2. CLAXY
  3. B8878DU

CLAXY B8878DU, D-2926D ユーザーマニュアル

  • CLAXY T2926DU-A 天井照明器具の取扱説明書について、ご質問にお答えします。この説明書には、器具の取り付け方法、配線方法、安全に関する注意事項などが記載されています。お気軽にご質問ください。
  • 電源を切るにはどうすれば良いですか？
    配線はどのように接続すれば良いですか？
    ランプシェードの取り付け方法は？
INSTALLATION INSTRUCTIONS
Fixture Name: T2926DU-A
For Ceiling Mount Light Fixture
WARNING ! SHUT OFF POWER AT FUSE OR CIRCUIT BREAKER.
Shut off the main power supply from the main
fuse box/circuit breaker.
1。Take the lights out of the package. Cut off the
power, then use the screw 1 to mount the siding 2
to the ceiling’s junction box.
2 。Connect the wires as the Fig 2 instructed.
3。 Use the the nut 6 to mount the wired lamps to
the screw 3 which is in the ceiling’s siding.
4。Use the outer ring 9 to fix the lampshade 8 on
the light socket 7.
5。Install the light source. Connect the power,
and lighting installation completed.
Fig. 1
CONNECTING THE WIRES (Fig 2)
1. Attach the power supply wires to the fixture
lead wires by connecting BLACK to BLACK (or
SMOOTH) and WHITE to WHITE (or RIBBED).
2. Attach the GROUND wire(GREEN or
COPPER) from the Junction Box and the fixture
Ground wire to the green Ground Screw on the
Mounting Bracket (B) or connect both wires
together using the correct size of wire connectors.
NOTE: Twist the wires together in the same
direction you twist the wire connector onto the
wires.
3. Tuck these wire connections neatly into the
Junction Box.
For Customer Service, contact the place of purchase to arrange for replacement parts.
/