Motherboard Components
1 2 3 4
5
6
7
9
8
10
11
12
13
14
15
17 1618
19
202122232425
26
27
28
29
30
31
32
33
34
35 36
38 37 No. Code Descripon
1 USB3_LAN1 LAN port #1 (top/server management LAN port)
/ USB 3.0 ports (boom)
2 USB2_LAN2 LAN port #2 (top) / USB 2.0 ports (boom)
3 VGA VGA port
4 COM1 Serial port
5 BUZZER Buzzer
6 PMBUS PMBus connector
7 P2 8 pin power connector (for CPU)
8 DIMM_P0_B1 Channel 2 slot 1
9 DIMM_P0_B0 Channel 2 slot 0
10 DIMM_P0_A1 Channel 1 slot 1
11 DIMM_P0_A0 Channel 1 slot 0
12 BIOS_RCVR BIOS recovery jumper
1-2 Close: Normal operaon. (Default seng)
2-3 Close: BIOS recovery mode.
13 ME_RCVR ME recovry jumper
1-2 Close: Normal operaon. (Default seng)
2-3 Close: ME recovery mode.
14 CASE_OPEN Case open intrusion alert header
15 P1 24 pin main power connector
16 CPU0_FAN CPU fan connector
17 CPU0 Intel LGA1151 Socket H4
18 BAT Baery socket
19 CLR_CMOS Clear CMOS jumper
20 BIOS_PWD Clearing Supervisor Password jumper
1-2 Close: Normal operaon. (Default seng)
2-3 Close: Skip supervisor password.
21 SATA_0_1 SATA 3 6Gb/s connectors
22 SATA_2_3 SATA 3 6Gb/s connectors
23 SATA_DOM4 SATA port 4 DOM power connector
24 SATA4/SATA5 SATA 3 6Gb/s connectors (Supports SATA DOM) header
25 SATA_DOM5 SATA port 5 DOM power connector
26 USB_A1 Type A USB 2.0 connector
27 F_USB3 USB 3.0 header
28 F_USB2 USB 2.0 header
29 FP_1 Front panel header
30 IPMB IPMB connector
No. Code Descripon
31 M2_MKEY M.2 slot (Dimension: 2280)
32 TPM TPM module connector
33 BP_1 HDD back plane board header
34 COM2 Serial port cable connector
35 PCIE_1 PCI Express x8 slot
36 PCIE_2 PCI Express x16 slot
37 ME_UPDATE ME update jumper
38 S3_MASK S3 Power On Select jumper
1-2 Close: Stop an inial power on when BMC is not ready.
2-3 Close: Keep inial power on. (Default seng)
System Components
No Descripon
1 HDD bays
2 System fan #14 (FAN14)
3 System fan #12 (FAN12)
4 System fan #8 (FAN8)
5 System fan #6 (FAN6)
6 System fan #4 (FAN4)
7 CPU heat sink
8 Memory slots
9 PCIe riser bracket
10 Power supply cage
CAUTION!
To connect system fan connector, follow the instrucon:
Blue/Red cable connect to odd numbered connector.
White/Amber cable connect to even numbered connector.
CAUTION!
Before you remove or install the system
cover:
Make sure the system is not turned on
or connected to AC power.
注意！
在卸下或安装系统机盖之前，请注意
下列事项：
确保系统未开启且未连接到交流电源。
注意！
蓝/红电缆连连接于单数风扇插座。
白/橘电缆连连接于双数风扇插座。
1
2
34
56
7
9
810
Front Panel Header
No. Pin Define
1 Power LED+
3 No Pin
5 Power LED-
7 HDD LED+
9 HDD LED-
11 Power Buon
13 GND
15 Reset Buon+
17 GND
19 ID Switch+
21 ID Switch-
23 NMI Switch-
No. Pin Define
2 5V Standby
4 ID LED+
6 ID LED-
8 System Front Board LED+
10 System Status LED-
12 LAN1 Acve LED+
14 LAN1 Link LED-
16 SMBus Data
18 SMBus Clock
20 Case Open
22 LAN2 Acve LED
24 LAN2 Link LED-
1
2423
2
HDD Back Plane Board Header
1 2
25 26
No. Pin Define
1 BP_SGP_CLK
3 BP_SGP_GLD
5 BP_SGP_DOUT
7 Key Pin
9 GND
11 BP_LED_G_N
13 BP_SGP_DIN
15 GND
17 GND
19 P_3V3_AUX
21 P_3V3_AUX
23 GND
25 BP_PRESENSE
No. Pin Define
2 No Connect
4 FAN_SGP_Gate
6 GND
8 Reset
10 BP_LED_A_N
12 GND
14 No Connect
16 SMB_BP_DATA
18 SMB_BP_CLK
20 BMC_ACK
22 BMC_REQ
24 Key Pin
26 GND
System Cover
1
1
2
1
1
Fan Duct
1
2
Heat Sink
1
2
3
Memory Populaon Configuraon
Type
Ranks Per
DIMM and
Data Width
Speed (MT/s);
Slot Per Channel (SPC) and
DIMM Per Channel (DPC)
UDIMM
Unbuffered
DDR4 ECC
UDIMM
Unbuffered
DDR4 non-ECC
SR 1.2V
1.2V
2133 2133
Supported
Voltage
DR 2133 2133
2 Slot Per Channel
1DPC 2DPC
All channels in system run at the fastest common frequency.
Mixing ECC and non-ECC UDIMMs anywhere on the plaorm is not
supported.
1 and 2 DPC is supported at 2133MHz.
所有通道模式以最快的频率速度运行。
此主板不支持ECC与非ECC内存模组混合使用。
1 2 DPC 2133MHz。
System Fan
CAUTION!
Before you remove or install the system fan:
Make sure the system is not turned on or
connected to the AC power.
Disconnect all necessary cable connecons.
Failure to observe these
warnings could result in personal injury or
damage to the equipment.
注意！
确保系统未开机且未连接到交流电源。
断开所有必要的线缆连接。若不遵循这些
警告，可能造成人员伤害或设备损坏。
21
No Descripon
1 HDD#3
2 HDD#2
3 HDD#1
4 HDD#0
5 SGPIO header
6 Fan connector#13
7 Fan connector#14
8 Fan connector#11
9 Fan connector#12
10 ODD power connector
11 Fan connector#9
HDD Backplane Board Components
No Descripon
12 Fan connector#10
13 Fan connector#7
14 Fan connector#8
15 Fan connector#5
16 Fan connector#6
17 Fan connector#3
18 Fan connector#4
19 Fan connector#1
20 Fan connector#2
21 Fan connector#15
22 Fan connector#16
Hard Disk Drive and Back Plane Board
3
44
1
2
5
1
234
6 7 8 9
10
11 12 13 14 15 16 17 18 19 20 21 22
System Front View
System Rear View
No Descripon
1 USB 3.0 ports
2 ID buon with LED
3 Power buon with LED
4 HDD bays
No Descripon
1 Power supply module cord socket
2 Power supply fan
3 Serial port
4 VGA port
5 USB 2.0 ports
6 GbE LAN port
7 10/100/1000 Server management LAN port
8 USB 3.0 ports
9 Low-profle riser card bay
Front & Rear
Power buon/LED:
Green On
Off
Description
System is powered on
System is powered off
State
34 5 6 7 8 91 2
Speed LED Link/Acvity
LED
Off
State Description
Yellow On 1Gbps data rate
Green On 100Mbps data rate
10Mbps data rate
10/100/1000 LAN LED:
4
2 31
PCI Express Card
3
4
5
注意！
在安装扩展卡前，请注意下列事项：
确保系统未开启且未连接到交流电源。
CAUTION!
Before you remove or install the PCI express card:
Make sure the system is not turned on or connected to AC power.
7
6
注意！
在替换或安装电源前，请注意下列事项：
确保系统未开启且未连接到交流电源。
CAUTION!
Before you remove or install the power supplies:
Make sure the system is not turned on or connected to AC power.
Power Supply
1
4
3
4
2
Rail Kit
Release
Lock out
⯮ⅎ庳⎽⇡
Release and detach the inner member from the slide
1
M4X6
Click
Aach the unit to the inner member
⯭Ⅼ彏擨ᷱ㜡⏗
2
Release
lock in
Insert the unit to complete the installaon
墬⅌㜡㞝
4
Bracket
M6X13
M6-NUT
Fix the outer member/bracket assembly to the frame
⯭⣽彏㈿㞝擨⅌㜡㞝
3
Front Panel LED and Buons
34
2347 56 1
7复位按钮 按此按钮启动系统。
3按下按钮启动系统识别功能。ID按钮
3系统处于开机状态。
系统处于ACPI S1状态（睡眠模式）。。
系统未开机或处于ACPIS5状态（关机状态）。
系统处于ACPI S4状态（休眠模式）。
电源按钮和LED 绿色
绿色
恒亮
不亮
闪烁
无亮灯
1/6 恒亮
不亮
闪烁
系统和网络之间的链接
网络访问
断开连接/待机
绿色
绿色
无亮灯
LAN3/LAN4活动LED
LAN1/LAN2活动LED
6硬盘驱动器定位
硬盘驱动器访问
硬盘驱动器访问
硬盘故障
无硬盘驱动器访问
绿色
橙色
绿色/橙色
不亮
亮
亮
闪烁
无亮灯
硬盘驱动器LED
闪烁
编号 名称 颜色 状态 说明
4。
橙色
绿色
系统状态LED 恒亮
恒亮
不亮
不亮
闪烁
无亮灯
效能降低情形，可能为下列状况：
处理器问题
内存问题
严重情形，可能为下列状况：
电源模块故障
系统风扇故障
电源电压问题
系统温度/电压问题
非严重情形，可能为下列状况：
冗余电源模块故障
系统温度/电压问题
机箱侵入
系统未正常运行，可能为下列状况：
POST错误
NMI错误
处理器或终结器缺失
No. Name Color Status Description
7Reset Button Press the button to reset the system.
3 Press the button to activate system identifcation.ID Button
2 System is powered on.
System is in ACPI S1 state (sleep mode).
System is not powered on or in ACPI S5 state (power off).
System is in ACPI S4 state (hibernate mode).
Power Button and LED Green
Green
Solid On
Off
Blink
N/A
5HDD locate
HDD access
HDD access
HDD fault
No HDD access or no HDD fault.
Green
Amber
Green/Amber
On
Off
Blink
On
Blink
N/A
HDD Status LED
1/6 Link between system and network or no access.
Data transmission or receiving is occurring.
No data transmission or receiving is occurring.
Solid On
Off
Blink
Green
Green
N/A
LAN3/4 Active/Link LEDs
LAN1/2 Active/Link LEDs
颜色 状态
4 System is operating normally.
Degrade condition, may indicates:
CPU failure
DIMM killed
System Status LED
Green
Amber
Solid On
Critical condition, may indicates:
Power module failure
System fan failure
Power supply voltage issue
System temperature
Solid On
Non-critical condition, may indicates:
Redundant power module failure
Temperature and voltage issue
Chassis intrusion
System is not ready, may indicates:
POST error
NMI error
Processor or terminator missing
Blink
N/A N/A
Off
1
2
R121-X30 Quick Installaon Guide/R121-X30 快速安装手册
Regulatory Noces Connect With Us
WEEE Symbol Statement For more informaon, visit our website at:
hp://b2b.gigabyte.com
You are a professional?
Get access to our complete source of sales & markeng materials at:
hp://reseller.b2b.gigabyte.com
Join our server forum to discuss our products and get technical assistance at:
hp://forum.b2b.gigabyte.com
hps://www.facebook.com/gigabyteserver
The symbol shown below is on the product or on its packaging, which indicates that this product must not be disposed of with other
waste. Instead, the device should be taken to the waste collecon centers for acvaon of the treatment, collecon, recycling and
disposal procedure. The separate collecon and recycling of your waste equipment at the me of disposal will help to conserve
natural resources and ensure that it is recycled in a manner that protects human health and the environment.
For more informaon about where you can drop off your waste equipment for recycling, please contact your local government
office, your household waste disposal service or where you purchased the product for details of environmentally safe recycling.
When your electrical or electronic equipment is no longer useful to you, "take it back" to your local or regional waste
collecon administraon for recycling.
If you need further assistance in recycling, reusing in your "end of life" product, you may contact us at the Customer Care
number listed in your product's user's manual and we will be glad to help you with your effort.
GIGABYTE产品未故意添加和使用有害物质（Cd、Pb、Hg、Cr+6、PBDE和PBB）。所有部件和元件均经过严格挑选，符合RoHS要求。此
外，我们GIGABYTE一直致力于开发不使用国际上禁止的有毒化学品的产品。
GIGABYTE products have not intended to add and safe from hazardous substances (Cd, Pb, Hg, Cr+6, PBDE and PBB). The parts and components
have been carefully selected to meet RoHS requirement. Moreover, we at GIGABYTE are connuing our efforts to develop products that do not use
internaonally banned toxic chemicals.
Restricon of Hazardous Substances (RoHS) Direcve Statement
限制使用有害物质 (RoHS) 指令声明
California Proposion 65 Warning
WARNING:
This product contains a chemicals , including lead, known to the State of California to cause cancer and birth defects or other reproducve harm.
For more informaon, please visit: hp://www.p65warnings.ca.gov/
Baery Warning:
Incorrectly installing a baery or using incompable baery may increase the risk of ifre explosion. Replace the baery only with
the same or equivalent type.
Do not disassemble, crush, punchture baeries.
Do not store or place your baery pack next to or in a heat source such as a fire, heatgenerang appliance, can or exhaust
vent. Heang baery cells to temperatures above 65oC (149oF) can cause explosion or fire.
Do not aempt to open or service baeries. Do not dispose of baeries in a fire or with household waste.
电池警告：
电池安装不当或使用不兼容的电池会增加火灾爆炸风险。更换电池时，只可使用相同或同等类型的电池。
请勿拆解、挤压、刺破电池。
请勿将电池存放或放置在热源中或旁边，如火源、产生热的设备、罐体或排气口。电池温度升至65oC (149oF)以上
可能导致爆炸或火灾。
请勿尝试打开或维修电池。电池废弃时，请勿投入火中或者作为家庭废弃物进行处理。
依照中华人民共和国的有毒有害物质的限制要求(China RoHS)提供以下的表格：
中华人民共和国电子信息产品中有毒有害物质或元素的名称及含量标识格式
-
1
-
2
