fig.2j
fig.1j
fig.4j
CB-SP1 MADE IN CHINA 40782089 1PD
©
CB-SP1_je1 1 ページ ２００７年７月１３日 金曜日 午後４時７分
USING THE UNIT SAFELY
• Never drop this product or subject it
to strong impact while it contains
any device.
Important Notes
• This product is a case for storing the set of
SP-555, SP-404 or SonicCell.
• Do not expose the unit to direct sunlight,
place it near devices that radiate heat, leave
it inside an enclosed vehicle, or otherwise
subject it to temperature extremes. Excessive
heat can deform or discolor the unit.
• For everyday cleaning wipe the unit with a
soft, dry cloth or one that has been slightly
dampened with water. To remove stubborn
dirt, use a cloth impregnated with a mild,
non-abrasive detergent. Afterwards, be sure
to wipe the unit thoroughly with a soft, dry
cloth.
• Never use benzine, thinners, alcohol or
solvents of any kind, to avoid the possibility
of discoloration and/or deformation.
• Do not launder or wash the entire bag.
Main Specifications
• Dimensions:
340 (W) x 170 (D) x 310 (H) mm
13-7/16 (W) x 6-3/4 (D) x 12-1/4 (H)
inches
(not including the handle)
• Weight:
650 g / 1 lb 7 oz
• Main Materials:
polyester / polyethylene resin,
polyurethane
* In the interest of product improvement,
the specifications and/or appearance of
this unit are subject to change without
prior notice.
Used for instructions intended to alert
the user to the risk of injury or material
damage should the unit be used
improperly.
* Material damage refers to damage or
other adverse effects caused with
respect to the home and all its
furnishings, as well to domestic
animals or pets.
Used for instructions intended to alert
the user to the risk of death or severe
injury should the unit be used
improperly.
The ● symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In
the case of the symbol at left, it means that the power-
cord plug must be unplugged from the outlet.
The symbol alerts the user to important instructions
or warnings.The specific meaning of the symbol is
determined by the design contained within the
triangle. In the case of the symbol at left, it is used for
general cautions, warnings, or alerts to danger.
The symbol alerts the user to items that must never
be carried out (are forbidden). The specific thing that
must not be done is indicated by the design contained
within the circle. In the case of the symbol at left, it
means that the unit must never be disassembled.
Caution when storing your effects processor
1.SP-555
fig.1j
When stowing an SP-555, position it so its
controllers are facing the front (the large
pocket) and the connection jacks are facing
upward.
2.SP-404
fig.2j
When stowing an SP-404, position it so it's on
its side and the controllers are facing the front
(the large pocket).
3.SonicCell
fig.3j
When stowing a SonicCell, position it so it's on
its side, the controllers are facing the front (the
large pocket), and the connection jacks are
facing upward. The inside pad (150 x 150 mm)
is detachable.
At the time of purchase, it is attached at a
suitable location for the SP-555/SP-404. When
you're stowing a SonicCell, we recommend
placing the inside pad at the center of the case.
CB-SP1 MADE IN CHINA 40782089 1PD
Copyright
©
2007 ROLAND CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.
*40782089- 01*
CB-SP1_je1 2 ページ ２００７年７月１３日 金曜日 午後４時７分
-
1
-
2
