Gigabyte GA-7DXR+ 取扱説明書

FCC Compliance Statement:

This equipment has been tested and found to

comply with limits for a Class B digital device,

pursuant to Part 15 of the FCC rules. These

limits are designed to provide reasonable

protection against harmful interference in

residential installations. This equipment

generates, uses, and can radiate radio

frequency energy, and if not installed and used

in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause interference to radio or

television equipment reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna

-Move the equipment away from the receiver

-Plug the equipment into an outlet on a circuit different from that to which

the receiver is connected

-Consult the dealer or an experienced radio/television technician for

additional suggestions

You are cautioned that any change or modifications to the equipment not

expressly approve by the party responsible for compliance could void Your

authority to operate such equipment.

This device complies with Part 15 of the FCC Rules. Operation is subjected to

the following two conditions 1) this device may not cause harmful interference

and 2) this device must accept any interference received, including interference

that may cause undesired operation.

DECLARATION OF CONFORMITY

Per FCC Part 2 Section 2. 1077(a)

Responsible Party Name: G.B.T. INC. (U.S.A.)

Address: 17358 Railroad Street

City of Industry, CA91748

Phone/Fax No: (818) 854-9338/ (818) 854-9339

hereby declares that the product

Product Name:

Model Number:

Mother Board

Conforms to the following specifications:

FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a),

Class B Digital Device

Supplementary Information:

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful

and (2) this device must accept any inference received, including

that may cause undesired operation.

Representative Person's Name: ERIC LU

Signature:

Date: Dec.14, 2001

Eric Lu

GA-7DXR+

Declaration of Conformity

We, Manufacturer/Importer

(full address)

G.B.T. Technology Träding GMbH

Ausschlager Weg 41, 1F, 20537 Hamburg, Germany

declare that the product

( description of the apparatus, system, installation to which it refers)

Mother Board

GA-7DXR+

is in conformity with

(reference to the specification under which conformity is declared)

in accordance with 89/336 EEC-EMC Directive

EN 55011 Limits and methods of measurement EN 61000-3-2* Disturbances in supply systems caused

of radio disturbance characteristics of EN60555-2 by household appliances and similar

industrial, scientific and medical (ISM electrical equipment “Harmonics”

high frequency equipment

EN55013 Limits and methods of measurement EN61000-3-3* Disturbances in supply systems caused

of radio disturbance characteristics of EN60555-3 by household appliances and similar

broadcast receivers and associated electrical equipment “Voltage fluctuations”

equipment

EN 55014 Limits and methods of measurement EN 50081-1 Generic emission standard Part 1:

of radio disturbance characteristics of Residual, commercial and light industry

household electrical appliances,

portable tools and similar electrical EN 50082-1 Generic immunity standard Part 1:

apparatus Residual, commercial and light industry

EN 55015 Limits and methods of measurement EN 55081-2 Generic emission standard Part 2:

of radio disturbance characteristics of Industrial environment

fluorescent lamps and luminaries

EN 55020 Immunity from radio interference of EN 55082-2 Generic immunity standard Part 2:

broadcast receivers and associated Industrial environment

equipment

EN 55022 Limits and methods of measurement ENV 55104 Immunity requirements for household

of radio disturbance characteristics of appliances tools and similar apparatus

information technology equipment

DIN VDE 0855 Cabled distribution systems; Equipment EN 50091- 2 EMC requirements for uninterruptible

part 10 for receiving and/or distribution from power systems (UPS)

part 12 sound and television signals

CE marking (EC conformity marking)

The manufacturer also declares the conformity of above mentioned product

with the actual required safety standards in accordance with LVD 73/23 EEC

EN 60065 Safety requirements for mains operated EN 60950 Safety for information technology equipment

electronic and related apparatus for including electrical business equipment

household and similar general use

EN 60335 Safety of household and similar EN 50091-1 General and Safety requirements for

electrical appliances uninterruptible power systems (UPS)

Manufacturer/Importer

Signature : Timmy Huang

(Stamp) Date : Dec. 14, 2001 Name : Timmy Huang

FCC Compliance Statement:

This equipment has been tested and found to

comply with limits for a Class B digital device,

pursuant to Part 15 of the FCC rules. These

limits are designed to provide reasonable

protection against harmful interference in

residential installations. This equipment

generates, uses, and can radiate radio

frequency energy, and if not installed and used

in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause interference to radio or

television equipment reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna

-Move the equipment away from the receiver

-Plug the equipment into an outlet on a circuit different from that to which

the receiver is connected

-Consult the dealer or an experienced radio/television technician for

additional suggestions

You are cautioned that any change or modifications to the equipment not

expressly approve by the party responsible for compliance could void Your

authority to operate such equipment.

This device complies with Part 15 of the FCC Rules. Operation is subjected to

the following two conditions 1) this device may not cause harmful interference

and 2) this device must accept any interference received, including interference

that may cause undesired operation.

DECLARATION OF CONFORMITY

Per FCC Part 2 Section 2. 1077(a)

Responsible Party Name: G.B.T. INC. (U.S.A.)

Address: 17358 Railroad Street

City of Industry, CA91748

Phone/Fax No: (818) 854-9338/ (818) 854-9339

hereby declares that the product

Product Name:

Model Number:

Mother Board

Conforms to the following specifications:

FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a),

Class B Digital Device

Supplementary Information:

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful

and (2) this device must accept any inference received, including

that may cause undesired operation.

Representative Person's Name: ERIC LU

Signature:

Date: Jan. 4, 2002

Eric Lu

GA-7DX+

Declaration of Conformity

We, Manufacturer/Importer

(full address)

G.B.T. Technology Träding GMbH

Ausschlager Weg 41, 1F, 20537 Hamburg, Germany

declare that the product

( description of the apparatus, system, installation to which it refers)

Mother Board

GA-7DX+

is in conformity with

(reference to the specification under which conformity is declared)

in accordance with 89/336 EEC-EMC Directive

EN 55011 Limits and methods of measurement EN 61000-3-2* Disturbances in supply systems caused

of radio disturbance characteristics of EN60555-2 by household appliances and similar

industrial, scientific and medical (ISM electrical equipment “Harmonics”

high frequency equipment

EN55013 Limits and methods of measurement EN61000-3-3* Disturbances in supply systems caused

of radio disturbance characteristics of EN60555-3 by household appliances and similar

broadcast receivers and associated electrical equipment “Voltage fluctuations”

equipment

EN 55014 Limits and methods of measurement EN 50081-1 Generic emission standard Part 1:

of radio disturbance characteristics of Residual, commercial and light industry

household electrical appliances,

portable tools and similar electrical EN 50082-1 Generic immunity standard Part 1:

apparatus Residual, commercial and light industry

EN 55015 Limits and methods of measurement EN 55081-2 Generic emission standard Part 2:

of radio disturbance characteristics of Industrial environment

fluorescent lamps and luminaries

EN 55020 Immunity from radio interference of EN 55082-2 Generic immunity standard Part 2:

broadcast receivers and associated Industrial environment

equipment

EN 55022 Limits and methods of measurement ENV 55104 Immunity requirements for household

of radio disturbance characteristics of appliances tools and similar apparatus

information technology equipment

DIN VDE 0855 Cabled distribution systems; Equipment EN 50091- 2 EMC requirements for uninterruptible

part 10 for receiving and/or distribution from power systems (UPS)

part 12 sound and television signals

CE marking (EC conformity marking)

The manufacturer also declares the conformity of above mentioned product

with the actual required safety standards in accordance with LVD 73/23 EEC

EN 60065 Safety requirements for mains operated EN 60950 Safety for information technology equipment

electronic and related apparatus for including electrical business equipment

household and similar general use

EN 60335 Safety of household and similar EN 50091-1 General and Safety requirements for

electrical appliances uninterruptible power systems (UPS)

Manufacturer/Importer

Signature : Timmy Huang

(Stamp) Date : Jan. 4, 2002 Name : Timmy Huang

FCC Compliance Statement:

This equipment has been tested and found to

comply with limits for a Class B digital device,

pursuant to Part 15 of the FCC rules. These

limits are designed to provide reasonable

protection against harmful interference in

residential installations. This equipment

generates, uses, and can radiate radio

frequency energy, and if not installed and used

in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause interference to radio or

television equipment reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna

-Move the equipment away from the receiver

-Plug the equipment into an outlet on a circuit different from that to which

the receiver is connected

-Consult the dealer or an experienced radio/television technician for

additional suggestions

You are cautioned that any change or modifications to the equipment not

expressly approve by the party responsible for compliance could void Your

authority to operate such equipment.

This device complies with Part 15 of the FCC Rules. Operation is subjected to

the following two conditions 1) this device may not cause harmful interference

and 2) this device must accept any interference received, including interference

that may cause undesired operation.

DECLARATION OF CONFORMITY

Per FCC Part 2 Section 2. 1077(a)

Responsible Party Name: G.B.T. INC. (U.S.A.)

Address: 17358 Railroad Street

City of Industry, CA91748

Phone/Fax No: (818) 854-9338/ (818) 854-9339

hereby declares that the product

Product Name:

Model Number:

Mother Board

Conforms to the following specifications:

FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a),

Class B Digital Device

Supplementary Information:

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful

and (2) this device must accept any inference received, including

that may cause undesired operation.

Representative Person's Name: ERIC LU

Signature:

Date: Mar. 22, 2002

Eric Lu

GA-7DXE

Declaration of Conformity

We, Manufacturer/Importer

(full address)

G.B.T. Technology Träding GMbH

Ausschlager Weg 41, 1F, 20537 Hamburg, Germany

declare that the product

( description of the apparatus, system, installation to which it refers)

Mother Board

GA-7DXE

is in conformity with

(reference to the specification under which conformity is declared)

in accordance with 89/336 EEC-EMC Directive

EN 55011 Limits and methods of measurement EN 61000-3-2* Disturbances in supply systems caused

of radio disturbance characteristics of EN60555-2 by household appliances and similar

industrial, scientific and medical (ISM electrical equipment “Harmonics”

high frequency equipment

EN55013 Limits and methods of measurement EN61000-3-3* Disturbances in supply systems caused

of radio disturbance characteristics of EN60555-3 by household appliances and similar

broadcast receivers and associated electrical equipment “Voltage fluctuations”

equipment

EN 55014 Limits and methods of measurement EN 50081-1 Generic emission standard Part 1:

of radio disturbance characteristics of Residual, commercial and light industry

household electrical appliances,

portable tools and similar electrical EN 50082-1 Generic immunity standard Part 1:

apparatus Residual, commercial and light industry

EN 55015 Limits and methods of measurement EN 55081-2 Generic emission standard Part 2:

of radio disturbance characteristics of Industrial environment

fluorescent lamps and luminaries

EN 55020 Immunity from radio interference of EN 55082-2 Generic immunity standard Part 2:

broadcast receivers and associated Industrial environment

equipment

EN 55022 Limits and methods of measurement ENV 55104 Immunity requirements for household

of radio disturbance characteristics of appliances tools and similar apparatus

information technology equipment

DIN VDE 0855 Cabled distribution systems; Equipment EN 50091- 2 EMC requirements for uninterruptible

part 10 for receiving and/or distribution from power systems (UPS)

part 12 sound and television signals

CE marking (EC conformity marking)

The manufacturer also declares the conformity of above mentioned product

with the actual required safety standards in accordance with LVD 73/23 EEC

EN 60065 Safety requirements for mains operated EN 60950 Safety for information technology equipment

electronic and related apparatus for including electrical business equipment

household and similar general use

EN 60335 Safety of household and similar EN 50091-1 General and Safety requirements for

electrical appliances uninterruptible power systems (UPS)

Manufacturer/Importer

Signature : Timmy Huang

(Stamp) Date : Mar. 22, 2002 Name : Timmy Huang

7DX(R)+/7DXE

AMD AthlonTM/AthlonTM XP/DuronTM Socket A

處理器主機板

中文安裝手冊

AMD AthlonTM/AthlonTM XP/DuronTM Socket A 處理器主機板

REV. 1004

12MC-7DXRP-1004

使用手冊之組織架構

此安裝手冊是依下列章節組織而成：

1) 版本修改摘要使用手冊版本修改資訊

2) 清點附件產品盒內附件清單

3) 特色彙總主機板詳細資訊和規格

4) 安裝指南主機板安裝指南

5) 效能測試和晶片組功能方塊

圖主機板效能測試結果和晶片組功能方

塊圖

6) Suspend to RAM 及

Dual BIOS*/**/Q-Flash

STR 及 Dual BIOS/Q-Flash 安裝使用說

明

7) Four Speaker 及 SPDIF* Four Speaker 及 SPDIF 安裝說明

8) @BIOSTM 及EasyTuneIIITM @BIOSTM 及EasyTuneIIITM 功能介紹

9) RAID* RAID 功能介紹

10) BIOS 功能設定 BIOS 功能設定指南

11) 技術支援送修單記錄使用配備，提供快速服務

12) 附錄參考資料

"*" GA-7DXR+才支援此功能

"**" GA-7DX+才支援此功能

版本修改摘要 P.1

清點附件 P.2

特色彙總 P.3

7DX(R)+/7DXE 主機板的元件配置圖 P.5

安裝指南 P.6

插座及接腳設定的快速安裝指南 P.14

晶片組功能方塊圖 P.26

安裝 Suspend to RAM 功能 P.27

雙BIOS(Dual BIOS)*/**/Q-Flash 功能介紹 P.32

Four Speaker 及 SPDIF 功能介紹* P.40

@BIOSTM 功能介紹 P.46

EasyTuneIIITM 功能介紹 P.47

RAID 功能介紹* P.48

BIOS 組態設定目錄 P.64

技術支援/送修單 P.98

附錄 P.99

"*" GA-7DXR+才支援此功能

"**" GA-7DX+才支援此功能

7DX(R)+/7DXE 主機板

1

版本修改摘要

版本修改摘要日期

1.0 7DXR+主機板中文安裝手冊首版發行。 Dec. 2001

1.0 7DXR+/7DX+主機板中文安裝手冊第二版發行。 Dec. 2001

1.0 7DXR+/7DX+主機板中文安裝手冊第三版發行。 Jan. 2002

1.0 7DX(R)+/7DXE 主機板中文安裝手冊第四版發行。 Mar. 2002

本手冊所有提及之商標與名稱皆屬該公司所有。

主機板上的任何貼紙請勿自行撕毀，否則會影響到產品保固期限的認定標準。

本手冊若有任何內容修改，恕不另行通知。

2002年 3月 15日台北，台灣

清點附件

2

清點附件

! 7DXR+或7DX+或7DXE主機板一片

! 硬碟插座排線 x 1或 x 2* (綠色插座為ATA133，紅色插座為ATA100)

! 軟碟插座排線 x 1

! 主機板驅動程式光碟片

! 7DX(R)+/7DXE 中文使用手冊

! 4 x通用串列埠插座排線x 1(USB2.0)*

! 電腦組裝秘笈

"*" GA-7DXR+才支援此功能

7DX(R)+/7DXE 主機板

3

特色彙總

規格 # 主機板採四層設計 ATX 規格 30.5 公分 x 24.5 公分

中央處理器 # AMD AthlonTM/AthlonTM XP/DuronTM (K7) Socket A

處理器

128K 第一層快取記憶體及 256K/64K 第二層快

取記憶體內含於 CPU

# 支援 1.4 GHz 以上或更快

# 系統匯流排支援 200/266 MHz FSB

晶片組 7DX(R)+/7DXE，由以下晶片組成：

# AMD 761 Memory/PCI/AGP 北橋控制晶片

# VT82C686B 超級南橋(內含 I/O 晶片)

記憶體 # 3 184-pin DDR DIMM 插槽

# 支援 PC1600 DDR 或 PC2100 DDR SDRAM

# 最高可支援到 3GB DRAM

# 僅支援 2.5V DDR SDRAM

# 支援 64bit ECC type DRAM integrity 模式

I/O 控制器 # VT82C686B

擴充槽 # 1個AGP 擴充槽，支援 4倍及 AGP 2.0 規格**/***

# 1個AGP Pro 擴充槽，支援 4倍/2 倍(1.5V/3.3V)*

# 5個32-bit 的PCI Bus 擴充槽

(支援 33MHz 及相容 PCI 2.2 規格)

# 1個AMR (Audio Modem Riser) 擴充槽*/**

內建 IDE # IDE 1 及 IDE 2 支援 PIO mode 3, 4 UDMA 33 /

ATA 66 / ATA100 IDE & ATAPI CD-ROM

# IDE3 及IDE4 適用於 RAID, Ultra ATA-133, Ultra

ATA-100, EIDE*

# 4 IDE bus master IDE 插座可連接 8個裝置*

續下頁…

"*" GA-7DXR+才支援此功能

"**" GA-7DX+才支援此功能

"***" GA-7DXE 才支援此功能

特色彙總

4

內建周邊設備 # 1 個軟碟插座支援兩台磁碟機

(360K、720K、1.2M、1.44M 及 2.88M bytes)

# 1 個並列插座可支援 Normal/EPP/ECP 模式

# 2個串列插座 (COM A 及COM B)

# 支援 USB 2.0 x 4*，外接USB 1.1 x 2 及內建 USB

1.1 x 2

# 1個紅外線連接端(可連接 IR )

內建 RAID 功能* # Promise PDC20276

# 支援資料 striping (RAID 0) or mirroring (RAID 1)

# 支援雙 IDE 通道並行作業

# 符合 IDE bus master 標準

# 開機時顯示狀態及錯誤檢查訊息

# Mirroring 功能支援自動背景重建

# 內建的BIOS 具備LBA 與延伸中斷13h 磁碟機容

量轉換

內建 USB 2.0* # NEC D720100AS1 晶片

硬體監控 # 中央處理器/系統風扇轉速偵測

# 中央處理器/系統溫度偵測

# 系統電壓自動偵測

# 偵測中央處理器過溫警告

內建音效 # CODEC 音效晶片

# Creative CT5880 音效晶片*

# Line In/Line Out/Mic In/CD_In/Game Port

/Four Speaker*及SPDIF *

PS/2 插座 # PS/2 鍵盤連接埠及 PS/2 滑鼠連接埠

BIOS # 使用經授權 AWARD BIOS，2M bit 快閃記憶體

# 支援雙 BIOS (Dual BIOS)*/**

附加特色 # 網路遠端開機功能*/**

# 外接型數據機開機功能

# 支援 USB 及PS/2 鍵盤從 STR 模式喚醒功能

# 包含4個散熱風扇電源接腳*/**

# 鍵盤過電流保護

# 支援 STR 功能(Suspend-To-RAM)

# 支援 @BIOS™及EasyTuneIII™

"*" GA-7DXR+才支援此功能

"**" GA-7DX+才支援此功能

7DX(R)+/7DXE 主機板

5

7DX(R)+/7DXE 主機板的元件配置圖

7DX(R)+/7DXE

PCI1

PCI2

VT82C686B

AMD 761

Game & Audio

COM

A

LPT

KB_MS

Main

BIOS

PWR_FAN*/**

BAT1

FDD

IDE2

IDE1

CPU_FAN

F_PANEL

WOL*/**

USB1

AMR*/**

PCI3

PCI4

PCI5 USB2

Creative

CT5880*

CD_IN

CODEC

COM B

A

TX POWER

IR

SYS_FAN

DDR3

DDR2

DDR1

AGP_12V*

Backup

BIOS*/**

IDE4*

IDE3*

PDC

20276*

SW1

NB_FAN

Socket A

CPU

SW2*/**

AGP_PRO*

USB4*

USB3*

NEC*

注意：GA-7DX+ /GA-7DXE 支援 AGP 4X 擴充槽

"*" GA-7DXR+才支援此功能

"**" GA-7DX+才支援此功能

安裝指南

6

安裝指南

開始

警告!

主機板由許多精密的積體電路及其他元件所構成，這些積體電路很

容易因為遭到靜電影響而損失。所以請在正式安裝前，做好下列準

備。

1. 請將電腦的電源關閉，最好拔除電源插頭。

2. 拿取主機板時請儘量避免觸碰金屬接線部份。

3. 拿取積體電路元件(中央處理器、RAM)時，最好能夠戴上有防靜電手環。

4. 在積體電路未安裝前，需將元件置放在靜電墊或防靜電袋內。

5. 當您將主機板中的 ATX 電源供應器插座上的插頭拔除時，請確認電源供應器

的開關是關閉狀況。

安裝主機板至機殼中…

大多數電腦機殼的底部會有多個固定孔孔位，可使主機板確實固定並且不會短

路。

請小心不要讓螺絲接觸到任何 PCB 板上的線路或零件，當印刷電路主機板表面線

路接近固定孔時，您可使用塑膠墊片來讓螺絲與主機板表面隔離過，避免造成主

機板損壞或故障。

7DX(R)+/7DXE 主機板

7

請依據下列方式，完成電腦的安裝：

步驟 1 – 參考手冊內容調整 Jumper

步驟 2 – 安裝中央處理器 (CPU)

步驟 3 – 安裝記憶體模組

步驟 4 – 安裝所有介面卡

步驟 5 – 連接所有訊號線、排線、電源供應線及面版控制線

步驟 6 – 完成 BIOS 組態設定

步驟 7 – 安裝軟體驅動程式

步驟 3

步驟 2

步驟 5

步驟 1

步驟 4

安裝指南

8

中央處理器速度設定

您可以利用DIP switch SW1 來做中央處理器外頻切換，選擇100/133MHz。(倍頻取決

於中央處理器設計)

SW1: CPU FREQ.

100 MHz (預設值)

OFF ON

2 100MHz 133MHz

133 MHz

ON

2

ON

2

!我們建議您依照所選購之中央處理器選擇適當的外頻。

SW2 選擇中央處理器的倍頻：*/** O：ON，X：OFF

Ratio 1 2 3 4 5

Auto (預設值) X X X X O

5X O O X O X

5.5X X O X O X

6X O X X O X

6.5X X X X O X

7X O O O X X

7.5X X O O X X

8X O X O X X

8.5X X X O X X

9X O O X X X

9.5X X O X X X

10X O X X X X

10.5X X X X X X

11X O O O O X

11.5X X O O O X

12X O X O O X

12.5X X X O O X

!若您的中央處理器為鎖頻，此功能則無作用。

"*" GA-7DXR+才支援此功能 "**" GA-7DX+才支援此功能

7DX(R)+/7DXE 主機板

9

安裝中央處理器(CPU)

請確認您使用的中央處理器為本主機板的支援範圍。

中央處理器正面

中央處理器背面

1.將連桿向外拉出並昇起。

2.中央處理器的斜角對齊於插座的斜腳後

平行插入插座(中央處理器安裝是有方向

性的)。

連桿

安裝指南

10

AMD 中央處理器散熱裝置安裝：

在你啟動電腦之前，請先確認是否裝妥散熱裝置，否則將導致中央處理器過熱而

燒毀。

3.將連桿往下按至原位

(塗抹散熱膏於處理器上，可使處理器與

散熱風扇之間能達到較好的散熱效果。

以上動作請參考散熱風的使用手冊。)

4.使用經AMD 認證過的散熱風扇。

5.依箭頭方向依序將風扇確實扣緊。

6.確認中央處理器散熱風扇電源線接至中央處理器散熱風扇接頭，安裝完成。

細部安裝步驟請參考散熱風扇的使用手冊。

ページが読み込まれています...

Gigabyte GA-7DXR+ 取扱説明書

このマニュアルも適しています

Gigabyte GA-7DXR+ 取扱説明書

関連論文