MDQ17AI Quick Reference Guide/ 快速测试参考指南
No. Code Descripon
1 FP_AUDIO Front audio header
2 SPKR Speaker cable connector
3 MIC_IN Audio Mic In port
4 LINE_OUT Audio Line Out port
5 USB3_2 USB 3.0 ports
6 USB3_1 USB 3.0 ports
7 NFC NFC connector
8 HDMI HDMI port
9 DP Display port connector
10 LAN GbE LAN port
11 BATTERY Baery cable connector
12 CLR_CMOS Clear CMOS jumper
13 DC_IN DC In power connector
14 ATX_19V 2 pin power connector
15 SATAIII_3 SATA 6Gb/s connector
16 FUSB3_1 USB 3.0 header
17 SATAIII_2 SATA 6Gb/s connector
18 SATAIII_1 SATA 6Gb/s connector
19 SATAIII_0 SATA 6Gb/s connector
20 SATA_PWR Hard disk power connector
21 CPU_FAN CPU fan connector
22 SYS_PANEL Front panel header
23 MON_SW Monitor power switch header
24 SYS_FAN System fan connector
25 SODIMM2 DDR3L SO-DIMM slot#2
26 SODIMM1 DDR3L SO-DIMM slot#1
27 LCD_VCC LVDS Logic/LCD Drive Voltage jumper
FPD_PWR LVDS Back Light Power Select jumper
28 LVDS LVDS connector
29 FPD Flat Panel Display connector
30 BL_SW Back light brightness switch
31 FUSB2_3 USB 2.0 header
32 CPU Intel LGA1151 socket
33 FUSB2_2 USB 2.0 header
34 FUSB2_4 USB 2.0 header
35 M2_E M.2 slot (PCIe Gen3 x1, Support NGFF-2230, E-Key)
36 COM1 Serial port cable connector
37 PCIE4X PCI Express x4 slot
38 M2_M M.2 slot (PCIe Gen3 x4 or SATA 6Gb/s x1,
Support NGFF-2260/2280, M-Key)
39 DMIC_CON Digital Mic connector
3421 5 87 10 11
14
1312
15
16
17
18
19
24
21
22
23
2526
27
3031 2829323334
36
35
37
38
39
20
96
Front Panel Header/
No. Pin Define
1 HDD LED+
2 Power LED+
3 HDD LED-
4 Power LED-
5 GND
6 Power Buon+
7 Reset Buon
8 Power Buon-
9 GND
10 No Pin
1
109
2
Power Connector/
2
1No. Pin Define
1 GND
2 19V
Installing CPU/ 安装 CPU
USB 3.0 Header
1110
201
No. Pin Define
1 Power
2 IntA_P1_SSRX-
3 IntA_P1_SSRX+
4 GND
5 IntA_P1_SSTX-
6 IntA_P1_SSTX+
7 GND
8 IntA_P1_D-
9 IntA_P1_D+
10 OC
11 IntA_P2_D+
12 IntA_P2_D-
13 GND
14 IntA_P2_SSTX+
15 IntA_P2_SSTX-
16 GND
17 IntA_P2_SSRX+
18 IntA_P2_SSRX-
19 Power
20 No Pin
USB 2.0 Header
No. Pin Define
1 Power (5V)
2 Power (5V)
3 USB DX-
4 USB DY-
5 USB DX+
10
9
2
1
No. Pin Define
1 VCC
2 USB-
3 USB+
4 GND
5 No Pin
15
No. Pin Define
6 USB DY+
7 GND
8 GND
9 No Pin
10 No Connect
1 9
102
Serial Port Cable Connector
No. Pin Define
1 NDCD-
2 NDSR-
3 NRXD-
4 NRTS-
5 NTXD-
No. Pin Define
6 NCTS-
7 NDTR-
8 RI-/12V/5V
9 GNND
10 No Connect
Memory Populaon Configuraon/ 安装内存
1
2
Rear I/O Connector/ 后面板接口
Off
State Description
Amber On 1Gbps data arte
Green On 100Mbps data arte
10Mbps data arte
10/100/1000 LAN LED:
Speed LED Link/Acvity
LED
No. Desripon
1 DC In power connector
2 GbE Eternet LAN port
3 Display port connector
4 HDMI port
No. Desripon
5 USB 3.0 ports
6 Line Out port (Green)
7 Mic In port (Pink)
The HDMI connector is HDCP compliant and supports Dolby True HD and DTS HD
Master Audio formats. It also supports up to 192KHz/24bit 8-channel LPCM audio
output. You can use this port to connect your HDMI-supported monitor. The
maximum supported resoluon is 4096x2160@24Hz or 2560x1600@60Hz, but the
actual resoluons supported are dependent on the monitor being used.
SATA Connector/SATA 接口
1
7No. Pin Define
1 GND
2 TXP
3 TXN
4 GND
5 RXN
6 RXP
7 GND
Hard disk power connectornnector
No. Pin Define
1 VCC3
2 VCC3
3 VCC3
4 GND
5 GND
6 GND
7 VCC
8 VCC
9 VCC
10 GND
1
N2 No. Pin Define
11 GND
12 GND
13 +12V
14 +12V
15 +12V
P1 GND
P2 GND
N1 GND
N2 GND
LVDS
No. Pin Define
1 +RXO3_C
2 -RXO3_C
3 +RXO2_C
4 -RXO2_C
5 +RXO1_C
6 -RXO1_C
7 +RXO0_C
8 -RXO0_C
9 +RXE3_C
10 -RXE3_C
401
No. Pin Define
11 +RXE2_C
12 -RXE2_C
13 +RXE1_C
14 -RXE1_C
15 +RXE0_C
16 -RXE0_C
17 GND
18 LCD_VCC
19 LCD_VCC
20 LCD_VCC
No. Pin Define
21 No Connect
22 VCC3
23 GND
24 -Cable Detect
25 GND
26 +RXECLKO_C
27 -RXECLKO_C
28 GND
29 GND
30 GND
No. Pin Define
31 SMB_CLK_CON
32 SC_BKLT_EN
33 SC_BKLT_CTRL
34 +RXECLKE_C
35 -RXECLKE_C
36 FPD_19V
37 FPD_19V
38 FPD_19V
39 No Connect
40 SMB_DATA_CON
18
Flat Panel Display Connector
No. Pin Define
1 Backlight enable
2 Backlight control
3 Backlight inverter power
4 Backlight inverter power
5 GND
6 GND
7 Panel brightness increase
8 Panel brightness decrease
Front Audio Connector/ 前置音频
No. Pin Define
1 MIC2_L
2 GND
3 MIC2_R
4 FP_AUDIO_DET
5 LINE2_R
2
1
10
9No. Pin Define
6 MIC2_JD
7 GND
8 No Pin
9 LINE2_L
10 LINE2_JD
Speaker Cable Connector
No. Pin Define
1 Speaker Out R-
2 Speaker Out R+
3 Speaker Out L+
4 Speaker Out L-
41
Back Light Switch Header
21
No. Pin Define
1 Back light down
2 Back light up
Baery Cable Connector
No. Pin Define
1 Baery+
2 GND
2 1
CPU/System FAN/
4
1
4
1
No. Pin Define
1 GND
2 +12V
3 Sense
4 Speed Control
Monitor Power Switch
No. Pin Define
1 High/Low: turn on/off monitor
2 GND
2
1
Digital MIC In Connector
5
1
No. Pin Define
1 VCC
2 DMIC DATA
3 GND
4 DMIC CLK
5 No Pin
No. Desripon
1 Clear CMOS Jumper
Open: Normal operaon (Default seng)
Close: Clear CMOS data.
2 LVDS Back Light Power Select Jumper
1-2 Close: Set to 12V.
2-3 Close: Set to 19V. (Default seng)
3 LVDS Logic/LCD Drive Voltage Jumper
1-2 Close: Set to 3V.
2-3 Close: Set to 5V. (Default seng)
Jumper Sengs/ 跳线设置
23
1
1 2
3 4 76
5 5
PN:12QM1-MDQ170-00R
Regulatory Noces Connect With Us
WEEE Symbol Statement For more informaon, visit our website at:
hp://b2b.gigabyte.com
You are a professional?
Get access to our complete source of sales & markeng materials at:
hp://reseller.b2b.gigabyte.com
Join our server forum to discuss our products and get technical assistance at:
hp://forum.b2b.gigabyte.com
hps://www.facebook.com/gigabyteserver
The symbol shown below is on the product or on its packaging, which indicates that this product must not be disposed of with other
waste. Instead, the device should be taken to the waste collecon centers for acvaon of the treatment, collecon, recycling and
disposal procedure. The separate collecon and recycling of your waste equipment at the me of disposal will help to conserve
natural resources and ensure that it is recycled in a manner that protects human health and the environment.
For more informaon about where you can drop off your waste equipment for recycling, please contact your local government
office, your household waste disposal service or where you purchased the product for details of environmentally safe recycling.
When your electrical or electronic equipment is no longer useful to you, "take it back" to your local or regional waste
collecon administraon for recycling.
If you need further assistance in recycling, reusing in your "end of life" product, you may contact us at the Customer Care
number listed in your product's user's manual and we will be glad to help you with your effort.
GIGABYTE产品未故意添加和使用有害物质（Cd、Pb、Hg、Cr+6、PBDE和PBB）。所有部件和元件均经过严格挑选，符合RoHS要求。此
外，我们GIGABYTE一直致力于开发不使用国际上禁止的有毒化学品的产品。
GIGABYTE products have not intended to add and safe from hazardous substances (Cd, Pb, Hg, Cr+6, PBDE and PBB). The parts and components
have been carefully selected to meet RoHS requirement. Moreover, we at GIGABYTE are connuing our efforts to develop products that do not use
internaonally banned toxic chemicals.
Restricon of Hazardous Substances (RoHS) Direcve Statement
限制使用有害物质 (RoHS) 指令声明
California Proposion 65 Warning
WARNING:
This product contains a chemicals , including lead, known to the State of California to cause cancer and birth defects or other reproducve harm.
For more informaon, please visit: hp://www.p65warnings.ca.gov/
Baery Warning:
Incorrectly installing a baery or using incompable baery may increase the risk of ifre explosion. Replace the baery only with
the same or equivalent type.
Do not disassemble, crush, punchture baeries.
Do not store or place your baery pack next to or in a heat source such as a fire, heatgenerang appliance, can or exhaust
vent. Heang baery cells to temperatures above 65oC (149oF) can cause explosion or fire.
Do not aempt to open or service baeries. Do not dispose of baeries in a fire or with household waste.
电池警告：
电池安装不当或使用不兼容的电池会增加火灾爆炸风险。更换电池时，只可使用相同或同等类型的电池。
请勿拆解、挤压、刺破电池。
请勿将电池存放或放置在热源中或旁边，如火源、产生热的设备、罐体或排气口。电池温度升至65oC (149oF)以上
可能导致爆炸或火灾。
请勿尝试打开或维修电池。电池废弃时，请勿投入火中或者作为家庭废弃物进行处理。
依照中华人民共和国的有毒有害物质的限制要求(China RoHS)提供以下的表格：
中华人民共和国电子信息产品中有毒有害物质或元素的名称及含量标识格式
-
1
-
2
