Display

KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 11

— 12 —

English

Menu system

The Menu system basic operation method is explained here. The

reference for the Menu items and their setting content is after

this operation explanation.

1 Enter Menu mode

Press the [MENU] button for at least 1 second.

"MENU" is displayed.

2 Select the menu item

Press the [u] or [d] button.

3 Set the menu item

Press the [4] or [¢] button.

You can continue by returning to step 2 and setting other items.

4 Exit Menu mode

Press the [MENU] button.

When other items that are applicable to the basic operation method

above are displayed afterwards their setting content chart is

entered.

Menu System

d

u

¢

4

MENU

KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 12

— 13 —

Select the frequency.

Display Value

"T-FREQ 87.7" 87.7 MHz

"T-FREQ 87.9" 87.9 MHz

"T-FREQ 88.1" 88.1 MHz

"T-FREQ 88.3" 88.3 MHz (Initial setting)

"T-FREQ 88.5" 88.5 MHz

"T-FREQ 88.7" 88.7 MHz

"T-FREQ 88.9" 88.9 MHz

"T-FREQ 89.1" 89.1 MHz

"T-FREQ 89.3" 89.3 MHz

"T-FREQ 89.5" 89.5 MHz

"T-FREQ 89.7" 89.7 MHz

"T-FREQ 89.9" 89.9 MHz

Some car radios cannot receive a 87.7 MHz frequency.

Changing the Transmission Frequency

Select the modulation level.

Display

"MOD LEVEL 1"

"MOD LEVEL 2" (Initial setting)

"MOD LEVEL 3"

"MOD LEVEL 4"

Modulation level

Setting the Dynamic control.

Display Setting

"D-CONT ON" The dynamic control is ON.

"D-CONT OFF" The dynamic control is OFF. (Initial setting)

The unit comes with the prevention of distortion function to

reduce sound distortion.

If the sound is distorted severely, press the [4]or[¢] button

on the display unit and then set the function to "ON". If the

prevention of distortion function is set to "ON", the sound

extension is reduced.

If a disc with a high recording level is used, the sound may distort

even if the prevention of distortion function is set to "ON". In this

case, reduce the modulation level.

Dynamic control

Setting the displayed text scroll.

Display Setting

"SCROLL MANU" Doesn't scroll.

"SCROLL AUTO" Scrolls when the display changes.

The texts scrolled are shown below.

• CD text

• Song title/ Artist name/ Album title/ Category name

• MD title

Text Scroll

KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 13

— 14 —

English

Sirius ID (Electronic Serial Number) is displayed.

Sirius ID (ESN)

Menu system

KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 14

— 15 —

SRC

M.RDM

DIRECT

SCAN

T.

DOWN

T.

UP

D.REP

REP

RDM

DISC

+

—

38

CH-SEARCH

Basic Operations of remote

[SRC] button

Each time the button is pressed the source switches.

Basic operations

Use two "AA" batteries.

Slide the cover while pressing downwards to remove it as

illustrated.

Insert the batteries with the + and

–

poles aligned properly,

following the illustration inside the case.

Store unused batteries out of the reach of children. Contact a doctor

immediately if the battery is accidentally swallowed.

• The provided batteries are intended for use in operation

checking, and their service life may be short.

• When the remote controllable distance becomes short, replace

both of the batteries with new ones.

•A portion of the operations may not be possible, depending on

the unit that is connected.

Do not set the remote on hot places such as above the dashboard.

2WARNING

Loading and Replacing the battery

KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 15

— 16 —

English

[T.UP]/ [T.DOWN] buttons

Doing track forward and backward.

[+]/ [–] buttons

Doing disc forward and backward.

[38] button

Each time the button is pressed the song pauses and plays.

[REP] button

Each time the button is pressed Track Repeat function turns ON

or OFF.

[D.REP] button

Each time the button is pressed Disc Repeat function turns ON

or OFF.

[RDM] button

Each time the button is pressed Random Play turns ON or OFF.

[M.RDM] button

Each time the button is pressed Magazine Random function

turns ON or OFF.

[SCAN] button

Each time the button is pressed Trak Scan function turns ON or

OFF.

[0] — [9] buttons

When in <Direct Track Search> (page 10) and <Direct Disc

Search> (page 10), enter the track/disc number.

In Disc source

[+] buttons

Select the band.

Each time the [+] button is pressed it switches between the

SR1, SR2, SR3, and SR4 bands.

[T.UP]/ [T.DOWN] buttons

Tune up or down the channels.

[0] — [9] buttons

Press buttons [#1] — [#6] to recall preset channels.

[DIRECT] button

Enters and cancels the <Direct Access Tuning> (page 8) mode.

[CH SEARCH] button

Enters and cancels the <Channel Search> (page 7) mode.

In Sirius source

Basic Operations of remote

KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 16

1. To prevent a short circuit, remove the key from the ignition and

disconnect the - battery.

2. Make the proper input and output wire connections for each unit.

3. Connect the wiring harness wires in the following order: ground,

battery, ignition.

4. Install the unit in your car.

5. Reconnect the - battery.

6. Press the reset button.

When drilling a hole in the car chassis to install the unit, check

first that nothing is on the other side.

• If the fuse blows, first make sure the wires aren’t touching to

cause a short circuit, then replace the old fuse with one with

the same rating.

• Do not let unconnected wires or terminals touch metal on the

car or anything else conducting electricity. To prevent a short

circuit, do not remove the caps on the ends of the

unconnected wires or the terminals.

• After the unit is installed, check whether the brake lamps,

blinkers, wipers, etc. on the car are working properly.

• Insulate unconnected wires with vinyl tape or other similar

material.

• Some disc changers require optional equipment for connection.

See the section on "Safety Precautions" for details.

2CAUTION

2WARNING

Accessories Installation Procedure

External view Number of items

................................................1

2

................................................2

1

................................................1

3

The use of any accessories except for those provided might result in

damage to the unit. Make sure only to use the accessories shipped with

the unit, as shown above.

— 17 —

KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 17

English

— 18 —

Connecting Wires to Terminals

To prevent fire when the ignition wire (Red) or battery wire

(Yellow) is short-circuited by coming into contact with the

vehicle chassis (ground), only connect the power supply after

making the fuse box connections.

Be sure to press the reset button after installation.

2CAUTION

2WARNING

Do not install an antenna of radio equipment or

distribute the antenna wire near the changer output

wire, for this could cause malfunction with this unit.

Control output

Control input

Changer connection wire

FM modulator unit

Ground wire (Black) - (To car chassis)

Car fuse box

ACC

Ignition key

switch

Output

Battery

Display unit

Battery wire + (Yellow)

Ignition wire

+ (Red)

CD/MD auto - changer input

CD/MD auto-changer / Sirius satellite radio tuner

O-N selection switch

"N"

FM/AM

antenna input

Or

Audio Right output

Audio Left output

FM/AM

antenna output

Antenna plug for

automobile

Car stereo

with FM tuner

KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 18

SWITCH

AUX

OFF ON

SWITCH

PROTOCOL

ON

IN

AUX

] N

Control output

Control input

CD/MD auto-changer

Changer connection wire

FM modulator unit

Output

Display unit

CD/MD auto - changer input

• Set the PROTOCOL selection switch to the "N" position.

• Up to two units of the Sirius satellite radio tuner unit or

disc autochanger can be connected at the same time.

KCA-S210A

Sirius satellite

radio tuner unit

Connection wire

If you want to connect disc changers released in 1997 or earlier

■

"TO CHANGER"

"TO HEAD UNIT"

"TO HU"

"TO CHANGER1"

— 19 —

"TO CHANGER2"

KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 19

English

— 20 —

Installation

Installation of Display unit

■

• Installation without using the trim mount plate 3

Attach one strip of Velcro to the

slanted-line of the display units

as shown to the left, and attach

the other strip of Velcro to the

parts where you wish to attach

the display units.

Then, put velcros together and

install the display units.

• Installation using the trim mount plate 3

Display unit

2

3

Pass the wire from the display unit through the hole on the

trim mount plate and push fit the display unit into the trim

mount plate until it locks.

• Be sure not to place the unit on such place as where it is

exposed to direct sunlight and temperature eventually rises.

It results in the deformation of the case.

• Depending on the installing location, the display unit may

not be able to receive the signals from the controller unit.

Install them after confirming that the signals can be

received.

• Install the unit in such a way that it does not disturb driving.

2CAUTION

Installation of FM modulator unit

■

Install the FM modulator unit beneath the front seat using

Metal fixture and Bind head screw as shown in the above

figure.

Take sufficient care so

that the wires are not

caught under the seat.

If they are caught, they

may break.

2CAUTION

1

KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 20

ページが読み込まれています...

Kenwood Car Satellite Radio System KCA-R71FM ユーザーマニュアル

このマニュアルも適しています

Kenwood Car Satellite Radio System KCA-R71FM ユーザーマニュアル

他の言語で

関連論文

その他のドキュメント