Model: R5132
51005001270 V01
User Manual
Roav SmartCharge F3
01
日本語
01
English
16
02
安全上のご注意
パッケージ内容
外観
LEDディスプレイガイド
07
08 FM
1.F3のボタンを使用する
2.RoavChargerアプリを使用する
11
12
13
14
15
02
03
Roav SmartCharge F3 (R5132)
•
•
•
•
•
•
•
•
•
•
• -
63V DC /
7A
•
04
05
Owner’s Manual
ManualRoav SmartCharge F3
Quick Charge 3.0
USB
AUX
USB
LED
M /
•
/
CH
• FM
microSD
5 /
LED
LED
NOTCONNECTED
Bluetooth
FM
90.0
*
FM
Bluetooth
Roav SmartCharge F3
06
07
LED
NO CARD
microSD
WAITING...
microSD
CARD ERROR
NO USB DISK
USB
WAITING...
USB
USB ERROR
USB
1
M
USB
1
UI
LED
Roav
App Store (iOS 10.2 )
Google Play (Android 5.0
) Roav Charger
Roav Charger
Bluetooth
Bluetooth
Roav F3_XXXX
08
09
Roav F3_XXXX
FM
Roav SmartCharge F3 FM
2
1. F3
F3CH 1
F3FM
FM F3FM
FM
a. F3 CH
FMLED
b.
FM
FM
FM
2. Roav Charger
Roav ChargerFM
FM
SmartScan(a)
Roav Charger
(b)
10
11
90
MHz
Set
76
MHz
90
MHz
76
MHz
SmartScan
83.2
MHz
Preset stations
?
76.1
MHz
89.9
MHz
a
b
FM Roav Charger
3.5mmAUX
FM AUX
USBmicroSD
USB
/
/
M
12
13
Roav
AUX
AUX IN 3.5 mm AUX
()
FM
AUX IN
/
2
2 USB (5V/1A
Quick Charge 3.0 ) 22 W2
14
15
DC12V - 24V
Quick Charge 3.03.6V-6.5V
3A , 6.5V-9V 2A,
9V-12V 1.5A
Bluetooth: V4.2
Bluetooth10 m / 32.8 ft
USB.mp3 .wma .flac .wav
FM78-90 MHz
FM2 m / 78.7 in
USBFAT, FAT32, exFAT
-20°C ~ 40°C/ -4°F ~ 104°F
-40°C ~ 85°C/ -40°F ~ 185°F
/
AppleApple
Apple Inc. App Store
Apple Inc.
Google Play Google PlayGoogle LCC.
16 English English 17
Table of Contents
17 Safety Instructions
Important Safety Instructions
What’s Included
At a Glance
LED Display Guide
21 Getting Started
23 FM Transmitter
1. Use the F3
2. Use the Roav Charger App
25 Playing Music
27 Hands-Free Calling
27 Charging Your Devices
28 Specifications
29 Notice
Safety Instructions
Important Safety Instructions
SAVE THESE INSTRUCTIONS – This manual contains important
safety and operating instructions for the car charger of Roav
SmartCharge F3 (R5132).
Please read and understand all instructions before using this
product. If damage is caused by failure to follow the instructions,
the warranty does not apply.
• Read all instructions and cautionary markings before using
this product.
• Do not expose to rain, moisture, or snow.
• Use of an attachment is not recommended or sold by the
manufacturer may result in a risk of fire, electric shock, or
injury to persons.
• Do not operate this car charger if it has received a sharp blow,
been dropped, or otherwise damaged in any way; take it to a
qualified service person.
• Do not disassemble this car charger; take it to a qualified
service person when service or repair is required. Incorrect
reassembly may result in a risk of electric shock or fire.
• To reduce risk of electric shock, unplug this car charger before
attempting any maintenance or cleaning. Turning o controls
will not reduce this risk.
• To reduce risk of fire or electric shock, do not interconnect
output terminations.
18 English English 19
What’s Included
Owner’s Manual
ManualRoav SmartCharge F3
At a Glance
• Avoid long exposure to direct sunlight, which may cause
damage to the device.
• Exposing this product to open flames may cause it to explode.
• Do not use this product in strong magnetic fields.
• Use a dry, soft lint-free cloth to clean. Do not use any
corrosive cleaner or oil to clean.
• CAUTION - For continued protection against risk of fire,
replace only with the same type and ratings of fuse, fuse
rating is 63V DC / 7A.
• Always obey trac laws and pay attention to the road. Do
not attempt to use this device while driving, as some features
are limited while the vehicle is in motion. Failure to pay full
attention to the operation of your vehicle could result in
death, serious injury or property damage. You assume total
responsibility and risk for using this device.
20 English English 21
LED Display Status
WAITING...
Reading a microSD card
CARD ERROR
A card error has occurred and the card
cannot be read.
NO USB DISK
No USB drive detected
WAITING...
Reading a USB drive
USB ERROR
A USB error has occurred and the USB
drive cannot be read.
1
Press and hold M.
When the USB drive or microSD card is
read, music mode shows from left to right:
Shue, Repeat All, Repeat One
The UI is subject to change without notice.
Getting Started
Plug Roav SmartCharge F3 into your vehicle’s cigarette
lighter socket.
Start your vehicle’s engine.
The LED display will light up, and show the Roav logo and
current voltage of the car battery.
Quick Charge 3.0 USB port
AUX socket
Microphone
USB port
LED display
M /Mode button
• Press to switch between
dierent modes.
/ Multi-function button
CH
• Press to display the FM
frequency.
MicroSD card slot
Car Charger
Press and hold for 5 seconds to power on/o.
LED Display Guide
LED Display Status
NOTCONNECTED
flashes
Bluetooth not connected
FM
90.0
*The FM frequency
may vary depending
on the default setting.
Bluetooth connected
NO CARD
No microSD card detected
22 English English 23
FM Transmitter
The Roav SmartCharge F3 allows you to connect your phone to
your car’s stereo via FM signal. There are two ways to set up:
1. Use the F3
Press and hold CH for one second when using the F3 for the
first time.
F3 begins to search an unoccupied FM frequency.
Turn on the FM radio in your car and tune it to the FM
frequency set on the F3.
To customize your FM frequency:
a. Press CH on F3.
FM frequency displays on the LED screen.
b. Press
to select a FM frequency. Make sure the
transmitting frequency matches the frequency your radio
is tuned to.
FM
FM
Download the Roav Charger app from the App Store
(smartphones running iOS 10.2 or higher) or Google Play
(smartphones running Android 5.0 or higher).
Roav Charger
Enable Bluetooth on your smartphone and search for
available Bluetooth devices.
Select “Roav F3_XXXX”and connect.
Once successfully connected, will stop flashing.
Roav F3_XXXX
24 English English 25
Tap “Set”. Once chosen, the previous presets are replaced by
the new ones.
Turn on the FM radio in your car and tune to a frequency that
matches the frequency set on the Roav Charger App.
Play audio from your phone.
You will hear the audio from the car stereo.
You can also connect the car charger to your car’s
stereo by using a 3.5mm AUX cable.
Playing Music
When the car charger F3 is successfully connected to your
smartphone, you can press the multi-functional button
to
play music from your phone. Music can then be streamed to
your car’s sound system via FM transmitter or the AUX socket.
You can also insert a USB flash drive or a microSD card to enjoy
music that is stored on these devices.
USB
2. Use the Roav Charger App
Follow the on-screen instructions in the Roav Charger app to
complete connection via FM Radio.
Tap the “FM radio”.
Tap “SmartScan” (Figure a).
The Roav Charger App begins to search an unoccupied
frequency.
Press and hold one preset station to customize stations.
Adjust the slider or tap to choose a radio frequency
(Figure b).
90
MHz
Set
76
MHz
90
MHz
76
MHz
SmartScan
83.2
MHz
Preset stations
?
76.1
MHz
89.9
MHz
a
b
26 English English 27
Hands-Free Calling
When the car charger is successfully connected to your
smartphone, you can enjoy convenient hands-free calling.
Answer / End a call
Press
Reject a call
Press and hold
for 2
seconds
Charging Your Devices
Roav SmartCharge F3 has two USB charging ports (one 5V/1A
output port and one Quick Charge 3.0 port). You can charge two
devices at the same time with a maximum output of 22W.
Play / Pause
Press
Previous / Next track
Press
Select a music mode
Press and hold M. Press
To further reduce echo and background noise on your calls and
music, you can connect a 3.5 mm AUX cable (not provided)
to the AUX socket of the car charger and the AUX-In socket of
your car’s audio system.
FM
AUX IN
28 English English 29
Notice
This product complies with the radio interference
requirements of the European Community.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this device is in
compliance with the essential requirements and other relevant
provisions of Directive 2014/53/EU. For the declaration of
conformity, visit the Web site www.goroav.com.
This product can be used across EU member states.
The product shall only be connected to a USB Interface of
version 2.0 or higher.
The device complies with RF specifications when the device
used at 20mm from your body.
BT Operating Frequency Range: 2402-2480 MHz; BT Max
Output Power: 8dBm
The following importer is the responsible party (contact for EU
matters only)
Importer: Anker Technology (UK) Ltd
Importer Address: Suite B, Fairgate House, 205 Kings Road,
Tyseley, Birmingham, B11 2AA, United Kingdom
This product is designed and manufactured with
high quality materials and components, which can
be recycled and reused.
Specifications
Specifications are subject to change without notice.
DC input: 12V - 24V
Quick Charge 3.0 output: 3.6V-6.5V
3A , 6.5V-9V 2A,
9V-12V 1.5A
Bluetooth: V4.2
Bluetooth transmission distance: 10 m / 32.8 ft
USB audio format: .mp3 .wma .flac .wav
FM frequency range: 78-90 MHz
FM transmission range: 2 m / 78.7 in
USB file system: FAT, FAT32, exFAT
Operating temperature range: -20°C to 40°C/ -4°F to 104°F
Storage temperature range: -40°C to 85°C/ -40°F to 185°F
30 English English 31
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more
of the following measures: (1) Reorient or relocate the receiving
antenna. (2) Increase the separation between the equipment and
receiver. (3) Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected. (4) Consult
the dealer or an experienced radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure
requirements. The device can be used in fixed/mobile exposure
condition. The min separation distance is 20cm.
The following importer is the responsible party:
Company Name: Fantasia Trading LLC
Address: 9155 Archibald Avenue, Suite 202,
Rancho Cucamonga , CA 91730, USA
Telephone:1-909-484-1530
Trademark
Apple and the Apple logo are trademarks of Apple Inc.,
registered in the U.S. and other countries. App Store is a service
mark of Apple Inc., registered in the U.S. and other countries.
Google Play and the Google Play logo are trademarks of Google
LLC.
This symbol means the product must not be
discarded as household waste, and should be
delivered to an appropriate collection facility for
recycling. Proper disposal and recycling helps
protect natural resources, human health and the
environment. For more information on disposal
and recycling of this product, contact your local
municipality, disposal service, or the shop where
you bought this product.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
Warning: Changes or modifications not expressly approved
by the party responsible for compliance could void the user's
authority to operate the equipment.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation.
This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
Customer Service
18-month limited warranty
Lifetime technical support
support@anker.com
03-4455-7823 (9:00-17:00)
@GoRoav
@GoRoav
/
