ページを読み込んでいます...
FCC Compliance Statement:
This equipment has been tested and found to
comply with limits for a Class B digital device ,
pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable
protection against harmful interference in
residential installations. This equipment
generates, uses, and can radiate radio
frequency energy, and if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause interference to radio or
television equipment reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Move the equipment away from the receiver
-Plug the equipment into an outlet on a circuit different from that to which
the receiver is connected
-Consult the dealer or an experienced radio/television technician for
additional suggestions
You are cautioned that any change or modifications to the equipment not
expressly approve by the party responsible for compliance could void Your
authority to operate such equipment.
This device complies with Part 15 of the FCC Rules. Operation is subjected to
the following two conditions 1) this device may not cause harmful interference
and 2) this device must accept any interference received, including interference
that may cause undesired operation.
DECLARATION OF CONFORMITY
Per FCC Part 2 Section 2. 1077(a)
Responsible Party Name: G.B.T. INC.
Address: 18305 Valley Blvd., Suite#A
LA Puent, CA 91744
Phone/Fax No: (818) 854-9338/ (818) 854-9339
hereby declare s that the product
Product Name:
Model Number:
Mother Board
Conforms to the following specifications:
FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a),
Class B Digital Device
Supplementary Information:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful
and (2) this device must accept any inference received, including
that may cause undesired operation.
Representative Person's Name: ERIC LU
Signature:
Date: Mar.04,2000
Eric Lu
GA-6CXC7
Declaration of Conformity
We, Manufacturer/Importer
(full address)
G.B.T. Technology Träding GMbH
Ausschlager Weg 41, 1F, 20537 Hamburg, Germany
declare that the product
( description of the apparatus, system, installation to which it refers)
Mother Board
GA-6CXC7
is in conformity with
(reference to the specification under which conformity is declared)
in accordance with 89/336 EEC-EMC Directive
EN 55011 Limits and methods of measurement EN 61000-3-2* Disturbances in supply systems caused
of radio disturbance characteristics of EN60555-2 by household appliances and similar
industrial, scientific and medical (ISM electrical equipment “Harmonics”
high frequency equipment
EN55013 Limits and methods of measurement EN61000-3-3* Disturbances in supply systems caused
of radio disturbance characteristics of EN60555-3 by household appliances and similar
broadcast receivers and associated electrical equipment “Voltage fluctuations”
equipment
EN 55014 Limits and methods of measurement EN 50081-1 Generic emission standard Part 1:
of radio disturbance characteristics of Residual, commercial and light industry
household electrical appliances,
portable tools and similar electrical EN 50082-1 Generic immunity standard Part 1:
apparatus Residual, commercial and light industry
EN 55015 Limits and methods of measurement EN 55081-2 Generic emission standard Part 2:
of radio disturbance characteristics of Industrial environment
fluorescent lamps and luminaries
EN 55020 Immunity from radio interference of EN 55082-2 Generic immunity standard Part 2:
broadcast receivers and associated Industrial environment
equipment
EN 55022 Limits and methods of measurement ENV 55104 Immunity requirements for household
of radio disturbance characteristics of appliances tools and similar apparatus
information technology equipment
DIN VDE 0855 Cabled distribution systems; Equipment EN 50091- 2 EMC requirements for uninterruptible
part 10 for receiving and/or distribution from power systems (UPS)
part 12 sound and television signals
CE marking (EC conformity marking)
The manufacturer also declares the conformity of above mentioned product
with the actual required safety standards in accordance with LVD 73/23 EEC
EN 60065 Safety requirements for mains operated EN 60950 Safety for information technology equipment
electronic and related apparatus for including electrical business equipment
household and similar general use
EN 60335 Safety of household and similar EN 50091-1 General and Safety requirements for
electrical appliances uninterruptible power systems (UPS)
Manufacturer/Importer
Signature : Rex Lin
(Stamp) Date : Mar. 04, 2000 Name : Rex Lin
6CXC7
100 /133 MHz Pentium® II/ !!!
Socket 370
Socket 370
REV. 1.1 First Edition
R-11-01-000406C
:
1)
2)
3)
4)
5)
6) Suspend to RAM & Dual BIOS STR & Dual BIOS
7) Four Speaker & SPDIF Four Speaker & SPDIF
8) BIOS BIOS
9)
P.1
P.2
P.3
6CXC7 P.5
P.8
P.29
P.30
Suspend to RAM P.31
BIOS(Dual BIOS) ( ) P.39
Four Speaker & SPDIF ( ) P.44
P.49
BIOS P.50
P.79
6CXC7
1
1.1 6CXC7 Apr.2000
2000 04 06
2
þ 6CXC7
þ
þ (IUCD)
o COM B ( )
o USB ( )
o SCSI
þ 6CXC7
6CXC7
3
Ÿ CPU ATX 30.5 x 22
Ÿ 6CXC7 6CXC7, 6CXC7-1
CPU Ÿ 100/133 MHz Pentium II/!!! Socket 370
Ÿ 2nd CPU
Ÿ 82820 HOST / AGP / RDRAM Controller
Ÿ 82801AA(ICH) I/O Controller Hub
Ÿ 82805AA(MTH) Memory Translator Hub
Ÿ 100 / 133MHz
122/142/150/159 MHz clocks (reserved)
Ÿ 4 168-pin DIMM 4 banks.
(DIMM4 )
I/O Ÿ ITE IT8712 LPC
Ÿ 1 AMR (Audio Modem Riser) slot
Ÿ 1 Universal AGP Pro slot 1X/2X/4X 1.5V/3.3V /12V
device support
Ÿ 5 32-bit PCI Bus
Ÿ 1 16-bit ISA Bus (for 6CXC7)
IDE Ÿ IDE Intel 82801AA (ICH) PCI ,
PIO, Bus Master (Ultra DMA/33 ATA 66)
IDE HDD/CD-ROM
Ÿ IDE
Ÿ 1
(360K ,720K ,1.2M ,1.44M 2.88M bytes)
Ÿ 1 SPP/EPP/ECP
Ÿ 2 (COM A & COM B)
Ÿ 4 USB (Front USB port for 6CXC7)
Ÿ 1 ( IR/CIR ) ( )
( ) Ÿ CPU/ /
Ÿ CPU
Ÿ
Ÿ CPU
Ÿ
Ÿ
PCI to ISA Bridge Ÿ ITE8888 …
4
Ÿ Creative CT5880 sound ( for 6CXC7)
Ÿ AC’97 CODEC
Ÿ Line In/Line Out/Mic In/AUX In/CD In/TEL/Game Port
SPDIF and Four Speaker( for 6CXC7)
PS/2 Ÿ PS/2 PS/2
BIOS Ÿ AMI BIOS, 4M bit FWH
Ÿ Support Dual BIOS( for 6CXC7)
Ÿ /
Ÿ PS/2
Ÿ PS/2
Ÿ
Ÿ AC back
Ÿ USB / STR
Ÿ STR (Suspend-To-RAM)
Ÿ
6CXC7
5
6CXC7
6CXC7
ICH
82801
Main
BIOS
Backup
BIOS
AGP Pro
PCI1
PCI2
PCI3
PCI4
PCI5
ISA1
AMR
MCH
82820
JP4
JP2
PS/2
USB
LPT
COM A COM B
GAME & Audio
J7
J13 J14
JP20
ATX POWER
FLOPPY
IDE1
IDE2
JP19
BAT1
IR/CIR
J15
J11
JP16
AC97
JP3
JP1
DIMM4
DIMM3
J2
MTH
82805
SW1 FP USB
JP18
CT5880
DIMM2
DIMM1
JP10
BZ1
JP7
PGA 370
CPU
JP17
JP14
J3
JP11
J10
JP8
JP21
JP13
J6 J5
JP9
JP5
IT8888
6CXC7
6
$
CPU / Page
CPU P.8
P.10
P.10
COM A / COM B / LPT P.10
CN2: USB (Back) P.11
PS/2 PS/2 P.11
J3 (CPU ) P.12
J2 ( ) P.12
J11 ( ) P.13
ATX P.13
Floppy ( ) P.14
IDE 1 / IDE 2 P.14
J12: CIR/IR (/) [ ] P.15
CN9:USB (Front)[ ] P.15
JP3 (STR & LED1: DIMM LED) P.16
J5 (AUX_IN ) P.16
J7 CD Audio Line In( ) P.17
J6 (TEL) ( ) P.17
J13 (Wake On LAN) ( ) P.18
J14 (Ring Power On) ( ) P.18
J10 ( SMBUS ) P.19
P.20
J15 (2x11 Pins ) P.20
JP4 ( USB ) P.21
JP2 (PS/2 ) P.21
JP1 (STR ) P.22
JP8 ( ) P.22
JP20 ( ) [ ] P.23
JP17 (Top Block Lock ) [ ] P.23
JP11 ( CMOS ) [ ] P.24
JP18 ( ) P.24
6CXC7
7
JP13 ( ) [ ] P.25
JP14 ( USB ) [ ] P.25
JP7 (CPU )[ ] P.26
JP16 (BIOS ) [ ] P.26
JP19 ( ) [ ] P.27
JP10 (AMR [ ] P.27
JP9 ( ) [ ] P.28
JP5 (FORCE Cyrix 133) [ ] P.28
CPU
8
CPU
JP21 SW1 , 100MHz 133MHz Auto
BIOS .
SW1
CPU CLK
SDRAM
CLK AGP CLK
JP21 1 2 3 4 5 6
100/133
AUTO 100 66.6 1-2 X X
103 103 68.67 2-3 X
105 105 70.00 2-3 X X
100.3 100.3 66.87 2-3 X X
100.9 100.9 67.27 2-3 X X X
107 107 71.33 2-3 X X
109 109 72.66 2-3 X X X
112 112 74.67 2-3 X X X
114 114 76.00 2-3 X X X X
116.1 116.1 77.40 2-3 X X
118 118 78.67 2-3 X X X
133.3 133.3 66.65 1-2 X X X
120 120 80.00 2-3 X X X X
122 122 81.33 2-3 X X X
125 125 83.40 2-3 X X X X
128 128 85.47 2-3 X X X X
130 130 86.67 2-3 X X X X X
133.0 99.75 66.50 2-3 X X
133.9 100.425 66.95 2-3 X X X
138.0 103.5 69.00 2-3 X X X
142.0 106.5 71.00 2-3 X X X X
146.0 109.5 73.00 2-3 X X X
150.0 112.5 75.00 2-3 X X X X
153.0 114.75 76.50 2-3 X X X X
156.0 117 78.00 2-3 X X X X X
6CXC7
9
SW1
CPU CLK
SDRAM
CLK AGP CLK
JP21 1 2 3 4 5 6
159.1 119.325 79.55 2-3 X X X
162.0 121.5 81.00 2-3 X X X X
165.0 123.75 82.50 2-3 X X X X
168.0 126 84.00 2-3 X X X X X
171.0 128.25 85.50 2-3 X X X X
174.0 130.5 87.00 2-3 X X X X X
177.0 132.75 88.50 2-3 X X X X X
180.0 135 90.00 2-3 X X X X X X
(O: ON / X : OFF)
F
Auto
JP21
1
SW1
ON
1 2 3 4 5 6
«Note:
1. 100/133 MHz CPU, “Auto”.
2. 122 / 142 / 150 / 159MHz, .
122 / 142 / 150 /159MHz , ,
;CPU, , ,
** 122, 142, 150,159 MHz , Jumper JP9
2-3 1-2 .
10
MIC In
Game
Port
Line In
Line Out 1
Line Out 1: Line Out or SPDIF (
AC ). ”Line
Out”, ,”SPDIF Out”
(46 ).
Line In: ”Line In”. Creative
“Four Speaker” , ( 44
) ”Line In” ”Line Out 2”,
Line Out
1Line In .
COM A/ COM B / LPT
COM A
LPT Port
COM B
6CXC7
11
CN2 : USB (Back)
1
2
3 4
8
7 6 5
.
1 USB V0
2 USB D0-
3 USB D0+
4
5 USB V1
6 USB D1-
7 USB D1+
8
PS/2 PS/2
PS/2
1
2
3
4 VCC(+5V)
5
6
PS/2
PS/2
1 2
3
4
5
6
12
J3 : CPU
1
1
2 +12V
3
J2 :
1
1
2 +12V
3
/