Whirlpool DFCX80116 Daily Reference Guide

カテゴリー
回転式乾燥機
タイプ
Daily Reference Guide
Health & Safety, Use & Care, Installation Guide and
Online Warranty Registration Information
產品安全指引、使用說明、安裝指南及
網上登記保養資料
Model 產品型號 : DFCX80116
2
繁體中文
3
11
3
EN
3
USER MANUAL
USER MANUAL 3
How to use the appliance
4-5
4
4
4
4
4
4-5
4
5
6
6
6
6
6
6
7
8
9-10
Control panel
Indicators
First time use
Daily use
Opening of the door during the cycle
Programs
Care label
Options
Care and Maintenance
Emptying the water tank after each cycle
Cleaning the door lter after each cycle
Cleaning the bottom lter when the relevant indicator turns on
Transport and Handling
Product Description
Troubleshooting
Installation Guide
Safety Instructions
INDEX
4
You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:
Visiting our website - docs.whirlpool.eu
Using QR Code
Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.
In order to receive a more complete assistance,
please register your product on
www.whirlpool.com.hk
EN
Quick guide
Before using the appliance carefully read the Safety Instructions.
xxxxxxxxxxxx
xxxx
Before using the appliance carefully read the Safety Instructions.
xxxxxxxxxxxx
xxxx
PROGRAMS
Eco cotton (kg Max*)
Mixed (kg 4)
This programme is ideal for drying cotton and synthetic fabrics
together.
Bed linen (kg Max*)
This programme is intended for drying cotton sheets.
Shirts (kg 3)
This is a programme for Shirts made from cotton or cotton
blend/synthetics.
Sport (kg 4)
For drying sports garments made of synthetics or cotton.
Duvet
Programme intended to dry bulky garments, such as single duvet.
Jeans (kg 3)
of robust For drying cotton jeans-wear and garments made
cotton, like denim, such as trousers and jackets.
Easy ironing
Refresh
A short programme suitable for refreshing bres and garments
by means of fresh air. Do not use with garments that are still wet.
It can be used on with any load size but is more eective with
small loads. The cycle duration is about 20 minutes.
FIRST TIME USE
Make sure that the water tank is correctly inserted. Make sure
that the drain hose on the back of the dryer is xed correctly,
either to the dryer’s water tank, or to your domestic sewage
system.
DAILY USE
Doing this will keep your machine working at its BEST!
Remember to empty your water tank after each drying cycle.
Remember to clean your lters after each drying cycle. (Refer
to section Care & Maintenance).
1.
Open the door and load garments. Always refer to instructions on
clothing labels and the max loads indicated in the Programs
section. Empty pockets. Make sure garments do not get caught
between the door and/or the door filter.
2. Close the door.
3.
4. Select the programme according to the laundry type.
5. Select the options, if necessary.
6. To start the cycle, press the Start/Pause button.
7. At the end of the drying cycle, a buzzer will beep. An indicator
on the control panel signals the end of the cycle. Pull the load
out immediately to prevent the formation of creases on laundry.
8. Turn the machine o by pressing the button On/O, open the
door and pull clothing out. If the machine is not switched o
manually, after about a quarter of an hour from the cycle end,
the appliance turns o automatically to save energy.
If this last stage is not carried out immediately, some machines
and/or some programmes/options are equipped with Crease Care
system. For some hours, after the end of drying, the drum rotates
at regular intervals to prevent the formation of creases. In case of
power failure, it is necessary to press the button Start/Pause to
restart the cycle.
OPENING OF THE DOOR DURING THE CYCLE
During operation, it is possible to open the door. After having
closed it, press the button Start/Pause again to restart the dryer.
*
MAX LOAD 8 Kg
(Dry
load)
CARE LABEL
Always check the care labels, especially when placing garments in
woleB .emit tsr if eht rof reyrd elbmut eht are the most commonly
used symbols:
May be tumble dried.
Tumble dry – low heat.
CONTROL PANEL
1 ON/OFF button (Reset if long pressed)
2 Program selection Knob
3 Start/Pause button
Options buttons
4 Dryness level
5 Start delay
6 Timed drying
7 Cycle end
8 Rapid (Key lock if long pressed)
9 Fresh care (Mute if long pressed)
INDICATORS
Cycle phase: Drying - Cool down - End of cycle.
Empty water tank -
Refer to Troubleshooting section: Failure: Call After-Sales Service
DEMO
Demo mode
3
2
7
8
4 5 6
3’’
1
3
2
9
7
8
4 5 6
3’’
3’’
h
h
4
Do not tumble dry.
Tumble dry – high heat.
^(2:16)
^Default Duration(H:Min)
^(1:40)
^(2:51)/ Rapid (2:41)
^(1:21)/ Rapid (1:11)
^(00:20)
Standard cotton programme, suitable to dry normally wet
cotton laundry. Most ecient programme in terms of energy
consumption for drying cotton laundry.
This cycle allows to extend the bres of garments thus
making ironing and folding easier. Do not use in case of
garments that are still wet. Suitable for small loads of cotton
textiles or cotton blends.
5
OPTIONS BUTTONS
These buttons serves to personalise the selected programme according to personal requirements.
Not all options are available for all programmes. Some options are incompatible with the ones
previously set. The buzzer and/or blinking indicators will signal the incompatibility. If the option is
available, the option indicator will stay on. Some options may be kept in the memory of the
programme if selected in the previous drying.
Rapid 30' (kg 0.5 )
Ideal for drying cotton garments spun at high speed in the
dryer.
Coloured (kg Max*)
Programme for gentle drying suitable for coloured
garments.
Silk (kg 0.5 )
Gentle drying of silk garments.
Wool kg 1
Programme for drying wool clothing. It is advisable to turn
the garments inside out before drying. Leave to dry naturally
the heaviest edges that are still damp.
Delicates kg 2
For drying delicate laundry which needs gentle treatment.
Synthetics kg 4
For drying laundry made of synthetic bres.
OPTIONS
After selecting the programme, the various options can be
set, if necessary.
Dryness level
Press the related button several times to obtain a dierent
level of residual moisture on garments. An indicator signals the
level being selected.
Iron dry: a very delicate ironing. Suitable for making ironing
of garments easier immediately after the end of the cycle.
Hanger dry: a level intended for delicate garments ready to
be hanged.
Cupboard dry: the garments are ready to be folded and put
away.
Extra dry: used for garments to be worn at the end of the
cycle.
Timed drying
This option allows to set the drying time. Press the corresponding
button to set the required time for drying. An indicator on the
control panel signals the time being selected.
Start delay
h
Rapid
Enables quicker drying.
Fresh care
Key lock
Mute
To activate the option, keep the button pressed until the
indicator goes on.
To disable the option, keep the button pressed until the indicator
goes o.
Cycle end
This option activates a prolonged buzzer at the end of the cycle.
Enable
it if you are not sure to hear the normal sound at the end
of the cycle. This option remains in memory if selected in the
previous drying.
If garments are left inside the drum after the end of the cycle,
they are subject to bacterial proliferation. This option allows to
prevent this proliferation by controlling the temperature and the
rotation of the drum. This treatment has a max. duration of 6
hours after the end of the programme set. This option remains in
memory if selected in the previous drying.
If this option is used together with the Start Delay, a crease
treatment (a periodic rotation of the drum) is added in the Start
Delay phase.
This option makes all machine controls inaccesible, except the
button On/O. When the machine is on: to activate the option,
keep the button pressed until the indicator goes on. To disable the
option, keep the button pressed until the indicator goes o. This
option remains in memory if selected in the previous drying.
This option turns o all sounds of control panel. Only warnings
remain active.
5
^Default Duration(H:Min)
^(00:30)
^(02:40)
^(01:35)
^(00:51)
^(00:50)
^(01:30)
The duration of these programs will depend on the size of the
load, types of textiles, the spin speed used in your washer
and any
extra options selected. In machines equipped
with display, the duration of the cycles is shown on the
control panel. The remaining time is constantly checked and
adjusted during the drying cycle to show the best possible
estimate.
This option allows you to set the delay of the cycle start. Press
the corresponding button several times to obtain the required
delay. After having reached the max. settable time, the option is
reset by pressing the button again. An indicator on the control
panel signals the time being selected. After having pressed the
button Start/Pause, the machine signals the remaining time
for the cycle start. In case of door opening, after closing, it is
necessary to press the button Start/Pause.
6
You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:
Visiting our website - docs.indesit.eu
Using QR Code
Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When
THANK YOU FOR BUYING A INDESIT PRODUCT.
In order to receive a more complete assistance,
please register your product on
www.indesit.eu/register
EN
Quick guide
Before using the appliance carefully read the Safety Instructions.
xxxxxxxxxxxx
xxxx
Before using the appliance carefully read the Safety Instructions.
xxxxxxxxxxxx
xxxx
Power consumption
0.50
left-on mode (Pl) - Watts 1.00
Programs Kg kWh Minutes
Eco Cotton *
8 4.76 130
Eco Cotton
4 2.47 70
Synthetics 4 1.83 90
*This is the reference programme for the energy label and suitable to
dry normal wet cotton laundry. This is the most ecient programme
in terms of energy consumption for drying wet cotton laundry.
(Standard/Default starting conguration)
TRANSPORT AND HANDLING
Never lift the dryer by holding it at the worktop.
1. Unplug the dryer.
2. Make sure that door and water tank are properly closed.
drain hose on the rear of the dryer again (see Installation Guide).
CARE AND MAINTENANCE
Unplug the dryer during the cleaning and maintenance
procedures.
Emptying the water tank after each cycle (see Fig. A).
Pull the container out of the dryer and and empty it into a
sink or other suitable drain, then place it back. Do not use the dryer
without having inserted the container back in place.
back in place. Do not use the dryer without having reinserted the
1. Open the door and pull upwards.
correctly.
turns on (see Fig. C).
1. Open t
he bottom door.
3.
Open the rear side of the lter and remove the lint from the
inner surface of the mesh.
water: this is normal).
5a. Approximately every 3 months, clean the condensing unit
5b. Lower the levers situated on the sides of the condenser.
After having removed the condenser, clean it under running
water.
5c. Place the condenser back in place and lift the levers.
checking it is perfectly integrated in place.
8. Make sure the air intake is free.
PRODUCT DESCRIPTION
1. Water Tank
2. Air Intake
3. and condenser
4.
BA
1
4
2
3
DC
3
The lters are essential parts for drying. They are intended
to collect the lint formed during drying process. In case of
clogged lters, the air ow inside the dryer would be
seriously aected: the drying times would be longer, the
energy consumption would increase and the dryer could be
damaged. If these procedures are not carried out properly,
the dryer may not start.
it under running water or by using a vacuum cleaner.
However, it is advisable to clean this lter after each cycle to
optimise drying performance. Do not use the dryer without having
inserted the lter in place rst.
Remove the bottom lter and the condenser as described below:
7
You can download the user manual by:
Visiting our website - www.whirlpool.com.hk
Alternatively, contact our After-Sales Service (See phone number in the warranty booklet). When
xxxxxxxxxxxx
xxxx
xxxxxxxxxxxx
xxxx
TROUBLESHOOTING
Before contacting the Service Centre, refer to the table below. Often the malfunctions are minor and can be solved in few minutes.
Malfunction Possible cause Solution
The tumble
dryer does not
turn on.
The plug is not inserted into the socket. Insert the plug into the socket.
The plug is faulty.
Try to plug another appliance in the same socket. Do not use
connecting electrical devices to the socket, as adapters or extensions.
A power failure occurred. Await the reactivation of the power supply.
The tumble
dryer does not
start.
The door is open. Close the door.
A time delay for the cycle start was set.
For machines equipped with this function: await the end of the delay
The button Start/Pause was not pressed to start
the program.
Press the button Start/Pause.
The function Key Lock was enabled (in case of
machines equipped with this option).
Refer to the Options section and, if the Key Lock is present, disable
it. Switching the machine off is not enough to disable this option.
The drying
times are very
long.
An appropriate maintenance was not carried
out.
Refer to the section Care & Maintenance and perform the operations
described.
The programme, the time and/or the drying
level set are not suitable for the type and the
amount of load inserted into the dryer.
Refer to the sections Programs and Options to find the programme
and the options most suitable for the type of load.
The garments are too wet.
Carry out a washing cycle with higher spin speed to remove as much
water as possible.
The dryer may be overloaded.
Refer to the Programs section to check the max. load for each
programme.
The programme
did not end.
A power failure might have occurred.
In case of power failure, it is necessary to press the button Start/Pause
to restart the cycle.
Water tank The water tank is full. Emtpy the water tank. Refer to the section Care & Maintenance.
and/or bottom
operation.
intake is free. Carrying out these operations improperly may cause
damages.
DEMO
The cycle lasts
few minutes.
The dryer is in DEMO mode. The DEMO
indicator is on.
Disable the DEMO mode. The following actions must be carried out
in sequence, without breaks. Switch the machine on and then
switch it off again. Press the Start/Pause button until the buzzer is
heard. Switch the machine on again. The “DEMO” indicator ashes
. ffo snrut neht dna
The presence
of wrench
symbol signals a
malfunction.
The machine sensors detected a failure.
Switch the dryer off and unplug it. Open the door immediately and
pull laundry out, to allow the heat to dissipate. Wait for about 15
minutes. Reconnect the dryer to the power supply, load the
laundry and restart the drying cycle. If the problem still occurs,
contact the After-Sales Service Centre and communicate the
.yalpsid eht no gnihsa lf stigid dna srettel
For instance: F3 and E2
8
1
2a
2b
4
5a
6
1
2
5b
..............
xxx V ~ xx Hz
xx
A
IPX4
xxxxxxxx
xxxx-xxxx W
33
5
EN
max 100 cm
39 inch
15 mm
15 mm
10 mm
min 1.5 cm - max 2 cm
min 0.59 inch - max 0.79 inch
Quick guide
INSTALLATION GUIDE
9
IMPORTANT TO BE READ AND OBSERVED
PERMITTED USE
Do not dry unwashed items in the tumble dryer.
Take care that no lint or dust has accumulated around
the dryer.
Do not overdry the laundry.
INSTALLATION
6
SAFETY INSTRUCTIONS
This symbol reminds you to read this instruction manual.
Before using the appliance, read these safety instructions.
Keep them nearby for future reference. These instructions and
the appliance itself provide important safety warnings, to be
observed at all times. The manufacturer declines any liability
for failure to observe these safety instructions, for inappropriate
use of the appliance or incorrect setting of controls.
Children from 8 years old and above and persons with
reduced physical, sensory or mental capabilities or lack of
experience and knowledge can use this appliance only if they
are supervised or have been given instructions on safe use
and understand the hazards involved. Children must not play
with the appliance. Cleaning and user maintenance must not
be carried out by children without supervision.
Very young children (0-3 years) should be kept away from
the appliance. Young children (3-8 years) should be kept
away from the appliance unless continuously supervised.
Fabric softeners, or similar products, should be used as
specied by the fabric softener instructions.
The appliance must be handled and installed by two or more
persons - risk of injury. Use protective gloves to unpack and
install - risk of cuts.
If you want to stack the dryer on a washing machine, rst
contact our After-Sales Service or your specialist dealer to verify
the complete list of suitable models. The stacking is only possible
if the dryer is attached to the washing machine by means of the
appropriate stacking kit available through our After-Sales Service
or your specialist dealer. Instructions for the correct assembly are
supplied with the stacking kit.
The appliance must not be installed behind a lockable door, a
sliding door or a door with a hinge on the opposite side to that of
the tumble dryer, in such a way that a full opening of the tumble
dryer door is restricted.
If the dryer is installed near to a gas or coal stove, provide a
heat insulating plate (85 cm x 57 cm) in between, as the side
facing the stove is covered with aluminium foil.
Exhaust air must not be discharged into a ue which is used
for discharging fumes from appliances burning gas or other fuels.
The appliance shall be placed against the wall to limit access
to its rear side.
Take care not to use a carpet which obstructs ventilation
openings in the base of the dryer.
If the dryer is installed under a worktop, provide a distance of 10
mm between the upper panel of the dryer and any objects above
it, and 15 mm between the sides of the appliance and the walls or
furniture units adjacent to it.
This appliance is not for professional use. Do not use the
appliance outdoors.
WARNING: Never stop a tumble dryer before the end of
the drying cycle unless all items are quickly removed and
spread out so that the heat is dissipated.
Oil-soaked items should not be dried in the tumble dryer
due to their high ammability.
Do not load the machine above the maximum capacity
(kg of dry cloth) indicated in the programme table.
CAUTION: The appliance is not intended to be operated
by means of an external switching device, such as a timer, or
separate remote controlled system.
This appliance is intended to be used in household and
similar applications such as: sta kitchen areas in shops,
oces and other working environments; farm houses; by
clients in hotels, motels, bed & breakfast and other residential
environments.
Never open the door forcibly or use it as a step.
Items that have been soiled with substances such as
cooking oil, acetone, alcohol, petrol, kerosene, spot removers,
turpentine, waxes and wax removers should be washed in hot
water with an extra amount of detergent before being dried in
the tumble dryer. Items such as foam rubber (latex foam),
shower caps, waterproof textiles, rubber-backed articles and
clothes or pillows tted with foam rubber pads should not be
dried in the tumble dryer. Remove all objects from pockets,
such as lighters and matches. Do not use the tumble dryer if
industrial chemicals have been used to clean it.
Installation, including water supply (if any), electrical
connections and repairs must be carried out by a qualied
technician. Do not repair or replace any part of the appliance
unless specically stated in the user manual.
Keep children away from the installation site. After unpacking the
appliance, make sure that it has not been damaged during
transport. In the event of problems, contact the dealer or your
nearest After-Sales Service. Once installed, packaging waste
(plastic, styrofoam parts etc.) must be stored out of reach of
children-risk of suocation. The appliance must be disconnected
from the power supply before any installation operation-risk of
electric shock. During installation, make sure the appliance does
not damage the power cable-risk of re or electric shock. Only
activate the appliance when the installation has been completed.
Install the dryer in rooms with adequate ventilation (open
door, ventilation grid or slot larger than 500cm² ) in order to
avoid the backow of gases into the room from appliances
burning other fuels, including open res.
10
The symbol on the product or on the accompanying
documentation indicates that it should not be treated as
domestic waste but must be taken to an appropriate collection
center for the recycling of electrical and electronic equipment.
The packaging material is 100% recyclable and is marked with the
recycle symbol.
ELECTRICAL WARNINGS
7
EN
Quick guide
It must be possible to disconnect the appliance from the
power supply by unplugging it if plug is accessible, or by a multi-pole
switch installed upstream of the socket in accordance with the
wiring rules and the appliance must be earthed in conformity
with national electrical safety standards.
Do not use extension leads, multiple sockets or adapters. The
electrical components must not be accessible to the user after
installation. Do not use the appliance when you are wet or
barefoot. Do not operate this appliance if it has a damaged power
cable or plug, if it is not working properly, or if it has been
damaged or dropped.
If the supply cord is damaged, it must be replaced with an
identical one by the manufacturer, its service agent or similarly
qualied persons in order to avoid a hazard - risk of electric shock.
Make sure that all lint traps are cleaned before starting any
drying cycle.
The various parts of the packaging must therefore be disposed of
responsibly and in full compliance with local authority regula-
tions governing waste disposal.
This appliance is manufactured with recyclable or reusable
materials. Dispose of it in accordance with local waste disposal
regulations.
For further information on the treatment, recovery and recycling
of household electrical appliances, contact your local authority,
the collection service for household waste or the store where you
purchased the appliance. This appliance is marked in compliance
with European Directive 2012/19/EU, Waste Electrical and
Electronic Equipment (WEEE). By ensuring this product is
disposed of correctly, you will help prevent negative conse-
quences for the environment and human health.
WARNING: Ensure that the appliance is switched o and
disconnected from the power supply before performing any
maintenance operation; never use steam cleaning equipment -
risk of electric shock.
DISPOSAL OF PACKAGING MATERIALS
CLEANING AND MAINTENANCE
DISPOSAL OF HOUSEHOLD APPLIANCES
11
CH
使用說明書
感謝您購買惠而浦產品
為了獲得更完善的服務,
請於www.whirlpool.com.hk註冊您的產品
索引
使用說明書 11
如何使用乾衣機
12-13
控制面板 12
顯示屏指示燈 12
首次使用 12
日常使用 12
當程序運行時打開機門 12
程序
12-13
乾衣衣物護理標籤 12
選項 13
清潔和保養
14
在每個程序完成後,清空儲水箱 14
在每個程序完成後,清潔機門過濾器 14
當相關指示燈亮起時,清潔底部過濾器 14
搬運和處理
14
產品描述
14
故障排除
15
安裝指引
16
安全指引
17-18
12
清空儲水盒清洗機門過濾器清洗底部過濾器
請參考故障排除
篇章 - 故障指示:聯絡服務中心 示範模式
感謝您購買惠而浦產品,為了
獲得更完善的服務,請於
www.whirlpool.com.hk
註冊您的產品。
使用此產品前,請細心參閱「產品安全指引、使用說明及安裝指南」
1. 電源「開/關」鍵 (重設請長按)
2. 程序選擇旋鈕
3. 「啟動/暫停」鍵
功能鍵
4. 「乾衣程度」
5. 「預校開機時間」
6. 「乾衣時間」
7.
程序結束蜂鳴
8. 快速 (兒童安全鎖請長按)
9. 清爽抗皺 (靜音模式請長按)
乾衣階段指示:
請確保儲水盒安插正確。檢查排水軟管與儲水盒。請確保乾衣
機後部的排水軟管被正確固定到乾衣機的儲水盒,或您日常的
污水處理系統中。
1.
打開機門,放入衣物。請查閱程序篇章所指出的最大建
議乾衣量。清空衣物口袋,確保衣物沒有被卡住於機門玻璃
和機門過濾器之間。
2. 關閉機門。
3. 按下電源「開/關」鍵。
4. 設定所需的程序。
5. 選擇選項 (如有需要)。
6. 如需啟動程序,按「啟動/暫停」鍵。
7. 乾衣程序結束後,會響起「咇」聲。控制面板上的指示燈
亮起,表示程序已經完結。此時應立即將衣服取出以防摺
痕形成。
8. 按下電源「開/關」鍵,以關閉乾衣機,打開門並將衣服取
出。如果乾衣機未有手動關機,則在程序結束約15分鐘後,
乾衣機會自動關閉,以節省能源。
對於某些配備抗皺護理功能的型號,系統會在完成程序的幾
個小時,滾筒以規則的間隔旋轉,防止摺痕形成。如果出現
電源故障,必須按下「啟動/暫停」鍵,重新啟動程序。
下列步驟可使你的乾衣機達至最佳表現效能。
每個乾衣程序完成後,謹記清空水槽,以及清潔過濾網。
(請參閱「清潔和保養」篇章。)
棉質節能(*最高負載量(公斤)) ^(2:16)
標準棉質程序,適用於烘乾一般濕的棉質衣物。這是烘乾
棉質衣物能源效益最佳的程序。
混合衣物(4公斤) ^(1:40)
適用於烘乾由棉人造纖維及其混合織物製成的衣物。
床單(*最高負載量(公斤)) ^(2:51)/快速模式(2:41)
此程序專為烘乾棉質床單而設。
襯衣(3公斤) ^(1:21)/快速模式(1:11)
適用於由棉質合成纖維及混合纖維製成的襯衫
運動衣物(4公斤)
適用於烘乾合成纖維或棉質製成的運動服裝。
大型物件
適用於烘乾如睡袋,可拆洗棉被。
牛仔布(3公斤)
適用於烘乾類似牛仔布堅固物料製成的棉質牛仔裝或衣
物,如長褲、外套、深色牛仔服裝。
易熨防皺
此程序可放鬆衣物纖維,令熨燙及摺疊衣服變得更容易。
當衣服濕透時,不要使用此程序。此程序適用於較輕負載
量的棉質布料或棉質混紡上。
清新 ^(00:20)
程序需時較短,可令衣物布料帶來清爽效果。不
仍然濕的衣服。它可以用於任何負載量的衣物,但在較少
負載量時效果會更好。程序持續時間大約為20分鐘。
^ 預設程序時間
(小時:分鐘)
可以烘乾
不可烘乾
適合高溫烘乾
適合低溫烘乾
乾衣衣物護理標籤
經常檢查護理標籤,尤其當你第一次使用乾衣機時。下列為常
用圖標:
* 最大乾衣量8公斤
當程序運行時,您仍可打開乾衣機機門。當門被關上,按下「
啟動/暫停」鍵,程序將重新啟動。
乾衣 - 冷卻 程序結束
控制面板
顯示屏指示燈
首次使用
日常使用
當程序運行時打開機門
程序
DEMO
13
CH
程序
的時間長短受負載量、布料類型、洗衣時所用轉速以
及所揀選的選項影響。程序所需時間會顯示於備有顯示屏
幕的乾衣機的控制面板上。於烘乾程序進行中,系統會經
常監察並調整程序剩餘時間,以達至最佳效果。
選項鍵
這些選項可根據個人要求而揀選。並非所有選項都適用於所
有程序。某些選項與先前設置的選項並不兼容。蜂鳴器和/
或閃爍指示燈將指示所選的程序及選項的不兼容性。
果該選項可使用,則選項指示燈將保持亮起的狀態。如
果在先前的乾衣程序中已選擇,系統將預設啟用某些選項。
30分鐘速乾(0.5公斤) ^(00:30)
用於快速烘乾棉質布料。
顏色衣物(*最高負載量(公斤)) ^(02:40)
用於烘乾需要溫和處理的顏色衣物。
絲質(0.5公斤) ^(01:35)
用於烘乾需要溫和處理的纖細絲質衣物。
羊毛(1公斤) ^(00:51)
羊毛衣物的乾衣程序。建議在乾衣前將衣物翻出來。
對於仍然潮濕的邊緣位置,請於完成程序後掛起風乾。
纖細衣物(2公斤) ^(00:50)
用於烘乾需要溫和處理的精緻衣物。
合成纖維(4公斤) ^(01:30)
用於烘乾由合成纖維製成的衣物。
^預設程序時間(小時:分鐘)
選擇程序後,如有需要,可以設定各種不同的選項。
選項
乾衣程度
按下相關的按鈕數次,以調校不同的乾衣程度,指示燈會
亮起,以表示正在選擇的程度級別。
熨燙
乾衣:柔和的乾衣方法。於程序完結後,立即熨燙衣
物會變得更容易。
防皺乾衣:適用於準備懸掛,而且較纖細的衣物。
一般乾衣:適用於在乾衣程序結束後摺疊放入衣櫥的衣物。
額外乾衣:適用於在乾衣程序結束後,立即穿著的衣物。
乾衣時間
此選項允許設定特定乾衣時間。按下相應按鈕設定乾衣時
間,控制面板上所屬時間的指示燈會相應地亮起。
預校開機時間
此功能可讓您設定延遲程序的開始時間。按下相應的按鈕
數下,以選取所需的延遲時間。當到達時間最大值,再次
按下按鈕可重設選項。
控制面板上的指示燈表示正在選擇的時間。按下「開始/暫
停」鍵後,乾衣機會發出程序開始的剩餘時間信號。若此
時機門打開,於關閉後,必須再次按下「開始/暫停」鍵。
快速
加快乾衣的速度。
清爽抗皺
如果衣物在程序結束後仍留在滾筒內,細菌會於衣物上繁
殖。該選項允許通過控制滾筒的溫度和旋轉,來防止細菌擴
散。此功能最多可於乾衣程序結束後持續6小時。若於先前
的乾衣程序中已有選擇此選項,系統將預設啟用此選項。
如果此選項與「預校開機時間」一起使用,則會在「預校
開機時間」階段添加皺摺處理(滾筒的周期性旋轉)功能。
兒童安全鎖
除電源「開/關」鍵外,此選項使所有按鈕被鎖定。乾衣
機開啟時:要啟動此選項,請按住此按鈕直至指示燈亮
起。要停止此選項,請按住按鈕直到指示燈熄滅。若於
先前的乾衣程序中已有選擇此選項,系統將預設啟用此
選項。
靜音模式
此選項可關閉控制面板的所有聲音。只有警告提示仍然可
啟動。
如需啟動此功能,請按住按鈕直到指示燈亮起。
如需關閉此功能,請按住按鈕直到指示燈熄滅。
程序結束蜂鳴
此選項可在程序結束時,啟動延長蜂鳴器的功能。如果您
不確定在程序結束時聽到正常程序完結的聲音,請啟動
它。如果在先前的乾衣程序中已選擇,系統將預設啟用此
選項。
14
搬運和處理
搬運時,切勿提拉乾衣機的頂板。
1. 拔除乾衣機電源插頭。
2. 檢查並確定機門和儲水盒都已正確關閉。
3. 如果排水軟管連接到污水系統,請再次將排水軟管固定在乾
衣機背部(請參閱「安裝指引」篇章)。
能源耗用
關閉模式功率消耗 (Po)-瓦特 0.50
備用模式功率消耗 (Pl) - 瓦特 1.00
程序 公斤 千瓦/小時 分鐘
棉質節能
*
8 4.76 130
棉質節能 4 2.47 70
合成纖維 4 1.83 90
*
這是能標籤的參考程序,適用於烘乾普通濕棉質衣物。
是就能消耗而言,烘乾濕的棉質衣物最有效的程序。(
準/預設啟動配置)
過濾器是乾衣機的必要部件。它們用於收集乾衣過程中形成的
棉絨。如果過濾器堵塞,乾衣機內的氣流將受到嚴重影響:乾
衣時間會更長,能耗會增加,乾衣機可能會損壞。如果這些步
驟沒有正確執行,乾衣機可能無法啟動。
清潔和保養
在進行清潔和維修過程中,請先拔除乾衣機電源插頭。
產品描述
1. 儲水箱
2. 進氣口
3. 底部過濾網及冷凝器
4. 機門過濾器
在每個程序完成後,清空儲水箱(請參看圖A)。
將儲水箱從乾衣機中拉出,然後將水倒入水槽或其他合適的
排水箱中,然後將儲水箱放回原位。若未能將儲水箱放回原
位,請勿使用乾衣機。
在每個程序完成後,清潔機門過濾器(請參看圖B)。
將過濾器拉出並通過在水流下或使用真空吸塵器從過濾器表
面上除去棉絨來清潔過濾器。為獲得最佳效果,請先將所有
過濾器弄乾,然後再將其安置回原位。如果沒有將過濾器放
回正確位置,請勿使用乾衣機。
如下所述拆下機門內的過濾器:
1. 打開機門並將過濾器向上拉。
2. 打開過濾器,清除所有部件上的棉絨,並正確地放回它
請確保過濾器放回原位時與乾衣機邊緣密封。
當相關指示燈亮起時,清潔底部過濾器(參見圖C)。
將底部過濾器拉出,並在水流下或使用真空吸塵器清潔過濾
器上的棉絨。
建議在每個程序後清潔此過濾器,以優化乾衣性能。
如果沒有先將過濾器放回原位,請勿使用乾衣機。
如下所述卸下底部過濾器和冷凝器:
1.
打開
2. 拿起手柄,將底部過濾器拉出。
3. 打開過濾器的後側,從過濾網的內表面上除去棉絨。
4. 清潔底部過濾室 (可能有殘留水,這是正常的)。
5a. 大約每3個月清潔位於底部過濾器後面的冷凝裝置(圖D)。
5b. 降低位於冷凝器側面的槓桿。取下冷凝器後,在水流下
清洗。
5c. 將冷凝器放回原位並抬起桿。
6. 關閉底部過濾器的後側,然後檢查它是否準確到位。
7. 放下過濾器手柄並關閉底門。
8. 確保進氣口是流通的。
You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:
Visiting our website - docs.indesit.eu
Using QR Code
Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When
THANK YOU FOR BUYING A INDESIT PRODUCT.
In order to receive a more complete assistance,
please register your product on
www.indesit.eu/register
EN
Quick guide
Before using the appliance carefully read the Safety Instructions.
xxxxxxxxxxxx
xxxx
Before using the appliance carefully read the Safety Instructions.
xxxxxxxxxxxx
xxxx
Power consumption
0.50
left-on mode (Pl) - Watts 1.00
Programs Kg kWh Minutes
Eco Cotton *
8 4.76 130
Eco Cotton
4 2.47 70
Synthetics 4 1.83 90
*This is the reference programme for the energy label and suitable to
dry normal wet cotton laundry. This is the most ecient programme
in terms of energy consumption for drying wet cotton laundry.
(Standard/Default starting conguration)
TRANSPORT AND HANDLING
Never lift the dryer by holding it at the worktop.
1. Unplug the dryer.
2. Make sure that door and water tank are properly closed.
drain hose on the rear of the dryer again (see Installation Guide).
CARE AND MAINTENANCE
Unplug the dryer during the cleaning and maintenance
procedures.
Emptying the water tank after each cycle (see Fig. A).
Pull the container out of the dryer and and empty it into a
sink or other suitable drain, then place it back. Do not use the dryer
without having inserted the container back in place.
back in place. Do not use the dryer without having reinserted the
1. Open the door and pull upwards.
correctly.
turns on (see Fig. C).
it under runing water or by using a vacuum cleaner.
1. Open the bottom door.
3.
Open the rear side of the lter and remove the lint from the
inner surface of the mesh.
water: this is normal).
5a. Approximately every 3 months, clean the condensing unit
5b. Lower the levers situated on the sides of the condenser.
After having removed the condenser, clean it under running
water.
5c. Place the condenser back in place and lift the levers.
checking it is perfectly integrated in place.
8. Make sure the air intake is free.
PRODUCT DESCRIPTION
1. Water Tank
2. Air Intake
3. and condenser
4.
BA
1
4
2
3
DC
3
The lters are essential parts for drying. They are intended
to collect the lint formed during drying process. In case of
clogged lters, the air ow inside the dryer would be
seriously aected: the drying times would be longer, the
energy consumption would increase and the dryer could be
damaged. If these procedures are not carried out properly,
the dryer may not start.
However, it is advisable to clean this lter after each cycle to
optimise drying performance. Do not use the dryer without having
inserted the lter in place rst.
Remove the bottom lter and the condenser as described below:
15
CH
故障排除
聯絡售後服務中心之前,建議先自行進行檢查,看問題是否可以使用以下列表的簡易方法解決。通常故障是輕微的,可以在數分
鐘內解決。
* 備注:某些配備自動清洗功能的型號不備有過濾器於產品底部。更多詳情請參閱「清潔和保養」篇章。
可從下列途徑下載本說明書:
於網站內可下載 - www.whirlpool.com.hk
致電售後服務中心(請參閱保養書上的電話號碼),提供乾衣機門內側顯示的代碼。
乾衣機無法
啟動
乾衣程序無法
啟動
乾衣時間太長
儲水箱
機門過濾器或
底部過濾網 *
底部過濾網 *
示範模式
程序維持數分鐘
乾衣程序一直未結束
xxxxxxxxxxxx
xxxx
xxxxxxxxxxxx
xxxx
問題 可能原因 解決方法
插頭沒有正確插在插座內。 將插頭正確插在插座內。
插頭故障。 嘗試將另一台機器重新連接同一插座。請勿使用連接器或萬能插頭
連接機器至插座。
電源故障。 等待重新啟動電源。
機門未正確關閉。 將機門關閉上。
已設定預校開機時間。
對於配備此功能的乾衣機:等待「預校開機時間」裝置結束或關閉
乾衣機,以重置它。請參閱「選項」篇章。
沒有按下「啟動/暫停」鍵。 按下「啟動/暫停」鍵,再次啟動乾衣機。
啟用了功能鍵鎖 (如果配備了 請參閱「選項」篇章,如果正在啟動兒童安全鎖,請停止使用。
此選項的乾衣機)。 關閉乾衣機並不能停用此選項。
沒有進行適當的清潔和保養。 請參考「清潔和保養」篇章,並執行所述操作。
程序、時間和/或乾衣程度設定不適合
放入乾衣機的負載類型和數量。
請參閱「程序選項」篇章,以查找最合適負載類型的程序和
選項。
衣物太濕。
以更
高的旋轉速度進行衣程序,可以盡可能多地去除多餘水份。
乾衣機負載量太多。 請參閱「程序」篇章,以檢查每個程序上可加載的最大負載量。
可能發生了電源故障。 如果出現電源故障,必須按下「啟動/暫停」鍵,再重新啟動程序。
提示燈亮起或閃爍
儲水箱太滿。 清空儲水箱。請參考「清潔和保養」篇章。
乾衣機運行所需的空氣流動失效。
清潔機門過濾器或底部過濾網及檢查空氣流動是否順暢。不正確地
進行這些操作可能會對乾衣機/衣物造成損害。
要清潔底部過濾網。 清潔底部過濾網。請參考「清潔和保養」篇章。
乾衣機正處於示範模式,示範模式
暫停使用示範模式,必須按順序執行以下操作,不得中斷,啟動乾
指示燈正亮起。
衣機,然後關閉它,按下「啟動/暫停」鍵,直到聽到蜂鳴聲,再次
啟動乾衣機。「示範模式」指示燈閃爍,然後熄滅。
關閉乾衣機並拔下電源插頭。立即打開機門,將衣物取出,讓熱量
消散。
乾衣機的感應器檢測到故障。 等待大約15分鐘。將乾衣機重新連接到電源,放入衣物並重新開始
乾衣。如果問題仍然存在,請聯繫售後服務中心並向我們說明顯示
屏上閃爍的字母和數字。例如:F3和E2。
顯示屏上出現故障
16
1
2a
2b
4
5a
6
1
2
5b
..............
xxx V ~ xx Hz
xx
A
IPX4
xxxxxxxx
xxxx-xxxx W
33
16
CH
安裝指引
最多100厘米
39英吋
最少1.5 厘米 - 最多2厘米
最少0.59英吋 - 最多0.79英吋
15 毫米 15 毫米
17
CH
若使用衣物柔軟劑或同類產品應根據產品說明書的規定使
用。
此乾衣機不適用於專業用途,請勿於室外使用此乾衣機。
不要過度烘乾衣服。
安裝
此乾衣機建議由兩個或更多的人進行安裝處理,避免受傷
風險。使用防護手套來執行所有拆封和安裝操作,避免割傷風
險。
安裝,包括供水(如有),及任何電線接駁,必須由合資格的
技術人員按照製造商的說明和本地標準安全法規進行維修。除
非在用戶手冊特別聲明,切勿維修或更換任何乾衣機的部件。
兒童應遠離乾衣機安裝地點。卸下包裝後,確認它沒有在運輸
過程中損壞。在出現問題時,請聯絡經銷商或售後服務中心。
當完成安裝後,包裝材料(如塑膠,發泡膠件等)應置於幼童無法
取得的地方,避免意外的風險。此乾衣機進行安裝前,必先斷
開它的電源連接避免觸電危險。進行安裝時,確保乾衣機電源
線沒有損壞,避免火災或觸電危險。只有當安裝步驟完成後才
可啟動乾衣機。
請確保空氣流通(將門、大於500厘米平方的通風格或通風槽
打開),避免乾衣機排氣回流至室內,引致燃燒其他燃料,包括
明火。
如果乾衣機安裝至廚櫃底,請由乾衣機頂部至廚櫃之間預留10
毫米空間,而乾衣機兩旁的側面板與廚櫃壁之間,亦需預留15
毫米空間。
如果乾衣機被安裝於煤氣爐或煤炭爐旁邊,請於乾衣機與煤
氣爐或煤炭爐中間,安裝隔熱板 (85 厘米 x 57 厘米),而面向煤
氣爐或煤炭爐一方的乾衣機面板,需要以鋁箔覆蓋。
切勿將乾衣機連接至用來排放燃燒氣體或其他燃料的排氣管
道。
不得將此乾衣機安裝於下述類型的門的後方:包括帶鎖門、
滑動門或當門鉸與乾衣機機門方向相反時,因為這些情況下會
令乾衣機機門不能完全打開。
乾衣機必須靠牆擺放,以確保機件背部不會被觸碰。
請勿使地毯堵塞乾衣機底部排氣孔。
如果要在洗衣機頂部放置乾衣機,請首先聯繫我們的售後服
務中心或您的經銷商,以取得可行型號的列表。只允許使用我
們的售後服務中心或您的經銷商提供的專業疊裝工具將乾衣機
固定在洗衣機上。固定架套件中附有組裝及使用說明。
安全指引
重要事項:請閱讀並遵循
此符號提示你於使用乾衣機前請先細閱產品安全指引。請妥
善保存此產品安全指引及使用說明作將來參考。本手冊和乾衣機
本身提供重要的安全警告,請按需要隨時讀取及查察。不當的使
用及不當的操作可能會導致的風險,製造商將不負任何責任。
除非得到持續監視,否則幼兒(0-3歲)和兒童(3-8歲)應遠離
乾衣機。乾衣機可由8歲以上之兒童及身體,感官或精神障礙或
經驗知識不足的人士操作,前提是此等人士已接受乾衣機的安全
指導及指引,且瞭解使用乾衣機的相關危險。
兒童不可胡亂玩弄乾衣機。未經指導,兒童不可進行乾衣機的清
潔及保養工作。
警告:烘乾程序結束前切勿停止乾衣機運作,除非所有烘乾
物件均可快速取出且鋪開散熱。
衣物如沾有食用油、丙酮、酒精、汽油、煤油、松脂、去污
劑、蠟及除蠟劑,在用乾衣機烘乾前請用熱水與大量洗滌劑清
洗。泡沫橡膠(乳膠發泡體)、塑膠浴帽、防水紡織品、帶橡膠配
件的物品與衣物或裝有泡沫橡膠墊的枕頭等物品不得使用本乾衣
機烘乾。
請取出衣物口袋中的所有物品,例如打火機和火柴。若曾經使用
化學劑清潔衣物,請不要使用乾衣機烘乾。
經過油浸的衣物具有高度易燃性,不可放於乾衣機內烘乾。
切勿強行打開機門或以它作為踏板使用。
允許使用
注意:此乾衣機不能透過外部控制器或遙控裝置進行操作。
此乾衣機設計只適用於家居或下列之類似環境:如一般商
店、辦公室及其他工作環境的職員專用廚房;農莊;供入住酒
店、汽車旅館及其他住宅式旅店之顧客使用;提供簡單住宿及早
餐服務之旅舍。
請確保負載不超過最大乾衣量 (請參閱「程序」篇章中的指示)。
請勿使用乾衣機烘乾未
清洗衣物。
請留意有沒有棉絨或塵埃堆積在乾衣機周圍。
18
電氣警告
插座必須能夠拔掉,以切斷電源,或安裝設有開關鍵的插座
及按照本地的電器安全標準法連接地線。
請勿使用接駁電線或萬能插頭,安裝後電線部份不可被使用
者易於接觸。手濕或赤腳時請勿使用本產品。若本產品的電源線
或插頭有損壞,不能正常運作,或受損,請勿操作。
如果電源線損壞,必須根據相同產品更換電源線。電源線只
能由製造商指定的技術人員更換以避免觸電的危險。
清潔和保養
注意:執行任何維修或清潔操作之前,請先關閉及拔下電源
插頭。切勿使用蒸氣清洗本產品。
必須確保已經清潔所有棉絨才開始乾衣程序。
處理包裝物料
包裝材料完全可回收,並設有可回收標誌
包裝的各個部分必須根據當前本地廢品處理法規進行處理。
廢棄家用電器
必須根據當前本地廢品處理法規進行處理。有關處理、修復和回
收本產品的詳細資訊,請聯繫售後服務中心、家庭廢品處理服務
中心或您購買本產品的商店。
本乾衣機依照有關廢棄電器和電子設備(WEEE)的歐盟標準
2012/19/EU標示。確保以正確的方式廢棄本產品,可避免因不
當的廢棄處理方式而對環境和人體健康造成潛在的負面影響。
這符號 表示此機器不能作為家庭廢品處理。應將它交給回收
電器和電子設備的適用收集點。
19
CH
網上登記新產品保養
「惠」環保出力,減少用紙!於網上登記產品更可獲額外多一個月保養。
Register your product online
Save the planet and register your product warranty online!
Enjoy extra 1-month free warranty upon online registration.
https://rebrand.ly/WPwarranty
20
05/2021
W11547861
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Whirlpool DFCX80116 Daily Reference Guide

カテゴリー
回転式乾燥機
タイプ
Daily Reference Guide

他の言語で