iPod touch(1G,2G,3G,4G)
iPod nano 1G
iPhone, iPhone 3G, iPhone 3G
iPod nano 2G
iPod nano 3G iPod nano 4G iPod nano(5G,6G)
iPhone(4,4S)
iPod classic
EN
To get the detailed instructions for use, visit
www.philips.com/support.
ྐྵल؇ᄊฌೊ؊ૅwww.philips.com/support.
ኘͧˊஔ
EN
1 Important
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
g Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
h Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifi ers) that produce heat.
i Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
j Only use attachments/accessories specifi ed by the manufacturer.
k Unplug this apparatus during lightning storms or when unused for long periods of
time.
l Refer all servicing to qualifi ed service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
m Apparatus shall not be exposed to dripping or splashing.
n Do not place any sources of danger on the apparatus (e.g. liquid fi lled objects, lighted
candles).
o This product may contain lead and mercury. Disposal of these materials may be
regulated due to environmental considerations. For disposal or recycling information,
please contact your local authorities or the Electronic Industries Alliance: www.eiae.
org.
p Where the plug of the Direct Plug-in Adapter is used as the disconnect device, the
disconnect device shall remain readily operable.
Warning
• Never remove the casing of this apparatus.
• Never place this apparatus on other electrical equipment.
• Ensure that you always have easy access to the power cord, plug or adaptor to disconnect the apparatus
from the power.
2 Notice
Any changes or modifi cations made to this device that are not expressly approved by Philips
Consumer Lifestyle may void the user’s authority to operate the equipment.
“Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed
to connect specifi cally to iPod or iPhone respectively, and has been certifi ed by the developer
to meet Apple performance standards. Apple is not responsible for the operation of this
device or its compliance with safety and regulatory standards. Please note that the use of this
accessory with iPod or iPhone may affect wireless performance.
iPod and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries.
Disposal of your old product
Your product is designed and manufactured with high quality materials and components,
which can be recycled and reused.
Never dispose of your product with other household waste. Please inform yourself
about the local rules on the separate collection of electrical and electronic products. The
correct disposal of these products helps prevent potentially negative consequences on the
environment and human health.
Please visit www.recycle.philips.com for additional information on a recycling center in your
area.
Environmental information
All unnecessary packaging has been omitted. We have tried to make the packaging easy to
separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can be recycled and reused if disassembled by a
specialized company. Please observe the local regulations regarding the disposal of packaging
materials, exhausted batteries and old equipment.
Note
• The type plate is located on the bottom of the apparatus.
3 Specifications
Amplifi er
Rated output Power 4W per channel x 2
Signal to Noise Ratio > 62 dB
General information
AC Power
DC Power
Model: AS110-080-AB130 (Philips);
Input: 100-240 V ~, 50/60Hz, 0.5A;
Output: 8.0V 1.3A
Operation Power Consumption 15 W
Standby Power Consumption < 1 W
Dimensions
- Main Unit (W x H x D)
265x 94 x 74mm
Weight
- Main Unit
0.9 kg
简体中文
1
注意事项
a
阅读这些说明。
b
保留这些说明。
c
注意所有警告。
d
遵循所有说明。
e
不要在靠近水的地方使用本装置。
f
只能使用干布进行清洁。
g
不要堵塞任何通风口。按照制造商的说明进行安装。
h
不要在任何热源附近安装,如散热器、蓄热器、炉具或其它发热设备(包括功
放器)。
i
防止电源线被踩踏或挤夹,特别是在插头、电源插座和设备电源线出口位置。
j
仅使用制造商指定的附件
/
配件。
k
在雷电天气期间或长期不用的情况下,请拔下本装置的电源插头。
l
所有维修均应由合格的维修人员来执行。本装置有任何损坏时,如电源线或插
头损坏,液体泼溅到或物体跌落到装置上,装置淋雨或受潮,无法正常运行,
或者跌落,均需要进行维修。
m
切勿将本装置置于漏水或溅水环境下。
n
不要将任何危险源放在本装置上(例如装有液体的物体、点燃的蜡烛)。
o
本产品可能含铅或汞。出于环境考虑,可能需要按规定处理这些材料。有关弃
置或回收的信息,请联系当地管理部门或电子工业联盟:
www.eiae.org
。
p
如果将直插式适配器的插头用作断开设备,则断开设备应可以随时使用。
警告
•
切勿拆下本产品的外壳。
•
切勿将本装置放在其它电器设备上面。
•
确保始终可轻易地接触到电源线、电源插头或适配器,以便于将本装置从电源上断开。
2
注意
如果用户未经
Philips
优质生活部门的明确许可而擅自对此设备进行更改或修改,则
可能导致其无权操作此设备。
“
Made for iPod
”和“
Made for iPhone
”表示电子附件专为连接
iPod
或
iPhone
而设计,并经开发人员认证,符合
Apple
性能标准。
Apple
对该设备的操作及其是
否符合安全和法规标准不负任何责任。请注意,通过
iPod
或
iPhone
使用该附件可
能影响无线性能。
iPod
和
iPhone
是
Apple Inc.
在美国
和其它国家
/
地区注册的商标。
弃置旧产品
本产品采用可回收利用的高性能材料和组件制造而成。
切勿将本产品与其它生活垃圾一起处理。请自行了解当地关于分类收集电子和电气
产品的规定。正确弃置这些产品有助于避免对环境和人体健康造成潜在的负面影
响。
关于您所在地区回收中心的更多信息,请访问
www.recycle.philips.com
。
环境信息
已省去所有不必要的包装。我们努力使包装易于分为三种材料:纸板(盒)、泡沫
塑料(缓冲物)和聚乙烯(袋、保护性泡沫片)。
您的系统包含可回收利用的材料(如果由专业公司拆卸)。请遵守当地有关包装材
料、废电池和旧设备的处理的规定。
注
• 型号铭牌位于本设备的底部。
3
规格
功放器
额定输出功率
4
瓦每声道
x 2
信噪比
> 62 dB
一般信息
交流电源
直流电源
型号:
AS110-080-AB130
(飞利浦);
输入:约
100-240
伏、
50/60
赫兹、
0.5
安;
输出:
8.0
伏
1.3
安
操作功耗
15
瓦
待机功耗
< 1
瓦
尺寸
-
主装置(宽
x
高
x
厚)
265x 94 x 74
毫米
重量
-
主装置
0.9
千克