MAGNUM SERIES PLATFORMS
2
4
6
8
10
12
14
ENGLISH
2
TRAINING AREA
8 x 6 ft
2.44 x 1.83 m
FREE AREA
0.6 M (2 FT)
WIDE PATH
TRAINING AREA
8 x 4 ft
2.44 x 1.22 m
FREE AREA
0.6 M (2 FT)
WIDE PATH
TRAINING AREA
8 x 6 ft
2.44 x 1.83 m
FREE AREA
0.6 M (2 FT)
WIDE PATH
ENGLISH
TRAINING AREA
8 x 4 ft
2.44 x 1.22 m
FREE AREA
0.6 M (2 FT)
WIDE PATH
3
PROPER USAGE
1. Do not exceed weight limits of the exercise device.
2. If applicable, set safety stops to appropriate height.
3. If applicable, adjust seat pads, leg pads, foot pads, range of motion
adjustment, or any other type of adjustment mechanisms to a comfortable
start position. Make certain that the adjusting mechanism is fully
engaged to prevent unintentional movement and to avoid injury.
4. Sit on bench (if applicable) and get into appropriate position for exercise.
5. Exercise using no more weight than you can safely lift and control.
6. In a controlled manner, perform exercise.
7. Return weight to its fully-supported start position.
WARRANTY
For North America, please visit www.matrixfitness.com for warranty
information along with warranty exclusions and limitations.
MAINTENANCE CHECKLIST
ACTION FREQUENCY
Inspect Hardware Monthly
Inspect Frame Bi-Annually
Clean Platform
1
As Needed
1
Hardwood: Use hardwood cleaner.
Rubber: Use Taski Profi cleaner
ENGLISH
PRODUCT SPECIFICATIONS
Overall Dimensions (L x W x H) * Product Weight Max Training Max User
CM IN KG LBS KG LBS KG LBS
MG-MA4794P-06 366 254 7 144 100 2.6 209 460 408.5 900 181.5 400
MG-MA4794P-4-06 305 254 7 120 100 2.6 162 356 408.5 900 181.5 400
MG-MA9091P-06 330 254 7 130 100 2.6 199 439 408.5 900 181.5 400
MG-MA9091P-4-06 270 254 7 106 100 2.6 152.5 336 408.5 900 181.5 400
MG-A691SP-06 280 254 7 110 100 2.6 193 426 408.5 900 181.5 400
MG-A691SP-4-06 219 254 7 86 100 2.6 146.5 323 408.5 900 181.5 400
MG-MARP4794-06 366 254 7 144 100 2.6 242 533 408.5 900 181.5 400
MG-MARP4794-4-06 305 254 7 120 100 2.6 189 417 408.5 900 181.5 400
MG-MARP9091-06 330 254 7 130 100 2.6 229 505 408.5 900 181.5 400
MG-MARP9091-4-06 270 254 7 106 100 2.6 177 390 408.5 900 181.5 400
MG-RP691S-06 280 254 7 110 100 2.6 220 485 408.5 900 181.5 400
MG-RP691S-4-06 219 254 7 86 100 2.6 168 370 408.5 900 181.5 400
MG-PS86-06 191 254 7 75 100 2.6 166 365 408.5 900 181.5 400
MG-RP86-06 191 254 7 75 100 2.6 182.5 402 408.5 900 181.5 400
MG-PS84-06 131 254 7 51.5 100 2.6 119 262 408.5 900 181.5 400
MG-RP84-06 131 254 7 51.5 100 2.6 130 286 408.5 900 181.5 400
* Ensure a minimum clearance width of 0.6 meters (24”) for access to and passage around MATRIX strength equipment. Please note, 0.91 meters (36”) is the ADA
recommended clearance width for individuals in wheelchairs.
TORQUE VALUES
½ - 13” Bolt (Nyloc Nut & Flowdrill) 135 Nm / 100 ft-lbs.
⅜ - 16” Bolt (Nyloc Nut & Flowdrill) 77 Nm / 57 ft -lbs.
⁄ - 18” Bolts
25 Nm / 18 ft-lbs.
⁄ - 18” Plastic
15 Nm / 11 ft-lbs.
¼ - 20" Bolts 15 Nm / 11 ft-lbs.
Pad Bolts 10 Nm / 7 ft-lbs.
4
IMPORTANT SAFETY INFORMATION
It is the sole responsibility of the purchaser of MATRIX products to instruct all individuals,
whether they are the end user or supervising personnel on proper usage of the equipment.
It is recommended that all users of MATRIX exercise equipment be
informed of the following information prior to its use.
Do not use any equipment in any way other than designed or intended by the manufacturer.
It is imperative that MATRIX equipment be used properly to avoid injury.
INSTALLATION
1. STABLE AND LEVEL SURFACE: MATRIX exercise equipment must
be installed on a stable base and properly leveled.
2. SECURING EQUIPMENT: Manufacturer recommends that all stationary MATRIX
strength equipment be secured to the floor to stabilize equipment and eliminate
rocking or tipping over. This must be performed by a licensed contractor.
3. Under no circumstances should you slide equipment across the floor due to risk of tipping. Use
proper materials handling techniques and equipment recommended by OSHA.
All anchor points must be able to withstand 750 lbs. (3.3 kN) pull-out force.
MAINTENANCE
1. DO NOT use any equipment that is damaged and or has worn or broken parts.
Use only replacement parts supplied by your country’s local MATRIX dealer.
2. MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason. They contain
important information. If unreadable or missing, contact your MATRIX dealer for a replacement.
3. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to
smooth operating equipment as well as keeping your liability to a
minimum. Equipment needs to be inspected at regular intervals.
4. Ensure that any person(s) making adjustments or performing maintenance or
repair of any kind is qualified to do so. MATRIX dealers will provide service
and maintenance training at our corporate facility upon request.
ADDITIONAL NOTES
This equipment should only be used in supervised areas where access and control is specifically
regulated by the owner. It is up to the owner to determine who is allowed access to this training
equipment. The owner should consider a user’s: degree of reliability, age, experience, etc.
This training equipment meets industry standards for stability when used for its intended
purpose in accordance with the instructions provided by the manufacturer.
This equipment is for indoor use only. This training equipment is designed
for use in a commercial environment such as a fitness facility. Platforms may
slide if placed on the following surfaces: Turf, concrete, tile, linoleum.
TOOLS REQUIRED FOR ASSEMBLY
4MM Allen Wrench (included)
Phillips Screwdriver (not included)
½” Wrench (not included)
⁄” Wrench (not included)
UNPACKING
Thank you for purchasing a MATRIX Fitness product. It is inspected before it is
packaged. It is shipped in multiple pieces to facilitate the compact packaging of
the machine. Prior to assembly, confirm all the components by matching them
with the exploded diagrams. Carefully unpack the unit from this box and dispose
of the packing materials in accordance with your local laws. Exercise device must
be assembled by a trained assembly team or be pre-assembled prior to delivery.
CAUTION
To avoid injury to yourself and prevent damage to the frame components,
be sure to have proper assistance removing the frame pieces from this box.
Please be sure to install the equipment on a stable base, and properly level the
machine. Ensure a minimum clearance width of 0.6 meters (24”) for access to
and passage around MATRIX strength equipment. Please note, 0.91 meters
(36”) is the ADA recommended clearance width for individuals in wheelchairs.
ENGLISH
5
ENGLISH
HARDWOOD PLATFORMS
MG-MA4794P-06
MG-MA4794P-4-06
MG-MA9091P-06
MG-MA9091P-4-06
MG-A691SP-06
MG-A691SP-4-06
A
B
C
3
Hardware Qty
A
B
C
Hex Bolt (⁄-16 x 1” Zinc)
Washer (⁄” Zinc)
Flange Bolt
(⁄-18 x 1” Black Zinc)
4
4
4
C
D
E
ASSEMBLY COMPLETE
1
2
6
Hardware Qty
C Flange Bolt
(⁄-18 x 1” Black Zinc)
12
5
Hardware Qty
E
Screw (#6 x 1⁄")
10
4
Hardware Qty
D
Bolt (⁄-20 x 2" Bronze)
3
6
D
A
B
C
ENGLISH
C
D
ASSEMBLY COMPLETE
1
2
7
RUBBER PLATFORMS
MG-MARP4794-06
MG-MARP4794-4-06
MG-MARP9091-06
MG-MARP9091-4-06
MG-RP691S-06
MG-RP691S-4-06
6
Hardware Qty
C Flange Bolt
(⁄-18 x 1” Black Zinc)
12
5
Hardware Qty
D
Screw (#6 x 1⁄")
10
4
Hardware Qty
D
Screw (#6 x 1⁄")
3
3
Hardware Qty
A
B
C
Hex Bolt (⁄-16 x 1” Zinc)
Washer (⁄” Zinc)
Flange Bolt
(⁄-18 x 1” Black Zinc)
4
4
4
7
ENGLISH
A
B
3
ASSEMBLY COMPLETE
2
Hardware Qty
B Flange Bolt
(⁄-18 x 1” Black Zinc)
16
STAND-ALONE HARDWOOD
MG-PS86-06
MG-PS84-06
1
Hardware Qty
A
Screw (#6 x 1⁄")
10
A
B
2
Hardware Qty
B Flange Bolt
(⁄-18 x 1” Black Zinc)
16
STAND-ALONE RUBBER
MG-RP86-06
MG-RP84-06
3
1
Hardware Qty
A
Screw (#6 x 1⁄")
10
ASSEMBLY COMPLETE
8
8 x 6 英尺
2.44 x 1.83 公尺
)
8 x 4 英尺
2.44 x 1.22 公尺
)
8 x 6 英尺
2.44 x 1.83 公尺
)
8 x 4 英尺
2.44 x 1.22 公尺
)
9
1
1
KG LBS KG LBS KG LBS
MG-MA4794P-06 366 254 7 144 100 2.6 209 460 408.5 900 181.5 400
MG-MA4794P-4-06 305 254 7 120 100 2.6 162 356 408.5 900 181.5 400
MG-MA9091P-06 330 254 7 130 100 2.6 199 439 408.5 900 181.5 400
MG-MA9091P-4-06 270 254 7 106 100 2.6 152.5 336 408.5 900 181.5 400
MG-A691SP-06 280 254 7 110 100 2.6 193 426 408.5 900 181.5 400
MG-A691SP-4-06 219 254 7 86 100 2.6 146.5 323 408.5 900 181.5 400
MG-MARP4794-06 366 254 7 144 100 2.6 242 533 408.5 900 181.5 400
MG-MARP4794-4-06 305 254 7 120 100 2.6 189 417 408.5 900 181.5 400
MG-MARP9091-06 330 254 7 130 100 2.6 229 505 408.5 900 181.5 400
MG-MARP9091-4-06 270 254 7 106 100 2.6 177 390 408.5 900 181.5 400
MG-RP691S-06 280 254 7 110 100 2.6 220 485 408.5 900 181.5 400
MG-RP691S-4-06 219 254 7 86 100 2.6 168 370 408.5 900 181.5 400
MG-PS86-06 191 254 7 75 100 2.6 166 365 408.5 900 181.5 400
MG-RP86-06 191 254 7 75 100 2.6 182.5 402 408.5 900 181.5 400
MG-PS84-06 131 254 7 51.5 100 2.6 119 262 408.5 900 181.5 400
MG-RP84-06 131 254 7 51.5 100 2.6 130 286 408.5 900 181.5 400
½ - 13” 135 Nm / 100 ft-lbs
⅜ - 16” 77 Nm / 57 ft -lbs
⁄ - 18”
25 Nm / 18 ft-lbs
⁄ - 18”
15 Nm / 11 ft-lbs
¼ - 20" 15 Nm / 11 ft-lbs
10 Nm / 7 ft-lbs
10
½”
⁄”
11
MG-MA4794P-06
MG-MA4794P-4-06
MG-MA9091P-06
MG-MA9091P-4-06
MG-A691SP-06
MG-A691SP-4-06
A
B
C
3
A
B
C
(⁄-16 x 1” Zinc)
(⁄” Zinc)
(⁄-18 x 1” Black Zinc)
4
4
4
C
D
E
1
2
6
C
(⁄-18 x 1” Black Zinc)
12
5
E
(#6 x 1⁄")
10
4
D
(⁄-20 x 2" Bronze)
3
12
D
A
B
C
C
D
1
2
7
MG-MARP4794-06
MG-MARP4794-4-06
MG-MARP9091-06
MG-MARP9091-4-06
MG-RP691S-06
MG-RP691S-4-06
6
C
(⁄-18 x 1” Black Zinc)
12
5
D
(#6 x 1⁄")
10
4
D
(#6 x 1⁄")
3
3
A
B
C
(⁄-16 x 1” Zinc)
(⁄” Zinc)
(⁄-18 x 1” Black Zinc)
4
4
4
13
A
B
3
2
B
(⁄-18 x 1” Black Zinc)
16
MG-PS86-06
MG-PS84-06
1
A
(#6 x 1⁄")
10
A
B
2
B
(⁄-18 x 1” Black Zinc)
16
MG-RP86-06
MG-RP84-06
3
1
A
(#6 x 1⁄")
10
14
8 x 6 フィート
2.44 x 1.83 m
)
8 x 4 フィート
2.44 x 1.22 m
)
8 x 6 ft
2.44 x 1.83 m
)
8 x 4 フィート
2.44 x 1.22 m
)
15
1
1
CM
KG
KG
KG
MG-MA4794P-06 366 254 7 144 100 2.6 209 460 408.5 900 181.5 400
MG-MA4794P-4-06 305 254 7 120 100 2.6 162 356 408.5 900 181.5 400
MG-MA9091P-06 330 254 7 130 100 2.6 199 439 408.5 900 181.5 400
MG-MA9091P-4-06 270 254 7 106 100 2.6 152.5 336 408.5 900 181.5 400
MG-A691SP-06 280 254 7 110 100 2.6 193 426 408.5 900 181.5 400
MG-A691SP-4-06 219 254 7 86 100 2.6 146.5 323 408.5 900 181.5 400
MG-MARP4794-06 366 254 7 144 100 2.6 242 533 408.5 900 181.5 400
MG-MARP4794-4-06 305 254 7 120 100 2.6 189 417 408.5 900 181.5 400
MG-MARP9091-06 330 254 7 130 100 2.6 229 505 408.5 900 181.5 400
MG-MARP9091-4-06 270 254 7 106 100 2.6 177 390 408.5 900 181.5 400
MG-RP691S-06 280 254 7 110 100 2.6 220 485 408.5 900 181.5 400
MG-RP691S-4-06 219 254 7 86 100 2.6 168 370 408.5 900 181.5 400
MG-PS86-06 191 254 7 75 100 2.6 166 365 408.5 900 181.5 400
MG-RP86-06 191 254 7 75 100 2.6 182.5 402 408.5 900 181.5 400
MG-PS84-06 131 254 7 51.5 100 2.6 119 262 408.5 900 181.5 400
MG-RP84-06 131 254 7 51.5 100 2.6 130 286 408.5 900 181.5 400
½ - 13” 135 Nm / 100 ft-lb
⅜ - 16” 77 Nm / 57 ft -lb
⁄ - 18”
25 Nm / 18 ft-lb
⁄ - 18”
15 Nm / 11 ft-lb
¼ - 20" 15 Nm / 11 ft-lb
10 Nm / 7 ft-lb
16
½”
⁄”
17
MG-MA4794P-06
MG-MA4794P-4-06
MG-MA9091P-06
MG-MA9091P-4-06
MG-A691SP-06
MG-A691SP-4-06
A
B
C
3
A
B
C
(⁄-16 x 1” Zinc)
(⁄” Zinc)
(⁄-18 x 1” Black Zinc)
4
4
4
C
D
E
1
2
6
C
(⁄-18 x 1” Black Zinc)
12
5
E
(#6 x 1⁄")
10
4
D
(⁄-20 x 2" Bronze)
3
18
D
A
B
C
C
D
1
2
7
MG-MARP4794-06
MG-MARP4794-4-06
MG-MARP9091-06
MG-MARP9091-4-06
MG-RP691S-06
MG-RP691S-4-06
6
C
(⁄-18 x 1” Black Zinc)
12
5
D
(#6 x 1⁄")
10
4
D
(#6 x 1⁄")
3
3
A
B
C
(⁄-16 x 1” Zinc)
(⁄” Zinc)
(⁄-18 x 1” Black Zinc)
4
4
4
19
A
B
3
2
B
(⁄-18 x 1” Black Zinc)
16
MG-PS86-06
MG-PS84-06
1
A
(#6 x 1⁄")
10
A
B
2
B
(⁄-18 x 1” Black Zinc)
16
MG-RP86-06
MG-RP84-06
3
1
A
(#6 x 1⁄")
10
20
8 x 6 ft
2.44 x 1.83 m
0.6)
8 x 4 ft
2.44 x 1.22 m
0.6)
8 x 6 ft
2.44 x 1.83 m
0.6)
8 x 4 ft
2.44 x 1.22 m
0.6)
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
/