EzCAP EZCAP221 AudioDigiBT Audio Digitizer Speaker ユーザーマニュアル

カテゴリー
MP3 / MP4プレーヤー
タイプ
ユーザーマニュアル

このマニュアルも適しています

ezcap221
A
udi
m
udi
oDigiBT
m
anual
1
Thanks for purchasing ezcap221AudioDigiBT Audio Bluetooth Recorder. Please read
this manual before use and keep it in a safe place for future reference.
You can use this device:
- Recorder audio from Bluetooth or Audio line input to digital mp3 files and save in
Micro SD card or USB drive.
- Play music through Bluetooth, Audio line input, Micro SD card or USB drive.
Overview
In the Box
ezcap221 AudioDigiBT Audio Bluetooth Recorder x1, Manual x1, Type C to USB-A
charge cable x1
Product Overview and Connection
1, Speaker
With speaker inside, can listen music directly.
2, POWER
button: keep press to switch on, keep press again to switch off.
MODE
button: press to switch between Bluetooth and Line in play and
record mode (
RECORD MODE
(PLAYBACK MODE).
3,
successfully. Slow flash:
Bluetooth playback.
4, PREVIOUS
button, press to
With speaker inside, can listen music directly.
button: keep press to switch on, keep press again to switch off.
button: press to switch between Bluetooth and Line in play and
RECORD MODE
) and USB drive and Micro SD
card play mode
Blue Bluetooth indicator LED. Fast flash
: Bluetooth pairing. On:
Bluetooth paired
Bluetooth playback.
button, press to
play previous music file.
2
button: keep press to switch on, keep press again to switch off.
button: press to switch between Bluetooth and Line in play and
card play mode
Bluetooth paired
3
5, NEXT button, press to play next music file.
6, VOLUME- button, press to decrease the volume.
7, Red charge LED. On: Charging. Flash: Low battery. Off: Normal battery, or
complete charging.
8, VOLUME+ button, press to increase the volume, there will be a beep when it
reaches the highest volume.
9, PLAY button, press to start playing music, and press again to stop playing.
10, Record / Play LED Green record and play LED. Fast flash: Recording audio. Slow
flash: Playing audio files in USB drive or Micro SD card.
11, RECORD button, press to start recording, and press again to stop recording
and save file in USB drive or Micro SD card.
12, DC5V Supply 5V/1A DC power with USB-C (Type-C) cable to charge battery
13, Connect earphone to listen the music (3.5mm TRS jack), and speaker will mute.
14, LINE INConnect to audio output port of audio source device like CD player to play
or record. (3.5mm TRS jack)
15,USBPlugUSB drive to play music, or save the recorded music files.
16,Micro SDPlug Micro SD card to play music or save the recorded music files.
Power & Charge
Red charge LED will flash when the battery is low, and connect Type-C cable to 5V USB
DC adapter to charge, LED will light, and will go off when fully charged.
4
Micro SD Card / USB drive
For file safety, it is best to empty and format the Micro SD card and USB drive before
using. Support FAT32, exFAT (does not support NTFS), MAX 64GB.
It is not recommended to connect Micro SD card and USB drive at the same time.
Switch MODEs
Power on, default in RECORD mode, and press MODE button can switch to PLAYBACK
mode.
Under PLAYBACK mode, if during playing music files, you cannot switch mode directly.
Please press PLAY button to stop playing, then press MODE button to switch mode.
The MODE switching sequence is: RECORD mode --- PLAYBACK mode (Play music in
USB drive) --- PLAYBACK mode (Play music in Micro SD card).
Start Work
RECORD MODE - Play and Record Bluetoothor Line In
Audio
Keep press POWER button to power on device, and it is in the default RECORD MODE.
You can play and record Bluetooth or Line in audio.
Blue Bluetooth LED will fast flash, and device is to pairing Bluetooth. Please set the
Bluetooth of your audio source device, like your smartphone, and find the device name
5
ezcap AudioDigiBT, and successfully paired, LED is on. Play the music or video, and
you will listen the sound from ezcap221 AudioDigiBT, and LED will slow flash. You also
can press PLAY button of device to play or stop playing, and press PREVIOUS or NEXT
button to play the previous or next file. (Maybe you need to set the audio source
device)
Plug Micro SD card or USB drive into the slot, and wait a few seconds, then press
RECORD button to start recording, the REC/PLAY LED fast flashes. Press again to stop
recording, and the recorded files will be saved in Micro SD card or USB drive you
plugged into.
Use 3.5mm audio cable to connect audio device (Such as CD player, Cassette player)
and LINE IN port of ezcap221 AudioDigiBT, and you will hear the sound.
Pressing
PLAY button can mute the speaker, but cannot really stop the playing. Press RECORD
button to start recording, the REC/PLAY LED fast flashes. Press again to stop recording,
and the recorded files will be saved in Micro SD card or USB drive you plugged into.
Note:
1, The 3.5mm audio cable is not included, please check the accessories of your audio
source device or buy it yourself.
2, ezcap221 AudioDigiBT will play the music input from LINE IN when you play the
Bluetooth music and plug audio cable into LINE IN port. And you cannot play Bluetooth
music until un-plug cable from LINE IN port.
3, During recording, device will create a DIGIBT folder in the storage, and all recorded
6
files will be saved in the form of file name AD0001.mp3.
4This device can be connected to two Bluetooth transmitting devices at the same time,
but it can only play the audio input from one of them. If the playing Bluetooth
transmitting device is paused, the device will automatically play the audio input from
another one of them.
PLAYBACK MODE - Play Recorded Files in Storage
Press MODE button to switch RECORD MODE to PLAYBACK MODE. ezcap221
AudioDigiBT will automatically play the recorded files in USB drive or Micro SD card.
Note:
1, During playing, you cannot press MODE button to switch mode. Please press PLAY
button to stop playing, then press MODE button to switch mode.
2, If you plugged USB drive and Micro SD card at the same time, device will play the
music files in USB drive.
3, The device cannot play music files that are not in the DIGIBT folder. And if there is no
DIGIBT folder in the storage and there is no playable music file in the folder, it will cause
the mode switch to fail. Need to unplug the storage to solve the problem.
4, Device also can play other music files, but please copy them in DIGIBT folder.
Specifications
7
Interface USB 2.0
Audio Input Bluetooth, 3.5mm TRS audio jack
Audio Output Speaker, 3.5mm TRS earphone jack
User Interface Button: POWER/MODE, PREVIOUS, NEXT, VOLUME -, VOLUME +, PLAY,
RECORD. Status indicator LEDs
Storage Media Micro SD card and USB drive, supports FAT32 and exFAT, does not
support NTFS format, Max 64GB.
Record Format .mp3
Record Quality 160kbps
Record File About 1.2MB/Minute, 70MB/Hour
Play Format mp3, ape, flac, wav, wma
Speaker 4 3W x1
Working Time About 2 hours to charge separately, about 5 hours for fully charged
recording (Related to playback volume)
Power Supply 1200mAh 18650 lithium battery inside, Type-C to USB power cable (Not
include 5V power adapter)
Dimensions 178(L) × 60(W) × 70(H) mm
ezcap221
音箱
音箱
说明书
音箱
感谢您购买 ezcap221 AudioDigiBT 蓝牙乐录箱。 请在使用本手并将其存在全的地方
以备将参考。
你可以使用这机器:
将来自牙或频线的音频制为数字 mp3 件并保存在 TF 卡或 U中。
播放蓝音乐音频线入音乐、TF 卡或 U里的音乐文件。
概览
包装内容
ezcap221AudioDigiBT 牙音乐制音箱 x1, 说明书 x1, Type C USB-A 充电线 x1
产品示图及连接
1、扬声器–
内置声器,可以直接音乐。
2 电源键:长按开机,再
长按
模式
牙和线路播和录音式(
切换。
3 蓝色蓝牙 LED 示灯快闪
4 上一首
,按播放一个文件。
5 下一首按键,
播放下一
6 音量减低,按减低
内置声器,可以直接音乐。
长按
机。
牙和线路播和录音式(
录制模式U盘和 TF 卡播模式(
蓝牙常亮蓝牙成功慢闪
蓝牙放。
,按播放一个文件。
播放下一
音乐件。
放模式之间
蓝牙放。
7 色充电指示灯常亮充电闪烁:电不足关闭:电量正常,或全充电。
8 音量增大,按增大达到最高量时会提示音。
9 播放/停止键,按播放乐,再按停止放。
10、录音/播放指示灯 绿色录音播放 LED快闪制音频慢闪播放 U盘或 TF 卡中的频文件。
11 录制/停止,按,再按停止录音将文保存在 U盘或 TF 卡中。
12DC5V通过 USB-CType-C线提供 5V/1A 源给充电
13 机听乐(3.5mm TRS 孔)扬声器将音。
14LINE INCD 放机源设音频输进行或录音。 3.5 毫米 TRS 插孔)
15USBU盘播放音乐,或存录的音件。
16Micro SDTF 播放音或保录制文件。
电源&充电
低时红色充电指灯闪烁,将 Type-C 线 5V USB DC 适配进行充电,LED 会常亮,充
熄灭
TF /U
安全,最好在使用前清空TF 卡和 U 盘。支持 FAT32exFAT支持 NTFS最大 64GB
不建议时连TF 卡和 U 盘。
切换模式
开机,默认录制,按模式以切换回放式。
回放模式如果音乐文件不能模式请按回放停止放,然后模式切换式。
模式切换顺序为:录制模式---回放式(播放 U音乐---回放(播放 TF 卡音乐
开始工作
录制模式 - 放和录制蓝或线路输入音频
长按电源键开机,默认模式您可和录制牙或线路输频。
蓝色蓝牙 LED 速闪烁配对牙。请置您的音源设的蓝牙,例如您的智能机,找到设
-ezcap AudioDigiBT配对成功LED 常亮播放音乐或,您 ezcap221 AudioDigiBT
音箱输的声音,LED 会慢闪。您以按备的播放放或停止,按一首一首播放
一个一个件。 (可需要置音源设
TF 卡或 U 秒钟然后录制键开制,REC/PLAY LED 快速闪烁次按下停
录音录音件将在您入的 TF 卡或 U 中。
使用 3.5mm 音频线音频备( CD 播放、卡 放器 ezcap221 AudioDigiBT LINE IN
您将听。按 播放键可以使扬声器音,不能停止。按 录制键开音,REC/PLAY LED
快闪次按停止录音文将保在您入的 TF 卡或 U 盘中。
注意:
1包含 3.5mm 线,请查看您的音源设或自买。
2ezcap221 AudioDigiBT 在播放蓝音乐,将频线LINE IN 可播放 LINE IN 输入的音
乐。非从 LINE IN 否则无法蓝牙音乐。
3、录音中,在存器中一个 DIGIBT 文件音文文件AD0001.mp3
式保存。
4,本备可以同时连蓝牙发射备,是只放其中台输入音频,果正放的蓝牙发射
播放,本播放蓝牙发射备输入音频
回放模式 - 放存储中的制文件
模式录模切换式。 ezcap221 AudioDigiBT 播放 U 盘或 TF 卡中录的文件。
注意:
1、播放不能模式键切换式。请按播放停止播放,然后模式模式。
2如果时插U盘和 TF 卡,将播放 U盘中音乐文件。
3无法播放DIGIBT 文件音乐件。如果器中DIGIBT 文件播放乐文件,
能会导致式切换失败需要拔掉问题
4可以放其乐文件,请将它们复DIGIBT 文件中。
规格参数
接口 USB 2.0
音频输入 蓝牙,3.5 毫米 TRS 音频插孔
音频输出 扬声器,3.5mm TRS 插孔
用户界面 按键:电/模式、上一下一、音-、音+播放、制。 状态示灯
存储介质 TF 卡和 U 盘,支持 FAT32 exFAT支持 NTFS 式,最大 64GB
记录格式 .mp3
录音质量 160kbps
录制文件 1.2MB/分钟70MB/
播放格式 mp3, ape, flac, wav, wma
喇叭 4 3W x1
工作时间 单独充电2录音5放音有关)
电源 内置 1200mAh 18650 Type-C USB 线(5V 适配
尺寸 178() × 60() × 70() mm
VER20211223
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment. This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

EzCAP EZCAP221 AudioDigiBT Audio Digitizer Speaker ユーザーマニュアル

カテゴリー
MP3 / MP4プレーヤー
タイプ
ユーザーマニュアル
このマニュアルも適しています