SoundTouch 20 Series II

Bose SoundTouch 20 Series II, SoundTouch 30 series II 取扱説明書

  • こんにちは!Bose SoundTouch 30/20シリーズII Wi-Fiミュージックシステムのユーザーガイドの内容を熟読しました。システムのセットアップから機能の詳細、トラブルシューティングまで、あらゆる質問にお答えできますので、お気軽にご質問ください。例えば、Wi-Fi接続方法やプリセットの設定方法、AirPlayの使い方など、何でも聞いてください!
  • システムをWi-Fiネットワークに接続するにはどうすればよいですか?
    プリセットを設定するにはどうすればよいですか?
    リモコンの電池交換方法は?
    システムのソフトウェアを更新するにはどうすればよいですか?
    システムの動作温度範囲は?
Owner’s Guide
2 - English
Please take the time to carefully read and follow these Important Safety Instructions. They will help you set
up and operate your system properly and enjoy its advanced features. Save this guide for future reference.
The lightning flash with arrowhead symbol within an equilateral triangle alerts the user to the
presence of uninsulated, dangerous voltage within the system enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle alerts the user to the presence of important
operating and maintenance instructions in the owner’s guide.
WARNINGS:
To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
Do not expose this apparatus to dripping or splashing, and do not place objects filled with
liquids, such as vases, on or near the apparatus. As with any electronic products, use care not to
spill liquids into any part of the product. Liquids can cause a failure and/or a fire hazard.
Keep new and used batteries away from children. Do not ingest battery, chemical burn hazard.
The remote control supplied with this product contains a coin/button cell battery. If the coin/
button cell battery is swallowed it can cause severe internal burns in just 2 hours and can lead
to death. If the battery compartment does not close securely, stop using the product. If you
think the battery may have been swallowed or placed inside any part of the body seek immedi-
ate medical attention. May explode or cause a fire or chemical burn if incorrectly replaced or
mishandled. Do not recharge, disassemble, heat above 212°F (100°C), or incinerate. Replace
only with an agency approved (ex. UL) CR2032 or DL2032 3-volt lithium battery. Dispose of used
batteries promptly.
Do not place naked flame sources, such as lighted candles, on or near the apparatus.
WARNING: Contains small parts which may be a choking hazard. Not suitable for children under
age 3.
Please dispose of used batteries properly, following local regulations.
Do not incinerate.
This symbol means the product must not be discarded as household waste, and should be
delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps
protect natural resources, human health and the environment. For more information on disposal
and recycling of this product, contact your local municipality, disposal service, or the shop where
you bought this product.
Important Safety Instructions
English - 3
Important Safety Instructions
The product contains magnetic material. Please contact your physician if you have any questions
on whether this might affect the operation of your implantable medical device.
CAUTION:
Make no modifications to the system or accessories. Unauthorized alterations may compromise
safety, regulatory co mpliance, and system performance.
NOTES:
Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device
shall remain readily operable.
This product must be used indoors. It is neither designed nor tested for use outdoors, in recreation
vehicles, or on boats.
The product label can either be located on the back or bottom of the system.
Operate this product within the temperature range of –4º F to 113º F (–20º C to 45º C).
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water or moisture.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources, such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Protect the power cord from being walked on or pinched, particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
10. Only use attachments/accessories specified by the manufacturer.
11. Unplug this apparatus during lightning storms or when unused for long periods of time.
12. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way: such as power supply cord or plug is damaged; liquid has been spilled or
objects have fallen into the apparatus; the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
4 - English
Regulatory Guidelines
CAN ICES-3 (B)/NMB-3(B)
Information about products that generate electrical noise
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a different circuit than the one to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC WARNING
Changes or modifications not expressly approved by Bose Corporation could void the user’s authority to
operate this equipment.
Important USA and Canada compliance Information
This device complies with part 15 of the FCC rules and Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired
operation.
This equipment complies with FCC and Industry Canada radiation exposure limits set forth for an uncon-
trolled environment. This equipment should be installed and operated with a minimum distance of 20 cm
between radiator and your body.
This device complies with Industry Canada licence-exempt RSS standards(s).
Bose Corporation hereby declares that this product is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC and all other applicable
EU directive requirements. The complete declaration of conformity can be found at:
www.Bose.com/compliance.
English - 5
Regulatory Guidelines
Names and Contents of Toxic or Hazardous Substances or Elements
Toxic or Hazardous Substances and Elements
Part Name
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
(CR(VI))
Polybrominated Biphenyl
(PBB)
Polybrominated diphenylether
(PBDE)
PCBs X
O O O O O
Metal parts X O O O O O
Plastic parts O O O O O O
Speakers X O O O O O
Cables X O O O O O
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in
SJ/T 11363-2006.
X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit
requirement in SJ/T 11363-2006.
Please complete and retain for your records
The serial and model number can be found on the back or bottom of the system.
Serial number: ___________________________________________________________________
Model number: ___________________________________________________________________
Purchase date: ___________________________________________________________________
We suggest you keep your receipt in a safe place.
AirPlay works with iPhone, iPad, and iPod touch with iOS 4.3.3 or later, Mac with OS X Mountain Lion or later,
and PC with iTunes 10.2.2 or later
.
AirPlay, iPad, iPhone, iPod, iPod touch, iTunes, Mac and OS X are trademarks of Apple Inc., registered in the
U.S. and other countries. The trademark “iPhone” is used with a license from Aiphone K.K. App Store is a
service mark of Apple Inc.
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed
to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet
Apple performance standards. Apple is not responsible for the operation of this device or its compliance with
safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect
wireless performance.
Android and Google Play are trademarks of Google Inc.
SoundTouch and the wireless note design are trademarks of Bose Corporation in the U.S. and other countries.
Wi-Fi is a registered mark of the Wi-Fi Alliance.
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
© 2014 Bose Corporation. No part of this work may be reproduced, modified, distributed, or otherwise used
without prior written permission.
6 - English
Contents
Presenting SoundTouch
from Bose
®
Key benefits .............................................................................................................. 8
Introduction
About your SoundTouch
30/20 system .................................................................... 9
System features....................................................................................................... 9
Setting up the System
Unpacking the system .................................................................................................... 10
Connecting the system to power ................................................................................. 11
Adding the system to your Wi-Fi
®
network ................................................................ 11
Add the system to an existing SoundTouch™ account .................................... 11
Download and install the SoundTouch™ app ..................................................... 12
Connect the system to your home Wi-Fi
®
network ........................................... 12
Using the System
Powering on the system................................................................................................. 13
Getting system information .......................................................................................... 13
Messages on the display ........................................................................................ 14
Wi-Fi
®
Indicator ........................................................................................................ 15
System control buttons ................................................................................................. 15
Controlling the System using the App
Using the SoundTouch
app ........................................................................................ 16
Getting help .............................................................................................................. 16
Controlling the system from another smartphone,
tablet, or computer ................................................................................................. 16
Personalizing Your Presets
How Presets work ............................................................................................................ 17
What you need to know .......................................................................................... 17
Playing a Preset ............................................................................................................... 17
Setting a Preset ............................................................................................................... 18
Listening to Other Sources
Playing music from other sources ................................................................................ 19
Playing an AirPlay stream from an AirPlay compatible device ....................... 19
Connecting an audio device to the system ........................................................ 19
English - 7
Contents
Advanced Features
Updating system software ............................................................................................ 20
Disabling Wi-Fi
®
capability ............................................................................................. 20
Re-enabling Wi-Fi
®
capability ........................................................................................ 21
Resetting the system ..................................................................................................... 21
Care and Maintenance
Troubleshooting .............................................................................................................. 22
Rebooting your system .......................................................................................... 23
Cleaning ............................................................................................................................. 24
Replacing the remote control battery ......................................................................... 24
Customer service ............................................................................................................. 25
Limited warranty information ....................................................................................... 25
Technical Information
SoundTouch
30 system............................................................................................... 26
SoundTouch
20 system ............................................................................................... 26
Appendix: Setting up using a Computer
Important setup information ........................................................................................ 27
Using a desktop computer for setup ................................................................... 27
Setting up the system using a computer ................................................................... 27
8 - English
Presenting SoundTouch
from Bose
®
With SoundTouch
, you can stream Internet radio, music services, and your music
library. If you have Wi-Fi
®
at home, you’re ready to enjoy your favorite music in any
room you want.
Key benefits
Enjoy wireless access to Internet radio, music services and your music library.
Wireless setup using your smartphone or tablet.
Stream your favorite music easily with personalized Presets.
Works with your existing home Wi-Fi network.
Free SoundTouch
app for your computer, smartphone, or tablet provides more
powerful control.
Simply add additional systems at any time for a multi-room listening experience.
Wide selection of Bose
®
audio systems lets you choose the right solution for
any room.
English - 9
Introduction
About your SoundTouch
30/20 system
Your SoundTouch
Wi-Fi
®
music system provides clear, room-filling sound
streamed wirelessly over your home Wi-Fi network. Use the free SoundTouch
app
to set up and control your system. See “Adding the system to your Wi-Fi
®
network”
on page 11.
System features
Six Presets on the system and its remote deliver your music with just one touch.
1.6-in. display communicates system status and information.
Stream your music via AirPlay from select iPod, iPhone, or iPad devices.
Remote control for point-and-click control from up to 20 feet away.
Thumbs up/Thumbs down buttons on remote control for customized listening.
AUX connector enables playback from an external media player.
Ethernet connector enables wired access to your home network.
10 - English
Setting up the System
Unpacking the system
Carefully unpack the carton and confirm that the following parts are included.
SoundTouch
Wi-Fi
®
music system
Power cord
Remote control
USB cable
(computer setup only)
May ship with multiple power cords. Use the power cord for your region.
Note: If part of the system is damaged, do not use it. Contact your authorized
Bose
®
dealer or Bose customer service. Refer to the quick start guide in the
carton for contact information.
Save the carton and packing materials for transporting or storing the system.
English - 11
Setting up the System
Connecting the system to power
Before you set up the system on your network, connect the system to power.
1. Plug the power cord into the POWER connector on the system.
2. Plug the other end of the power cord into an AC (mains) power outlet.
Adding the system to your Wi-Fi
®
network
After you connect the system to power, you must download and install the
SoundTouch
app onto a smartphone or tablet that is connected to your network.
The app guides you through connecting the system to your network.
Note: If you do not have a smartphone or tablet, you can use a computer for
setup. See page 27.
Add the system to an existing SoundTouch™ account
If you have already set up SoundTouch
for another system, you do not need to
download the SoundTouch
app again.
1. On your smartphone or tablet, select the SoundTouch
icon to
launch the app.
2. Select EXPLORE > SETTINGS > Systems > ADD SYSTEM to add
another system.
The app guides you through setup.
12 - English
Setting up the System
Download and install the SoundTouch™ app
If this is your first time setting up a SoundTouch
system, you must install the app.
On your smartphone or tablet, download the SoundTouch
controller app.
Bose SoundTouch
TM
controller app
iOS users: download from the App Store
Android
users: download from the Google Play
store
Connect the system to your home Wi-Fi
®
network
After you install the app, add the system to your network:
1. On your smartphone or tablet, select
to launch the app.
The app guides you through connecting the system to your Wi-Fi network.
2. Follow the instructions in the app to complete setup, including creating a
SoundTouch
account, adding a music library and music services.
English - 13
Using the System
Powering on the system
On the button pad or the remote control, press Power . The display may show
an icon, message, or Now Playing information, depending on system state. For a
list of icons that may appear on the display, see page 14.
Tip: You can also press a Preset or
to power on the system.
Getting system information
The front of the system shows information via the display and the Wi-Fi
®
indicator.
Display: shows system messages and Now Playing information (see page 14).
Wi-Fi indicator: shows Wi-Fi status (page 15).
Front panel of the system
Wi-Fi
®
indicator
Display
14 - English
Using the System
Messages on the display
The display shows system information and icons, and may include album or artist.
Display icon Description
Appears at initial power on. Instructs you to refer to setup instructions
Internet radio is playing
AirPlay mode is active
Volume is being adjusted
Music library is playing
Multi-room audio is active
Auxiliary mode is active
Preset is selected
Skipping forward to the next track
Skipping backward to the previous track
Audio is paused
Audio is stopped
English - 15
Using the System
Wi-Fi
®
Indicator
The Wi-Fi indicator on the front of the system indicates Wi-Fi status.
Indicator activity System state
Blinking white Connecting to Wi-Fi network
Solid white (dim) Power saving mode and connected to Wi-Fi network
Solid white (bright) System is on and connected to Wi-Fi network
Blinking amber Disconnected from Wi-Fi network
Solid amber System is in setup mode
Off Networking disabled or system connected to Ethernet
System control buttons
The system controls reside on the button pad and on the remote control.
You can also control the system using the SoundTouch
app (see page 16).
Button pad: enables you to power the system, set and play your Presets,
adjust the volume, and activate auxiliary mode.
Remote control: enables the same functionality as the button pad, plus:
skip backward/skip forward and play/pause, and Thumbs up and Thumbs down.
Button Description
Power: Press to power on/off the system
Six Preset buttons:
Press and hold to set a Preset to what is currently playing
Press a Preset to play it
+
Volume Up/Volume Down: Press to increase/decrease volume
Auxiliary mode: Press to listen to device plugged into AUX connector
Skip Backward/Skip Forward: Press to skip tracks (remote control only)
Play/Pause: Press to toggle play or pause audio
Mute/Unmute: Press to mute or unmute a device connected to AUX
(remote control only)
Thumbs Up/Thumbs Down: Press to like/dislike the currently playing
selection
16 - English
Controlling the System using the App
Using the SoundTouch
app
The SoundTouch
app is a software application that enables you to set up and
control SoundTouch
from your smartphone, tablet, or computer. Using the app,
your smart device acts as a rich remote for your SoundTouch
system.
The app enables you to manage your SoundTouch
settings, add music services,
explore local and global Internet radio stations, set and change Presets, stream
music to the system, view what is playing, plus much more.
After you set up the system on your network using the SoundTouch
app, you are
ready to explore streaming music and personalize your Presets.
Getting help
If you need more information on using the system, use Help Tips or in-app help.
Help Tips
After setup is complete helpful tips appear on the screen, based on the task you
are trying to complete. These tips instruct you how to use the system, including
how to personalize your Presets.
To activate the tips
If you have deactivated tips, follow these instructions to re-activate tips.
1. Launch the SoundTouch
app and click EXPLORE > SETTINGS > Help Tips.
2. Slide the SHOW TIPS slider to ON.
In-app help
For information about using SoundTouch
:
1. Click EXPLORE > HELP in the app.
2. Browse through the help topics.
Controlling the system from another smartphone,
tablet, or computer
Once you set up the SoundTouch
system on your home Wi-Fi
®
network, you can
control the system from any smartphone, tablet, or computer on the same network.
1. Connect the device to the same network as your system.
2. On the device, download and install the SoundTouch
app:
If you are using a smartphone or tablet, see page 12.
If you are using a computer, open a browser and go to:
SoundTouch.com/app
English - 17
Personalizing your Presets
How Presets work
You can personalize six Presets to your favorite streaming music services, stations,
playlists, artists, albums or songs from your music library. You can access your
music, at any time, with a simple touch of a button on the SoundTouch
system or
its remote control.
Tip: You can also access your Presets using the SoundTouch
app on your
computer, smartphone, or tablet.
What you need to know
You can set Presets from the app, the button pad and the remote control.
If the Preset source is your iTunes or Windows Media Player music library,
ensure the computer storing your music library is on and connected to the
same network as the SoundTouch
system.
You cannot set Presets from an AirPlay stream or audio device connected
to AUX.
Playing a Preset
Once you personalize your Presets using the app, press a Preset on the button pad
or on the remote control to play it. If you have not set your Presets, launch the app
and set your Presets. For help, refer to the in-app help.
If using the remote control, aim the remote toward the system while pressing a
Preset on the remote.
Music plays on the system. Information appears on the display, which may include
an icon, song or station depending on the source. See page 14.
Note: If no music plays and a Preset unassigned message appears on the
display, see “Setting a Preset” on page 18.
18 - English
Personalizing your Presets
Setting a Preset
1. Stream music to the system using the app.
2. While the music is playing, press and hold a Preset on the button pad or
remote control (about 2 seconds).
The system emits a tone when the Preset is set. A New Preset assigned
message appears on the display.
Note: For information on using the SoundTouch
app to set and change your
Presets, refer to the in-app help.
English - 19
Listening to other Sources
Playing music from other sources
Using the SoundTouch
system, you can listen to music stored on a smartphone,
tablet, computer or other type of audio device by either connecting a device to the
AUX connector or playing an AirPlay
®
stream via Wi-Fi
®
.
Playing an AirPlay stream from an AirPlay compatible device
After connecting the SoundTouch
system to your network, it is ready to stream
audio from an AirPlay device on the same Wi-Fi network.
1. Start a music app on your AirPlay device.
2. On the device, tap or click
and select the SoundTouch
system name
(assigned during setup).
3. Start playing music from a music app.
Connecting an audio device to the system
You can connect the audio output of a smartphone, tablet, computer or other type
of audio device to the AUX IN connector. The AUX IN connector accepts a 3.5 mm
stereo cable plug (not provided).
1. Using a stereo cable, connect your audio device to the AUX IN connector on
the system.
2. Press on the button pad or remote control.
3. Start playing music on the audio device.
20 - English
Advanced Features
Updating system software
The app alerts you when a software update is available. However, you can also
update system software using the button pad.
1. Press
to power the system on.
2. On the button pad, press and hold
and
(about 5 seconds).
The display shows a countdown from 5-1. A progress bar indicates status.
An update complete message appears on the display.
Disabling Wi-Fi
®
capability
The system has built-in Wi-Fi capability that enables wireless connectivity
and AirPlay.
1. Press
to power the system on.
2. On the button pad, press and hold
and
(about 5 seconds).
The display shows a countdown from 5-1 and a message similar to
Hold to disable networking appears on the display.
The Wi-Fi indicator turns off when Wi-Fi is disabled.
/