13K1F
Portable Monitor
Quick Start Guide
Thank you for choosing Innocn® !
We hope the Innocn® product you purchased will serve you well. To ensure safety and
trouble-free operation of your device, please read the user guide carefully and keep it for
future needs.
Please email us for customer service & technical support at [email protected].
We recommend you go online to our homepage for the most up-to-date guidance for your
product.registering Innocn membership; refering to warranty information.
http://www.innocn.com
1
English
Safety Precautions
1. Read all warnings and follow all instructions. Keep this user guide for later reference.
2. Do not use this device near water. To reduce the risk of fire or electric shock, do not
expose the device to moisture.
3. Do not place the device on an uneven or unstable surface. The device may fall over
resulting in an injury ormalfunction.
4. Avoid exposing the device to direct sunlight or other sources of sustained heat.
5. Always use genuine INNOCN components to ensure safety and product performance.
6. To avoid the risk of electric shock or component damage, switch off the power before
connecting other components to the display.
7. Disconnect the power plug from the AC outlet if the device will not be used for a long
period of time.
8. When connecting to a power outlet, DO NOT remove the grounding prong. Please
ensure grounding prongs are NEVER REMOVED.
9. Place the device in a well-ventilated area. Do not place anything on the device that
prevents heat dissipation.
10. The power adaptor must be replaced when using different voltage from that specified in
the User Guide. For more information, please contact us.
11. Do not overload power strips and extension cords. Overloading can result in fire or
electric shock.
12. Do not apply pressure to the screen. Excessive pressure may cause permanent
damage to the display.
13. Plastic bags can be dangerous. Keep plastic bags away from babies and children to
avoid danger of suffocation.
14. Do not attempt to repair the product by yourself. Opening the back cover may expose
you to high voltages, the risk of electric shock, and other hazards. If repair is required,
please contact us anytime. ([email protected])
15. If there are visual smoke or sparks, unplug the power cord and contact us
([email protected]). Do not try to repair the product yourself.
16. To avoid risk of electric shock, do not touch the power plug and ports with wet hands.
2
English
Table of Contents
4
4
4
5
6
Troubleshooting(FAQ)
11
10
Warranty Information 12
Product Specification
Packaging List
Key Instruction
Input Connector
OSD(On-Screen Display) Menu
Product Instruction
3
English
Packaging List
Product Instruction
Key Instruction
Up key
Down key
N2F
快速安装指南
便携显示器
Type-C data cable x1
Quick Start Guide
Monitor x1 Mini HDMI cable x1
Power Button LED Indicator 1
2
3
4
Stand x1
4
English
Power Button:
Long press (3s) the button to turn the monitor on / off.
Short press the button to open the OSD menu / enter
sub-menus.
Long press (1s) the button to return to previous menu.
LED Indicator:
Blue: Working
Orange: Standby mode (no signal detected)
Dark: Power off
Up key:
In the OSD menu: press the up-key to move left in the
menu / turn up the progress bar.
Without OSD menu: press the up-key to pop up the
volume shortcut, then press to increase volume.
Down key:
In the OSD menu: press the down-key to move right
in the menu / turn down the progress bar.
Without OSD menu: press the down-key to pop up
the volume shortcut, then press to decrease volume.
Product Instruction
Input Connector
Notes:
1. Since most of device can light up the monitor directly with Type-C cable connected, the
power adapter is not included. If you need an power adapter, please use 5V/2.5A, 5V/3A,
5V/4.5A or above power consumption.
2. If a faulty or damaged cable is delivered with the machine, please be sure to replace it
with the original cable from the dealer or manufacturer.
Type-CType-CHDMI
(optional)
5
English
TYPE-C
OSD(On-Screen Display) Menu
Home Adjust Brightness,Contrast,Volume
Profiles 6 Profiles are available
Color temperature Under USER mode, the R G B can be adjusted
Color Adjust the chrominance color saturation sharpness
Eye protection When it is selected, the background color of the eye
protection icon turns blue. Select the eye protection level.
TYPE-C When selected, signal source is Type-C
HDMI When selected, signal source is HDMI
Reset When selected, restore factory settings
EXIT When clicked, OSD menu disappears
1920*1080@60Hz
30 80 50
Press the menu key in the power-on state. The main menu (OSD) is displayed.
6
English
Home
Profiles
1920*1080@60Hz
30 80 50
Press the up and down keys to adjust brightness, contrast ratio, and sound
Press the up and down keys to select modes: Standard, Text, Movie, Game, Adobe RGB、
sRGB
7
English
1920*1080@60Hz
Color temperature
Color
1920*1080@60Hz
75
50
35
1920*1080@60Hz
30 80 50
Press the up and down keys to adjust chroma, saturation, sharpness.
Select the USER mode to adjust RGB value.
8
English
Other icons
1920*1080@60Hz
4
1920*1080@60Hz
30 80 50
Eye protection level
9
English
Common Symptoms Possible Solutions
Troubleshooting
The following table contains general information about common monitor problems you
might encounter and the possible solutions.
• Ensure that the video cable connecting the monitor and the
computer is properly connected and secure.
• Make sure if the operating system had entered hibernation,
sleep or power-save mode. Press any key (Enter key /
Power key) or move the mouse to wake it up.
• Check for bent or broken pins in the video cable connector.
• Ensure that the correct input source is selected in the Input
Source menu.
• Replace other identical signal cable (HDMI / Type-C) to
take cross-test.
Attention: Not every computer/phone ‘s USB Type-C port
will support video out signals. Please check your cable and
your computer/phone to make sure those will support a
video signal.
No display after turning
monitor ON (screen is black
but power supply lights is ON)
• Verify that the power outlet is functioning properly using
any other electrical equipment. If your device has battery,
make sure it’s not out of battery.
• Make sure the power button is pressed fully and hold for 5s.
No display after turning monitor
ON (not boot, black screen &
no power lights)
• Cycle power On-Off.
• Pixel that is permanently Off is a natural defect that can
occur in OLED technology.
• For more information on Innocn Monitor Quality and Pixel
Policy, see Innocn warranty information at:
http://www.innocn.com.
Missing Pixels. OLED screen
has spots
• Do not perform any troubleshooting steps.
• Contact Innocn immediately.
Safety Related Issues (Visible
signs of smoke or sparks)
• Check the resolution setting in your PC.Image does not fill entire
viewing area.
• Press only one key at a time.
• Make sure to have a valid video signal going through the
monitor before you can turn on the OSD.
Control panel keys do not work
• Make sure the device was not set to “Eyes Care mode”
• Check here: OSD→
The screen appears yellow
• Make sure the device was set to “custom mode”
• Check here: OSD→ →
I cannot adjust the brightness/
contrast ratio/ color saturation
through OSD
10
English
13K1F
2*1.5W
60Hz
N/A
1,074M(RGB 8bit+2FRC)
100000:1
Type-C*2Mini HDMI*1
308.8*202.7mm
630g
13.3”
DC 20V 1.5A
OLED
1920*1080P
7.1mm
400cd/m2
0 45
NO
INNOCN 13.3" portable monitor
Product Specification
Product Name
Product Model
Screen Size
Screen Type
Resolution
Brightness (Typ.)
Touchable
Speaker
Refresh Rate
Color Gamut
Display Colors
Contrast (Typ.)
Digital Input
Phys. Dimension
Phys. Thickness
Net weight
Voltage Rating
Operating Temp.
11
English
Warranty Information
1What is covered in your warranty?
2Contact us
3.Members only
Signing up to become our members, to exchange new one without repair in one year.
4. This Warranty is not applicable:
1.The product is not purchased from an Authorized Innocn dealer.
2.The product is not used according to instructions given in the instruction manual.
3.Defects caused by improper use as determined by company personnel.
4.Modification or alteration of any nature is made in the electrical circuitry / or physical
construction of the set.
5.Installation / repair work is carried out by persons / agency other than authorized by the
company.
6.The original serial number is removed, obliterated or altered from the machine or cabinet.
7.Accidents, Acts of God, lightning, water, fire, public disturbances, improper ventilation,
voltage fluctuations or any cause beyond the control of Innocn.
Item
Monitor
Panel
Warranty term
3 Years
1 Years
Battery 1 Years
Service Email
Service Website
http://www.innocn.com
Register website
QR code
https://www.innocn.com/user/register
12
English
1
注意事项
请勿覆盖、堵塞后壳上的通风孔，请勿置于床、沙发、毛毯或类似物体表面使用。
设备操作的电源电压范围标示于后壳标签上。若不能确认所供应的电压，可洽询经销商或
当地的电力公司。
当设备长期不使用，请切断电源，防止在雷雨天受到电击以及异常电源电压的损伤。
请勿靠近水源或潮湿的地方，如浴室、厨房、地下室、游泳池等。
确保设备安装放置在平稳处，若掉落，可能产生人身伤害或设备损坏。
在阴凉、干燥、通风处存放、使用，请勿靠近辐射源和热源。
请勿让插座过载，否则会引起火灾或电击。
请勿把异物放入机内，否则可能会引起短路而导致火灾或电击。
请勿自行拆卸、维修本产品。若有故障，请直接与售后服务人员联系。
请勿过度拉扯、扭曲信号线和数据线。
中文
2
使用产品前请仔细阅读本说明书，并妥善保管
3
3
3
4
5
10
9
11
11
12
目录
使用
包装清单
功能按键介绍
连接方式
菜单说明
故障排除
中国能源效率标识
产品中有害物质的名称及含量
保修说明
基本参数
中文
包装清单
使用
按键说明
上键
下键
电源指示灯
Type-C数据线×1
快速安装指南
N2F
快速安装指南
便携显示器
支架 x1
便携显示器×1
1
2
3
4
电源按键:
长按3S后开关机；
上下按键调出音量音量快捷键后，按电源键
实现退出功能；
按电源键可调菜单；
长按1s返回上一级
电源指示灯:
有信号时蓝灯，无信号时红灯（橙灯），关机
按键灯熄灭
上键:
有OSD时，向左选择功能或调大进度条；
无OSD时，调出音量快捷，再按调大进度条
下键:
有OSD时，向右选择功能或调大进度条；
无OSD时，调出音量快捷，再按调小进度条
电源按键
Mini HDMI信号线×1
中文
3
注意:
1. 本机适配器不是标配，需要单独向商家购买，或者使用自有的功率够的PD适配器。
2. 如果机器附带线材有不良或者损坏，请务必找经销商或者制造商更换原厂线材。
Type-CType-CHDMI
使用
连接方式
(选配)
中文
4
TYPE-C
菜单说明
开机状态下且无任何菜单按下菜单键, 弹出主菜单(OSD)
主页 选中时主页图标底色变蓝，且矩形框显示亮度、对比度、声音选项。
情景模式 选中时情景模式图标底色变蓝，且矩形框显示情景模式子选项，点击
图标选择需要的模式。
色温 选中时色温图标底色变蓝，且矩形框显示色温子选项，点击图标选择
需要的色温，当色温为User 时R、G、B 选项激活，滑动图标调节
RGB的大小。
色彩 选中时色彩图标底色变蓝，且矩形框显示色度、饱和度、锐利度选项。
护眼 选中时护眼图标底色变蓝，选择护眼等级。
TYPE-C 选中时TYPE-C图标底色变蓝，信号切换为TYPE-C口。
HDMI 选中时HDMI图标底色变蓝，信号切换为HDMI口。
复位 选中复位图标，系统初始化。
退出 选中时退出图标底色变蓝，主页消失。
中文
5
1920*1080@60Hz
30 80 50
主页
按上下键调节亮度、对比度、声音
情景模式
按上下键可选中模式：标准、文本、电影、游戏、Adobe RGB、sRGB
1920*1080@60Hz
30 80 50
1920*1080@60Hz
中文
6
按上下键调节色度、饱和度、锐利度
选中USER模式，可调整RGB数值
色温
色彩
1920*1080@60Hz
75
50
35
1920*1080@60Hz
30 80 50
中文
7
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
/
