INNOCN 27C1U-D インストールガイド

27C1U-D

English

[email protected]

Contents

Precautions

Package Content

Installation

Adjustment of monitor

Instructions for use

OSD menu

Speciﬁcation

Common troubleshooting

Warranty Information

Contact us

1

2

3

5

10

7

11

12

5

English

[email protected]

1

Precautions

Keep the monitor away from water sources or damp places, such as bath rooms, kitchens,

basements and swimming pools.

Make sure the monitor is placed on a ﬂat surface. If the monitor falls down, it may cause human

injury or device damage.

Store and use the monitor in a cool, dry and well ventilated place, and keep it away from emission

and heat sources.

Do not cover or block the vent hole in the rear casing, and do not use the product on a bed,sofa,

blanket or similar objects.

The range of the supply voltage of the monitor is printed on the label on the rear casing.If it is

impossible to determine the supply voltage, please consult the distributor or local power

company.

If the monitor will not be used for a long period, please cut oﬀ the power supply to avoid electric

shock in rainy days and damage due to abnormal supply voltage.

Please use a reliable grounded socket,Do not overload the socket, or it may cause ﬁre or electric

shock.

Do not put foreign matters into the monitor, or it may cause short circuits resulting ﬁre or electric

shock.

Do not disassemble or repair this product by self to avoid electric shock. If faults occur, please

contact the after-sales service directly.

Do not pull or twist the power cable forcedly.

There is a polarizer layer (not a protective ﬁlm) on the surface of the screen. Do not peel it oﬀ, or

the product may be damaged and the warranty will be invalid.

English

[email protected]

2

Package Content

Packing list

Please check that the package of the monitor contains all parts. If any part is lost, please contact

the distributor.

The color and shape of parts may vary with models. Figures in this User Manual are for reference only.

Cables supplied may vary with purchased products. Figures in this User Manual are for reference only.

Display screen Stand Base

HDMI Cable

QSG

27C1U-D

Quick Installation Guide

使用产品前请仔细阅读本说明书，并妥善保管

Before using this product, please read this User Manual carefully and keep it well

本製品をご使用になる前に、本ユーザーマニュアルをよくお読みになり、大切に保管してください

Veuillez, avant d'utiliser ce produit, lire attentivement ce manuel et le conserver en lieu sûr

Lesen Sie vor Verwendung dieses Produkts sorgfältig die Bedienungsanleitung und bewahren Sie sie gut auf

Warranty Card

Need Help? We are here!

Contact Us

service@innocn. com

Home Page

www.innocn.com

We are fully dedicated to your 100 % satisfactio n.

Please do not return this produc t back to the store direc tly. We are always

here to help! Innocn provides 1 Year Warranty.If you have any questions using

the product, please contact our surppor t team.We will resolve your prob lem

over online chat or email, pr ovice replacement product or warranty repair.

Power Cable Type-C Cable

English

[email protected]

3

Installation

Installation of base

Note: During standing of the monitor, do not take out the monitor from foams, and do not pinch

the liquid crystal screen with hand to avoid damage to the screen.

English

[email protected]

4

English

[email protected]

5

Instructions for use

Cable connection：

* The bottom interface conﬁguration at the back of the monitor varies with products.

* Note: If the power cable or signal cable is damaged, you must replace it with special soft cables or

special components purchased from the manufacture or maintenance department.

OR

AUDIO OUT

Connect audio outputting

devices such as earphones

to the AUDIO OUT port.

DP interface

Use the DP cable to

connect the DP IN port of

the product to the DP

OUT port of a PC.

HDMI interface

Use the HDMI-DVI cable

(not included) to connect

the HDMI IN port of the

product to the DVI OUT

port of a PC.

Use the HDMI cable to

connect the HDMI IN port

of the product to the

HDMI OUT port of a PC

Adjustment of monitor

Please connect the power cable

plug to the corresponding port

of the monitor, and connect the

other end to a properly

grounded power outlet.

AC IN interface

Type-C interface

A Type-C line can be used

to connect to data ports of

machines and external

terminals.

English

[email protected]

6

Instructions for use

Description of buttons

Explanation of indicator light

1 2 3 4 5

6

6. Indicator light: If the white light is normally on, it is indicated that the device is powered on, and

that the monitor is running normally. red light indicates no video signal detected or low voltage.

Please make sure that your computer is turned on and all video cables are fully plugged in and/or

connected.

Menu button: Press to enter sub-menus/ quickly enter the main menu

Down button: Press to move down in the menu/quickly adjust the brightness

Up button: Press to move up in the menu/quickly adjust the volume

Exit/hot key: Press to return to the previous menu/quickly switch input signals of the port

Power button: Press to turn on/oﬀ the monitor

Button Function

1

2

3

4

5

English

[email protected]

7

1 2 3 4 5

OSD menu

Enter the main menu

Adjust the brightness

Adjust the volume

Switch port input signal

Power ON/OFF

1

2

3

4

5

Menu description

The color and shape of the OSD menu of the actual computer may be slightly diﬀerent from them

shown in the ﬁgure.

Speciﬁcations of the OSD menu may change with improvements of functions without prior notice.

The screen display (OSD) menu can be used to adjust settings of the monitor and is shown on the

screen after the monitor is powered on and the button is pressed.

1. Press one of the buttons ( ) to activate the browser screen.

When booting for the ﬁrst time, you need to set the default language of the monitor menu.

Press buttons ( ) to select the language to be set, and press the OK button( ) to conﬁrm.

English

[email protected]

8

English

[email protected]

9

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference,

(2) this device must accept any interference received, including interference that may cause undesired

operation.

CAN ICES-3 (B)/NMB-3(B)

English

[email protected]

10

LCD Monitor

27B2U-C

27C1U-D

27

inch

(69cm)

16:9

178°(H)/178°(V)

155.4 (H) × 155.4(V)um

1000:1(TYP)

1.07B

3840 x 2160

60Hz

100-240V~ 50/60Hz, 2.0A

The standard voltage and power supply may vary with countries,

please refer to the label at the back of the product.

613.3x57.2x367.3mm

approx.

3.71kg

613.3x194.3x543.4mm

approx.

5.68kg

Forward tilting

-5°/

Backward tilting

+20°

120mm

-45°/+45°

-90°/+90°

Temperature

：0℃~40℃（32℉~104℉）

Humidity

：10%~90% RH（

non-condensing

）

Temperature

：-20℃~60℃（-4℉~140℉）

Humidity

：5%~95% RH（

non-condensing

）

Without base

With base

Action

Storage

Product Name

Product Model

Product Code

Screen Size

Aspect Ratio

Viewing Angle

Pixel pitch

Contrast ratio

Color

Resolution

Refresh Rate

Power Input

Product

Dimentions

(with Height range)

Tilting angle

Height range

Rotation angle

Vertical angle

Environmental

conditions

English

Common troubleshooting

Common Symptoms Possible Solutions

The following table contains general information about common monitor problems you might encounter

and the possible solutions.

• Ensure that the video cable connecting the monitor and the computer is properly connected

and secure.

• Make sure if the operating system had entered hibernation, sleep or power-save mode. Press

any key (Enter key / Power key) or move the mouse to wake it up.

• Check for bent or broken pins in the video cable connector.

• Ensure that the correct input source is selected in the Input Source menu.

• Replace other identical signal cable (HDMI / DisplayPort) to take cross-test.

No display after turning monitor

ON (screen is black but power s

upply lights is ON)

• Verify that the power outlet is functioning properly using any other electrical equipment.

• Make sure the power button on the front panel is normal for boot and pressed fully.

• Check for bent or broken pins in the video cable connector.

No display after turning monitor

ON (not boot, black screen & no

power lights)

• Eliminate video extension cables.

• Reset the monitor to factory settings.

• Change the video resolution to the correct resolution and aspect ratio.

• If the words are still blurry, please try enabling or disabling CLEAR TYPE function from windows

Poor Focus. Picture is fuzzy,

blurry, or ghosting

• Cycle power On-Oﬀ.

• Pixel that is permanently Oﬀ is a natural defect that can occur in LCD technology.

• For more information on Dell Monitor Quality and Pixel Policy, see INNOCN Support site

at: http://www.innocn.com

Missing Pixels. LCD screen has

spots

• Do not perform any troubleshooting steps.

• Contact INNOCN immediately.

Safety Related Issues

(Visible signs of smoke or sparks)

• Check the resolution setting in your PC

• Reset the monitor to factory settings.

• Make sure the device was not set to “Care Eyes mode”

• Check here: OSD→Picture Setting→Contextual mode→Care Eyes mode

• Press only one key at a time.

• Restart the computer

• Make sure to have a valid video signal going through the monitor before

you can turn on the OSD

• Make sure the “contextual mode”is OFF before setting brightness and contrast ratio.

• Check here: OSD→Picture Setting→Contextual mode→oﬀ

The screen appears yellow

Control panel keys do not work

I cannot adjust the brightness/

contrast ratio through OSD

• Make sure your video card supports that feature.

• Also make sure you are using DisplayPort to connect from your computer to your monitor.

• Not every computer/phone ‘s USB Type-C port will support video out signals. Please check

your cable and your computer/phone to make sure those will support a video signal.our monitor.

• Check to see if you plugged a USB-B uplink cable(included in the package) from your computer

to the monitor’s USB-B port. Without an uplink cable to the computer, the USB ports on the back

of the monitor will not work.

• Check that your monitor is turned On.

• Reconnect the uplink cable to your computer.

• Reconnect the USB peripherals(downstream connector).

• Switch Oﬀ and then turn On the monitor again.

• Reboot the computer.

• Some USB devices like external portable HDD require higher electric current; connect the device

directly to the computer system.

I cannot get higher refresh rate

on my monitor

After plugged in USB Type-C

from computer to monitor,

there is no video

USB interface is not working

• Check the Aspect Ratio setting in the Display menu OSD.Image is centered on screen, but

does not ﬁll entire viewing area

11

[email protected]

Warranty Information

1. What is covered in your warranty?

2. Contact us

3. This Warranty is not applicable:

1.The product is not purchased from an Authorized Innocn dealer.

2.The product is not used according to instructions given in the instruction manual.

3.Defects caused by improper use as determined by company personnel.

4.Modiﬁcation or alteration of any nature is made in the electrical circuitry / or physical construction of

the set.

5.Installation / repair work is carried out by persons / agency other than authorized by the company.

6.The original serial number is removed, obliterated or altered from the machine or cabinet.

7.Accidents, Acts of God, lightning, water, ﬁre, public disturbances, improper ventilation, voltage

ﬂuctuations or any cause beyond the control of Innocn.

Item

Monitor

Warranty term

1 Year

Service Email

Service Website

[email protected]

http://www.innocn.com

Contact us

Thank you for choosing Innocn® !

We hope the Innocn® product you purchased will serve you well. To ensure safety and trouble-free

operation of your device, please read the user guide carefully and keep it for future needs.

Please email us for customer service & technical support at [email protected].

We recommend you go online to our homepage for the most up-to-date guidance for your product.

registering Innocn membership; refering to warranty information.

http://www.innocn.com

12

English

简体中文

1

2

3

注意事项

产品介绍

安装

调整显示

使用

OSD菜单

基本参数

常见故障排查

保修说明

联系我们

5

10

7

11

12

5

简体中文

注意事项

请勿靠近水源或潮湿的地方，如浴室、厨房、地下室、游泳池等。

确保设备安装放置在平稳处，若掉落，可能产生人身伤害或设备损坏。

在阴凉、干燥、通风处存放、使用，请勿靠近辐射源和热源。

请勿覆盖、堵塞后壳上的通风孔，请勿置于床、沙发、毛毯或类似物体表面使用。

设备操作的电源电压范围标示于后壳标签上。若不能确认所供应的电压，可洽询经销商或当地的电力公司。

当设备长期不使用，请切断电源，防止在雷雨天受到电击以及异常电源电压的损伤。

请使用可靠接地插座，勿让插座过载，否则会引起火灾或电击。

请勿把异物放入机内，否则可能会引起短路而导致火灾或电击。

请勿自行拆卸，维修本产品，以免发生电击危险，若有故障，请直接与售后服务人员联系。

请勿过度拉扯、扭曲电源线。

屏幕表面附有一层偏光片（非保护膜），请勿撕除，否则会损坏产品且无法保修。

1

简体中文

包装清单

请检查所有物品是否包含在您的显示器包装中，如有丢失配件，请联系您的经销商。

显示器主机支架底座

HDMI信号线

配件的颜色和形状可能随型号的不同而有所变化，具体以您收到的实物为准。

根据所购产品的不同，提供的线材可能会有所不同，具体以收到的实际线材为准。

产品介绍

Type-C信号线

简易说明书校色报告

电源线

2

27C1U-D

Quick Installation Guide

使用产品前请仔细阅读本说明书，并妥善保管

Before using this product, please read this User Manual carefully and keep it well

本製品をご使用になる前に、本ユーザーマニュアルをよくお読みになり、大切に保管してください

Veuillez, avant d'utiliser ce produit, lire attentivement ce manuel et le conserver en lieu sûr

Lesen Sie vor Verwendung dieses Produkts sorgfältig die Bedienungsanleitung und bewahren Sie sie gut auf

简体中文

底座安装

安装

底座安装

安装

3

简体中文

4

简体中文

5

线缆连接：

* 显示器背面的底部接口配置根据产品不同而异。

* 注意：如果电源线或信号线损坏，必须用专用软线或从其制造商或维修部买到的专用组件来更换。

使用HDMI信号线，将产品的

HDMI IN接口连接到PC的

HDMI OUT 接口。

使用HDMI-DVI信号线，将产

品的HDMI IN接口连接到PC的

DVI OUT接口。

HDMI接口

将耳机等音频输出设备

连接到AUDIO OUT接口。

AUDIO OUT

OR

将耳机等音频输出设备

连接到AUDIO OUT接口。

AUDIO OUT

OR

使用DP信号线，将产品

的DP IN接口连接到PC

的DP OUT 接口。

DP接口

使用DP信号线，将产品

的DP IN接口连接到PC

的DP OUT 接口。

DP接口

使用

调整显示

请将电源线连接显示器对应

电源接口上，将另一端连接到

正确接地的电源插座。

AC IN接口

使用Type-C线可以连接

到机器数据端口和外部

终端设备。

Type-C接口

使用Type-C线可以连接

到机器数据端口和外部

终端设备。

Type-C接口

ページが読み込まれています...

INNOCN 27C1U-D インストールガイド

INNOCN 27C1U-D インストールガイド

他の言語で

関連論文

その他のドキュメント