HPi-50 Version 1.07 Supplementary Manual
Changing the Screen Display and Lesson
Grading Standard (Resolution)
You can change the minimum note value that is shown in the
screen and the standard by which Visual Lesson and Medal
Collection will be graded.
1. In the notation display screen, press the [ ] button to
access the Options screen (Owner's Manual p. 50).
2. Use the cursor [ ] [ ] buttons to select “Resolution .”
3. Use the cursor
[ ] [ ] buttons
to choose either
“32nd note” “16th
note.”
32nd note
This setting is ideal when viewing songs that include 32nd
notes.
The grading standard for Visual Lesson and Medal Collection
will also be 32nd notes. Since this setting requires you to
play with accurate timing, it allows advanced lessons.
16th note
This setting is ideal when viewing songs in which 16th notes
are the smallest note value.
The grading standard for Visual Lesson and Medal Collection
will also be 16th notes.
Recording Tempo Data
(Tempo Recording)
You can change the tempo of a song that you recorded or of an
internal song.
1. Select the song whose tempo you want to change
(Owner's Manual p. 31).
2. Hold down the [ ] (Rec) button and press the [Slow] or
[Fast] button.
The [ ] (Rec) button will light, the [ ] (Play/Stop) button
will ash, and the HPi-50 will be in the tempo record standby
condition.
If you decide to cancel recording, press the [
] (Rec) button once
again.
3. If desired, press the [Metronome] button to sound the
metronome.
4. Use the [Slow] [Fast] buttons to specify the starting
tempo.
5. Press the [ ] (Play/Stop) button.
Recording will start. In this case, recording starts immediately and
no count will be sounded.
6. As the song proceeds, use the [Slow] [Fast] buttons to
change the tempo.
7. Press the [ ] (Play/Stop) button.
Recording will stop, and a con rmation message will ask whether
you want to save the song whose tempo you changed.
8. Save or discard the data (Owner's Manual p. 38).
HPi-50
Copyright © 2013 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.
Saving your settings
The HPi-50’s settings will revert to the default
values when you turn o the power. You
can save them as described in “Storing Your
Settings (memory backup)” (Owner's Manual
p. 12).
* 5 1 0 0 0 3 6 9 6 7 - 0 1 *
-
1
-
2
