使用本产品之前，请仔细阅读本用户手册
保留备用
4213.354.3669.4
© 2016 Koninklijke Philips N.V.
保留所有权利
SCF356
User manual
用户手册
2 3 4 5
6
7 8 9
10 11 12 13
14 15 16 17
18 19 20 21
22 23 24 25
26
1
SCF356
ENGLISH 6
繁體中文 17
简体中文
26
6
General description (Fig. 1)
1 Baby bottle warmer
2 Progress indicator
3 Settings and on/off knob
4 Defrost setting
5 Milk warming setting 1
6 Milk warming setting 2
7 Milk warming setting 3
8 Baby food warming setting
9 On/off button
Important
To fully benet from the support that Philips offers, register your
appliance at www.philips.com/welcome.
Read this user manual carefully before you use the baby bottle warmer
and save it for future reference.
Danger
- Never immerse the appliance in water or any other liquid, nor rinse it
under the tap.
Warning
- Only use the appliance indoors.
- This appliances can be used by persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
- Cleaning and user maintenance shall not be made by children.
- Care must be taken to ensure that children do not play with the appliance.
- This appliance shall not be used by children. Keep the appliance and its
cord out of reach of children.
- Do not immerse the cord, plug or appliance in water or any other liquid.
- Do not let the mains cord hang over the edge of a table or worktop.
Excess cord can be stored in the base of the baby bottle warmer to
ensure stability of the appliance.
- Keep the mains cord away from hot surfaces.
ENGLISH
7
- Only connect the appliance to an earthed wall socket. Always make
sure that the plug is inserted into the wall socket properly.
- Check if the voltage indicated on the bottom of the appliance
corresponds to the local mains voltage before you connect the appliance.
- If you need to use an extension cord, make sure it is an earthed
extension cord with a rating of at least 13 amperes.
- Do not use the appliance if the plug, the mains cord or the appliance
itself is damaged. If the mains cord is damaged, you must have it
replaced by Philips, a service centre authorised by Philips or similarly
qualied persons in order to avoid a hazard.
- Do not place the appliance on or near a hot gas or electric cooker,
or in a heated oven.
- Do not preheat the appliance.
- Always place a fully assembled bottle with cap in the baby bottle
warmer before you add water.
- Make sure you add water before you switch on the baby bottle warmer.
- Hot water can cause serious burns. Be careful when the baby bottle
warmer contains hot water.
- The accessible surfaces of the appliance may become hot during use.
- Do not move the appliance when it contains hot water.
- Always check the food temperature before you feed your child.
Caution
- This appliance is intended to be used in household and similar
applications such as farm houses, bed and breakfast type environments,
staff kitchen areas in shops, ofces and other working environments,
and by clients in hotels, motels and other residential type environments.
- Unplug the appliance when it is not in use.
- Store any excess mains cord in the base to ensure stability of the
baby bottle warmer.
- Let the appliance cool down before you clean it.
- Follow the descaling instructions to avoid irreparable damage.
- Do not try to open or repair the appliance yourself. You can contact
the Philips Consumer Care Centre in your country (see
www.philips.com/support).
- The food should not be heated for too long.
ENGLISH 7
8
- Only use the appliance as described in the user manual to avoid
potential injury due to misuse.
- The surface of the heating element is subject to residual heat after
use.
You can nd the production date code YYWW in the cord storage
compartment in the base of the bottle warmer.
Electromagnetic elds (EMF)
This Philips appliance complies with all applicable standards and
regulations regarding exposure to electromagnetic elds.
Using the baby bottle warmer
With this baby bottle warmer, you can safely warm and defrost milk in
Philips Avent feeding bottles and milk or baby food in containers.
The baby bottle warmer helps to preserve the valuable nutrients and
vitamins in breast milk because it never overheats the milk. If milk
becomes too warm, nutrients and vitamins are damaged. To help preserve
the quality of your breast milk, it is important to heat the milk in a safe
and controlled way. The baby bottle warmer is designed to warm gently
and evenly and to avoid hot spots, as the milk circulates during warming.
The built-in sensor tracks and controls the milk temperature, to avoid
overheating at all times.
Note: Philips Avent breast milk bags and Philips Avent 2oz/60ml bottles
cannot be used in this baby bottle warmer.
Explanation of settings
- You can choose between the following settings: (Fig. 2)
- Defrost setting: To defrost a bottle or container with frozen milk or
frozen baby food. No warming occurs.
- Milk warming settings: Select one of these settings when you want to
warm a bottle of milk to a safe temperature. Setting 2 warms your
milk to approximately body temperature. Setting 1 warms your milk
to a slightly lower temperature and setting 3 warms your milk to a
slightly higher temperature.
- Baby food warming setting: Select this setting when you want to
warm a container or jar with baby food.
ENGLISH8
9
Using the baby bottle warmer to warm milk
1 Put the mains plug in the wall socket (Fig. 3).
2 Place a bottle centrally in the baby bottle warmer (Fig. 4).
Note: To warm milk in a milk storage container, follow the same steps as
indicated for warming milk in a bottle.
3 Fill the baby bottle warmer with the same amount of drinking
water as the amount of milk you want to warm up (for example, to
warm up 125ml/4oz of milk, you need to use 125ml/4oz of drinking
water). If you want to heat up a large amount of milk (>180ml/6oz),
the maximum water level is approximately 1cm/0.4 inches under
the rim of the baby bottle warmer (which corresponds to adding
160ml/4.5oz of drinking water). An accurate water level ensures
correct warming performance. (Fig. 5)
4 Select the desired setting (Fig. 6).
Note: Experience teaches that babies may have a preference for a specic
milk temperature. This can be due to personal preference or external factors
(e.g. environment temperature). All three settings ensure that the milk is
warmed to a safe temperature which is comfortable for your child and helps
to preserve the nutrients and vitamins in the milk.
5 Press the on/off button to switch on the appliance. The light in the
button lights up to indicate that the baby bottle warmer is on (Fig. 7).
Note: The baby bottle warmer starts warming up right after you press the button.
6 Theprogressindicatorstartstollupgraduallywithwhitelightto
show the progress of the milk warming process (Fig. 8).
Note: The progress indicator shows the progress of the milk warming process.
The progress indicator starts ashing when the appliance is on. When the rst
warming phase has been completed, the bottom segment lights up continuously
and the next segment starts ashing to show that the second warming phase is
in progress. These steps continue until the third warming phase has been
completed. Then the entire progress indicator lights up continuously.
ENGLISH 9
10
Note: During the warming process, the milk circulates to ensure even
warming. It takes about 10 minutes to warm 90ml/3oz of room-temperature
milk. It takes slightly longer to warm cold milk or a large amount of milk.
Caution: Do not take the bottle out of the baby bottle warmer while
theprogressindicatorisashing.
7 When the entire progress indicator lights up continuously, the milk
has reached the set temperature.
- When the milk is warm, you can either take the bottle out of the
baby bottle warmer to feed your baby right away (see section
‘Feeding your baby immediately’) or you can keep it warm in the
baby bottle warmer (see section ‘Keeping milk warm’).
Increasing the milk temperature
1 If you want the milk to be warmer, you can increase the milk
temperature gradually after it is ready by switching to milk warming
setting 3 and leaving the bottle in the appliance at the keep-warm
mode (Fig. 9).
2 If you just switched off the baby bottle warmer or if it just switched
off automatically, switch it back on without removing the warm
water from it, and follow the above step (Fig. 10).
3 The baby bottle warmer switches off automatically after 20 minutes
of keep-warm mode (Fig. 11).
Feeding your baby immediately
1 Press the on/off button to switch off the appliance and take out the
milk bottle (Fig. 10).
2 Always check the temperature of the milk before you feed your baby.
Gently swirl the milk in the bottle and check the temperature of the
milk by sprinkling a few drops on the inside of your wrist (Fig. 12).
3 Unplug the appliance and empty the baby bottle warmer (Fig. 13).
ENGLISH10
11
Keeping milk warm
1 When the milk has reached the desired temperature, the baby
bottle warmer automatically switches to the keep-warm mode.
In this mode, the milk is kept at the set temperature for 20
minutes (Fig. 14).
2 The baby bottle warmer switches off automatically after
20 minutes. The progress indicator switches off to indicate that the
milk is not kept at the desired temperature anymore (Fig. 11).
Note: If you want to feed your baby with milk at the set temperature, you
need to take the milk bottle out of the baby bottle warmer and feed it to
your baby right after the baby bottle warmer switches off, otherwise the milk
cools down.
Note: You cannot prolong the keep-warm mode of the baby bottle warmer for
more than 20 minutes.
Caution: It is not recommended to reheat breast milk twice, as bacteria
start to develop in the milk.
3 Always check the temperature of the milk before you feed your
baby. Gently swirl the milk in the bottle or milk storage container
and check the temperature of the milk by sprinkling a few drops on
the inside of your wrist (Fig. 12).
4 Unplug the appliance and empty the baby bottle warmer (Fig. 13).
Re-using the baby bottle warmer right away for
another bottle
If you want to heat up another bottle right away, let the baby bottle
warmer cool down for a few minutes. To speed up this process, ll the
baby bottle warmer with fresh cold water. When you switch on the baby
bottle warmer, the progress indicator starts ashing from bottom to top
to indicate that the appliance is heating up again.
Note: If the progress indicator is on but does not ash, the baby bottle
warmer is still too warm to heat up another bottle. Please switch off the baby
ENGLISH 11
12
bottle warmer, let it cool down for a few minutes and make sure you ll it
with fresh cold water.
Using the baby bottle warmer to warm baby food
1 Put the mains plug in the wall socket (Fig. 3).
2 Place a baby food container or jar centrally in the baby bottle
warmer (Fig. 15).
Note: You can leave off the lid of the food container or jar, so you can stir the
baby food during heating.
3 Fill the baby bottle warmer with the same amount of drinking
water as the amount of baby food you want to warm up (for
example, to warm up 125ml/4oz of baby food, you need to use
125ml/4oz of drinking water). If you want to warm up a large
amount of baby food, the maximum water level is approximately
1cm/0.4 inches under the rim of the baby bottle warmer (which
corresponds to adding 160ml/4.5oz of drinking water). An accurate
water level ensures correct warming performance. (Fig. 16)
4 Select the baby food warming setting (Fig. 17).
5 Press the on/off button to switch on the appliance. The light in the
progress indicator shows that the baby bottle warmer is on (Fig. 18).
Note: The baby bottle warmer starts warming up right after you press the
button. Due to the large variety of baby food consistencies, it is not possible
for the appliance to detect exactly how long the baby food should be warmed.
6 Theprogressindicatorstartstollgraduallywithwhitelightto
show the progress of the warming process. During the warming
process, do not take the jar or container out of the baby bottle
warmer but stir the baby food while the jar or container is still in
the baby bottle warmer (Fig. 19).
Note: You can start stirring the baby food once the second segment of the
progress indicator lights up continuously. Stirring before this moment is not
effective as the temperature of the baby food is still too low.
ENGLISH12
13
Caution: Do not take the food container or jar out of the baby bottle
warmer during warming.
7 When the entire progress indicator lights up continuously, the baby
food has reached the desired temperature.
Note: Due to the large variety of baby food consistencies, it is strongly
recommended that you continuously stir the baby food and check its
temperature while it is heating up for an optimal result.
- When the baby food is warm, you can either take the baby food
container or jar out of the baby bottle warmer to feed your baby
right away (see section ‘Feeding your baby immediately’) or you can
keep it warm in the baby bottle warmer (see section ‘Keeping baby
food warm’).
Increasing the baby food temperature
1 Always taste the baby food after warming it up to make sure it is
not too hot. If you want the baby food to be warmer, put the
container back into the baby bottle warmer and leave it in there at
the keep warm-mode for some time. Keep stirring the baby
food (Fig. 15).
2 If you just switched off the baby bottle warmer or if it just switched
off automatically, switch it back on without removing the warm
water from it, and follow the above step (Fig. 18).
3 The baby bottle warmer switches off automatically after 20 minutes
of keep-warm mode (Fig. 20).
Feeding your baby immediately
1 Press the on/off button to switch off the appliance and take out the
baby food container or jar (Fig. 18).
2 After warming, taste the baby food to ensure it is not too hot (Fig. 21).
3 Unplug the appliance and empty the baby bottle warmer (Fig. 13).
ENGLISH 13
14
Keeping baby food warm
1 When the baby food has reached the desired temperature, the
baby bottle warmer automatically switches to the keep-warm
mode. In this mode, the baby food is kept at the desired
temperature for 20 minutes (Fig. 22).
2 The baby bottle warmer switches off automatically after
20 minutes. The progress indicator switches off to indicate that the
baby food is not kept at the desired temperature anymore (Fig. 20).
Note: If you want to feed your baby with the baby food at the set
temperature, you need to take the baby food out of the baby bottle warmer
and feed it to your baby right after the baby bottle warmer switches off.
If you do not do this, the baby food slowly cools down.
Note: You cannot prolong the keep-warm mode of the baby bottle warmer for
more than 20 minutes.
3 Always check the temperature of the baby food before you feed
your baby. Gently stir the baby food in the baby food container or
jar and taste the baby food to ensure it is not too hot (Fig. 21).
4 Unplug the appliance and empty the baby bottle warmer (Fig. 13).
Re-using the baby bottle warmer right away for another
container of baby food
If you want to heat up another container or jar with baby food right away,
let the baby bottle warmer cool down for a few minutes. To speed up this
process, ll the baby bottle warmer with fresh cold water. When you
switch on the baby bottle warmer, the progress indicator starts ashing
from bottom to top to indicate that the appliance is heating up again.
Note: If the progress indicator is on but does not ash, the baby bottle
warmer is still too warm to heat up another container or jar with baby food.
Please switch off the baby bottle warmer, let it cool down for a few minutes
and make sure you ll it with fresh cold water.
ENGLISH14
15
Defrost setting
At this setting, you can defrost frozen milk or baby food. Follow the steps
indicated in sections ‘Using the baby bottle warmer to warm milk’
or ‘Using the baby bottle warmer to warm baby food’.
The progress indicator starts ashing when the appliance is on the defrost
setting. The progress indicator gradually lls with white light to show the
progress of the defrosting process. The milk or baby food has defrosted
completely when the entire progress indicator lights up continuously.
The defrost setting defrosts the milk or baby food but does not warm it
up. If you want to warm up milk or baby food after defrosting it, rst
switch off the appliance, then select the desired warming setting and
switch the appliance back on.
Cleaning and descaling
Cleaning
1 After each use, unplug the baby bottle warmer and let it cool
down (Fig. 23).
2 Remove the water from the baby bottle warmer for hygienic
reasons (Fig. 24).
3 Wipe the outside and inside of the baby bottle warmer with a
moist cloth (Fig. 25).
Do not use abrasive, anti-bacterial cleaning agents, chemical solvents or
sharp tools to clean the baby bottle warmer.
Note: If you used the baby bottle warmer to warm containers with baby food,
make sure that no spilled baby food remains on the bottom of the baby
bottle warmer.
Descaling
It is recommended to descale the baby bottle warmer every
four weeks to ensure it continues to work efciently.
1 Mix 50ml/1.7oz of white vinegar with 100ml/3.4oz of cold water to
descale the baby bottle warmer. First select the defrost setting,
ENGLISH 15
16
then switch on the baby bottle warmer and let the appliance
operate for 10 minutes. Leave the solution in the baby bottle
warmer until all scale has dissolved (Fig. 26).
Note: You can also use citric acid based descalers.
Note: Do not use other types of descalers.
2 Unplug the baby bottle warmer before you empty it (Fig. 23).
3 Empty the baby bottle warmer and rinse its inside thoroughly. If you
still see traces of scale after rinsing, repeat the descaling
procedure (Fig. 24).
Recycling
Do not throw away the product with the normal household waste at the
end of its life, but hand it in at an ofcial collection point for recycling. By
doing this, you help to preserve the environment.
Guarantee and support
If you need information or support, please visit
www.philips.com/support or read the separate worldwide guarantee
leaet.
ENGLISH16
17
一般說明 (圖 1)
1 嬰兒奶瓶加熱器
2 進度指示燈
3 設定及開關旋鈕
4 解凍設定
5 乳汁加熱設定1
6 乳汁加熱設定2
7 乳汁加熱設定3
8 嬰兒食品加熱設定
9 開關按鈕
重要事項
為充分享受飛利浦為您提供的好處，請至下列位址註冊產
品：www.philips.com/welcome。
使用嬰兒奶瓶加熱器前，請先仔細閱讀使用手冊，並保留說明以
供日後參考。
危險
- 請勿讓產品浸入水或其他液體中，也不要在水龍頭下沖洗。
警示
- 本產品只能在室內使用。
- 身體官能或心智能力退化者，或是經驗與使用知識缺乏者，可
在有人從旁監督或適當指示如何安全使用本產品，以及瞭解潛
在危險的狀況下使用本產品。
- 不得讓孩童清潔與維護產品。
- 請格外注意，切勿讓兒童將本產品當成玩具。
- 請勿讓孩童使用本產品。請勿讓孩童接觸產品及其電源線。
- 請勿將電線、插頭或產品浸泡在水中或任何其他液體中。
- 請勿讓電源線懸掛在桌面或流理台邊緣。多餘的電線可以收入
嬰兒奶瓶加熱器的底座中，以確保產品穩固放置。
- 電源線應遠離高溫表面。
- 僅可將本產品連接到有接地的電源插座上。並請務必確定將插
頭確實插入電源插座中。
- 在連接本產品的電源之前，請確認本產品機體底部所標示的電
壓與當地的室內電壓是否相同。
繁體中文
18
- 如果您需要延長線，請務必使用有接地，且安培數至少為
13的延長線。
- 插頭、電源線或產品本身受損時，請勿使用本產品。如果電源
線損壞，必須交由飛利浦、飛利浦授權之服務中心，或是具備
相同資格的人員進行更換，以免發生危險。
- 請勿將本產品置於或靠近炙熱氣體或電子鍋，或放在加熱烤箱
中。
- 請勿預熱此產品。
- 請務必將完全組裝的奶瓶和瓶蓋放入嬰兒奶瓶加熱器後，再加
入水。
- 請務必先加水，再開啟嬰兒奶瓶加熱器的電源。
- 熱開水可能會造成嚴重燙傷，嬰兒奶瓶加熱器中裝有熱水時請
特別小心。
- 產品表面在使用期間可能會變熱。
- 請勿移動裝有熱水的產品。
- 餵食寶寶前，請務必先確認食物溫度。
警告
- 本產品可供居家與類似用途使用，例如：農舍、供應早餐與床
位的住宿空間；店家、辦公室和其他工作場所的員工廚房區
域；以及飯店、汽車旅館與其他居住場所的房間。
- 不使用時，請拔除插頭。
- 請將任何過長的電源線收藏在底座，以確保嬰兒奶瓶加熱器穩
固放置。
- 清潔產品之前，請先讓其完全冷卻。
- 請遵循除垢指示，以免造成無法修復的損壞。
- 請勿嘗試自行打開或維修本產品。您可以聯絡所在國家/地區的
飛利浦客戶服務中心(請參閱www.philips.com/support)。
- 食物不應加熱過久。
- 僅可依使用手冊的說明來使用產品，以免因使用不當而發生潛
在危險。
- 使用後，加熱板表面可能留有餘溫。
電磁波 (EMF)
本飛利浦產品符合所有電磁波暴露的相關適用標準和法規。
繁體中文18
19
使用嬰兒奶瓶加熱器
您可以使用此嬰兒奶瓶加熱器，安全地加溫和解凍貯存在飛利浦
Avent餵哺奶瓶的乳汁，以及裝於容器中的乳汁或嬰兒食品。
嬰兒奶瓶加熱器有助於保留乳汁所含的珍貴營養和維他命，因為
它絕對不會將乳汁過度加熱。如果乳汁溫度太高，營養和維他命
就會流失。為協助保存母乳品質，請務必透過安全且控制良好的
方式將乳汁加熱。嬰兒奶瓶加熱器專為溫和均勻的加熱而設計，
在加熱期間乳汁對流時可避免局部過熱。內置的感應器能追蹤及
控制乳汁溫度，可以隨時避免過熱。
注意：飛利浦 Avent 母乳儲存袋及飛利浦 Avent 2 盎司/60 毫升奶
瓶不能在此嬰兒奶瓶加熱器中使用。
設定說明
- 您可以選用下列設定：(圖2)
- 解凍設定：用來解凍盛蛓在奶瓶或容器內冰凍的乳汁或嬰兒食
品，並無加熱效果。
- 乳汁加熱設定：當您想要將一瓶乳汁加熱至安全的溫度時，請
選擇其中一種設定。設定2會將乳汁加熱至近似體溫的溫度；
設定1會將乳汁加熱至略低的溫度；設定3會將乳汁加熱至略
高的溫度。
- 嬰兒食品加熱設定：若要加熱裝有嬰兒食品的容器或瓶子，請
選擇此設定。
使用嬰兒奶瓶加熱器加熱乳汁
1 將電源插頭插入牆上插座。 (圖 3)
2 將奶瓶置中放入嬰兒奶瓶加熱器。 (圖 4)
注意：加熱乳汁儲存容器中的乳汁，與加熱奶瓶中的乳汁的方式
相同；請依照相同步驟進行。
3 在嬰兒奶瓶加熱器中裝入與欲加熱乳汁相同的飲用水量 (例
如：要加熱 125 毫升/4 盎司的乳汁，您需要使用 125 毫升/4
盎司的飲用水)。如果您要加熱大量乳汁 (>180 毫升/6 盎司)，
則最多可加入距嬰兒奶瓶加熱器邊緣下方約 1 公分/0.4 英吋的
水量 (此時加入 160 毫升/4.5 盎司的飲用水)。精準的水量可確
保正確的加熱效能。 (圖 5)
繁體中文 19
20
4 請選擇需要的設定。 (圖 6)
注意：經驗顯示寶寶可能偏好特定的乳汁溫度。這可能是源自個
人偏好或是外在因素 (例如環境溫度)。這三種設定都可確實將乳汁
加熱至讓您的寶寶感到舒適的安全溫度，同時協助保留乳汁所含
的營養和維他命。
5 按下開關按鈕開啟產品電源。當按鈕的指示燈亮起時，表示嬰
兒奶瓶加熱器已開啟。 (圖 7)
注意：在您按下按鈕之後，嬰兒奶瓶加熱器會立刻開始加熱。
6 進度指示燈的白光開始逐漸往上增加，顯示乳汁加熱程序的進
度。 (圖 8)
注意：進度指示燈會顯示乳汁加熱程序的進度。產品開啟後，進
度指示燈就會開始閃爍。完成第一個加熱階段之後，最底下那段
指示燈會持續亮起，且下一段指示燈會開始閃爍，顯示第二個加
熱階段正在進行。上述步驟會持續進行，直到第三個加熱階段完
成為止。此時整個進度指示燈會持續亮起。
注意：在加熱程序期間，乳汁會對流，以確保均勻加熱。加熱
90 毫升/3 盎司的室溫乳汁約需 10 分鐘。冷藏乳汁或大量乳汁則
需要略長的加熱時間。
警告：當進度指示燈正在閃爍時，請勿從嬰兒奶瓶加熱器中取出
奶瓶。
7 當整個進度指示燈持續亮起時，即表示乳汁已達到設定的溫
度。
- 乳汁溫熱完畢後，您可以從嬰兒奶瓶加熱器中取出奶瓶，並且
立刻餵哺寶寶(請參閱「立刻餵哺寶寶」一節)，或者放在嬰兒
奶瓶加熱器中保溫(請參閱「保持乳汁溫度」一節)。
提高乳汁溫度
1 若您希望提高乳汁溫度，可在乳汁熱好後切換到乳汁加熱設定
3，逐漸增加乳汁溫度，然後將奶瓶留在裝置中，置於保溫模
式之下。 (圖 9)
繁體中文20
21
2 如果您剛關閉嬰兒奶瓶加熱器電源，或產品剛自動關閉電源，
請不要倒掉奶瓶加熱器中的溫水，只需重新開啟裝置，然後依
照上述步驟操作。 (圖 10)
3 嬰兒奶瓶加熱器處於保溫模式 20 分鐘後即會自動關閉電
源。 (圖 11)
立刻餵哺寶寶
1 按下開關按鈕，即可關閉產品並取出奶瓶。 (圖 10)
2 餵哺寶寶前，請務必檢查乳汁溫度。輕輕搖晃奶瓶中的乳汁，
並且在您的手腕內側輕滴幾滴乳汁檢查溫度。 (圖 12)
3 請將本產品的插頭拔除，並清空嬰兒奶瓶加熱器。 (圖 13)
保持乳汁溫度
1 當乳汁達到需要的溫度時，嬰兒奶瓶加熱器會自動切換至保溫
模式。在此模式中，乳汁會保持在設定的溫度達 20 分
鐘。 (圖 14)
2 嬰兒奶瓶加熱器會在 20 分鐘後自動關閉。進度指示燈會熄
滅，表示乳汁再也不會保持在想要的溫度。 (圖 11)
注意：如果您希望以設定溫度的乳汁來餵哺寶寶，請在嬰兒奶瓶
加熱器關閉後，從嬰兒奶瓶加熱器中取出奶瓶，並且立刻餵哺寶
寶，否則乳汁會冷卻。
注意：您無法延長嬰兒奶瓶加熱器的保溫模式超過 20 分鐘。
警告：不建議您重新加熱母乳，因為細菌會開始在乳汁中滋生。
3 餵哺寶寶前，請務必檢查乳汁溫度。輕輕搖晃奶瓶或乳汁儲存
容器中的乳汁，並且在您的手腕內側輕滴幾滴乳汁檢查溫
度。 (圖 12)
4 請將本產品的插頭拔除，並清空嬰兒奶瓶加熱器。 (圖 13)
繁體中文 21
22
立刻再度使用嬰兒奶瓶加熱器加熱另一瓶乳汁
如果您要立刻加熱另一瓶乳汁，請讓嬰兒奶瓶加熱器冷卻數分鐘。
若要加速此程序，請在嬰兒奶瓶加熱器中裝入乾淨的冷水。當您
開啟嬰兒奶瓶加熱器的電源，進度指示燈會從下到上開始閃爍，
表示產品正再度加熱。
注意：如果進度指示燈已亮起但沒有閃爍，代表嬰兒奶瓶加熱器
仍然過熱，無法加熱另一瓶乳汁。請關閉嬰兒奶瓶加熱器，讓它
冷卻數分鐘，並確認已裝入乾淨的冷水。
使用嬰兒奶瓶加熱器加熱嬰兒食品
1 將電源插頭插入牆上插座。 (圖 3)
2 將嬰兒食品容器或瓶子置中放入嬰兒奶瓶加熱器。 (圖 15)
注意：您可以打開食品容器或瓶子的蓋子，方便您在加熱時翻攪
嬰兒食品。
3 在嬰兒奶瓶加熱器中裝入與欲加熱嬰兒食品相同的飲用水量
(例如：要加熱 125 毫升/4 盎司的嬰兒食品，您需要使用 125
毫升/4 盎司的飲用水)。如果您要加熱大量嬰兒食品，則最多
可加入距嬰兒奶瓶加熱器邊緣下方約 1 公分/0.4 英吋的水量
(此時加入 160 毫升/4.5 盎司的飲用水)。精準的水量可確保正
確的加熱效能。 (圖 16)
4 選擇嬰兒食品加熱設定。 (圖 17)
5 按下開關按鈕開啟產品電源。進度指示燈亮起時，即表示嬰兒
奶瓶加熱器已開啟。 (圖 18)
注意：在您按下按鈕之後，嬰兒奶瓶加熱器會立刻開始加熱。
由於嬰兒食品的質地種類各異，因此本產品無法偵測嬰兒食品應
該加熱的確切時間。
6 進度指示燈的白光開始逐漸增加，顯示加熱程序的進度。在加
熱程序期間，請勿從嬰兒奶瓶加熱器中取出瓶子或容器，但您
可於瓶子或容器仍置於嬰兒奶瓶加熱器中時翻攪嬰兒食
品。(圖 19)
繁體中文22
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
他の言語で
- English: Avent SCF356/00 User manual
