2020.03
v1.0
使用说明
User Guide
T Series Spreading System
EN
2
© 2020
DJI All Rights Reserved.
Disclaimer
Carefully read this entire document and all safe and lawful practices provided by DJI
TM
before using this product
for the rst time. Failure to read and follow instructions and warnings may result in serious injury to yourself
or others, damage to your DJI product, or damage to other objects in the vicinity. By using this product, you
hereby signify that you have read this disclaimer carefully and that you understand and agree to abide by the
terms and conditions herein. You agree that you are solely responsible for your own conduct while using this
product, and for any consequences thereof. DJI accepts no liability for damage, injury, or any legal responsibility
incurred directly or indirectly from the use of this product.
DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. and its aliated companies. Names of products, brands,
etc., appearing in this document are trademarks or registered trademarks of their respective owner companies. This
product and document are copyrighted by DJI with all rights reserved. No part of this product or document shall be
reproduced in any form without the prior written consent of or authorization from DJI.
This disclaimer is available in various languages. In the event of divergence among different versions, the
English version shall prevail. The nal interpretation of this document and all related documents of this product
belongs to DJI. This content is subject to change without prior notice. For up to date product information, visit
http://www.dji.com and click on the product page for this product.
Warnings
1. The T Series Spreading System (abbreviated as Spreading System) is only compatible with the DJI AGRAS
TM
T
series aircraft, and the rmware of the aircraft must be the correct version for supporting the Spreading System.
Refer to the Specifications section for more information about compatible aircraft. DO NOT use it with other
products or for purposes other than agriculture.
2. The Spreading System is compatible with dry materials of a diameter between 0.5 - 5 mm. DO NOT use with
other materials. If used with other materials, the operating performance will be negatively affected and the
Spreading System may be damaged. All materials must be used in strict accordance with the instructions for
those materials.
3. The max internal spread tank load depends on the takeo weight of the aircraft. DO NOT overload. Refer to the
Specications section for more information.
4. When connecting the cables, make sure the connection is correct and secure. Operate with caution to avoid
damaging the cables.
5. Make sure that the hopper gate and spinner disk function normally before each use.
6. Operate with caution to avoid injury caused by mechanical parts.
7. When spreading is in progress, maintain a safe distance from the Spreading System to avoid injury.
8. When spreading is in progress, the minimum detection distance of the radar module will be 5 m instead of
1.5 m due to obstruction from the materials being spread. Note that the aircraft cannot sense obstacles that
are not within the detection range. The detection performance of the radar module will also decrease. Fly
with caution. Refer to the disclaimer and safety guidelines of the corresponding aircraft you are operating for
more information on the radar module.
9. DO NOT use liquids to rinse the Spreading System. It is recommended to use dry compressed air as a cleaning agent.
Introduction
The T Series Spreading System is compatible with Agras T series aircraft and oers ecient, reliable, and stable
spreading operations. The material delivery system is precisely controlled by the built-in stirring device and hopper
EN
© 2020
DJI All Rights Reserved.
3
Spreading System × 1
Spare Spinner Disk × 2
M4×12 Screws × 2
Users have the option to
purchase a fender with a
screw pack to use with the
Spreading System 2.0.
gate, which can prevent material blockages and improve operating accuracy and reliability.
Use the app compatible with your aircraft to set parameters such as the hopper outlet size and spinner disk rotating
speed. These parameters can be adjusted to meet dierent requirements. The app provides warning prompts for an
empty tank as well as for abnormalities in the rotating speed, temperature, and hopper outlet size. These prompts
help ensure system safety.
The Spreading System has two versions, 1.0 and 2.0. They each have a dierent structure for the spinner disk.
Compared with the Spreading System 1.0, the Spreading System 2.0 has a higher material delivery rate and can
spread materials 360° around the aircraft. Unless otherwise specied, the descriptions in this document use the
Spreading System 1.0 as an example.
In the Box
Overview
Spread Tank
Spreader
Spinner Disk
Spreader Lock
Cable
Installation
Make sure to remove the Intelligent Flight Battery from the aircraft before installation. Hex keys for M2.5, M3
and M4 screws are required for installation.
1. Lift and remove the spray tank on the aircraft.
2
. Removeall of the rubber stoppers and ve M3×8 screws on the upper cover on the front of the aircraft,
and then remove the upper cover. For the T20 aircraft, the cable strainer protector on the left must also be
removed.
EN
4
© 2020
DJI All Rights Reserved.
3. Locate the EMF/Liquid Level port on the spray control board. Remove the M2.5×8 screws on the cable
connector, and then unplug the cable and place it in the space near the aircraft frame. The location and
structure of the spray control board are dierent on the T20 and T16. Refer to the gures below for more
information.
T20
4. Detach the spread tank and the spreader: Pull the spreader lock knob out, rotate it 90°, and release. Next,
rotate the spreader to detach it.
Locked Unlocked
2
3
1
T16
EN
© 2020
DJI All Rights Reserved.
5
5. For the Spreading System 2.0, there is the option to mount the fender to the spreader. If mounted, the fender will
prevent materials from being spread to the rear of the aircraft.
5 cm
1
2
M3×8
6. Connect the Spreading System cable:
T20
Pass the cable through the space between the delivery pumps and spread tank mounting position. Secure the
cable to the cable strainer on the left of the aircraft, connect it to the EMF/Liquid Level port, and tighten the two
M2.5×8 screws.
M2.5×8
T16
a. Remove the M3×8 screws on both sides of the spray control board. Lift the board gently to make a space
between the board and the mounting position. DO NOT pull the cables connected on the board.
b. Pass the cable through the space between the delivery pumps and spread tank mounting position, then
through the space under the spray control board. Connect the cable to the EMF/Liquid Level port and
tighten the four M2.5×8 screws.
c. Remount the M3×8 screws on both sides of the spray control board.
7. Remount the cable strainer protector (for T20 only) and the upper cover of the aircraft. Tighten the ve M3×8
screws and attach all of the rubber stoppers.
M2.5×8
EN
6
© 2020
DJI All Rights Reserved.
9. Mounting the spreader:
a. Face the rear of the aircraft and check the spreader lock knob is in an unlocked position. Insert the spreader
with the knob located to the left of the circular indentation on the spread tank.
b. Rotate the spreader to mount it to the spread tank. To lock the spreader, pull the spreader lock knob out, rotate
it 90°, and release. Make sure that the spreader is locked in position.
1
3
2
8. Insert the spread tank in the aircraft. DO NOT insert it to the bottom of the aircraft frame. Make sure that the
middle of the tank is approximately 5 cm from the middle frame of the aircraft, as shown in the gure below.
5 cm
1
2
c. Secure the Spreading System cable to the landing gear using the Velcro on the cable.
EN
© 2020
DJI All Rights Reserved.
7
10. Insert the spread tank to the bottom of the aircraft frame and make sure it is in position. Insert and tighten two
M4×12 screws to the rear of the tank.
Operate with caution to avoid injury caused by mechanical parts.
Usage
1. Rotate the cover to open, add compatible materials, and tighten the cover.
2. Power on the remote controller, and then power on the aircraft.
3. Enter Operation View in the app. The following descriptions use the DJI Agras app as an example.
4. Tap the hopper outlet size display on the left of the screen to set the hopper outlet size, spinner disk
rotating speed, ying speed, line spacing, height relative to the vegetation, and banked turning. Adjustable
parameters vary depending on the operation mode. Adjust the settings so that they are suitable for the
materials you are using and test to make sure the performance is as expected.
For the Spreading System 1.0, when measuring between 7.5 to 9 kg/ha of materials spread, it is
recommended to:
• Adjust the hopper outlet size so that the material delivery rate is 1 kg/min.
• Adjust the spinner disk rotating speed so that the spreading range is 4 to 6 meters.
• Set the ying speed to 4 m/s (ying speed setting is unavailable in Manual Operation Mode).
For the Spreading System 2.0, when measuring 45 kg/ha of materials spread, it is recommended to:
• Adjust the hopper outlet size so that the material delivery rate is 8 kg/min.
• Adjust the spinner disk rotating speed so that the spreading range is 5 to 7 meters.
• Set the ying speed to 5 m/s (ying speed setting is unavailable in Manual Operation Mode).
5. Enter the operation mode required for spreading. The operations of the Spreading System vary depending on the
operation mode.
Route Operation Mode
After starting an operation, the aircraft ascends to an altitude of 4 meters and the spinner disk spins. When the
aircraft reaches the route starting point, the hopper gate opens according to the set value and the aircraft ies along
the route and spreads material automatically. Spreading cannot be started or stopped manually.
The operation resumption function can be used during operation. Once the operation is paused, the hopper gate
closes automatically to stop spreading while the spinner disk is still spinning. After operation is resumed, the aircraft
returns to the breakpoint or projection point and continues spreading.
EN
8
© 2020
DJI All Rights Reserved.
A-B Route Operation Mode
After the aircraft enters A-B Route Operation Mode, the spinner disk spins. When the aircraft reaches the rst turning
point, the hopper gate opens according to the set value and the aircraft ies along the route and spreads material
automatically. Spreading cannot be started or stopped manually.
The operation resumption function can be used during operation. Once the operation is paused, the hopper gate
closes automatically to stop spreading while the spinner disk is still spinning. After operation is resumed, the aircraft
returns to the breakpoint or projection point and continues spreading.
Manual Plus Operation Mode
Switch to M+ after the aircraft takes o. Press the Spray button on the remote controller to start the spinner
disk. The hopper gate opens according to the set value and the aircraft spreads material automatically once it
has begun ying.
Manual Operation Mode
Switch to M after the aircraft takes off. Use the Spray button on the remote controller to start or stop spreading.
In all operation modes except Manual Operation Mode:
• When the aircraft ies forward or backward, the hopper gate opens automatically to start spreading.
• When the aircraft ies left or right, the hopper gate closes automatically to stop spreading while the
spinner disk continues to spin.
Spreading System Calibration
When to Calibrate
The Spreading System has been calibrated before delivery. There is no need to calibrate before using for the rst
time. Calibration is required in any of the following cases:
• The hopper gate cannot fully open or close.
• The material delivery rate is dierent from the desired value.
• The app incorrectly displays empty tank warnings.
Calibration Procedure
In the app, enter Operation View. Tap , , then tap Calibration in Spreading System Settings. Wait until the app
indicates calibration is complete. If calibration fails, try again.
Maintenance
1. Clean the residue inside the spread tank and spreader regularly. It is recommended to use dry compressed
air and a clean, soft dry cloth. DO NOT rinse with liquids.
2. The spinner disk is a consumable part. If obvious signs of wear are noticeable, follow the steps below to
replace the spinner disk.
a. Make sure that the aircraft is powered o, and then unplug the Spreading System cable.
b. Detach the spreader.
c. Remove the nut, washer, four M3×8 screws, and spinner disk at the bottom of the spreader. Mount a new
spinner disk and secure it using the washers, M3×8 screws, and nut.
EN
© 2020
DJI All Rights Reserved.
9
Spinner Disk
Washer
M3×8 Screws
Nut
d. Remount the spreader to the spread tank. Make sure that the spreader is locked in position.
Operate with caution to avoid injury caused by mechanical parts.
The content is subject to change without prior notice.
Download the latest version from
http://www.dji.com/t20
AGRAS and are trademarks of DJI.
Copyright © 2020 DJI All Rights Reserved.
Specications
Items Spreading System 1.0 Spreading System 2.0
Compatible Aircraft* Agras T16, T20
Spreader Weight 1.8 kg 2.1 kg (excluding fender)
Max Hopper Outlet Area 8.6 cm
2
32.3 cm
2
Compatible Material
Diameter
0.5 - 5 mm
Spread Tank Volume 20 L
Spread Tank Internal Load
Using with the T16: 16 kg
Using with the T20: 20 kg (note: the internal load of Japan version of T20 is 16 kg)
Spreading Range
Varies according to material diameter, spinner disk rotating speed, hopper outlet
size, and ying altitude. For best operating performance, it is recommended to
adjust the corresponding variables to achieve a spreading range of 4 - 6 meters
(for Spreading System 1.0) or 5 - 7 meters (for Spreading System 2.0).
* The rmware of the aircraft must be the correct version for supporting the Spreading System. Check the
release notes of the corresponding aircraft on the ocial DJI website.
10
©
2020 大疆创新 版权所有
CHS
免责声明
使用本产品之前，请仔细阅读并遵循本文及大疆
TM
创新（DJI
TM
）提供的所有安全指引，否则可能会给您和周
围的人带来伤害，损坏本产品或其它周围物品。一旦使用本产品，即视为您已经仔细阅读本文档，理解、认
可和接受本声明全部条款和内容。您承诺对使用本产品以及可能带来的后果负全部责任。大疆创新（DJI）对
于直接或间接使用本产品而造成的损坏、伤害以及任何法律责任不予负责。
DJI 是深圳市大疆创新科技有限公司及其关联公司的商标。本文出现的产品名称、品牌等，均为其所属公司的
商标。本产品及手册为大疆创新版权所有。未经许可，不得以任何形式复制翻印。
本文档及本产品所有相关的文档最终解释权归大疆创新（DJI）所有。如有更新，恕不另行通知。请访问
www.dji.com 官方网站以获取最新的产品信息。
注意事项
1. T 系列播撒系统（简称“播撒系统”）仅适用于大疆农业 T 系列植保无人飞机（具体机型见“规格参数”），
且需配合支持播撒系统的飞行器固件使用。切勿在其他产品上使用或用于农业植保以外的用途。
2. 播撒系统适合使用颗粒直径为 0.5 - 5 mm 的干燥物料。切勿使用其他物料，否则将影响作业效果，甚至损坏
播撒系统。使用时，严格按照物料本身的使用说明进行操作。
3. 播撒系统作业箱最大载重与飞行器起飞重量有关，详见“规格参数”。切勿超重使用。
4. 连接线材时，确保正确牢固，小心操作，以免损坏线材。
5. 每次使用前，检查仓门开合是否顺畅，播撒盘运转是否正常。
6. 使用时务必小心，谨防机械结构伤手。
7. 进行播撒作业时，务必远离播撒系统，以免造成人身伤害。
8. 进行播撒作业时，由于播撒颗粒的遮挡，雷达模块的最小检测距离将由 1.5 米变为 5 米。如有障碍物处于探
测范围以外，则飞行器无法感知障碍物。同时，雷达模块的检测性能亦有所减弱，务必谨慎飞行。更多雷达
模块注意事项请参考对应飞行器的《免责声明和安全操作指引》。
9. 禁止水洗。建议使用干燥的压缩空气进行清洁。
简 介
播撒系统是一款适用于大疆农业植保无人飞机的配件，将其安装至飞行器，可完成高效、可靠、稳定的播撒作业。
内置搅拌装置及落料口仓门控制结构，精准控制落料速率，并有效防止落料堵塞，提高作业准确度及可靠性。
用户可通过与飞行器配套使用的 App 设置仓口大小、播撒盘转速等，满足不同作业场景的使用需求。App 可提
示无料报警及转速、温度、仓口大小等参数异常报警，确保系统安全运行。
播撒系统分为 1.0 和 2.0 版本，其播撒盘结构有所不同。与播撒系统 1.0 相比，播撒系统 2.0 具有更大的落料速率，
且可以在飞行器水平方向上 360°范围内播撒物料。若无特殊注明，本文均以播撒系统 1.0 为例进行说明。
物品清单
播撒系统 ×1
备用播撒盘 ×2
M4×12 螺丝 ×2
对于播撒系统 2.0，用户
还可选购挡板及螺丝包配
合使用。
©
2020 大疆创新 版权所有
11
CHS
部件名称
作业箱
播撒机
播撒盘
播撒机锁止旋钮
连接线
安 装
安装前务必确保飞行器智能飞行电池已取下。安装时需自备适用于 M2.5、M3 和 M4 螺丝的六角扳手。
1. 向上提起并取出飞行器的喷洒作业箱。
2. 移除飞行器前部上盖的所有胶塞及 5 颗 M3×8 螺丝，然后移除上盖。对于 T20 飞行器，还需取下左侧（面
向机尾）的线卡保护盖。
3. 在喷洒板上找到“流量计 / 液位计”接口，移除连接线接头上的 M2.5×8 螺丝，然后拔下连接线，放置于靠
近机壳边缘的空位中。T20 与 T16 的喷洒板位置及结构不同，详见下图。
T20
12
©
2020 大疆创新 版权所有
CHS
4. 分离播撒系统的作业箱与播撒机：向外拔出播撒机锁止旋钮，转动 90°后松开以解除锁定，然后转动播撒机
将其拆下。
6. 连接播撒系统连接线：
T20
将播撒系统连接线从液泵与作业箱安装位的空隙穿过，嵌入飞行器左侧的线卡，然后插入“流量计 / 液位计”
接口，并拧紧 2 颗 M2.5×8 螺丝。
锁止状态 解锁状态
2
3
1
5. 对于播撒系统 2.0，用户可选择安装挡板至播撒机，安装挡板后播撒系统将不会向飞行器后方播撒物料。
5 cm
1
2
M3×8
T16
M2.5×8
©
2020 大疆创新 版权所有
13
CHS
8. 将播撒系统的作业箱插入飞行器，注意不要完全插入，作业箱中部与飞行器中框距离约 5 cm（如图）。
5 cm
1
2
T16
a. 移除喷洒板两侧的 M3×8 螺丝，然后轻轻向上提起喷洒板，使其与安装位之间稍有空隙。注意不要扯到
喷洒板上已连接的线材。
b. 将播撒系统连接线从液泵与作业箱安装位的空隙以及喷洒板下方的空隙中依次穿过，然后插入“流量计 /
液位计”接口，并拧紧 4 颗 M2.5×8 螺丝。
c. 重新安装喷洒板两侧的 M3×8 螺丝。
7. 重新安装线卡保护盖（仅 T20）及飞行器上盖，拧紧 5 颗 M3×8 螺丝，装好所有胶塞。
M2.5×8
14
©
2020 大疆创新 版权所有
CHS
9. 安装播撒机：
a. 面向飞行器尾部，确保播撒机锁止旋钮处于解锁状态，将旋钮位置偏向作业箱上圆形凹槽的左侧，然后向
上嵌入播撒机。
b. 转动播撒机将其安装至作业箱，然后向外拔出锁止旋钮，转动 90°后松开以锁定播撒机。务必确保播撒
机锁定到位。
1
3
2
c. 使用播撒系统连接线上的魔术贴将线材固定至起落架。
10. 将作业箱完全插入飞行器，确保安装到位，然后在作业箱后侧插入并拧紧 2 颗 M4×12 螺丝，将其固定。
务必小心操作，谨防机械结构伤手。
使 用
1. 旋开作业箱盖子，加入适量物料，然后拧紧盖子。
2. 依次开启遥控器及飞行器。
3. 进入 App 作业界面。下文描述均以大疆农业 App 为例。
4. 点击屏幕左侧的仓口大小显示，进入播撒参数设置，可设置仓口大小、播撒盘转速、飞行速度、作业间距、
相对作业高度、协调转弯等。不同作业模式下可设置的参数有所不同。用户需自行根据所使用的物料调整各
参数并进行测试，以达到预期作业效果。
对于播撒系统 1.0，以物料亩用量 0.5 - 0.6 kg 为例，建议：
• 调节仓口大小使每分钟落料量为 1 kg；
• 调节播撒盘转速使播撒范围为 4 - 6 m；
• 设置飞行速度为 4 m/s（手动作业模式下飞行速度设置不生效）。
对于播撒系统 2.0，以物料亩用量 3 kg 为例，建议：
• 调节仓口大小使每分钟落料量为 8 kg；
©
2020 大疆创新 版权所有
15
CHS
• 调节播撒盘转速使播撒范围为 5 - 7 m；
• 设置飞行速度为 5 m/s（手动作业模式下飞行速度设置不生效）。
5. 按照飞行器使用方法进入所需作业模式进行播撒作业。播撒系统在不同作业模式下的运行方式略有不同。
航线作业模式
执行作业后，飞行器起飞上升至 4 米高度，同时播撒盘开始转动。飞行器飞至航线起点时，仓门按照所设值开启，
飞行器沿航线飞行并播撒物料。用户不可手动开启或停止播撒。
作业时可使用作业恢复功能：作业暂停后，仓门关闭，播撒停止（播撒盘仍继续转动）；继续作业后，飞行器
飞回中断坐标点或投影点，然后自动继续播撒作业。
A-B 点作业模式
切换至 A-B 点作业模式后，播撒盘开始转动。飞行器飞至第一个节点时， 仓门按照所设值开启，飞行器沿作业
路线飞行并播撒物料。用户不可手动开启或停止播撒。
作业时可使用作业恢复功能：作业暂停后，仓门关闭，播撒停止（播撒盘仍继续转动）；继续作业后，飞行器
飞回中断坐标点或投影点，然后自动继续播撒作业。
增强型手动作业模式
飞行器起飞后，切换至 M+ 作业模式。此时用户需短按一次遥控器喷洒按键（此时作为播撒按键使用）以使播
撒盘转动。飞行器开始飞行后，仓门按照所设值开启，并自动播撒物料。
手动作业模式
飞行器起飞后，切换至 M 作业模式。用户可使用遥控器播撒按键手动开始或停止播撒。
除手动作业模式外，其他作业模式下：
•
飞行器前后飞行时仓门自动开启，进行播撒；
•
飞行器左右飞行时仓门自动关闭，停止播撒（播撒盘仍继续转动）。
播撒系统校准
需要校准的情况
播撒系统出厂时已完成校准，可直接使用。若使用时出现以下情况，则用户需自行校准：
• 仓门无法完全打开或关闭；
• 落料速率与预期值有偏差；
• App 误报无料报警。
校准步骤
进入 App 作业界面 > > ，在播撒系统设置中点击校准，然后等待校准完成。若校准失败，请重试。
维护保养
1. 定期清理作业箱及播撒机内的残渣。建议使用干燥的压缩空气吹气进行清理，并使用干净柔软的干布擦拭。
切勿水洗。
2. 播撒盘为易损耗部件，如存在明显磨损，请按如下步骤及时更换播撒盘：
a. 确保飞行器电源断开，然后断开播撒系统连接线。
b. 拆下播撒机。
c. 移除播撒机下方的螺母、垫片、4 颗 M3×8 螺丝及播撒盘，然后安装新的播撒盘，装回垫片并拧紧
M3×8 螺丝及螺母。
16
©
2020 大疆创新 版权所有
CHS
播撒盘
垫片
M3×8 螺丝
螺母
内容如有更新，恕不另行通知。
您可以在 DJI 官方网站查询最新版本
http://www.dji.com/t20
DJI 和 是大疆创新的商标。
Copyright © 2020 大疆创新 版权所有
规格参数
参数 播撒系统 1.0 播撒系统 2.0
适用飞行器 * 大疆 T16、T20 植保无人飞机
播撒机重量 1.8 kg 2.1 kg（不含挡板）
最大仓门开口面积 8.6 cm
2
32.3 cm
2
适用物料颗粒直径 0.5 - 5 mm
播撒作业箱容积 20 L
播撒作业箱内部最大载重
配合 T16 使用时：16 kg
配合 T20 使用时：20 kg（注意：日本版为 16 kg）
播撒范围
与物料颗粒直径、播撒盘转速、仓口大小、飞行高度等因素有关。建议用户调
整相关变量，使播撒范围处于 4 - 6 m（播撒系统 1.0）或 5 - 7 m（播撒系统 2.0），
以获得较好的作业效果
* 需配合支持播撒系统的固件使用，请留意 DJI 官网对应机型的发布记录。
d. 重新安装播撒机至作业箱，并确保播撒机锁定到位。
务必小心操作，谨防机械结构伤手。
© 2020
DJI All Rights Reserved.
17
Compliance Information
FCC Compliance Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) This device
must accept any interference received, including interference that may cause undesired
operation.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
EU Compliance Statement:
SZ DJI TECHNOLOGY CO., LTD. hereby declares that this
device is in compliance with the essential requirements and other relevant provisions of the
Directive 2014/30/EU.
A copy of the EU Declaration of Conformity is available online at www.dji.com/euro-
compliance
EU contact address: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
Declaración de cumplimiento UE:
SZ DJI TECHNOLOGY CO., LTD. por la presente
declara que este dispositivo cumple los requisitos básicos y el resto de provisiones
relevantes de la Directive 2014/30/EU.
Hay disponible online una copia de la Declaración de conformidad UE en www.dji.com/
euro-compliance
Dirección de contacto de la UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer,
Germany
EU-verklaring van overeenstemming:
SZ DJI TECHNOLOGY CO., LTD. verklaart hierbij
dat dit apparaat voldoet aan de essentiële vereisten en andere relevante bepalingen van
Richtlijn 2014/30/EU.
De EU-verklaring van overeenstemming is online beschikbaar op www.dji.com/euro-
compliance
Contactadres EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
Declaração de conformidade da UE:
A SZ DJI TECHNOLOGY CO., LTD. declara, através
deste documento, que este dispositivo está em conformidade com os requisitos essenciais
e outras disposições relevantes da Diretiva 2014/30/EU.
Existe uma cópia da Declaração de conformidade da UE disponível online em www.dji.
com/euro-compliance
Endereço de contacto na UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
Dichiarazione di conformità UE:
SZ DJI TECHNOLOGY CO., LTD. dichiara che il presente
dispositivo è conforme ai requisiti essenziali e alle altre disposizioni rilevanti della direttiva
2014/30/EU.
Una copia della dichiarazione di conformità UE è disponibile online all'indirizzo Web www.
dji.com/euro-compliance
Indirizzo di contatto UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
Déclaration de conformité UE :
Par la présente, SZ DJI TECHNOLOGY CO., LTD déclare
que cet appareil est conforme aux principales exigences et autres clauses pertinentes de
la directive européenne 2014/30/EU.
Une copie de la déclaration de conformité UE est disponible sur le site www.dji.com/euro-
compliance
Adresse de contact pour l'UE : DJI GmbH, Industriestrasse 12, 97618, Niederlauer,
Germany
EU-Compliance:
Hiermit erklärt SZ DJI TECHNOLOGY CO., LTD., dass dieses Gerät den
wesentlichen Anforderungen und anderen einschlägigen Bestimmungen der EU-Richtlinie
2014/30/EU entspricht.
Eine Kopie der EU-Konformitätserklärung finden Sie online auf www.dji.com/euro-
compliance.
Kontaktadresse innerhalb der EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer,
Germany
Декларация за съответствие на ЕС:
SZ DJI Technology Co., Ltd. декларира, че това
устройство отговаря на основните изисквания и другите приложими разпоредби на
Директива 2014/30/ЕС.
Копие от Декларацията за съответствие на ЕС ще намерите онлайн на адрес www.dji.
com/euro-compliance
Адрес за контакт за ЕС: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Германия
Prohlášení o shodě pro EU:
Společnost SZ DJI Technology Co., Ltd. tímto prohlašuje, že
tohle zařízení vyhovuje základním požadavkům a dalším příslušným ustanovením směrnice
2014/30/EU.
Kopie prohlášení o shodě pro EU je k dispozici on-line na webu www.dji.com/euro-
compliance
Kontaktní adresa v EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Německo
EU-overensstemmelseserklæring:
SZ DJI Technology Co., Ltd. erklærer hermed, at denne
enhed er i overensstemmelse med de væsentlige krav og andre relevante bestemmelser i
direktiv 2014/30/EU.
Der er en kopi af EU-overensstemmelseserklæringen tilgængelig online på www.dji.com/
euro-compliance
EU-kontaktadresse: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Tyskland
Δήλωση Συμμόρφωσης ΕΕ:
Η SZ DJI Technology Co., Ltd. δια του παρόντος δηλώνει ότι
η συσκευή αυτή συμμορφώνεται με τις βασικές απαιτήσεις και άλλες σχετικές διατάξεις της
Οδηγίας 2014/30/EΕ.
Αντίγραφο της Δήλωσης Συμμόρφωσης ΕΕ διατίθεται ηλεκτρονικά στη διεύθυνση www.dji.
com/euro-compliance
Διεύθυνση επικοινωνίας στην ΕΕ: DJI GmbH, Industriestrasse 12, 97618, Niederlauer,
Γερμανία
ELi vastavuskinnitus
Käesolevaga teatab SZ DJI Technology Co., Ltd., et see seade on
kooskõlas direktiivi 2014/30/EL oluliste nõuete ja muude asjakohaste sätetega.
ELi vastavusdeklaratsiooni koopia on kättesaadav veebis aadressil www.dji.com/euro-
compliance
Kontaktaadress ELis: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Saksamaa
Pranešimas dėl atitikties ES reikalavimams
Bendrovė „SZ DJI Technology Co., Ltd.“
tvirtina, kad šis prietaisas atitinka pagrindinius 2014/30/ES direktyvos reikalavimus ir kitas
susijusias nuostatas.
ES atitikties deklaracijos kopiją galite rasti adresu www.dji.com/euro-compliance
ES kontaktinis adresas: „DJI GmbH“, Industriestrasse 12, 97618, Niederlauer, Germany
(Vokietija)
ES atbilstības paziņojums:
SZ DJI Technology Co., Ltd ar šo apliecina, ka šī ierīce atbilst
direktīvas 2014/30/ES pamatprasībām un pārējiem būtiskiem nosacījumiem.
ES atbilstības deklarācijas kopija pieejama tiešsaistē vietnē www.dji.com/euro-compliance
ES kontaktadrese: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Vācija
EU:n vaatimustenmukaisuusvakuutus:
SZ DJI Technology Co., Ltd. ilmoittaa täten, että
tämä laite on direktiivin 2014/30/EU olennaisten vaatimusten ja sen muiden asiaankuuluvien
ehtojen mukainen.
Kopio EU:n vaatimustenmukaisuusvakuutuksesta on saatavana verkossa osoitteessa www.
dji.com/euro-compliance
Yhteystiedot EU:ssa: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
RÁITEAS Comhlíonta an AE:
Dearbhaíonn SZ DJI Technology Co., Ltd. leis seo go bhfuil
an gléas seo de réir na gceanglas riachtanach agus na bhforálacha ábhartha eile sa Treoir
2014/30/AE.
Tá coip de Dhearbhú Comhréireachta an AE ar fáil ar líne ag www.dji.com/euro-compliance
Seoladh teagmhála san AE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
Dikjarazzjoni ta’ Konformità tal-UE:
SZ DJI Technology Co., Ltd. hawnhekk tiddikjara li dan
l-apparat huwa konformi mar-rekwiżiti essenzjali u ma’ dispożizzjonijiet relevanti oħra tad-
Direttiva 2014/30/UE.
Kopja tad-Dikjarazzjoni ta’ Konformità tal-UE hija disponibbli onlajn s-sit www.dji.com/euro-
compliance
Indirizz ta’ kuntatt tal-UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, il-Ġermanja
Declarația UE de conformitate:
Prin prezenta, SZ DJI Technology Co., Ltd. declară faptul
că acest dispozitiv este conform cu cerințele esențiale și celelalte prevederi relevante ale
Directivei 2014/30/UE.
Un exemplar al Declarației UE de conformitate este disponibil online, la adresa www.dji.
com/euro-compliance
Adresa de contact pentru UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer,
Germania
Izjava EU o skladnosti:
Družba SZ DJI Technology Co., Ltd. izjavlja, da ta naprava ustreza
osnovnim zahtevam in drugim ustreznim določbam Direktive 2014/30/EU.
Kopija izjave EU o skladnosti je na voljo na spletu nawww.dji.com/euro-compliance
Kontaktni naslov EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Nemčija
EU Izjava o sukladnosti:
Tvrtka SZ DJI Technology Co. Ltd. izjavljuje da je ovaj uređaj
izrađen u skladu s osnovnim zahtjevima i ostalim relevantnim odredbama Direktive 2014/30/
EU.
Kopija EU Izjave o sukladnosti dostupna je na mrežnoj stranici www.dji.com/euro-
compliance
Adresa EU kontakta: DJI GmbH, Industriestrasse 12 97618, Niederlauer, Njemačka
Vyhlásenie o zhode EÚ:
SZ DJI Technology Co., Ltd. týmto vyhlasuje, že toto zariadenie
je v zhode so základnými požiadavkami a ďalšími relevantnými ustanoveniami smernice
2014/30/EÚ.
Kópia tohto Vyhlásenia o zhode EÚ je k dispozícii online na www.dji.com/euro-compliance
Kontaktná adresa v EÚ: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Nemecko
Deklaracja zgodności UE:
Firma SZ DJI Technology Co., Ltd. niniejszym oświadcza, że
przedmiotowe urządzenie jest zgodne z zasadniczymi wymogami i innymi stosownymi
postanowieniami dyrektywy 2014/30/UE.
Kopię deklaracji zgodności UE można znaleźć w Internecie na stronie www.dji.com/euro-
compliance
Adres do kontaktu w UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Niemcy
EU megfelelőségi nyilatkozat:
A DJI Technology Co., Ltd. ezúton megerősíti, hogy ez
az eszköz megfelel a 2014/30/EU Irányelv alapvető követelményeinek és más vonatkozó
rendelkezéseinek.
Az EU megfelelőségi nyilatkozat másolata elérhető a www.dji.com/euro-compliance oldalon
EU kapcsolati cím: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Németország
EU-försäkran om efterlevnad:
SZ DJI Technology Co., Ltd. härmed förklarar att denna
enhet uppfyller de väsentliga kraven och andra relevanta bestämmelser i direktivet 2014/30/
EU.
En kopia av EU-försäkran om efterlevnad nns att tillgå online på adressen www.dji.com/
euro-compliance
Kontaktadress EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Tyskland
Yrlýsing um fylgni við reglur ESB:
SZ DJI Technology Co., Ltd. lýsir hér með yr að þetta
tæki hlíti mikilvægum kröfum og öðrum viðeigandi ákvæðum tilskipunar 2014/30/ESB.
Nálgast má eintak af ESB-samræmisyrlýsingunni á netinu á www.dji.com/euro-compliance
Heimilisfang ESB-tengiliðar: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
AB Uygunluk Beyanı:
SZ DJI Technology Co., Ltd. bu belge ile bu cihazın temel
gerekliliklere ve 2014/30/EU sayılı Direktin diğer ilgili hükümlerine uygun olduğunu beyan
eder.
AB Uygunluk Beyanının bir kopyasına www.dji.com/euro-compliance adresinden çevrim içi
olarak ulaşılabilir
AB için iletişim adresi: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Almanya
Environmentally friendly disposal
Old electrical appliances must not be disposed of together with the residual
waste, but have to be disposed of separately. The disposal at the communal
collecting point via private persons is for free. The owner of old appliances
is responsible to bring the appliances to these collecting points or to similar
collection points. With this little personal effort, you contribute to recycle valuable
raw materials and the treatment of toxic substances.
Umweltfreundliche Entsorgung
Elektro-Altgeräte dürfen nicht mit gewöhnlichem Abfall entsorgt werden und müssen separat
entsorgt werden. Die Entsorgung an kommunalen Sammelstellen ist für Privatpersonen
kostenlos. Die Eigentümer der Altgeräte sind für den Transport zu den Sammelstellen
verantwortlich. Durch diesen geringen Aufwand können Sie zur Wiederverwertung von
wertvollen Rohmaterialien beitragen und dafür sorgen, dass umweltschädliche und giftige
Substanzen ordnungsgemäß unschädlich gemacht werden.
Tratamiento de residuos responsable con el medio ambiente
Los aparatos eléctricos viejos no pueden desecharse junto con los residuos orgánicos, sino
que deben ser desechados por separado. Existen puntos limpios donde los ciudadanos
pueden dejar estos aparatos gratis. El propietario de los aparatos viejos es responsable de
llevarlos a estos puntos limpios o similares puntos de recogida. Con este pequeño esfuerzo
estás contribuyendo a reciclar valiosas materias primas y al tratamiento de residuos tóxicos.
Mise au rebut écologique
Les appareils électriques usagés ne doivent pas être éliminés avec les déchets résiduels.
Ils doivent être éliminés séparément. La mise au rebut au point de collecte municipal par
18
© 2020
DJI All Rights Reserved.
部件名称
有害物质
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr
+6
)
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
线路板
× ○ ○ ○ ○ ○
外壳
× ○ ○ ○ ○ ○
金属部件（铜合金）
× ○ ○ ○ ○ ○
内部线材
× ○ ○ ○ ○ ○
其他配件
× ○ ○ ○ ○ ○
本表格依据 SJ/T 11364 的规定编制。
○
：
表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要求
以下。
×
：
表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 规定的限
量要求。
（产品符合欧盟 ROHS 指令环保要求）
l'intermédiaire de particuliers est gratuite. Il incombe au propriétaire des appareils usagés
de les apporter à ces points de collecte ou à des points de collecte similaires. Avec ce
petit effort personnel, vous contribuez au recyclage de matières premières précieuses et
au traitement des substances toxiques.
Smaltimento ecologico
I vecchi dispositivi elettrici non devono essere smaltiti insieme ai riuti residui, ma devono
essere smaltiti separatamente. Lo smaltimento da parte di soggetti privati presso i punti
di raccolta pubblici è gratis. È responsabilità del proprietario dei vecchi dispositivi portarli
presso tali punti di raccolta o punti di raccolta analoghi. Grazie a questo piccolo impegno
personale contribuirete al riciclo di materie prime preziose e al corretto trattamento di
sostanze tossiche.
Milieuvriendelijk afvoeren
Oude elektrische apparaten mogen niet worden weggegooid samen met het restafval, maar
moeten afzonderlijk worden afgevoerd. Afvoeren via het gemeentelijke inzamelpunt is gratis
voor particulieren. De eigenaar van oude toestellen is verantwoordelijk voor het inleveren
van de apparaten op deze of vergelijkbare inzamelpunten. Met deze kleine persoonlijke
inspanning lever je een bijdrage aan de recycling van waardevolle grondstoffen en de
verwerking van giftige stoffen.
Eliminação ecológica
Os aparelhos elétricos antigos não podem ser eliminados juntamente com os materiais
residuais. Têm de ser eliminados separadamente. A eliminação no ponto de recolha
público através de entidades particulares é gratuita. É da responsabilidade do proprietário
de aparelhos antigos levá-los a estes pontos de recolha ou a pontos de recolha
semelhantes. Com este pequeno esforço pessoal, contribui para a reciclagem de matérias-
primas úteis e para o tratamento de substâncias tóxicas.
Изхвърляне с оглед опазване на околната среда
Старите електрически уреди не трябва да се изхвърлят заедно с битовите отпадъци,
а отделно. Изхвърлянето в общинския пункт за събиране на отпадъци от частни лица
е безплатно. Собственикът на старите уреди е отговорен за пренасянето на уредите
до тези или до подобни събирателни пунктове. С това малко собствено усилие
допринасяте за рециклирането на ценни суровини и за обработката на токсични
вещества.
Ekologicky šetrná likvidace
Stará elektrická zařízení nesmějí být likvidována spolu se zbytkovým odpadem, ale musí
být likvidována samostatně. Likvidace na komunálních sběrných místech prostřednictvím
soukromých osob je bezplatná. Vlastník starých zařízení odpovídá za to, že je donese do
těchto sběrných míst nebo na obdobná sběrná místa. Tímto můžete přispět k recyklaci
hodnotných surovin a zpracování toxických látek.
Miljøvenlig bortskaelse
Gamle elektriske apparater må ikke bortskaffes sammen med restaffald, men
skal bortskaffes separat. Bortskaffelse på et fælles indsamlingssted er gratis for
privatpersoner. Ejere af gamle apparater er ansvarlige for at bringe apparater hen til disse
indsamlingssteder eller til lignende indsamlingssteder. Med denne lille personlige indsats
bidrager du til genanvendelse af værdifulde råvarer og behandlingen af giftige stoffer.
Απόρριψη φιλική προς το περιβάλλον
Οι παλιές ηλεκτρικές συσκευές δεν πρέπει να απορρίπτονται μαζί με τα υπολειμματικά
απόβλητα, αλλά ξεχωριστά. Η απόρριψη στο δημοτικό σημείο συλλογής μέσω ιδιωτών γίνεται
χωρίς χρέωση. Ο κάτοχος παλιών συσκευών είναι υπεύθυνος για τη μεταφορά των συσκευών
σε αυτά ή παρόμοια σημεία συλλογής. Μέσω της ατομικής σας προσπάθειας, συμβάλλετε
στην ανακύκλωση πολύτιμων πρώτων υλών και την επεξεργασία των τοξικών ουσιών.
Keskkonnasäästlik kasutuselt kõrvaldamine
Vanu elektriseadmeid ei tohi ära visata koos olmejäätmetega, vaid tuleb koguda ja
kasutuselt kõrvaldada eraldi. Kohaliku omavalitsuse elektroonikaromude kogumispunktis
on äraandmine eraisikutele tasuta. Vanade seadmete sellistesse või sarnastesse
kogumispunktidesse toimetamise eest vastutavad seadmete omanikud. Selle väikese
isikliku panusega aitate kaasa väärtusliku toorme ringlussevõtule ja mürgiste ainete
töötlemisele.
Utilizavimas nekenkiant aplinkai
Senų elektrinių prietaisų negalima išmesti kartu su buitinėmis atliekomis; juos būtina
utilizuoti atskirai. Tokių prietaisų utilizavimas per komunalinius atliekų surinkimo punktus
yra nemokamas. Elektrinių prietaisų savininkai utilizuojamus prietaisus privalo priduoti
į atitinkamus arba analogiškus atliekų surinkimo punktus. Tokiu būdu, įdėdami nedaug
pastangų, prisidėsite prie vertingų medžiagų perdirbimo ir aplinkos apsaugojimo nuo
toksinių medžiagų.
Videi draudzīga atkritumu likvidēšana
Vecas elektriskās ierīces nedrīkst likvidēt kopā ar pārējiem atkritumiem, bet tās jālikvidē
atsevišķi. Privātpersonām atkritumu likvidēšana komunālajā savākšanas punktā ir bez
maksas. Veco ierīču īpašnieks ir atbildīgs par ierīču nogādāšanu šajos savākšanas punktos
vai līdzīgos savākšanas punktos. Ar šīm nelielām personiskajām pūlēm jūs veicināt vērtīgu
izejmateriālu pārstrādi un toksisko vielu apstrādi.
Hävittäminen ympäristöystävällisesti
Vanhoja sähkölaitteita ei saa hävittää kaatopaikkajätteen mukana, vaan ne on hävitettävä
erikseen. Kunnalliseen keräyspisteeseen vieminen on yksityishenkilölle ilmaista. Vanhojen
laitteiden omistaja vastaa laitteiden toimittamisesta kyseisiin keräyspisteisiin tai vastaaviin.
Tällä vähäisellä henkilökohtaisella vaivalla edistät omalta osaltasi arvokkaiden raaka-
aineiden kierrätystä ja myrkyllisten aineiden käsittelyä.
Diúscairt neamhdhíobhálach don chomhshaol
Níor cheart seanghléasanna leictreacha a dhiúscairt leis an dramhaíl iarmharach, ach
caithfear iad a chur de láimh astu féin. Tá an diúscairt ag an ionad bailiúcháin pobail ag
daoine príobháideacha saor in aisce. Tá freagracht ar úinéir seanghléasanna na gléasanna
a thabhairt chuig na hionaid bhailiúcháin sin nó chuig ionaid bhailiúcháin den chineál
céanna. Le hiarracht bheag phearsanta mar sin, cuidíonn tú le hamhábhair luachmhara a
athchúrsáil agus le substaintí tocsaineacha a chóireáil
Rimi li jirrispetta l-ambjent
L-apparat elettriku qadim ma għandux jintrema imkien ma’ skart residwu, iżda għandu
jintrema b’mod separat. Ir-rimi l-post tal-ġbir komunali minn persuni privati huwa b’xejn.
Is-sit ta’ apparat qadim huwa responsabbli biex iġib l-apparat f’dawn il-postijiet tal-ġbir jew
f’postijiet tal-ġbir simili. B’dan l-isforz personali żgħir, inti tikkontribwixxi għar-riċiklaġġ ta’
materja prima prezzjuża u għat-trattament ta’ sustanzi tossiċi.
Eliminarea ecologică
Aparatele electrice vechi nu trebuie aruncate odată cu deșeurile reziduale, ci trebuie
eliminate separat. Eliminarea în cadrul punctului de colectare local de către persoane zice
este gratuită. Proprietarii de aparate vechi sunt responsabili pentru transportul acestora
la respectivele puncte de colectare sau la alte puncte de colectare similare. Prin acest
efort personal nesemnicativ, puteți contribui la reciclarea materiilor prime valoroase și la
tratarea substanțelor toxice.
Okolju prijazno odlaganje
Starih električnih aparatov ne smete odvreči skupaj z ostanki odpadkov, temveč ločeno.
Odlaganje na komunalnem zbirnem mestu je za zične osebe brezplačno. Lastnik starih
naprav je odgovoren, da jih pripelje do teh ali podobnih zbirnih mest. S tako malo osebnega
truda prispevate k recikliranju dragocenih surovin in obdelavi strupenih snovi.
Ekološko odlaganje
Stari električni uređaji ne smiju se odlagati zajedno s kućnim otpadom, već ih treba odlagati
odvojeno. Odlaganje na komunalnom sabirnom mjestu od strane privatnih osoba je
besplatno. Vlasnik starih uređaja dužan je donijeti uređaje do tih sabirnih mjesta ili sličnih
sabirnih mjesta. Ovim malim osobnim naporom doprinosite recikliranju vrijednih sirovina i
pravilnoj obradi otrovnih tvari.
Ekologická likvidácia
Staré elektrospotrebiče sa nesmú likvidovať spolu so zvyškovým odpadom, ale musia
sa zlikvidovať samostatne. Likvidácia v komunálnom zbernom mieste prostredníctvom
súkromných osôb je bezplatná. Majiteľ starých spotrebičov je zodpovedný za prinesenie
spotrebičov na tieto zberné miesta alebo na podobné zberné miesta. Týmto malým
osobným úsilím prispievate k recyklovaniu cenných surovín a spracovaniu toxických látok
Utylizacja przyjazna dla środowiska
Nie można usuwać starych urządzeń elektrycznych wraz z pozostałymi odpadami.
Wymagają one oddzielnej utylizacji. Utylizacja przez osoby prywatne w punkcie zbiórki
odpadów komunalnych jest darmowa. Właściciel starych urządzeń jest odpowiedzialny
za dostarczenie ich do takich lub podobnych punktów zbiórki. Zadając sobie tak niewielki
trud, przyczyniasz się do recyklingu cennych surowców i odpowiedniego postępowania z
substancjami toksycznymi.
Környezetbarát hulladékkezelés
A régi elektromos készülékeket nem szabad a nem szelektíven gyűjtött hulladékkal együtt
kidobni, hanem a hulladékkezelésüket elkülönítve kell végezni A közösségi gyűjtőpontokon
a magánszemélyek ingyenesen leadhatják ezeket. A régi készülékek tulajdonosai
felelnek azért, hogy e készülékeket ezekre a gyűjtőpontokra, vagy más gyűjtőpontokra
elhozzák. Ezzel a kis személyes erőfeszítéssel Ön is hozzájárul az értékes nyersanyagok
újrahasznosításához és a mérgező anyagok kezeléséhez.
Miljövänlig hantering av avfall
Gamla elektriska apparater får inte kasseras tillsammans med restavfallet utan måste
kasseras separat. Kassering på den lokala insamlingsplatsen för privatpersoner är gratis.
Ägaren av gamla apparater ansvarar för att ta apparaterna till dessa insamlingsplatser eller
till liknande insamlingsplatser. Med denna lilla personliga insats bidrar du till återvinning av
värdefulla råvaror och hantering av giftiga ämnen.
Umhversvæn förgun
Ekki má farga gömlum raftækjum með úrgangsleifum, heldur þarf að farga þeim
sérstaklega. Förgun á almennum söfnunarstöðum er ókeypis fyrir einstaklinga. Eigandi
gamalla tækja ber ábyrgð á að koma með tækin á þessa söfnunarstaði eða á svipaða
söfnunarstaði. Með þessu litla persónulega átaki stuðlar þú að endurvinnslu verðmætra
hráefna og meðferð eitrurefna.
Çevre dostu bertaraf
Eski elektrikli cihazlar, diğer atıklarla birlikte bertaraf edilmemeli, ayrıca atılmalıdır. Özel
kişiler aracılığıyla genel toplama noktasına bertaraf işlemi ücretsiz olarak yapılmaktadır.
Eski cihazların sahibi, cihazları bu toplama noktalarına veya benzer toplama noktalarına
getirmekten sorumludur. Bu az miktardaki kişisel çabayla, değerli ham maddelerin geri
dönüştürülmesine ve toksik maddelerin işleme alınmasına katkıda bulunmuş olursunuz.
IC Compliance
This device complies with ICES-003 standard. Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
CAN ICES-3(B)/NMB-3(B)
如果您对说明书有任何疑问或建议，请通过以下电子邮箱联系我们：
。
If you have any questions about this document, please contact DJI
by sending a message to
.
Printed in China.
微信扫一扫关注
大疆行业应用公众号
行业应用
微信扫一扫关注
大疆农业服务公众号
For the latest information on Agras products,
scan the Facebook or YouTube QR code.
Facebook YouTube
DJI Support
DJI
技术支持
http://www.dji.com/support
35PDT2SMDY01
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
