Gechic On-Lap 1503E ユーザーマニュアル

ブランド: Gechic

モデル: On-Lap 1503E

タイプ: ユーザーマニュアル

このマニュアルは次のような方にも適しています

On-Lap 1503E/H/I

User Manual

ユーザーガイド

Noces, Cauons & Warranty Exclusions —I

LCD Pixel Statement —I

FCC & CE Statement —II

WEEE Symbol Informaon —II

Chapter 1 Parts of On-Lap Monitor and Accessories

—1

Secon 1 On-Lap Monitor and Accessories Descripon —1

Chapter 2 Installaon Instrucons

—3

Secon 1 Protective Cover & Detachable Stand —3

Secon 2 Connecon of Video Cable and USB Touch & Power Cable —3

Secon 3 Installaon of Rear Dock (Only for 1503H/I) —4

Secon 4 Installaon of On-Lap Proprietary HDMI-A & USB-A to

Dock Port Cable (Only for 1503H/I)

—5

Secon 5 Installaon of 1503 Mul-Mount Kit —5

Secon 6 Installaon of Stand 4 —6

Chapter 3 Sengs of Extended Display

—6

Section 1 Sengs of Extended Display on Windows 10 —6

Section 2 Settings of Extended Display on Mac OS X —6

Chapter 4 Using of Touch Monitor (Only for 1503I)

—7

Secon 1 Noces —7

Secon 2 Touch Screen Sengs on Windows 10/ 7 —7

Chapter 5 Hot Keys, LED Light and OSD Instrucons

—8

Secon 1 Hot Keys and LED Light Descripon —8

Secon 2 OSD Descripon —8

Chapter 6 Specicaon

—10

Secon 1 General Specicaon —10

Secon 2 Supported Operang Modes —11

Secon 3 Supported Video Modes —12

Chapter 7 Troubleshoong

—12

Table of Contents

—III

—IV

WEEE

—IV

—13

1 —13

—15

1 —15

2 . USB —16

3 Rear Dock (On-Lap1503H/I ) —16

4 HDMI-A + USB-A to Rear Dock 専用」取付

(1503H/I )

—17

6 4

—18

1. - Windows 10

—18

2 - Mac (OS X)

—19

(On-Lap1503I )

—19

2. Windows 10/7

—19

LED OSD

—20

1. LED

—20

2. OSD

—21

六 —22

1. —22

2. —23

3. —23

—24

Noces, Cauons & Warranty Exclusions

Warning: The sign alerts you to potenal hazards that can hurt you or damage the

product.

1. When carrying On-Lap Monitor, please put it into the protecve cover with glass side

inward and avoid pressing the monitor violently and rubbing the glass surface by any

sharp objects.

2. When plugging in/out the cables, do make sure the force exerts in horizontal direcon

- do not shake the port or plug it in vercal direcon. Any damage caused by wrong

plug urging is not included in the warranty coverage.

3. The power input specicaon for On-Lap monitor is 5V 2A DC current. Inpung On-

Lap Monitor more than 5V can cause shortages, and this will void the GeChic Manufac-

turer's Warranty. We suggest you to connect both connectors of the USB power cable

to your desktop΄s USB ports or use GeChic 5V-2A charger.

4. Part of On-Lap Monitor or its protecve Cover contains magnets, please put On-Lap

Monitor away from hard drive or any device that may be eected or damaged by

magnets. Please put the magnec buckle of protecve cover away from your desktop

when the PC is in sleep mode or boosng.

5. Cleaning On-Lap Monitor : Unplug the power input before cleaning. Please use so

cloth to clean touch screen. For stubborn stains, please use lightly-dampened cloth to

wipe again. Do not use benzene, alcohol, thinner, ammonia, abrasive cleaners, com-

pressed air or other corrosive solvents. These solvents may cause permanent damage

on the screen or leave unremovable stain.

6. Please do not place the monitor on a shaky or unstable table, cupboard or trolley and

do not use the On-Lap Monitor on a moving vehicle. The Product may be severely

damaged from overturning or falling.

7. The product is not waterproof. Do not use this product in or near water.

8. Do not insert any object into the Product΄s slots or gaps. Do not disassemble the

monitor in any way.

9. High volume warning: High volume can lead to lasng damage to your hearing. Please

check the volume sengs before reproducing any sound.

10.Overuse of the monitor may result in vision damage. For every 30 minutes with the

monitor, give your eyes 10 minutes break. Avoid children under age 2 to watch with

the monitor; prevent children over age 2 from watching with the monitor over 1 hour

per day.

11.Exclusions from Warranty Service

Please read the warranty terms below carefully, and follow the usage guide and pre-

cauonary notes. Please keep this manual for future reference.

GeChic does not warrant uninterrupted or error-free operaon of this Product. The

warranty only covers failure /malfuncon under normal use condions during warran-

ty period. The warranty does not apply to the following condions:

(1)The bar code has been removed or worn down, and cannot be idened.

(2)This product has been modied, disassembled, or reed.

(3)Display and touch funcon working normally; only variaon in appearance (e.g.,

ageing, arion, scratch, color changing and etc.)

(4)Any breakdown caused by power supply. (i.e., inpung power over 5V or unsteady

current)

(5)Any damage caused by disoperaon or failure to follow this manual. (i.e., Plug or

unplug the cable in wrong direcon and causing damage on cable or monitor.)

(6)Any damage caused by hing or cracking monitor accidentally or purposely, or

collapsing or overturning monitor.

LCD Pixel Statement

There is slightly uneven brightness on the screen when displaying dierent screen paern.

The LCD screen has 99.99% or more eecve pixels. 0.01% of pixels or less may not light or

may light incorrectly. The On-Lap monitor uses a high quality LCD panel. Nevertheless, pixels

on the LCD screen may not light or appear as red or black dots. All the above are normal with

the LCD monitor and will not aect the normal usage of the product.

Avoid placing the monitor against sun-light, or it may damage the monitor.

An aerimage of the previous screen may remain, when the same image is displayed for

hours. In this case, the screen is recovered slowly by turning o the power for a few hours.

Federal Communicaons Commission (FCC) Class B Statement

Noce: This equipment has been tested and found to comply with the limits for a class B

digital device, pursuant to part 15B of the FCC Rules. These limits are designed to provide

reasonable protecon against harmful interference in a residenal installaon.

If this equipment does cause harmful interference to radio or television recepon, which can

be determined by turning the equipment o and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separaon between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit dierent from that to which the receiver

is connected.

4. Consult the dealer or an experienced radio/TV technician for help.

Cauon:

1. Changes or modicaons not expressly approved by GeChic Corp. could void the user's

authority to operate the equipment.

2. Shielded interface cables and AC power cord, if any, must be used in order to comply with

the emission limits.

3. The manufacturer is not responsible for any radio or TV interference caused by unauthor-

ized modicaon to this equipment. It is the responsibilies of the user to correct such

interference.

CE Declaraon of Conformity

This product complies with the following standards:

● EN60950-1:2006 and A11+A1 (Safety requirement of Informaon Technology Equipment).

● EN 55032:2006+A1: 2007 (Radio Disturbance requirement of Informaon Technology

Equipment).

● EN55024:1998+A1:2001+A2:2003 (Immunity requirement of Informaon Technology

Equipment).

● N 61000-3-2:2006+A1: 2009+A2: 2009 (Harmonic current emissions).

● EN 61000-3-3:2008 (Voltage uctuaons & icker) following provisions of direcves

applicable.

● 2006/95/EC (Low Voltage Direcve).

● 2004/108/EC (EMC Direcve).

● 2005/32/EC (EuP Direcve, EC No. 1275/2008 implemenng Direcve for Standby and O

mode power consumpon) and is produced by a manufacturing organizaon on ISO9000

level.

WEEE Symbol Informaon

This symbol on the product, accessories or literature indicates that this product

and its electronic accessories (e.g., adapter, cables, and Rear Dock) must not be

disposed of with your other household waste. Instead, it is your responsibility to

dispose of these items by handing it over to a designated collecon point for the

recycling of waste electrical and electronic equipment.

For more informaon about where you can drop o your waste equipment for recycling,

please contact your local city oce, your household waste disposal service or the shop where

you purchased the product.

For Disposal in Countries Outside of the European Union

If you wish to discard this product and its accessories in other area and countries, please

contact your local government for applicable laws and regulaons governing the disposal of

this product.

Chapter 1 Parts of On-Lap Monitor Accessories

Secon 1 On-Lap Monitor and Accessories Descripon

1. Parts Descripon

Fig.: 1503E/H/I Buons and LED light Descripon

Fig.: On-Lap 1503 Input & Output Ports

Fig.: On-Lap 1503E Back

Fig.: On-Lap 1503E/H/I front

Fig.: On-Lap 1503H/I Back

3. Oponal Accessories

2. Package & Accessories

Accessories 1503E 1503H 1503I

USB-A to USB-C Power Cable(1.2m) *1

○ ○ -

USB-A to USB-C Power & Touch Signal Cable(1.2m) *1

- - ○

USB-A (male) to USB-A (female) Power Cable(1.2m) *1

- - ○

HDMI-A to Micro HDMI Video Cable(1.2m) *1

○ ○ ○

Charger(5V, Max. 2A) *1

○ ○ ○

Protecve Cover*1 & Detachable Stand*1

○ ○ ○

Usage Manual *1

○ ○ ○

Sloed Screw-silver (M2 x 7.5mm) *1

○ ○ ○

Phillips Screw-black (M2 x 3.2mm) *2

○ ○ ○

Items Applicable Models

On-Lap Proprietary VGA Cable (1.2m/2.1m)

Proprietary cable for On-Lap products.

One plug is D-sub (male) for connecng to computer΄s VGA port ;

the other plug is micro-HDMI (male) for connecng to On-Lap 1503.

On-Lap 1503E/H/I

HDMI-A to Micro HDMI Video Cable (2.1m)

One plug is HDMI-A (male) for connecng to computer΄s HDMI-A

port ; the other plug is micro-HDMI (male) for connecng to On-

Lap1503.

On-Lap 1503E/H/I

mini-HDMI to Micro HDMI Video Cable (2.1m)

One plug is mini-HDMI (male) for camera΄s mini-HDMI port ; the

other plug is micro-HDM (male) connecng to On-Lap1503.

On-Lap 1503E/H/I

Micro HDMI to Micro HDMI Video Cable (1.2m)

One plug is Micro HDMI(male) for laptop’s, camera’s micro HDMI

port; the other Micro HDMI plug is connecng to On-Lap 1503.

On-Lap 1503E/H/I

USB-A to USB-C Power and Touch Signal Cable (2.1m)

One plug is USB-A (male) for adapter/ computer USB port; the other

one is USB-C (male) for 1503 connecng to On-Lap 1503.

On-Lap 1503E/H/I

On-Lap Proprietary HDMI-A & USB-A to Dock Port Cable

(1.2m)

Proprietary cable for On-Lap 1503.

One plug is 1503 proprietary connector for plugging into Rear

Dock΄s port ; the other two plugs are HDMI-A (male) and USB-A

(male). Please refer to Chapter 2>Secon 4.

On-Lap 1503H/I

Rear Dock

The Rear Dock shall be installed on the backside connector of 1503.

It equips with HDMI-A input and USB-A input for installing Comput-

er Sck or HDMI wireless display. For aaching a power bank on the

Rear Dock, refer to Chapter 2>Secon 3.

On-Lap 1503H/I

Mul-Mount Kit for 1503

Proprietary for On-Lap 1503. With 4 VESA 100 screw holes and a

1/4”scew holes for scewing On-Lap 1503 on VESA 100 Arm or

camera cradle head. Refer to Chapter 2 > Secon 5.

On-Lap 1503E/H/I

Stand 4

An oponal stand for On Lap 1503. It supports horizontal display

and 4 adjustable viewing angles. Refer to Charpter2> Secon6.

On-Lap 1503E/H/I

Chapter 2 Installaon Instrucon

Secon 1 Protecve Cover & Detachable Stand

1. The Use of Protecve Cover

Take monitor out : Hold two sides of the monitor by hands, rotate aside the Cover Lock

and separate cover and monitor by the upside.

Put monitor back : Put the monitor back to the cover with the panel side inward.

Fig.: Take the monitor out and put it into the protecve cover

2. Installaon of Detachable Stand

A. Horizontal Display

As the g. below, take the magnec buckle o. There are 4 slots

for aligning. Put the magnec buckle in one of the slots and the

Cover Stand is set.

B. Vercal Display (Not applicable to On-Lap 1503I Monitor)

As the g. below, remove the 3 screws. Take o the Detachable

Stand and put the magnec buckle into the lower slot. Align Stand΄s mental latch to the

slots on the side of monitor and put monitor into the stand nally.

Warning: When not in use, please put the monitor back in the Protecve Cover with its

backside outward. Please also rotate down the Cover Lock to prevent the monitor from

sliding out.

Warning: In order to avoid overturning, the magnec buckle can be only put in slot A, but

not B or C. While seng Monitor vercally, touching or hing Monitor is forbidden.

Secon 2 Connecon of Video Cable and USB Touch & Power Cable

1. Connect Video cable and USB power cable

As the Fig. below. Please connect USB power

cable rst and then connect video cable.

Power supply could be form computer΄s two

USB ports or the 5V-2A charger.

PS. If single USB port of the laptop can΄t pro-

vide sucient power, it may cause monitor

ash or fail to display ； please plug both USB

touch cable and power cable into laptop΄s USB

ports for providing twice power.

2. Connect USB-A (male) to USB-A (female) Power Cable(1.2m) and 5V-2A Charger

(Applicable to On-Lap 1503I)

When the laptop equipped with only one USB port which can't supply enough power, please

connect the male plug○

(10cm long) to USB-A (male) to USB-A (female) cable(1.2m). By this,

5V-2A adapter can be connected for power supply.

Noce: USB-A (female) touch power cable΄s○

plug can transmit both power and touch

signal; ○

plug is for power supply only. If ○

plug is not connected to computer΄s USB port,

touch funcon cannot work.

Secon 3 Installaon of Rear Dock (Only for 1503H/I)

As the g. below, take o the rubber bung

on the back of monitor rst. Insert “Rear

Dock” into 1503΄s connector and then secure

it by screws. Insert you Compute Sck, Sck

type PC, or wireless HDMI adapter, such as

Microso® Wireless Display Adapter into

Rear Dock΄s HDMI-A port. (Please select

“HDMI 2” as input source by OSD seng)

Fig.: Take o the Rubber Bung and

Insert the Rear Dock

Fig.: Install a Compute Stick

Fig.: Install a Power Bank

Fig.: Install a Wireless HDMI

Adapter

Secon 4 Install On-Lap Proprietary HDMI-A & USB-A to Dock Port Cable

(Only for 1503H/I)

From Fig. below, take o the rubber bung on the back of monitor rst. Insert On-Lap

Proprietary HDMI-A & USB-A to Dock Port Cable into 1503΄s port on the back and secure

it by screws. Connect USB-A plug to computer΄s USB port and connect HDMI-A plug to

computer΄s HDMI port. (Please select “HDMI 2”as input source by OSD seng)

Fig.: Take o the rubber

bung and install the cable

Secon 5 Installaon of 1503 Mul-Mount Kit

1.VESA Arm

From Fig. below, screw Mul-Mount Kit to On-Lap 1503 monitor rst. Align the VESA 100

screw holes of Mul-Mount Kit to VESA arm΄s and then secure the monitor to VESA Arm

by aached 4 screws.

Fig: ○

○

Screw Mul-Mount Kit to On-Lap monitor and ○

screw monitor with Mul-

Mount Kit to VESA 100 arm.

2. Tripod

As the Fig. below, screw Mul-Mount Kit to On-Lap 1503

monitor rst and then align the 1/4”screw on Tripod΄s

cradle head to the screw hole of Mul-Mount Kit and

secure them by spin.

Cauon: If Mul-Mount Kit is not screwed to On-Lap monitor, monitor may fall and dam-

age. When moving and adjusng the monitor, please hold Mul-Mount Kit. Do not drag

the monitor itself directly.

Secon 6 Installaon of Stand 4

Select the desired angle placement to assemble Stand 4. During assembly, check if X plate

is properly inserted onto slot and posion On-Lap 1503 at the boom center of monitor.

Fig: Install Stand 4

Fig: Place the monitor in Stand 4

Chapter 3 Setting of Extended Display

Section 1 Settings of Extended Display on Windows 10

Press and choose “Sengs” > select ”System” > select “Display”. Then choose ”Extend

these displays” at Mulple displays. Click Advanced display sengs and choose

“1920x1080” at Resolution”for On-Lap 1503. Select “Landscape” at Orientation; when

use 1503E/H in vertical mode, select “Portrait”.

Section 2 Settings of Extended Display on Mac OS X

Click , then select“System Preference”>“Arrangement” tab, and uncheck "Mirror

Displays". Select one of the blue rectangles, and drag to the desired position.

When you connect 1503 to a Macbook and the 1503’s layout and text are smaller than

Macbook‘s monitor, please choose “1600x900” at “Resoluon” for decreasing the

dierence between displays.

Click“Display“tab, select resoluon of

the laptop rstly, then click "Gather

Windows", and select resoluon to

"1080p" for On-Lap 1503. For vercal

display, select 90ﾟ at "Rotaon".

Chapter 4 Using of Touch Screen (Only for 1503I)

Secon 1 Noces

1. Computer with operang system of Windows 10/7

supports On-Lap 1503I's touch funcon. If computer

does not be equipped with Windows 10/7, it may not

be able to use On-Lap 1503I's touch funcon. Please be

noced whether the computer's operang system

supports an external touch monitor.

2. As the g., USB power & touch cable ① can transmit

both power and touch signal at the same me; ② only can transmit power. If ①

connector does not connect to computer's USB port , then touch funcon will be no

longer available.

Secon 2 Touch Screen Sengs on Windows 10/ 7

If your computer does not enable touch screen funcon automacally or recognize mul-

screen, then touch screen will not sense touch posion accurately. Please use Windows

10/7 "Tablet PC Sengs" of Control Panel to start touch screen sengs.

In Windows 10, search "Calibraon" at 'Sengs', then select "Calibrate the screen for pen

or touch input”. In Windows 7, select "Tablet PC Sengs" at Control Panel to start touch

sengs.

As the g. below, please select "Sengs (S)", and follow Windows on-screen instrucons

to calibrate the touch points on On-Lap 1503I to complete touch sengs.

Seng Steps for Windows 10

Seng Steps for Windows 7

1. On-Lap 1503I

Noce of Operang System Compliance

On-Lap 1503I supports Windows10/8.1/7 .

You can plug & touch on Windows 10/8.1/7

without any driver installaon

Some revisions of Windows 8/8.1 before

2015/10/15 which requests for dierent

product code may not recognize 1503I.

Please upgrade your Windows, or email

Gechic for 1503I rmware change.

For Linux and Android developer, please

acve ”HID mul-touch panels” while

establishing kernel, and the external touch

monitor can be supported. Or email Gechic

for Linux driver for seng in Linux/Android

system.

Chapter 5 Hot Keys, LED Light and OSD Instrucons

Secon 1 Hot Keys and LED Light Descripon

Noce: If need to adjust “Increase/up ” or “Decrease/down ”

connuously , press the buon and don't release. Do not press two buons at the same

me, or it may cause no response or fault response.

LED Lights Descripon ：

It shows green light when turn on On-Lap Monitor and shows red light when stand by.

There is no light when the monitor is o.

Hot Keys Descripon

Power: Press the Power Buon to power on/o the Monitor.

Exit: In the OSD panel, press the Exit Buon to exit and back to the previous page.

Menu/Select: Press the Menu Buon to launch OSD panel. In OSD panel, press this

buon to select and enter the next page.

Increase Volume/UP: Press this Button to show "Volume bar." In the OSD menu, press this button to

move up or to the left. Press and hold this button to increase the volume continuously.

Decrease Volume/Down: Press this Button to show "Input Source." In the OSD menu, press this

button to move down or to the right. Press and hold this button to decrease the volume continuously.

If press both "Increase Volume/Down " and "Exit " at the same time, OSD will be reset as the factory

settings.

If press both " Increase Volume/Up " and "Decrease Volume/Down " at the same time, you can

enable "Mute" mode. Press these two buttons again to release mute mode.

Secon 2 OSD Descripon

When turning on On-Lap monitor at the rst me, the "Language Select" menu appears

on the le top. Please press " Menu/Select" buon to choose the language you like,

then the "Language Select" menu won't appear next me. If press "Exit" buon to

disable the "Language Select" menu, it will appear again when powering on the monitor

next me.

1. Basic Buon Operaon

Press buon to launch the OSD panel. Press or to view the funcons. To adjust

a certain funcon, press to launch it. If the selected funcon consists of sub-menu,

press or again to view the sub-menu. When the desired funcon is highlighted,

press to launch it. Press or to change the seng. To exit, press to exit. Repeat

the preceding steps to adjust other seng.

2. Display Sengs

As the g. shown, enter "Display Sengs" to adjust

"Brightness", "Contrast", "Sharpness", and the other

funcons.

1)ECO Mode: The maximum brightness is at 50 in Eco

Mode.

2)Auto Adjust: Launch "Auto Contrast Adjust" and

"Auto Brightness Adjust" to adjust brightness and

contrast automacally to ensure the highest quality

when displaying moving images.

3. Color Sengs

1)Color Eect: In Color Eect, there are 4 modes:

"Standard", "Photo", "Game", and "Movie" oered to

be selected.

2)Blue Light Reducon: Select "On" to reduces the

screen's blue light automacally.

3)Color Temperature: Select "Cool" to increase the blue

color of the image; Select "Warm" to increase the red

color of the image. Select "User" to adjust the RGB

color sengs manually.

4. Aspect Rao

1)Aspect rao: When select "16:9 Full Screen", the

monitor displays a 16:9 image in full screen. When

select 4:3, the monitor displays a 4:3 image with le-

right side black borders to ll the 16:9 screen. When

select "Original", the monitor displays the image in its

original size.

2)Overscan: only available when inpung HDMI video

signal (e.g.,1080P/720P). Enabling this funcon allows

you to calibrate the display area.

5. Manual Image Adjust

1) Auto Adjust: Adjust image settings automatically. Only available

when inputting VGA video signal.

2) H. Position: Move screen image to left/right.

3) V. Position: Move up/down screen image.

4) Clock: Adjust the pixel clock for horizontal sweep. If the frequen-

cy is not correct, the screen shows vertical stripes and the image

is not proportional.

5) Phase: Adjust the phase of the pixel clock signal. With a wrong

phase adjustment, the screen shows horizontal disturbances.

6. OSD menu

1) Language Select: Change to the other language.

2) H. Position: Move the OSD menu to left/right.

3) V. Position: Move up/down the OSD menu.

4) OSD Timer (sec): Adjust idle time before OSD menu disappears.

5) OSD Transparency: Make the OSD menu transparent to show

the background.

6) Auto Power Off: Select "On" to launch this function, when no

image displayed on the screen, the monitor will enter Stand -by

mode, and power off itself after 15 minutes. Select "Off" to

disable this function. The monitor will stay in Stand-by mode and will not power off.

7) Power On/Off Indicator: Select "Off" to turn off the Power On/Off Indicator.

8) Power Button Lock: Select "On" to lock the Power Button.

7. Audio Settings

Adjust audio volume or select silent mode.

8. Input Source:

1) Select Analog VGA source, HDMI1 digital video signal (from the

left HDMI

port) or HDMI 2 digital video signal (from the HDMI port on

Rear Dock).

2) Auto Search: When "On" is selected, the monitor will detect

three video input sources in sequence, and the monitor will

display the first one read. When "Off" is selected, only the video

source selected in Input Source will be displayed. If no such

selected video signal inputs, the monitor will show "no signal"

warning message, and won’t check other video sources.

3) CEC Mode: When "On" is selected, users can turn on or off the monitor by connecting to the device

with HDMI CEC function such as DVD player, camera, or PlayStation game console.

9. Information

Show the frequency of the input image, On -Lap model, firmware version ...etc.

1) Reset: Select "Yes" to reset to defaults.

Chapter 6 Specicaon

Secon 1 General Specicaon

Model On-Lap 1503E On-Lap 1503H On-Lap 1503I

Panel Wide Screen 15.6”(16:9) Wide Screen 15.6”(16:9) Wide Screen 15.6”(16:9)

Resoluon

/Color Depth

1920x1080

/262K colors

1920x1080

/262K colors

1920x1080

/262K colors

Viewing Angle

(Typical)

170

∘

(H)/170

∘

(V)(CR>10) 170

∘

(H)/170

∘

(V)(CR>10) 170

∘

(H)/170

∘

(V)(CR>10)

Brightness 220(cd/m

) 300(cd/m

) 250(cd/m

)

Contrast Rao

(Typical)

700:1 800:1 800:1

Response Time

(Typical)

15(ms) 15(ms) 15(ms)

Touch

Technology&

Compable

system

No touch screen No touch screen

Projected capacive

touch screen; 10-point

mul-touch; Input by

ngers. Support Win-

dows 10/8.1/7

Screen Coang No touch screen No touch screen

Touch screen hardness

≧ 7H

Video Input HDMI*1, VGA*1 HDMI*2, VGA*1 HDMI*2, VGA*1

Audio Output Earphone Jack Earphone Jack Earphone Jack

Speakers 1.5W (Max.)x 2 1.0W (Max.)x 2 1.0W (Max.)x 2

HDCP Support Yes Yes Yes

HDMI CEC Sup-

port

Yes Yes Yes

Plug & Play VESA DDC2B/C1 VESA DDC2B/C1 VESA DDC2B/C1

Power Consump-

on

≦ 10W ≦ 10W ≦ 10W

Power Consump-

on- Standby

Mode

<0.5W <0.5W <0.5W

Model On-Lap 1503E On-Lap 1503H On-Lap 1503I

Power Con-

sumpon- O

Mode

<0.5W <0.5W <0.5W

Rang Voltage/

Current

5V 2.0A(Max.) 5V 2.0A(Max.) 5V 2.0A(Max.)

Dimension

(Typical)

382mm*246mm*11mm

(Monitor)

389mm*251mm*10mm

(Cover)

382mm*246mm*11mm

(Monitor);

389mm*251mm*10mm

(Cover)

382mm*246mm*12mm

(Monitor);

389mm*251mm*10mm

(Cover)

Weight

(Typical)

779g (Monitor)

282g(Stand)

290g(Cover)

798g (Monitor)

282g(Stand)

290g(Cover)

1064g (Monitor)

282g(Stand)

290g(Cover)

Safety

R53848

RoHS

Secon 2 Supported Operang Modes

Resoluon Refresh Rate

Horizontal

Frequency(kHz)

Vercal

Frequency(Hz)

640x480 60Hz 31.469 59.940

720x480 60Hz 29.855 59.710

800x600 60Hz 37.879 60.317

848x480 60Hz 31.02 60.000

960x600 60Hz 37.212 59.635

1024x768 60Hz 48.363 60.004

1152x864 60Hz 53.783 59.959

1280x600 60Hz 37.377 59.900

1280x720 60Hz 45.000 60.000

1280x768 60Hz 47.776 59.870

1280x800 60Hz 49.702 59.810

1280x960 60Hz 60.000 60.000

1280x1024 60Hz 63.981 60.020

1360x768 60Hz 47.712 60.015

1366x768 60Hz 47.712 59.790

1360x1024 60Hz 63.606 59.836

1400x1050 60Hz 65.317 59.978

1440x900 60Hz 55.935 59.887

1600x900 60Hz 55.990 59.946

1600x1024 60Hz 63.675 59.901

1680x1050 60Hz 65.290 59.954

1920x1080 60Hz 67.500 60.000

Secon 3 Supported Video Modes

Supported Operang Modes

1920x1080P (50Hz/59.94Hz/60Hz) 1280x720P (50Hz/59.94Hz/60Hz)

720x480P (59.94/60Hz) 640x480P (59.94/60Hz)

Chapter 7 Troubleshoong

Problem Soluon

Touch On-Lap 1503I in the

extended display, but the

cursor appears only on the

main display, not 1503I.

Please refer to Chapter 4, Secon 2 "Touch Screen Sengs

on Windows 10/7" to start the “Tablet PC Sengs”

No response on the touch

screen?

Please refer to Chapter 2, Secon 2 to check whether the

USB cable is connected correctly to the computer , and

whether the operang system supports external touch

screen or not. (Ex: Most of smartphones, Apple

's comput-

ers do not support external touch screen.

Touchscreen funcon

doesn’t work somemes and

then work again aer re-

starng the 1503I.

It may be caused by the insucient power from the com-

puter 1503I connects to. Therefore, the computer cut the

transmission of touch signal. Please connect both two USB-

A (male) plugs to the USB ports or plug the sub USB-A plug

to a 5V-2A charger.

No image shown or "No

Signal " warning, or Power

On/O Indicator won't turn

on.

1. Check whether if the Power On/O Indicator showing

green light or not. If not, it indicates there is no power

inpued, please connect to power.

2. Check whether if the HDMI cable has been rmly con-

nected to On-Lap monitor's HDMI port.

3. Please press the hot key to select the corresponding

video input source, or enter “Input Source” in OSD menu

and select “On” in Auto Search.

Randomly no display or go

blank Or showing

"Insucient Power Warning"

on the monitor

1. Please avoid pulling the cables.

2. Please connect to a 5V-2A charger to ensure the power

supply is enough.

3. Lower the volume and the brightness. High volume and

brightness may increase power consumpon and cause

the monitor going o.

4. Please connect to the 5V-2A charger in case the possibil-

ity of insucient power of On-Lap 1503.

Brightness and volume are

dropping o and the monitor

shut down or restart auto-

macally.

The consumed power is higher than input power. Please

decrease the brightness and volume. Furthermore, in-

crease the power current input by connect both USB-A

plugs to computer’s USB ports or the 5V-2A charger.

Why my monitor shows Out

of Range?

It means the video source inpued is not in On-Lap's sup-

ported video input formats, and the monitor cannot display

the resoluon or the frequency normally. Please check On-

Lap's supported operang modes.

The monitor gets darker or

brighter automacally

Please turn o "Auto Contrast Adjust" or "Auto Brightness

Adjust."

The brightness has been set

down, but the screen bright-

ness does not decrease.

GeChic Corporation

11F-3, No. 138, Zhongming S. Rd.,

West Dist., Taichung, Taiwan (R.O.C.)

Customer Service: service@gechic.com

Rev: 2018/6/15

III

ご使用上の注意事項と警告および製品保証について

この表示に従わなかった場合、けがをする恐れや製品に物理的な破損が生じる可能性が

あることを示します。

1. 外出時には、必ずモニタに保護カバーを装着してパネル面を内側にして携帯してください。

モニタが押されたり鋭利な物に接触しないようご注意ください。

2. USB または映像入出力ケーブルを挿入する前に、挿入方向が正しいかどうか確認してく

ださい。コネクタを抜く際は必ず USB ポートまたは映像入力ポートの方向に平行に引き

抜いてください。強い力でコネクタを揺らさないようにしてください。反対方向（上下逆向

き）に挿入したり、その他適切でない取扱いによって USB ポートや映像入力ポートが破

損した場合、保証期間中であっても無償修理サービスは適用されません。

3. On-Lap モニタの電源入力規格は 5V 2A DC 電流です。5V 以上の電流を流すとモ

ニタの故障を引き起こすおそれがあります。この故障は保証対象外となりますのでご了承

ください。PC の USB ポート x2 か当社製 5V 2A AC アダプターに接続して電源供

給することをお薦めいたします。

4. On-Lap モニタや付属の保護カバーにはマグネットがついています。PC のハードディス

クやその他磁気の影響を受けて破損するおそれのある物品に近づけないでください。PC

が起動中またはスリープ状態にあるときは、保護カバーのマグネット部分には近づけない

でください。

5. モニタのお手入れ時の注意事項：お手入れ前には、電源を抜き、やわらかい布でモニタを

やさしく拭きます。落としにくい汚れがある場合は、固く絞った布で拭き取ります。ベンゼ

ン、アルコール、シンナー、アンモニア、研磨剤を含む洗剤またはその他腐食性のある洗剤

や高圧洗浄機を使用しないでください。これらの使用により修理不可能な損害を受けた

り、表面に落ちない痕が残る可能性があります。

6. 製品が倒れたり、床に落ちることで重大な損傷につながる可能性がありますので、揺れる

など不安定な机、棚またはカートの上に置かないでください。また、動いている車内での使

用や持続的に振動している場所への設置も避けてください。

7. 耐水性ではありません。水に近い場所で使用しないようにしてください。

8. 本体ケースは分解しないでください。

9. オーディオの音量を上げ過ぎると、健康を損なう恐れがあります。オーディオジャックを使

用するまえにボリューム設定が適切か確認してください。

10.使いすぎると視力の低下につながるおそれがあります。30 分使用した後は 10 分間の

休憩を取ることをお勧めします。2 歳未満の幼児にはモニタを見せないでください。2 歳

以上の場合、一日のモニタ使用が 1 時間を超えないようにします。

11.製品保証についての説明

取扱説明書をよくお読みいただき、説明書の操作と注意事項をしっかりと守ってください。この

説明書は大切に保管してください。

使用前に本マニュアルをよくお読みになり、正しく製品をお使いください。本マニュアルは大

切に保管してください。

当社は、本製品にフリーズやエラーが発生しないことを保証しません。保証サービスは、保証

期間内および本製品の正常な使用状況下において発生した故障のみの対応となります。次

の原因により故障が発生した場合、保証サービスは対応できませんのでご了承ください。

(1)製品のバーコードが読み取れない場合。

(2)製品に改造、分解、変更がされていた場合。

(3)モニタ表示とタッチパネルが正常でも外観に異常がある場合。自然劣化、摩耗、擦り傷、色

の変化など。

(4)入力電圧が 5V より高い、または電圧が不安定だったなど、外付け電源の問題により故

障が起きた場合。

(5)ケーブルを間違った方向に挿入または引き抜いたことでケーブルやモニタが損傷するな

ど、使用マニュアルにしたがって操作せずに損傷が生じた場合。

(6)ユーザーの故意、過失に係わらず、モニタに接触またはぶつかってモニタが倒れたり落ち

たりして損傷が生じた場合。

液晶ディスプレイの使用と画素について

モニタ上に異なるパターンの画面が表示される場合、画面の明るさがわずかに不均等になる

ことがあります。液晶ディスプレイの有効画素数は 99.99％以上ですが、表示の際に

0.01％またはそれ以下の画素が表示できないことがあります。当製品には高品質液晶パネル

を採用していますので、暗くなったり黒点や赤点が表示されることがありますが、製品の通

常の使用には影響はありません。

モニタの破損につながることがありますので、液晶モニタは長時間直射日光に当たらないよ

うにしてください。

長時間同じ静止画面を表示すると、モニタに残像が残ることがありますが、数時間電源を切

ることで元に戻ります。

WEEE マークについて

当製品は適切な回収場所に委託してリサイクルを行い、家庭ごみと一緒にしない

でください。

製品や付属品、説明書にこのマークがある場合、当該製品およびその他電子部

品（例：充電器、Rear Dock ケーブル）は家庭ごみと一緒に処分できません。廃

棄したい製品と付属品を指定の回収場所へ責任を持って委託し、廃棄電子機器資源をリサイ

クルしてください。

設備の処理または廃棄に関するリサイクル情報については、お近くの代理店、一般廃棄物処

理センター、またはご購入いただいた店舗までお問い合わせください。

EU 以外のリサイクル処理

EU 以外の場所で本製品やその付属品を処分される場合は、現地政府所定の法規と廃品

回収の規範にしたがってください。

第一章内容物の解説

その１．モニタ本体と付属品

1. 各部の説明

図： On-Lap 1503 ボタンと LED ランプ説明

図： On-Lap 1503 入力ポート接続説明

図： On-Lap 1503E 裏側説明図： On-Lap 1503H/I 裏側説明

図： On-Lap 1503H/I 表側

説明

ページを読み込んでいます...

Gechic On-Lap 1503E ユーザーマニュアル

ブランド: Gechic

モデル: On-Lap 1503E

タイプ: ユーザーマニュアル

このマニュアルは次のような方にも適しています

PDFをダウンロード

報告

他の言語で

English: Gechic On-Lap 1503E User manual

Gechic On-Lap 1503E ユーザーマニュアル

このマニュアルは次のような方にも適しています

Gechic On-Lap 1503E ユーザーマニュアル

他の言語で

その他の書類