ページを読み込んでいます...
FCC Compliance Statement:
This equipment has been tested and found to
comply with limits for a Class B digital device ,
pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable
protection against harmful interference in
residential installations. This equipment
generates, uses, and can radiate radio
frequency energy, and if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause interference to radio or
television equipment reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Move the equipment away from the receiver
-Plug the equipment into an outlet on a circuit different from that to which
the receiver is connected
-Consult the dealer or an experienced radio/television technician for
additional suggestions
You are cautioned that any change or modifications to the equipment not
expressly approve by the party responsible for compliance could void Your
authority to operate such equipment.
This device complies with Part 15 of the FCC Rules. Operation is subjected to
the following two conditions 1) this device may not cause harmful interference
and 2) this device must accept any interference received, including interference
that may cause undesired operation.
DECLARATION OF CONFORMITY
Per FCC Part 2 Section 2. 1077(a)
Responsible Party Name: G.B.T. INC.
Address: 18305 Valley Blvd., Suite#A
LA Puent, CA 91744
Phone/Fax No: (818) 854-9338/ (818) 854-9339
hereby declare s that the product
Product Name:
Model Number:
Mother Board
Conforms to the following specifications:
FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a),
Class B Digital Device
Supplementary Information:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful
and (2) this device must accept any inference received, including
that may cause undesired operation.
Representative Person's Name: ERIC LU
Signature:
Date: Mar. 24, 2000
Eric Lu
GA-7VX
Declaration of Conformity
We, Manufacturer/Importer
(full address)
G.B.T. Technology Träding GMbH
Ausschlager Weg 41, 1F, 20537 Hamburg, Germany
declare that the product
( description of the apparatus, system, installation to which it refers)
Mother Board
GA-7VX
is in conformity with
(reference to the specification under which conformity is declared)
in accordance with 89/336 EEC-EMC Directive
EN 55011 Limits and methods of measurement EN 61000-3-2* Disturbances in supply systems caused
of radio disturbance characteristics of EN60555-2 by household appliances and similar
industrial, scientific and medical (ISM electrical equipment “Harmonics”
high frequency equipment
EN55013 Limits and methods of measurement EN61000-3-3* Disturbances in supply systems caused
of radio disturbance characteristics of EN60555-3 by household appliances and similar
broadcast receivers and associated electrical equipment “Voltage fluctuations”
equipment
EN 55014 Limits and methods of measurement EN 50081-1 Generic emission standard Part 1:
of radio disturbance characteristics of Residual, commercial and light industry
household electrical appliances,
portable tools and similar electrical EN 50082-1 Generic immunity standard Part 1:
apparatus Residual, commercial and light industry
EN 55015 Limits and methods of measurement EN 55081-2 Generic emission standard Part 2:
of radio disturbance characteristics of Industrial environment
fluorescent lamps and luminaries
EN 55020 Immunity from radio interference of EN 55082-2 Generic immunity standard Part 2:
broadcast receivers and associated Industrial environment
equipment
EN 55022 Limits and methods of measurement ENV 55104 Immunity requirements for household
of radio disturbance characteristics of appliances tools and similar apparatus
information technology equipment
DIN VDE 0855 Cabled distribution systems; Equipment EN 50091- 2 EMC requirements for uninterruptible
part 10 for receiving and/or distribution from power systems (UPS)
part 12 sound and television signals
CE marking (EC conformity marking)
The manufacturer also declares the conformity of above mentioned product
with the actual required safety standards in accordance with LVD 73/23 EEC
EN 60065 Safety requirements for mains operated EN 60950 Safety for information technology equipment
electronic and related apparatus for including electrical business equipment
household and similar general use
EN 60335 Safety of household and similar EN 50091-1 General and Safety requirements for
electrical appliances uninterruptible power systems (UPS)
Manufacturer/Importer
Signature : Rex Lin
(Stamp) Date : Mar. 24, 2000 Name : Rex Lin
R-10-01-000406C
7VX
AMDTM Athlon AGP
AMDTM Athlon
REV. 1.0 First Edition
:
1)
2)
3)
4)
5)
6) Suspend to RAM & Dual BIOS STR & Dual BIOS
7) Four Speaker & SPDIF Four Speaker & SPDIF
8) BIOS BIOS
9)
P.1
P.2
P.3
7VX P.5
P.6
P.22
P.23
Suspend to RAM P.24
BIOS(Dual BIOS) ( ) P.30
Four Speaker & SPDIF ( ) P.37
P.42
BIOS P.43
P.73
7VX
1
1.0 7VX Apr.2000
2000 04 06
2
þ 7VX
þ
þ (TUCD)
o COM B ( )
o USB ( )
o SCSI
þ 7VX
7VX
3
Ÿ 30.6 cm x 22 cm ATX size form factor, 4 layers PCB.
Ÿ 7VX 7VX, 7VX-1
CPU Ÿ AMD Athlon (K7) Slot A Processor
Ÿ 512 KB 2nd CPU
Ÿ Supports 500MHz ~ 1GHz and faster
Apollo KX133 ,consisting of:
Ÿ VIA8371 Memory/AGP/PCI Controller(PAC)
Ÿ VT82C686A PCI Super-I/O Integrated Peripheral Controller
(PSIPC)
Ÿ 100~143MHz
Ÿ 3 168-pin DIMM
Ÿ SDRAM up to 1.5GB
Ÿ 3.3V SDRAM DIMM, PC-133 supported
I/O Ÿ VT82C686A
Ÿ 1 AGP (Accelerated Graphics Port) slot
- AGP 66 / 133 MHz, 3.3V/1.5V device support
Ÿ 5 32-bit PCI Bus
Ÿ 1 16-bit ISA Bus ( )
Ÿ 1 AMR
IDE Ÿ IDE VT82C686A PCI , PIO,
Bus Master (Ultra DMA/33 ATA 66) IDE
HDD/CD-ROM
Ÿ IDE
Ÿ 1
(360K ,720K ,1.2M ,1.44M 2.88M bytes)
Ÿ 1 SPP/EPP/ECP
Ÿ 2 (COM A & COM B)
Ÿ 4 USB
Ÿ 1 ( IR ) ( )
( ) Ÿ CPU/
Ÿ
Ÿ CPU
Ÿ
Ÿ Creative CT5880 sound ( )
Ÿ AC’97 CODEC
Ÿ Line In/Line Out/Mic In/AUX In/CD In/TEL/Game Port
4
SPDIF and Four Speaker( ) …
7VX Motherboard
5
PS/2 Ÿ PS/2 PS/2
BIOS Ÿ AMI BIOS, 2M bit FLASH ROM
Ÿ Support Dual BIOS( )
Ÿ /
Ÿ AC back
7VX
5
7VX
7VX
DIMM 1
DIMM 2
PCI 1
PCI 2
PCI 3
VT82C
686A
AC97
VT8371
ATX POWER
GAME & AUDIO
COM2 COM1
LPT
PS/2
USB
MAIN
BIOS
JP5
JP4
J14
J2
J5
J10
J6
IDE2 FDD1
IDE1
CPU
DIMM 3
AGP 1 J3
JP6
J4
USB2
J1
BAT1
JP2
JP3
LED1
SW4
AMR 1
JP7
PCI 4
PCI 5
I SA1
J15
J11
JP8
JP9 JP14
JP1
BACK
BIOS
CT5880
7VX
6
7VX Motherboard
7
$
CPU / Page
CPU P.7
P.8
P.8
COM 1 / COM 2 / LPT P.8
USB P.9
PS/2 PS/2 P.9
J10 ( ) P.10
J5 (CPU ) P.10
J6 ( ) P.11
ATX P.11
Floppy ( ) P.12
IDE 1 / IDE 2 P.12
USB2 (USB ) P.13
IR ( ) P.13
JP3 (STR & LED1: DIMM LED) P.14
J3 ( ) P.14
J4 ( ) P.15
J15 (TEL) ( ) P.15
J11 (AUX_IN ) P.16
J14 (CD Audio Line In) ( ) P.16
P.17
J2 (2x11 Pins ) P.17
JP2 (BIOS ) P.18
JP6 ( USB ) P.18
JP5 ( USB ) P.19
JP4 (STR ) P.19
JP7/JP8/JP9 ( AC97& AMR ) ( ) P.20
JP1 ( CMOS ) ( ) P.20
JP14 ( )( ) P.21
7VX
8
7VX
7
CPU
100~143MHz(SW4)CPU
SW4: O : ON, X :
OFF 4 3 2 1 CPU PCI Spectrum
X X X X 133.3 33.3 5%
O X X X 100.2 33.3 5%
X O X O 110 36.7 X
O X X O 115 38.3 X
O O X O 120 30 X
X X O X 133.3 33.3 X
O X O X 100.2 33.3 X
X X O O 124 31 X
X O O O 129 32.3 X
O X O O 138 34.5 X
O O O O 143 35.8 X
8
MIC
Game Port
Line In
Line Out
Line Out 1: Line Out or SPDIF (
AC ). ”Line
Out”, ,”SPDIF Out”
(39 ).
Line In: ”Line In”. Creative
“Four Speaker” , (37
) ”Line In” ”Line Out 2”, Line Out 1
Line In. .
COM 1 / COM 2 / LPT
COM 1
COM 2
LPT Port
/