POA
POA
-
-
FBOX130
FBOX130
The cleaning time of the filter is postponed to
5.5 times by installing optional external filter
“POA-FBOX130”.
* POA-FBOX130 includes 1 of the POA-FIL130.
ORDER REPLACEMENT FILTER
When the filter became old or it damages, filter can be ordered through your
dealer.
When ordering a filter, give the following Type No. to the dealer.
Installation procedure
Before Installation
3. Insert 2 hook parts of the plate into the hole of intake vents of the cabinet, and
fix with a included screw (M4x16).
4. A filter base is attached in a plate.
Insert the 2 hook parts(B) of the side of a filter base into the
slots on the plate and Insert the 3 hook parts(C) of the lower
of a filter base into the slots on the plate.
5. Push the filter base downward until it is locked.
Option Filter kit
Filter Removal
Type No. POA-FBOX-130
This filter is an option filter kit for preventing a projector from external dust. By
attaching this filter, a projector can be more powerfully prevented from external
dust. Moreover, filter maintenance can be performed easily. It attached in this kit
with the Filter unit, the Screw(M4x16), and the Installation manual.
Filter care and cleaning
Replacement Filter Type No. : POA-FIL-130
Clean the filter with brush or vacuum cleaner.
Caution:
Do not wash. It may result, a filter net damages.
Insert 2 hook parts of the plate in the air intake
vents of the cabinet
SCREW
SCREW(M4x16)
AIR INTAKE VENTS
C
B
- 1 -
- 3 -
- 2 - - 4 -
Push and fix.
D
FILTER-A
FILTER-A
FILTER-B
SCREW(M4x16)
FILTER UNIT
FILTER BASE
FILTER BASE
PLATE
PLATE
INSTALLATION
MANUAL
1. Disassemble the Filter unit into two parts, a plate and a filter base.
Pull part(A) to the front side and pull the Filter base upward.
2. Remove the screw of a Projector cabinet
and remove the 2 filters.
(Keep the removed screw and filters.)
FILTER BASE
Pull part(A) to the front and pull the
Filter base upward.
Filter can be separate three parts
Pull part(D) and pull the Filter-A and B upward.
1AA6P1P4819-- (IDYW)
PLATE
FILTER BASE
Insert 5 hook parts of the filter
base into the slots and push
downward.
Attach the Filter Base
FILTER
SCREW
FILTER
C
B
- 1 - - 3 -
- 2 - - 4 -
-
1
-
2
-
3
