512 AUDIO 512-LLT ユーザーガイド

LIMELIGHT USER GUIDE

DYNAMIC BROADCAST MICROPHONE

EN | FR | DE | ES | 中文 | 日本語

TABLE OF CONTENTS

English ............................................................................... 3

French ............................................................................. 15

Deutsch ............................................................................ 27

Español ............................................................................ 39

中文 ............................................................................... 51

日本語 ............................................................................ 63

EN | 3

WELCOME TO LIMELIGHT

A DYNAMIC MICROPHONE FROM 512 AUDIO

Whether you’re Podcasting, Broadcasting, Streaming, Gaming or Recording,

the new Limelight dynamic microphone is your key to studio quality sound – no

engineering degree needed.

Designed by engineers with a deep passion for audio, Limelight is easy to use,

built like a tank, and ready to help you bring your voice to the world.

So let’s get started.

4 | EN

HAVE YOU MET MIC?

Limelight is an end-address microphone, which simply means

that you’ll point the business end of the microphone at the

sound you’re looking to capture.

At the other end, you’ll ﬁnd the XLR connector which allows

you to use a standard 3-pin microphone cable to connect

Limelight to your audio mixer, interface or portable recorder.

EN | 5

HAVE YOU MET MIC?

You’ll also ﬁnd a small switch to control the built-in High

Pass Filter on the bottom of the mic. This clever little toggle

will allow you to cut out unwanted boominess and rumble (if

needed) without having to “Fix It In the Mix” later with EQ.

6 | EN

IS THIS A SETUP?

Limelight includes an adjustable swivel mount to easily

position the microphone exactly where you want it. Simply

attach the mount to your microphone stand or boom arm, slip

Limelight into the mount and use the tightening knob to get

everything nice and snug. Be sure not to over-tighten! Use an

XLR microphone cable to connect to your mixer, interface or

portable recorder and you’re good to go.

EN | 7

Limelight is a Dynamic Microphone with a Hypercardioid

pickup pattern – that means it will primarily “listen” to what

it’s pointed at and will largely ignore sounds off to one side

or the other. This is a great feature for Podcasters working

in the same room with a co-host where each microphone

should ideally only pick up one voice. In this case, we

suggest placing the microphone 6 – 8 inches from the

speaker, pointed at his or her mouth.

CHECK ONE. CHECK TWO.

Now that you’re up and running, let’s take a few moments to talk about how to get the

best out of your new microphone. Here are a few tips to help you sound your best:

LOCATION, LOCATION, LOCATION

8 | EN

CHECK ONE. CHECK TWO. (CONTINUED)

EX-ING YOUR PLOSIVES

Are you worried about popping Ps and tapping Ts? Voiceover pros often use a

pop ﬁlter in front of the microphone to take care of unwanted popping sounds,

and it remains the most foolproof way to handle these noises. 512 Audio makes

an affordable pop ﬁlter for just that purpose, which is available wherever 512

products are sold.

EN | 9

CHECK ONE. CHECK TWO. (CONTINUED)

Pro Tip

If you don’t have a pop ﬁlter available, you can still minimize popping

sounds with a little bit of experimentation. As an exercise, place your hand

in front of your face and say the word “pop” over and over. Now move your

hand slowly side to side as you speak. While your dog may think you’re

losing your mind, you’ll quickly notice that you only feel the puffs of air when

your hand is directly in front of your mouth. Simply move the microphone up

or to the side - while still pointing it at your mouth - and you’re good to go.

10 | EN

CHECK ONE. CHECK TWO. (CONTINUED)

A wonderful bonus of dynamic microphone design is

known as the “Proximity Effect.” Not to be confused with a

restraining order, the Proximity Effect describes a pleasing

boost in the bass or low end of the sound as you move closer

to the microphone. This can add a sense of intimacy to a

voice and it’s a great way to release your inner FM Disc

Jockey.

I’M READY FOR MY CLOSEUP

EN | 11

CHECK ONE. CHECK TWO. (CONTINUED)

Not to be confused with volume, the Gain setting on your

mixer, interface or portable recorder can ensure that you’re

creating the absolute best – and noise free – signal possible.

This magical knob controls how sensitive the microphone

is and has a dramatic effect on the quality of the sound

that you’ll get. Set it too low, and no one will ever hear a

word you’re saying. Set it too high and the microphone will

pick up everything from the echo in your room to the air

conditioning, your noisy chair, your loud neighbors and the

voices in your head. Either way, it’s not ideal. So grab the

gain knob, speak and listen. As you turn the gain down,

GAIN THE ADVANTAGE

12 | EN

CHECK ONE. CHECK TWO. (CONTINUED)

move the microphone closer to your mouth – the volume will stay the same but the

sound will dramatically improve. Once you ﬁnd your happy medium you’ll be on

your way.

So take a few minutes and experiment with microphone Direction, Distance and

Gain. You are your voice and Limelight can help you sound your best.

EN | 13

SPECS AND TECH

Capsule Type Dynamic

Capsule Size 28mm

Polar Pattern Hypercardioid

Frequency Range 50Hz – 15kHz

High Pass Filter 100Hz (12dB per octave)

Sensitivity -54dB 13dB (0dB =1V/Pa at 1kHz)

Impedance 600 ohm

Max SPL 138dB

Weight 350g

Dimensions 167.5 x 60.8mm

Included Accessories Adjustable swivel mount & Protective carry bag

14 | EN

WARRANTY STATEMENT

512 Audio warranties this product to be free from defect in materials and workmanship for one year from the date of

purchase, for the original purchaser to whom this equipment is registered. This warranty is non-transferable.

This warranty is void in the event of damage incurred from unauthorized service to this unit, or from electrical or

mechanical modiﬁcation. This warranty does not cover damage resulting from abuse, accidental damage, misuse,

improper electrical conditions such as mis-wiring, incorrect voltage or frequency, unstable power, disconnection

from earth ground (for products requiring a 3 pin, grounded power cable), or from exposure to hostile environmental

conditions such as moisture, humidity, smoke, ﬁre, sand or other debris, and extreme temperatures.

512 Audio will, at its sole discretion, repair or replace this product in a timely manner. This limited warranty extends

only to products determined to be defective and does not cover incidental costs such as equipment rental, loss of

revenue, etc. Please visit us at www.512audio.com for more information on your warranty, or to request warranty

service.

This warranty applies to products sold in the United States of America. For warranty information in any other country,

please refer to your local 512 Audio distributor. This warranty provides speciﬁc legal rights, which may vary from

state to state. Depending on the state in which you live, you may have rights in addition to those covered in this

statement. Please refer to your state laws or see your local 512 Audio retailer for more information.

FR | 15

DÉCOUVREZ LE LIMELIGHT

UN MICROPHONE DYNAMIQUE DE 512 AUDIO

Que ce soit pour des podcasts, de la radio, du streaming, du gaming ou de

l'enregistrement, le nouveau micro dynamique Limelight vous fera proﬁter d'un son

de qualité studio sans devoir passer un diplôme d'ingénieur!

Conçu par des ingénieurs passionnés par l'audio, le Limelight est facile à utiliser,

construit comme un char d'assaut et prêt à vous aider à faire entendre votre voix

dans le monde.

Nous pouvons commencer.

16 | FR

VOUS AVEZ FAIT CONNAISSANCE AVEC VOTRE MICRO?

Le Limelight est un microphone à prise frontale, ce qui signiﬁe

simplement que vous pointerez l'extrémité fonctionnelle du

microphone vers le son que vous cherchez à capter.

À l'autre extrémité, vous trouverez le connecteur XLR qui vous

permet d'utiliser un câble microphone standard à 3-broches

pour connecter le Limelight à votre table de mixage, votre

interface audio ou votre enregistreur portable.

FR | 17

VOUS AVEZ FAIT CONNAISSANCE AVEC VOTRE MICRO?

Vous trouverez également un petit interrupteur dans le

bas du micro pour contrôler le ﬁltre passe-haut intégré.

Ce petit interrupteur pratique vous permettra d'éliminer

les grondements et les bourdonnements indésirables (si

nécessaire) sans avoir à régler le problème au mixage plus

tard avec un égaliseur.

18 | FR

BIEN INSTALLÉ?

Le Limelight comprend un support pivotant réglable qui

permet de positionner facilement le microphone exactement

comme vous le souhaitez. Il sufﬁt de ﬁxer le support à votre

pied ou perche de micro, de glisser le Limelight dans le

support et d'utiliser le bouton de serrage pour que tout soit

bien ajusté. Veillez à ne pas trop serrer! Utilisez un câble

de microphone XLR pour vous connecter à votre table de

mixage, votre interface ou votre enregistreur portable et vous

pouvez y aller.

FR | 19

Le Limelight est un microphone dynamique doté d'une

directivité hypercardioïde*, ce qui signiﬁe qu'il «écoute»

principalement ce vers quoi il est pointé, et ignore en grande

partie les sons provenant d'un côté ou de l'autre. C'est une

fonction très utile pour les podcasteurs travaillant dans la

même pièce avec un co-animateur, où chaque microphone

ne devrait idéalement capter qu'une seule voix. Dans ce cas,

nous suggérons de placer le microphone à une distance de

15 à 20centimètres de l'animateur, pointé vers sa bouche.

TEST, UN, DEUX. TEST MICRO.

Maintenant que vous êtes opérationnel, prenons quelques instants pour parler

de la manière de proﬁter au mieux de votre nouveau microphone. Voici quelques

conseils pour vous aider à obtenir le meilleur son possible:

L'EMPLACEMENT AVANT TOUT

20 | FR

TEST, UN, DEUX. TEST MICRO.

DÉBARRASSEZ-VOUS DE VOS PLOSIVES

Vous avez peur de faire des P et des T? Les professionnels de la voix-off utilisent

souvent un ﬁltre anti-pop devant le microphone pour éliminer les bruits de

«pop» indésirables, et cela reste le moyen le plus infaillible de gérer ces bruits.

512 Audio propose un ﬁltre anti-pop abordable à cet effet et qui est disponible

partout où sont vendus les produits 512.

ページを読み込んでいます...

512 AUDIO 512-LLT ユーザーガイド

関連論文

その他の書類