快速入门指南
8
快速入门指南
C
EU
标准符合声明
雷尼绍公司在自行承担责任的情况下特此声明,
NC4+ Blue
非接触式对刀系统符合所有适用欧盟法
规。
如需查阅
EU
标准符合声明全文,请访问
www.renishaw.com.cn/mtpdoc
REACH
法规
如需获取第
1907/2006 (EC)
号法规
(
“
REACH
”
)
之第
33(1)
条针对含有高度关注物
质
(SVHC)
的产品要求提供的信息,请访问
www.renishaw.com.cn/REACH
废弃电子电气设备
(WEEE)
指令
在产品及
/
或随机文件中使用本符号,表示本
产品不可与普通生活垃圾混合处置。最终用户有
责任在指定的废弃电子电气设备
(WEEE)
收集点
处置本产品,以实现重新利用或循环使用。正确
处置本产品有助于节省宝贵的资源,并防止对环
境的负面影响。如需更多信息,请与当地的废品
处置服务商或经销商联系。
Safety
Information to the user
In all applications involving the use of machine
tools or CMMs, eye protection is recommended.
Information for the machine supplier/
installer
It is the machine supplier’s responsibility to
ensure that the user is made aware of any
hazards involved during operation, including
those mentioned in Renishaw product literature,
and to ensure that adequate guards and safety
interlocks are provided.
Under certain circumstances, the probe signal
may falsely indicate beam not blocked. Do not
rely on probe signals to halt the movement of the
machine.
Information to the equipment installer
All Renishaw equipment is designed to comply
with the relevant EU and FCC regulatory
requirements. It is the responsibility of the
equipment installer to ensure that the following
guidelines are adhered to, in order for the product
to function in accordance with these regulations:
• any interface MUST be installed in a position
away from any potential sources of electrical
noise, i.e. power transformers, servo drives
etc;
• all 0 V/ground connections should be
connected to the machine “star point” (the
“star point” is a single point return for all
equipment ground and screen cables). This
is very important and failure to adhere to this
can cause a potential difference between
grounds;
• all screens must be connected as outlined in
the user instructions;
• cables must not be routed alongside high
current sources, i.e. motor power supply
cables etc. or be near high-speed data lines;
• cable lengths should always be kept to a
minimum.