TP-LINK Tapo C400 Smart Wire Free Security Camera System ユーザーガイド
- カテゴリー
- カメラアクセサリー
- タイプ
- ユーザーガイド
このマニュアルも適しています
TP-LINK tp-link Tapo C400 Smart Wire Free Security Camera Systemは、防犯に役立つスマートセキュリティカメラシステムです。カメラは、モーションセンサーを搭載しており、動きを検知すると、自動的に録画を開始します。録画した映像は、microSDカードに保存されるため、後で確認することができます。また、カメラには、夜間でも鮮明な映像を撮影できるナイトビジョン機能も搭載されています。
さらに、このカメラは、スマホアプリと連動しており、外出先からでも映像を確認することができます。また、スマホアプリから、カメラの向きを遠隔操作することもできます。
TP-LINK tp-link Tapo C400 Smart Wire Free Security Camera Systemは、設置が簡単で、配線工事も不要なので、賃貸住宅や、設置場所を移動させたい場合にも便利です。また、カメラは、バッテリー駆動なので、電源の近くに設置する必要がなく、自由に設置場所を選ぶことができます。
TP-LINK tp-link Tapo C400 Smart Wire Free Security Camera Systemは、防犯に役立つスマートセキュリティカメラシステムです。カメラは、モーションセンサーを搭載しており、動きを検知すると、自動的に録画を開始します。録画した映像は、microSDカードに保存されるため、後で確認することができます。また、カメラには、夜間でも鮮明な映像を撮影できるナイトビジョン機能も搭載されています。
さらに、このカメラは、スマホアプリと連動しており、外出先からでも映像を確認することができます。また、スマホアプリから、カメラの向きを遠隔操作することもできます。
TP-LINK tp-link Tapo C400 Smart Wire Free Security Camera Systemは、設置が簡単で、配線工事も不要なので、賃貸住宅や、設置場所を移動させたい場合にも便利です。また、カメラは、バッテリー駆動なので、電源の近くに設置する必要がなく、自由に設置場所を選ぶことができます。
*Images may dier from your actual product.
©2022 TP-Link 7106509765 REV1.0.0
03 / Set Up Hub
and Camera
1. Get the Tapo app from the App Store or
Google Play.
1. Twist anti-clockwise and then pull to remove
the cover of the camera. Insert the battery.
Note:
1. Charge the battery before use. It will take about 5~6 hours.
2. If you want to use the camera while charging the battery, we
recommend purchasing another battery for your convenience.
2. Align the indicator line on the cover with the
arrow icon on the camera body.
Press and rotate clockwise to the lock position
to replace the cover.
2. Follow the instructions in the Tapo app to set
up your hub.
3. Follow the instructions in the Tapo app to set
up your camera.
OR
05 / Mount
to the Wall
04 / Installation
Options
Stick the mounting template
to the desired mounting
place. Drill 3 holes according
to the template.
1. Drill HolesOption 1. Set on a Table
Install
Option 2. Mount to the Wall
01 / Charge the
Battery
Method 2: Battery Inside Camera
*Check the battery status in the Tapo app after setup.
02 / Insert the
Battery
2. Install the Bracket
Insert three anchors into
the holes and use the
screws to ax the bracket
over the anchors.
3. Install the Camera
Install the camera on the
mounting bracket, and
adjust the camera angle.
Rotate to secure
the bracket
Rotate after installing
Rotate to secure
the bracket
Rotate after installing
Install
5V USB Charger
RES
SYNC
ET
/
Solid amber
Solid green
Method 1: Battery
5V USB Charger
Charging:
Fully charged:
Closed
Open
Smart Wire-Free Security
Camera System
Quick Start Guide
1
2
Tapo C400
• Do not use damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Do not use the device where wireless devices are not allowed.
• Adapter shall be easily accessible.
• Use only power supplies which are provided by manufacturer and in
the original packing of this product. If you have any questions, please
don't hesitate to contact us.
• Keep the device away from re or hot environments. DO NOT
immerse in water or any other liquid.
• Do not disassemble, repair or modify the product.
• Do not place near automatically controlled devices such as re
alarms. Radio waves emitted from this product may cause such
devices to malfunction resulting in an accident.
• Observe restrictions on using wireless products in fuel depots,
chemical plants or when blasting operations are in progress.
• Do not use liquid to clean the product. Only use a dry cloth.
• Never put metal objects inside the product. If a metal object enters
the product turn o the circuit breaker and contact an authorised
electrician.
• This product is not intended to be used when providing medical care.
Consult the manufacturer of any personal medical devices, such as
pacemakers or hearing aids to determine if they are adequality
shielded from external RF (radio frequency) energy.
• Do not use this product in health care facilities. Hospitals or health
care facilities may be using equipment that could be sensitive to
external RF energy.
• Do not place heavy objects on top of the product.
• When you leave the product unused for a long time unplug the
product from the power outlet.
• Product should be kept away from heat sources such as radiators,
cookers etc. - it should not be placed in places where the
temperature is less than -20 degrees or greater than 45 degrees.
• This product may interfere with other electronic products such as TV,
radios, personal computers, phones or other wireless devices.
• Always follow the local waste and recycle laws when you get rid of the
used battery.
TP-Link hereby declares that the device is in compliance with the
essential requirements and other relevant provisions of directives
2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at
https://www.tapo.com/support/ce/
TP-Link hereby declares that the device is in compliance with the
essential requirements and other relevant provisions of the Radio
Equipment Regulations 2017.
The original UK declaration of conformity may be found at
https://www.tapo.com/support/ukca/
Camera Appearance Hub Appearance Light Indications
Hub Status LED
Solid amber
Blinking red quickly
Solid red
Solid green
Blinking green quickly
Starting up
Connected to the cloud
Connected to router
Hub resetting
Hub updating
Blinking red and green Ready for setup
Blinking green slowly Pairing
Camera Status LED
Blinking red and green
Solid Red
Blinking red once a minute
Blinking green quickly Camera updating
Blinking red quickly Camera resetting
Ready for pairing
Pairing
Blinking red slowly
Blinking green slowly
Solid green Connected to the cloud
Solid amber Connected to the hub
Starting up
Low battery
Oine
CAUTION!
Avoid replacement of a battery with an incorrect type that can
defeat a safeguard.
Avoid disposal of a battery into re or a hot oven, or
mechanically crushing or cutting of a battery, that can result in
an explosion.
Do not leave a battery in an extremely high temperature
surrounding environment that can result in an explosion or the
leakage of ammable liquid or gas; Do not leave a battery
subjected to extremely low air pressure that may result in an
explosion or the leakage of ammable liquid or gas.
CAUTION!
Risk of re or explosion
if the battery is replaced by an incorrect type
Safety Information
Camera Operating Temperature: -20 °C ~ 45°C (-4°F ~ 113°F)
Camera Operating Humidity: 10%~90%RH, Non-condensing
Hub Operating Temperature: 0 °C ~ 40°C (32°F ~ 104°F)
Hub Operating Humidity: 10%~90%RH, Non-condensing
Please read and follow the above safety information when
operating the device. We cannot guarantee that no accidents or
damage will occur due to improper use of the device. Please use
this product with care and operate at your own risk.
For technical support, user guides,
FAQs, warranty and more, please visit
www.tapo.com/support/
▲microSD card not included.
1SYNC Button
Press to pair with the camera, or silence the hub when it rings.
2RESET
Use a pin to press and hold for about 5 seconds until the hub
LED quickly blinks red to reset the hub.
3microSD Card Slot
Insert a microSD card to record camera videos locally.
Initialize the microSD card within the Tapo app rst.
4Status LED
Indicate the status of your hub.
Indicate the status of your camera. While the camera is powered on:
Front Back
Micro SD
1 2 3
4
1
3Motion Sensor
4Status LED
2Light Sensor
Lens
5Microphone
SYNC/RESET Button
7
Press for 1 second: Pair with the hub
Press and hold for about 5 seconds: Reset the camera
RES
SYNC
ET
/
7
42 5
1
3
2400~2483.5MHz/20dBm 863~865MHz/25mW(e.r.p)
863~868.6MHz/25mW(e.r.p)
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also
complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other
antenna or transmitter. End-users and installers must be provided with antenna installation instructions and
consider removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
BSMI Notice
安全諮詢及注意事項
請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。
清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。
注意防潮，請勿將水或其他液體潑灑到本產品上。
插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋開口。請勿將本產品置放於靠近熱
源的地方。除非有正常的通風，否則不可放在密閉位置中。不要私自拆開機殼或自行維修，如產品有故障請與原廠
或代理商聯繫。
NCC Notice
注意！
取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之
特性及功能。
低功率射頻器材之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時
方得繼續使用。
前述合法通信，指依電信管理法規定作業之無線電通信。
低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
產品元件
名稱
限用物質及其化學符號
多溴二苯醚
PBDE
多溴聯苯
PBB
六價鉻
Cr+6
汞
Hg
鎘
Cd
鉛
Pb
PCB
電源適配器
外殼
備考1. "超出0.1 wt %" 及 "超出0.01 wt %" 系指限用物質之百分比含量超出百分比含量基準
值。
備考2. "○"系指該項限用物質之百分比含量未超出百分比含量基準值。
備考3. "−" 系指該項限用物質為排除項目。
○
○
○
限用物質含有情況標示聲明書
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
-
1
-
2
-
3
TP-LINK Tapo C400 Smart Wire Free Security Camera System ユーザーガイド
- カテゴリー
- カメラアクセサリー
- タイプ
- ユーザーガイド
- このマニュアルも適しています
TP-LINK tp-link Tapo C400 Smart Wire Free Security Camera Systemは、防犯に役立つスマートセキュリティカメラシステムです。カメラは、モーションセンサーを搭載しており、動きを検知すると、自動的に録画を開始します。録画した映像は、microSDカードに保存されるため、後で確認することができます。また、カメラには、夜間でも鮮明な映像を撮影できるナイトビジョン機能も搭載されています。
さらに、このカメラは、スマホアプリと連動しており、外出先からでも映像を確認することができます。また、スマホアプリから、カメラの向きを遠隔操作することもできます。
TP-LINK tp-link Tapo C400 Smart Wire Free Security Camera Systemは、設置が簡単で、配線工事も不要なので、賃貸住宅や、設置場所を移動させたい場合にも便利です。また、カメラは、バッテリー駆動なので、電源の近くに設置する必要がなく、自由に設置場所を選ぶことができます。
