Samsung HW-H600 ユーザーマニュアル

タイプ
ユーザーマニュアル
Wireless Audio - SoundStand
Imagine the possibilities
Thank you for purchasing this Samsung product.
To receive a more complete service, please register your product at
www.samsung.com/register
User manual
HW-H600
FEATURES
2
FEATURES
TV SoundConnect
TV SoundConnect lets you listen to audio from your TV on your SoundStand via a Bluetooth connection and lets you
control the sound.
HDMI
HDMI transmits video and audio signals simultaneously, and provides a clearer picture.
The unit is also equipped with the ARC function which lets you listen to sound from your TV through the SoundStand
via an HDMI cable.This function is only available if you connect the unit to an ARC compliant TV.
Surround Sound Expansion
The Surround Sound Expansion feature adds depth and spaciousness to your listening experience. Surround Sound
Expansion is powered by Sonic Emotion.
Special Sound Modes
You can select different sound modes - CINEMA / SPORTS / VOICE / MUSIC / STANDARD (OFF) - depending on the
type of content you want to enjoy.
Multi-function Remote Control
You can use the supplied remote control to control various operations with the simple press of a button.
USB Host Support
You can connect and play music files from external USB storage devices such as MP3 players, USB flash memory,
etc. using the SoundStand's USB HOST function.
Bluetooth Function
You can use connect a Bluetooth device to the SoundStand and enjoy music with high quality stereo sound, all
without wires!
NFC
Connect your NFC compatible device via Bluetooth to the SoundStand using this simple set-up procedure and play
music on the device through the SoundStand.
3
ENG
SAFETY INFORMATION
SAFETY INFORMATION
SAFETY WARNINGS
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates “dangerous voltage” inside
the product that presents a risk of electric shock or
personal injury.
This symbol indicates important instructions
accompanying the product.
WARNING : To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
This apparatus shall always be connected to a AC outlet with a protective grounding connection.
To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug
shall be readily operable.
CAUTION
Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on the apparatus.
To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug
must be easily and readily accessible at all times.
SAFETY INFORMATION
4
During thunderstorms, disconnect the AC plug from the
wall outlet. Voltage peaks due to lightning could damage
the unit.
Protect the product from moisture (i.e. vases), and
excess heat (e.g. a fireplace) or equipment creating
strong magnetic or electric fields. Disconnect the power
cable from the AC supply if the unit malfunctions. Your
product is not intended for industrial use. It is for
personal use only.
Condensation may occur if your product has been
stored in cold temperatures. If transporting the unit
during the winter, wait approximately 2 hours until the
unit has reached room temperature before using.
Do not expose the unit to direct sunlight or other heat
sources.
This could lead to overheating and cause the unit to
malfunction.
The batteries used with this product contain chemicals
that are harmful to the environment.
Do not dispose of batteries in the general household
trash.
Do not dispose of batteries in a fire.
Do not short circuit, disassemble, or overheat the
batteries.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Di h d di hACl f
P
tt
th
d
t
f
i
t
(
i
)
Dhidilihhh
Th b tt i d ith thi d t t i h i
PRECAUTIONS
Ensure that the AC power supply in your house complies with the power requirements listed on the identification
sticker located on the back of your product. Install your product horizontally, on a suitable base (furniture), with enough
space around it for ventilation
7~10 cm
. Make sure the ventilation slots are not covered. Do not place the unit on
amplifiers or other equipment which may become hot. This unit is designed for continuous use. To fully turn off the
unit, disconnect the AC plug from the wall outlet. Unplug the unit if you intend to leave it unused for a long period of
time.
99.1mm 99.1mm
68.6
mm
99.1mm
5
ENG
CONTENTS
2
FEATURES
3
SAFETY INFORMATION
3 Safety warnings
4 Precautions
6
GETTING STARTED
6 Before reading the user’s manual
6 What’s included
7
DESCRIPTIONS
7 Top/front panel
8 Rear panel
9
REMOTE CONTROL
9 Remote control buttons and functions
11
INSTALLATION
11 SoundStand installation
12
CONNECTIONS
12 Connecting an external device using an
HDMI cable
13 Connecting an external device using
OPTICAL (DIGITAL) cable or AUDIO
(ANALOGUE) cable
CONTENTS
14
FUNCTIONS
14 Input mode
14 ARC (HDMI OUT)
15 Bluetooth
17 NFC
18 TV SoundConnect
19 USB
20 Software upgrade
21
TROUBLESHOOTING
22
APPENDIX
22 Specifications
22 License
Figures and illustrations in this User Manual are
provided for reference only and may differ from
actual product appearance.
An administration fee may be charged if either
(a) an engineer is called out at your request and
there is no defect with the product (i.e. where
the user manual has not been read).
(b) you bring the unit to a repair centre and there is
no defect with the product (i.e. where the user
manual has not been read).
You will be informed of the administration fee
amount before a technician visits.
GETTING STARTED
6
GETTING STARTED
BEFORE READING THE USER’S MANUAL
Note the following terms before reading the user manual.
+ Icons used in this manual
Icon Term Definition
Caution
Indicates a situation where a function does not operate or settings may be canceled.
Note
Indicates tips or instructions on the page that help you operate a function.
+ Safety Instructions and Troubleshooting
1) Be sure to familiarise yourself with the Safety Instructions before using this product. (See page 3)
2) If a problem occurs, check Troubleshooting. (See page 21)
+ Copyright
©2014 Samsung Electronics Co.,Ltd.
All rights reserved; no part of this user’s manual may be reproduced or copied without the prior written permission of
Samsung Electronics Co.,Ltd.
WHAT’S INCLUDED
Check for the supplied accessories shown below.
(Protection pad : 4ea)
Remote Control /
Lithium Battery
(3V : CR2032)
User Manual AUX Cable
Pad
Adapter Power Cord USB Cable NFC Sticker
The appearance of the accessories may differ slightly from the illustrations above.
Use the dedicated USB cable to connect external USB devices to the unit.
7
ENG
DESCRIPTIONS
DESCRIPTIONS
TOP/FRONT PANEL
POWER BUTTON
Turns the power on and off.
REMOTE CONTROL SENSOR
The remote control can operate
SoundStands made by SAMSUNG only.
VOLUME +/-
Controls the volume level.
The numeric value of the volume level
appears in the front panel display.
DISPLAY
Displays the current mode.
FUNCTION BUTTON
Selects the D.IN, AUX, HDMI, BT, TV, USB
input.
While the unit is powered on, pressing the
(
) button for more than 3 seconds sets
the button to act as MUTE button. To
cancel MUTE button setup, press the (
)
button for more than 3 seconds again.
When you turn on this unit, there will be a 4 to 5 second delay before it produces sound.
If you want to enjoy the sound only from the SoundStand, you must turn off the TV's speakers in the Audio
Setup menu of your TV. Refer to the owner's manual supplied with your TV.
DESCRIPTIONS
8
REAR PANEL
Power Supply IN
Connect the AC power adaptor to
the power supply jack, and then
connect the AC power adaptor plug
to a wall outlet.
USB PORT
Connect USB devices such as
MP3 players here to the play files
on the devices.
AUX IN
Connect to the Analogue output
of an external device.
HDMI IN Jack
Inputs digital video and audio
signals simultaneously using an
HDMI cable. Use when connecting
a supported external device.
HDMI OUT Jack
Outputs digital video and audio
signals simultaneously using an HDMI
cable.
OPTICAL IN
Connect to the digital (optical)
output of an external device.
When disconnecting the power cable of the AC power adaptor from the wall outlet, pull the plug. Do not
pull the cable.
Do not connect this unit or other components to an AC outlet until all connections between components
are complete.
9
ENG
REMOTE CONTROL
REMOTE CONTROL
REMOTE CONTROL BUTTONS AND FUNCTIONS
Play/Pause
Press the
►
button to pause playing the file temporarily.
Press the
►
button again to play the selected file.
SOURCE
MUTE
SYNC
SYNC
POWER
SOUND
EFFECT
REPEAT
Bluetooth
POWER
VOL
WOOFER
LEVEL
Surr.
Sound
DIMMER
SOURCE
Press to select a source connected to the SoundStand.
Skip Forward
If there is more than one file on the device you are playing, and you
press the $ button, the next file is selected.
REPEAT
You can set the REPEAT function during music playback from a USB
device.
REPEAT OFF : Cancels Repeat Playback.
REPEAT FILE : Repeatedly play a track.
REPEAT ALL : Repeatedly play all tracks.
REPEAT RANDOM : Plays tracks in random order. (A track that has
already been played may be played again.)
DIMMER/ANYNET+
DIMMER : Press the DIMMER/ANYNET+ button on the remote to
control the brightness of the display.
ANYNET+ : Turns on the ANYNET+ function which lets the remote
from your ANYNET+ Samsung TV control the SoundStand. The
ANYNET+ function toggles on and off each time the DIMMER/
ANYNET+ button is pressed and held for more than 5 seconds.
Surr.Sound (Surround Sound Expansion)
Surr.Sound adds depth and spaciousness to the sound. Pressing the
Surr.Sound button repeatedly cycles through the Surr.Sound settings:
AUTO, ON, OFF.
SURROUND SOUND AUTO : If the sound source is more than 2
channels then SURROUND SOUND ON turns on automatically. On the
other hand, if the sound source is less than 2 channels (STEREO), then
mode is automatically set to SURROUND SOUND OFF.
WOOFER LEVEL
You can control the woofer volume.
Press
or button on the WOOFER LEVEL button to increase or
decrease the woofer volume. You can set it from SW -6 to SW +6.
SoundStand is a Samsung proprietary name.
Operate the TV using the TV's remote control.
REMOTE CONTROL
10
Bluetooth POWER
Press the Bluetooth POWER button on the remote to turn the
Bluetooth Power function on and off.
See pages 16 and 18 for details.
POWER
Turns the SoundStand on and off.
VOLUME
Adjusts the volume level of the unit.
SOUND EFFECT
Press to select a sound effect mode.
Select the STANDARD mode if you want to enjoy the original sound.
When you choose a Sound Effect mode (except STANDARD), Surround
Sound Expansion will automatically be turned OFF.
Skip Back
If there is more than one file on the device you are playing, and you
press the # button, the previous file is selected.
MUTE
You can turn the volume down to 0 with the push of a button. Press
again to restore the sound to the previous volume level.
SOURCE
MUTE
SYNC
SYNC
POWER
SOUND
EFFECT
REPEAT
Bluetooth
POWER
VOL
WOOFER
LEVEL
Surr.
Sound
DIMMER
AUDIO SYNC
If the SoundStand is connected to a digital TV and the video appears
out of sync with the audio, press the Audio Sync buttons to sync the
audio with the video.
Press the AUDIO SYNC +/- buttons to set the audio delay from 0 to
300 ms. In USB mode, TV mode, or BT mode, the Audio Sync
function may not work.
+ Installing the Batteries in the Remote Control
1. Use a suitable coin to turn
the remote control's battery
cover counterclockwise to
remove it as shown in the
figure above.
2. Insert a 3V lithium battery. Keep the
positive (+) pole facing up when inserting
the battery. Put the battery cover on and
align the '
' marks side by side as shown
in the figure above.
3. Use a suitable coin to turn
the remote control battery
cover clockwise as far as it
will go to fix it in place.
11
ENG
INSTALLATION
INSTALLATION
SOUNDSTAND INSTALLATION
If you want to place your TV on top of the SoundStand, please make sure that your TV satisfies the two conditions
below:
- Maximum TV weight : 35 kg
- Maximum TV stand dimension : Smaller than 720 mm X 320 mm
Fits most TVs up to 1524mm and up to 35kg (*TV screen size and stand type may vary)
+ How to install the SoundStand
Correct installation
Do not place the TV to one side on the
SoundStand
Do not place the SoundStand near the edge of a
TV shelf, table, or entertainment center.
Do not place a TV whose base is bigger than the
SoundStand’s top surface on the SoundStand.
Do not place the TV to one side on the SoundStand. The TV may tip over and may cause physical injury.
Make sure to place the SoundStand in the center of the shelf, table, etc., when you install it. Do not place it
near an edge.
If the TV is bigger than the SoundStand, consider a wall-mounted TV installation or place the SoundStand
on a stable surface.
Keep the SoundStand at least 5 cm away from the wall when you install it.
+ Using the protection pads
Place the included protective pads on top
of the product and then place the TV
stand on top of them to prevent
scratches on the product’s surface.
CONNECTIONS
12
CONNECTIONS
CONNECTING AN EXTERNAL DEVICE USING AN HDMI
CABLE
HDMI is the standard digital interface for connecting to such devices as a TVs, projectors, DVD players, Blu-ray
players, set top boxes, and more.
HDMI prevents any degradation to the signal due to conversion to analogue and maintains the video and audio
quality of the original digital source.
HDMI OUT HDMI IN
HDMI Cable
(not supplied)
HDMI Cable
(not supplied)
Digital Devices
HDMI IN
Connect an HDMI cable (not supplied) from the HDMI IN
jack on the back of the product to the HDMI OUT jack
on your digital device.
and,
HDMI OUT (HDMI)
Connect an HDMI cable (not supplied) from the HDMI
OUT jack on the back of the product to the HDMI IN
jack on your TV.
HDMI is an interface that enables the digital
transmission of video and audio data with just
a single connector.
HDMI OUT (ARC)
The ARC function allows digital audio to output via the
HDMI OUT(ARC) port.
It can be enabled only when the SoundStand is
connected to a TV that supports the ARC function
ANYNET+ must be turned on.
This function is not available if the HDMI cable
does not support ARC.
13
ENG
CONNECTIONS
CONNECTING AN EXTERNAL DEVICE USING OPTICAL
(DIGITAL) CABLE OR AUDIO (ANALOGUE) CABLE
This unit comes equipped with one optical in digital jack and one audio analogue in jack, giving you two ways to
connect it to a TV.
AUX IN
AUDIO
OUT
OPTICAL IN
OPTICAL
OUT
Audio Cable
or
Optical Cable
(not supplied)
BD/ DVD player/
Set-top box/
Game console
OPTICAL IN
Connect OPTICAL IN (Audio) on the main unit to the
OPTICAL OUT jack of the TV or Source Device.
Change the function to D.IN.
Do not connect the power cord of this
product or your TV to the wall outlet until all
connections between components are
complete.
Before moving or installing this product, be
sure to turn off the power and disconnect the
power cord
or,
AUX IN
Connect AUX IN (Audio) on the main unit to the AUDIO
OUT jack of the TV or Source Device.
Change the function to AUX.
HW-H600_H610_EUR_ENG_141028.indd 13HW-H600_H610_EUR_ENG_141028.indd 13 2014-10-28  5:18:162014-10-28  5:18:16
14
FUNCTIONS
INPUT MODE
Press the SOURCE button on the remote control or the ( ) button on the product's top panel to select the
mode you want.
SOURCE
MUTE
POWER
VOL
WOOFER
SOURCE
FUNCTIONS
Input mode Display
Optical Digital input
D.IN
AUX input
AUX
HDMI input
HDMI
BLUETOOTH mode
BT
TV SoundConnect
TV
USB mode
USB
+ Auto Power Down function
The unit turns off automatically in the following situations.
D.IN/HDMI/BT/TV/USB/ARC Mode
- If there is no audio signal for 25 minutes.
AUX Mode
- If the AUX cable is disconnected for 25 minutes.
- If there is no KEY input for 8 hours when the AUX
cable is connected. (Auto Power Down function
can be turned off only in that case.)
To turn off Auto Power Down function, while in AUX
mode, press and hold the
&
button for 5 seconds.
AUTO POWER DOWN ON / OFF appears on the
display.
ARC (HDMI OUT)
HDMI Cable
The ARC function allows digital audio to output via the HDMI OUT (ARC) port.
It can be enabled only when the SoundStand is connected to a TV that supports the ARC function.
ANYNET+ must be turned on.
This function is not available if the HDMI cable does not support ARC.
The ARC function is activated in D.IN mode if you have connected the unit to a TV that supports ARC.
To turn off the ARC function, turn ANYNET+ off.
15
ENG
FUNCTIONS
BLUETOOTH
You can use a Bluetooth device to enjoy music with high quality stereo sound, all without wires!
+ To connect the SoundStand to a Bluetooth device
Check if the Bluetooth device supports the Bluetooth compliant stereo headset function.
Bluetooth device
Connect
1. Press the
SOURCE button on the remote control
or the (
) button on the product's top panel
to
display the BT message.
2. Select the Bluetooth menu on the Bluetooth device
you want to connect. (Refer to the Bluetooth device's
user manual.)
3. Select the Stereo headset menu on the Bluetooth
device.
You will see a list of scanned devices.
4. Select "[Samsung] SoundStand" from the list.
When the SoundStand is connected to the
Bluetooth device, it will display [Bluetooth device
name]
BT on the front display.
The device name can only be displayed in
English. An underline " _ " will be displayed if the
name is not in English.
If the Bluetooth device has failed to pair with the
SoundStand, delete the previous "[Samsung]
SoundStand" found by the Bluetooth device and
have it search for the SoundStand again.
5. Play music on the connected device.
You can listen to the music playing on the
connected Bluetooth device over the
SoundStand.
In BT mode, the Play/Pause/Next/Prev functions
are not available. However, these functions are
available in Bluetooth devices supporting AVRCP.
If asked for PIN code when connecting a
Bluetooth device, enter <0000>.
Only one Bluetooth device can be paired at a
time.
Bluetooth connection will be terminated when
you turn the SoundStand off.
The SoundStand may not perform Bluetooth
search or connection correctly under the
following circumstances:
- If there is a strong electrical field around
the SoundStand.
- If several Bluetooth devices are
simultaneously paired with SoundStand.
- If the Bluetooth device is turned off, not in
place, or malfunctions.
- Note that such devices as microwave
ovens, wireless LAN adaptors, fluorescent
lights, and gas stoves use the same
frequency range as the Bluetooth device,
which can cause electric interference.
The SoundStand supports SBC data
(44.1kHz, 48kHz).
Connect only to a Bluetooth device that
supports the A2DP (AV) function.
You cannot connect the SoundStand to a
Bluetooth device that supports only the HF
(Hands Free) function.
16
FUNCTIONS
+ Bluetooth POWER on (Bluetooth
POWER)
When the Bluetooth Power On function is on and the
SoundStand is turned off, if a previously paired Bluetooth
device tries to pair with the SoundStand, the
SoundStand turns on automatically.
1. Press the Bluetooth POWER button on the remote
control.
2. Bluetooth POWER on appears on the SoundStand's
display.
Available only if the SoundStand is listed
among the Bluetooth device’s paired devices.
(The Bluetooth device and the SoundStand
must have been previously paired at least
once.)
SoundStand will appear in the Bluetooth
device’s searched devices list only when the
SoundStand is displaying [BT READY].
In the TV SoundConnect mode, the
SoundStand cannot be paired to another
Bluetooth device.
+ To disconnect the Bluetooth
device from the SoundStand
You can disconnect the Bluetooth device from the
SoundStand. For instructions, see the Bluetooth device's
user manual.
The SoundStand will be disconnected.
When the SoundStand is disconnected from the
Bluetooth device, the SoundStand will display BT
DISCONNECTED on the front display.
+ To disconnect the SoundStand
from the Bluetooth device
Press the
SOURCE button on the remote control or
the (
) button on the product's top panel
to switch
from BT to another mode or turn off the SoundStand.
The connected Bluetooth device will wait a certain
amount of time for a response from the SoundStand
before terminating the connection. (Disconnection
time may differ, depending on the Bluetooth device)
In Bluetooth connection mode, the Bluetooth
connection will be lost if the distance between
the SoundStand and the Bluetooth device
exceeds 5m.
The SoundStand automatically turns off after
25 minutes in the Ready state.
More About Bluetooth
Bluetooth is a technology that enables Bluetooth-
compliant devices to interconnect easily with each other
using a short wireless connection.
A Bluetooth device may cause noise or malfunction,
depending on usage, when:
- A part of your body is in contact with the
receiving/transmitting system of the Bluetooth
device or the SoundStand.
- It is subject to electrical variation from
obstructions caused by a wall, corner, or office
partition.
- It is exposed to electrical interference from same
frequency-band devices including medical
equipment, microwave ovens, and wireless
LANs.
Pair the SoundStand with the Bluetooth device while
they are close together.
The further the distance between the SoundStand
and Bluetooth device, the worse the quality is.
If the distance exceeds the Bluetooth operational
range, the connection is lost.
In poor reception-sensitivity areas, the Bluetooth
connection may not work properly.
The Bluetooth connection only works when it is close
to the unit. The connection will be automatically cut
off if the Bluetooth device is out of range. Even within
range, the sound quality may be degraded by
obstacles such as walls or doors.
This wireless device may cause electric interference
during its operation.
HW-H600_H610_EUR_ENG_141028.indd 16HW-H600_H610_EUR_ENG_141028.indd 16 2014-10-28  5:18:162014-10-28  5:18:16
17
ENG
FUNCTIONS
NFC
You can connect your SoundStand to an NFC-enabled smart device through a Bluetooth connection with a simple
setup. Once connected, you can enjoy music stored in your smart device through the SoundStand.
+ Connecting with NFC and smart devices
1. Detach the NFC sticker label from the package and attach it to a desired spot.
Putting the NFC sticker within a 3m radius from the unit is recommanded.
Do not attach the NFC sticker on a metallic surface including the SoundStand.
Metallic object may interfere with communication and the NFC sticker may not work properly.
2. Press the
( )
button on the main unit’s top panel or the
SOURCE
button on the remote control to select the BT
mode.
3. Enable the NFC function of your smart device.
4. Bring your smart device’s NFC antenna close to the NFC label.
5. When the connection prompt appears on your smart device’s display, select <Yes>.
Once the connection is established, the completion message appears.
To reconnect once the initial connection had been successful, start from step 3.
+ Disconnecting NFC
Bring your smart device’s NFC antenna close to the NFC label on the SoundStand again. The disconnection message
appears on the smart device's display.
+ To connect another smart device to the SoundStand which is already
connected to another NFC compatible device
Bring the new smart device close to the NFC label of the SoundStand.
The NFC function is implemented in Android v4.1.2 Jelly Bean and later operating systems.
- To make NFC connections, your smart device needs both Android OS 4.1.2 Jelly Bean or later and the
NFC tag for NFC function execution. You also need to download the “Samsung NFC Connection”
application from the Google Playstore and install it on your smart device. For further details, please refer
to the smart device’s user manual.
The location of the NFC antenna is different in different devices. Confirm the location of your smart device’s
antenna in the device's user manual before attempting to pair it with the SoundStand.
If your smart device is in a thick housing or case, the NFC connection may not be stable.
The N-mark is a trade mark or registered trade mark of the NFC Forum Inc. in the United States and other
countries.
If you have trouble with an NFC connection
- Actually touching your smart device to the NFC label can cause NFC connection failure.
- If the “Empty tag” error is displayed on the smart device, please try again.
- Check whether your smart device’s antenna is close enough to the NFC logo.
If you turn off the SoundStand when the Bluetooth Power On feature is ON, and then try to connect a
Bluetooth device that has been previously connected using NFC, the SoundStand will turn on automatically
when the device connects.
To set the Bluetooth Power On option, see page 16.
18
FUNCTIONS
TV SOUNDCONNECT
You can enjoy TV sound through your SoundStand connected to a Samsung TV that supports the TV SoundConnect
function.
+ Connecting a TV to the SoundStand
Connect
1. Turn on the TV and SoundStand.
Turn on the menu of the TV.
Move to Speaker Settings on "Sound" tab.
Set the "Add New Device" menu to "On".
2. Press the ( ) button on the main unit’s top panel or
the SOURCE button on the remote control to select
the TV mode.
3. On the TV, a message asking whether to enable the TV
SoundConnect function. "[Samsung] SoundStand" is
displayed on the TV screen.
4. Select <Yes> to finish connecting the TV and
SoundStand by TV remote control.
Switching the SoundStand’s mode from TV to
another automatically terminates TV
SoundConnect.
To connect the SoundStand to another TV, the
existing connection must be terminated.
Terminate the connection to the existing TV,
then press the
button on the remote control
for 5 seconds to connect to another TV.
The TV SoundConnect (SoundShare) function is
supported by some Samsung TVs released from
2012 on. Check whether your TV supports the TV
SoundConnect (SoundShare) function before you
begin. (For further information, refer to the TV’s
user manual.)
If your Samsung TV is released before 2014,
check the SoundShare setting menu.
If the distance between the TV and
SoundStand exceeds 5m, the connection may
not be stable or the audio may stutter. If this
occurs, relocate the TV or SoundStand so that
they are within operational range, and then
re-establish the TV SoundConnect connection.
TV SoundConnect Operational Range
- Recommended pairing range: within
50cm
- Recommended operational range: within
5m
Play/Pause, Next, Prev buttons are not
operable in TV SoundConnect mode
+ Using the Bluetooth POWER On
function
The Bluetooth POWER On function is available after you
have successfully connected the SoundStand to a
Bluetooth compatible TV using TV SoundConnect.
When the Bluetooth POWER On function is ON, turning
the connected TV on or off will turn the SoundStand's
power on and off as well.
1. Connect the TV with your SoundStand using the TV
SoundConnect function.
2. Press the Bluetooth POWER button on the
SoundStand remote. "BLUETOOTH POWER ON"
appears on the SoundStand's display.
BLUETOOTH POWER ON : The SoundStand
turns on and off when you turn the TV on or off.
BLUETOOTH POWER OFF : The SoundStand
only turns off when you turn the TV off.
This function is supported only by some
Samsung TVs released from 2013 on.
HW-H600_H610_EUR_ENG_141028.indd 18HW-H600_H610_EUR_ENG_141028.indd 18 2014-10-28  5:18:242014-10-28  5:18:24
19
ENG
FUNCTIONS
USB
You can play music files located on USB storage devices through the SoundStand.
Display
USB port
1. Connect the USB device to the USB port on the
back of the product.
2. Press the
SOURCE button on the remote control
or the (
) button on the product's top panel
repeatedly until USB appears.
3. USB appears on the display screen.
The SoundStand connection to the USB device
is complete.
The SoundStand automatically turns off (Auto
Power Off) if no USB device has been connected
for more than 25 minutes.
+ Before you connect a USB device
Be aware of the following:
If the file name of a file or folder on a USB device
exceeds 10 characters, it is not displayed on the
SoundStand's display.
This product may not be compatible with certain
types of USB storage media.
The SoundStand supports the FAT16 and FAT32 file
systems.
- The NTFS file system is not supported.
Connect USB devices directly to the USB port of the
product. Otherwise, you may encounter a USB
compatibility problem.
Do not connect multiple storage devices to the
product via a multi-card reader. It may not operate
properly.
Digital camera PTP protocols are not supported.
Do not remove the USB device while it is being read.
DRM-protected music files (MP3, WMA) from a
commercial web site cannot be played.
External HDDs are not supported.
Mobile phone devices are not supported.
File Format Type Compatibility list:
Format Codec Sampling Rate
*.mp3
MPEG 1 Layer2
16KHz ~ 48KHz
MPEG 1 Layer3
MPEG 2 Layer3
MPEG 2.5 Layer3
*.wma
Wave_Format_
MSAudio1
Wave_Format_
MSAudio2
*.aac
AAC
16KHz ~ 96KHz
AAC-LC
HE-AAC 24KHz ~ 96KHz
*.wav
-
16KHz ~ 48KHz
*.ogg
OGG 1.1.0
*.flac
FLAC 1.1.0,
FLAC 1.2.1
16KHz ~ 96KHz
FUNCTIONS
20
Samsung may offer upgrades for the SoundStand's
system firmware in the future.
If an upgrade is offered, you can upgrade the firmware
by connecting a USB device with the firmware upgrade
stored on it to the USB port on your SoundStand.
Note that if there are multiple upgrade files, you must
load them onto the USB device singly and use them to
upgrade the firmware one at a time.
Please visit samsung.com or contact the Samsung call
centre to receive more information about downloading
upgrades files.
Insert a USB device containing the firmware
upgrade into the USB port on the main unit.
Do not disconnect the power or remove the
USB device while upgrades are being
applied. The main unit will turn off
automatically after completing the firmware
upgrade.
When software is upgraded, all settings are
reset to their factory default settings.
We recommend you write down your settings
so that you can easily reset them after the
upgrade.
Once the software upgrade is completed,
turn off the product and then press and hold
the (►) button for a while to reset the
product.
If the firmware fails to upgrade, we
recommend formatting the USB device in
FAT16 and trying again.
Do not format the USB device in the NTFS
format. The SoundStand does not support
the NTFS file system.
Depending on the manufacturer, some USB
devices may not be supported.
SOFTWARE UPGRADE
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46

Samsung HW-H600 ユーザーマニュアル

タイプ
ユーザーマニュアル

他の言語で