Sony SAL70200G ユーザーガイド

カテゴリー
カメラレンズ
タイプ
ユーザーガイド
32
1
4
5
6
7
8
9
11 1012
18
17
16
15
14
13
–1
(1) (2)
A
E
E
2
1 2 3
4 5 6 ( )
7 ( ) ( ) 8 ( )
9 10 11 12
13 14
15 DMF
16
17 18
(
)
1
(1) (2) 2
(2)
2
(
)
(1)
90 ( )
( )
(2)
1
2
(1)
3
(SET/RELEASE
) (
) (3)
4
(4)
( )
(1)
(2)
( )
Focusing
To switch AF (auto focus)/MF (manual focus)
The focus mode can be switched between AF and MF on the lens.
For AF photography, both the camera and lens should be set to AF. For MF
photography, either or both the camera or lens should be set to MF.
To set the focus mode on the lens
Slide the focus-mode switch to the appropriate mode, AF or MF (1).
In MF, turn the focusing ring to adjust the focus (2) while looking through the
viewfinder, etc.
To use a camera equipped with an AF/MF control button
Press the AF/MF control button to switch AF to MF when both the camera and
lens are set to AF.
Press the AF/MF control button to switch MF to AF when the camera is set to
MF and the lens is set to AF.
Direct manual focus (DMF)
Even when AF is set, the setting is switched to MF automatically if you rotate
the focusing ring while pressing the shutter button halfway. This provides
quick fine adjustment of focusing (DMF). Select the mode for correct DMF
from the following. Set the DMF-mode switch to whichever you prefer.
Standard DMF (STD.)
Rotate the focusing ring to set correct DMF when the focus is locked in AF-A
(automatic auto focus) or AF-S (single-shot auto focus). Using this mode is
recommended for normal subjects.
DMF is not available in AF-C (continuous auto focus), when out of focus, or
with continuous advance in AF-A after the second focus is confirmed.
Full-time DMF (F TIME)
In any AF mode (AF-A/S/C), rotate the focusing ring while pressing the
shutter button halfway to set correct DMF. This is useful to catch a fast-
moving subject.
Shooting at infinity in MF
The focusing mechanism turns slightly past infinity to provide accurate
focusing under various operating temperatures. Always confirm the image
sharpness through the viewfinder, etc., especially when the lens is focused
near infinity.
Using focus-hold buttons
This lens has 3 focus-hold buttons.
Press the focus-hold button in AF to cancel AF. The focus is fixed and you
can release the shutter on the fixed focus. Release the focus-hold button while
pressing the shutter button halfway to start AF again.
The function of the focus-hold button can be changed on cameras with custom
function capability. Refer to the camera manuals for details.
Switching focus range (AF range)
The focus-range limiter enables you to reduce the auto focusing time. This is
useful when the subject distance is definite. You can also set the desired focus
range and select it.
Slide the focus-range limiter to select the focus range.
FULL: AF is set to the minimum focusing distance to infinity.
∞ - 3m: AF is set to 3 m (9.8 feet) to infinity.
Depth-of-field table
The sets of three numbers, upper, middle, and bottom, are for 70 mm,
105 mm, and 200 mm focal length respectively, in meters.
The depth-of-field table is for 35mm-format cameras. The depth-of-field is
shallower when you use Interchangeable Lens Digital Cameras equipped with
an APS-C sized image sensor.
Specifications
Name (Model name) 70-200mm F2.8 G (SAL70200G)
Equivalent 35mm-format focal length*
1
(mm)
105-300
Lens groups-elements
16-19
Angle of view 1*
2
34°-12°30’
Angle of view 2*
2
23°-8°
Minimum focus*
3
(m (feet))
1.2 (4.0)
Maximum magnification (×)
0.21
Minimum f-stop
f/32
Filter diameter (mm)
77
Dimensions (maximum diameter × height)
(mm (in.))
Approx. 87×196.5 (3 1/2×7 3/4)
Mass (g (oz.))
(excluding tripod-mounting collar)
Approx. 1,340 (47 1/4)
*
1
The value for the equivalent 35mm-format focal length is based on Interchangeable
Lens Digital Cameras equipped with an APS-C sized image sensor.
*
2
The value of angle of view 1 is based on 35mm-format cameras, and that of
angle of view 2 is based on Interchangeable Lens Digital Cameras equipped
with an APS-C sized image sensor.
*
3
Minimum focus is the distance from the image sensor to the subject.
This lens is equipped with a distance encoder. The distance encoder allows more
accurate measurement (ADI) by employing a flash for the process.
Depending on the lens mechanism, the focal length may change with any change
of the shooting distance. The focal length assumes the lens is focused at infinity.
Included items: Lens (1), Lens front cap (1), Lens rear cap (1), Lens hood (1),
Lens case (1), Set of printed documentation
Designs and specifications are subject to change without notice.
and is a trademark of Sony Corporation.
Company names and company product names are trademarks or registered
trademarks of those companies.
–2
English
You will find information on using each lens in this manual. Precautions
common to lenses, such as notes on use will be found in “Precautions
before using” on a separate sheet. Be sure to read both documents before
using the lens.
This manual is for use with several different lenses.
This lens is designed for A-mount, which can be used on Sony α cameras.
Notes on use
When using this lens with an E-mount camera, attach a separately sold Mount
Adaptor. Do not attach the lens directly to the E-mount camera or you may
damage both.
When you carry the camera with the lens attached, make sure to hold both the
camera and the lens steadily.
Precaution for flash use
When using a built-in camera flash, make sure to remove the lens hood.
With certain of lens/flash combinations, the lens may partially block the light
of the flash, resulting in a shadow at the bottom of the picture.
Vignetting
When you use lens, the corners of the screen become darker than the center.
To reduce this phenomena (called vignetting), close the aperture by 1 to 2
stops.
Names of parts
1···Lens hood index 2···Focusing ring 3···Zooming ring
4···Focal-length scale 5···Focal-length index 6···Collar mounting index (red)
7···Lens index (gray) 8···Collar index (gray) 9···Lens contacts 10···Collar
11···Distance index 12···Distance scale 13···Focus-mode switch
14···Lens mounting index 15···DMF-mode switch 16···Focus-range limiter
17···Collar-locking knob 18···Focus-hold button
Attaching/detaching the lens
To attach the lens (See illustration
.)
1
Remove the rear and front lens caps and the camera body cap.
You can attach/detach the lens front cap in two ways, (1) and (2). When
you attach/detach the lens cap with the lens hood attached, use method (2).
2
Align the orange index on the lens barrel with the orange index
on the camera (mounting index), then insert the lens into the
camera mount and rotate it clockwise until it locks.
Do not press the lens release button on the camera when mounting the lens.
Do not mount the lens at an angle.
To remove the lens (See illustration
.)
While pressing and holding the lens release button on the camera, rotate
the lens counterclockwise until it stops, then detach the lens.
Using the tripod
When using a tripod, attach it to the-mounting collar of the lens, not to the
tripod receptacle of the camera.
To change vertical/horizontal position
Loosen the collar-locking knob on the tripod-mounting collar (1) and rotate the
camera either direction. The camera can be quickly switched between vertical
and horizontal positions while maintaining stability when using a tripod.
Gray indexes (collar indexes) are located at 90° intervals on the tripod-mounting
collar. Align a gray index on the tripod-mounting collar with the gray index
(collar index) on the lens to adjust the camera position precisely (2).
Tighten the collar-locking knob firmly after the camera position is set.
To detach the tripod-mounting collar from the lens
The tripod-mounting collar can be detached from the lens when not using a
tripod.
1
Remove the lens from the camera.
See “
Attaching/detaching the lens” for details.
2
Loosen the collar-locking knob (1).
3
Rotate the tripod-mounting collar to align the red index on the tripod-
mounting collar (collar mounting index next to SET/RELEASE) with the
orange index on the lens (mounting index) (3).
4
Move the tripod-mounting collar towards the lens mount and
detach the tripod-mounting collar from the lens (4).
Attaching lens hood
It is recommended that you use a lens hood to reduce flare and ensure
maximum image quality.
Align the red line on the lens hood with the red line on the lens (Lens
hood index). Turn the lens hood clockwise until the red line on the
lens meets the red dot on the lens hood and it clicks into place (1).
The polarizing-filter window can be opened (2) to allow the rotation of the
polarizing filter (sold separately) without having to remove the lens hood. Close
the window when shooting.
Attach the lens hood properly. Otherwise, the lens hood may interfere with the
desired effect or may appear in pictures.
When storing, turn over the lens hood and place it onto the lens backwards.
Zooming
Rotate the zooming ring to the desired focal length.
(1) (2)
(3) (4)
(1) (2)
( )
AF( ) MF( )
AF( : ) MF(
: )
AF AF
MF MF
AF MF
(1)
MF
2
AF/MF
AF MF AF
AF/MF
MF AF MF AF
AF/MF
(DMF)
AF
MF
(DMF) DMF 2
DMF
DMF(STD.)
AF (AF-A) AF(AF-S)
DMF
DMF
AF(AF-C) AF-A
2
DMF(F TIME)
AF (AF-A/S/C)
DMF
MF
( )
MF
3
AF AF
AF
(AF )
AF
FULL : AF
-3m : 3.0m AF
70 105 200
35mm APS-C
( )
70-200mm F2.8 G
(SAL70200G)
35mm *
1
(mm) 105-300
16-19
1*
2
34 -12 30'
2*
2
23 -8
*
3
(m) 1.2
( ) 0.21
F32
(mm) 77
( )(mm) 87 196.5
(g)( ) 1,340
*
1
35mm APS-C
*
2
1 35mm 2 APS-C
*
3
ADI ADI
(1) (1)
(1) (1) (1)
4-271-843-04(1)
©2006 Sony Corporation
Printed in Japan
SAL70200G
70-200mm F2.8 G
/
Operating Instructions/Mode d'emploi/Manual de
instrucciones/
/
Interchangeable Lens/
Objectif interchangeable/
A-mount
(1) (2)
m
/Depth-of-field table (in meters)/Tableau de profondeur de champ (en
mètres)/Tabla de profundidad de campo (en metros)/
70 105 200
/Upper row: 70 mm, middle row: 105 mm, lower row: 200 mm/Ligne du haut : 70 mm, ligne du milieu :
105 mm, ligne du bas : 200 mm/Fila superior: 70 mm, fila del medio: 105 mm, fila inferior: 200 mm/
F2.8 F4 F5.6 F8 F11 F16 F22 F32
55.4-
117-
407-
39.2-
82.6-
288-
27.8-
58.4-
204-
19.7-
41.3-
144-
14.0-
29.3-
102-
9.89-
20.7-
72.1-
7.03-
14.7-
51.0-
5.00-
10.4-
36.1-
30m
19.6-64.4
24.0-40.1
28.0-32.4
17.1-123
22.1-46.7
27.2-33.4
14.6-
20.0-60.7
26.2-35.0
12.0-
17.5-105
24.9-37.7
9.64-
15.0-
23.3-42.1
7.54-
12.4-
21.3-50.7
5.78-
9.97-
19.1-71.0
4.35-
7.83-
16.6-164
15m
11.9-20.3
13.3-17.1
14.5-15.6
11.0-23.8
12.8-18.2
14.3-15.8
9.86-31.6
12.0-19.9
14.0-16.1
8.64-58.6
11.1-23.1
13.7-16.7
7.36-
10.0-29.8
13.2-17.5
6.09-
8.84-50.5
12.5-18.7
4.90-
7.56-
11.7-20.9
3.85-
6.28-
10.7-25.0
10m
8.54-12.1
9.25-10.9
9.77-10.2
8.06-13.2
8.97-11.3
9.69-10.3
7.46-15.2
8.61-11.9
9.56-10.5
6.75-19.5
8.14-13.0
9.39-10.7
5.96-32.3
7.56-14.8
9.16-11.0
5.11-482
6.87-18.5
8.86-11.5
4.26-
6.08-28.7
8.46-12.2
3.46-
5.24-130
7.95-13.5
7m
6.27-7.93
6.63-7.41
6.89-7.12
6.01-8.39
6.49-7.59
6.85-7.16
5.68-9.15
6.30-7.87
6.79-7.22
5.27-10.5
6.06-8.30
6.71-7.32
4.78-13.2
5.74-8.99
6.59-7.46
4.23-21.1
5.34-10.2
6.44-7.67
3.64-142
4.86-12.6
6.23-7.99
3.05-
4.32-18.9
5.96-8.49
5m
4.63-5.44
4.82-5.20
4.94-5.06
4.49-5.65
4.74-5.29
4.93-5.08
4.31-5.97
4.65-5.41
4.90-5.11
4.07-6.49
4.51-5.61
4.86-5.16
3.79-7.42
4.34-5.90
4.80-5.22
3.44-9.30
4.12-6.38
4.72-5.32
3.05-14.6
3.84-7.21
4.61-5.46
2.64-76.4
3.50-8.85
4.47-5.68
4m
3.76-4.27
3.89-4.12
3.96-4.04
3.67-4.39
3.84-4.18
3.95-4.05
3.56-4.58
3.78-4.25
3.94-4.07
3.40-4.87
3.69-4.37
3.91-4.09
3.20-5.36
3.58-4.54
3.87-4.14
2.96-6.24
3.43-4.81
3.82-4.19
2.68-8.17
3.24-5.25
3.76-4.28
2.36-14.6
3.00-6.04
3.66-4.41
3m
2.87-3.14
2.94-3.07
2.98-3.02
2.82-3.20
2.91-3.09
2.98-3.02
2.75-3.30
2.88-3.13
2.97-3.04
2.66-3.44
2.83-3.19
2.95-3.05
2.55-3.66
2.77-3.28
2.93-3.07
2.40-4.03
2.68-3.41
2.91-3.10
2.22-4.72
2.57-3.61
2.87-3.14
2.00-6.21
2.43-3.95
2.82-3.21
2.5m
2.41-2.59
2.46-2.54
2.49-2.51
2.38-2.63
2.44-2.56
2.48-2.52
2.33-2.69
2.42-2.59
2.48-2.52
2.27-2.78
2.39-2.63
2.47-2.53
2.19-2.92
2.34-2.68
2.46-2.55
2.08-3.14
2.28-2.76
2.44-2.57
1.95-3.52
2.21-2.89
2.41-2.59
1.79-4.26
2.10-3.09
2.38-2.63
2m
1.95-2.06
1.98-2.03
1.99-2.01
1.93-2.08
1.97-2.04
1.99-2.01
1.90-2.11
1.95-2.05
1.99-2.01
1.86-2.17
1.93-2.07
1.98-2.02
1.81-2.24
1.90-2.11
1.97-2.03
1.74-2.36
1.87-2.15
1.96-2.04
1.65-2.56
1.82-2.23
1.95-2.05
1.54-2.90
1.75-2.33
1.93-2.08
1.7m
1.66-1.74
1.68-1.72
1.69-1.71
1.65-1.75
1.68-1.72
1.69-1.71
1.63-1.78
1.67-1.74
1.69-1.71
1.60-1.81
1.65-1.75
1.69-1.71
1.57-1.86
1.64-1.77
1.68-1.72
1.52-1.94
1.61-1.80
1.68-1.73
1.45-2.06
1.57-1.85
1.67-1.74
1.37-2.26
1.53-1.92
1.65-1.75
1.5m
1.47-1.53
1.49-1.51
1.496-1.504
1.50-1.54
1.48-1.52
1.496-1.504
1.45-1.56
1.48-1.53
1.49-1.51
1.43-1.58
1.47-1.54
1.49-1.51
1.40-1.62
1.45-1.55
1.49-1.51
1.36-1.67
1.43-1.58
1.48-1.52
1.31-1.76
1.41-1.61
1.48-1.53
1.25-1.90
1.37-1.66
1.47-1.54
1.3m
1.28-1.32
1.29-1.31
1.297-1.303
1.27-1.33
1.29-1.31
1.297-1.303
1.26-1.34
1.28-1.32
1.296-1.304
1.25-1.36
1.28-1.34
1.29-1.31
1.23-1.38
1.27-1.34
1.29-1.31
1.20-1.42
1.25-1.35
1.29-1.31
1.17-1.47
1.23-1.37
1.28-1.32
1.12-1.56
1.21-1.41
1.28-1.32
1.2m
1.19-1.22
1.19-1.21
1.197-1.203
1.18-1.22
1.19-1.21
1.197-1.203
1.17-1.23
1.19-1.21
1.197-1.203
1.16-1.25
1.18-1.22
1.20-1.21
1.14-1.27
1.17-1.23
1.19-1.21
1.12-1.29
1.16-1.24
1.19-1.21
1.09-1.34
1.15-1.26
1.19-1.21
1.05-1.41
1.13-1.29
1.18-1.22
  • Page 1 1
  • Page 2 2

Sony SAL70200G ユーザーガイド

カテゴリー
カメラレンズ
タイプ
ユーザーガイド