Samsung BD-E5500 取扱説明書

カテゴリー
ブルーレイプレーヤー
タイプ
取扱説明書
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
Blu-ray
Disc Player
user manual
BD-E5500
ENGLISH
02229R-BD-E5500-XZ-ENG.indd 1 2012-04-20 오전 9:52:17
|
2 English
Safety Information
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a
CLASS 1 LASER product. Use of controls,
adjustments or performance of procedures
other than those specified herein may result in
hazardous radiation exposure.
CAUTION :
• CLASS 3B VISIBLE AND INVISIBLE
LASER RADIATION WHEN OPEN. AVOID
EXPOSURE TO THE BEAM (IEC 60825-1)
• THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE. DO NOT OPEN COVER AND
DO NOT REPAIR YOURSELF. REFER
SERVICING TO QUALIFIED PERSONNEL.
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LÁSER CLASE 1
Warning
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates "dangerous voltage"
inside the product that presents a risk of
electric shock or personal injury.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK) NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
This symbol indicates important instructions
accompanying the product.
Do not install this equipment in a confined
space such as a bookcase or similar unit.
WARNING
To prevent damage which may result in fire
or electric shock hazard, do not expose this
appliance to rain or moisture.
CAUTION
Blu-ray Disc Player USES AN INVISIBLE
LASER BEAM WHICH CAN CAUSE
HAZARDOUS RADIATION EXPOSURE IF
DIRECTED. BE SURE TO OPERATE Blu-ray
Disc Player CORRECTLY AS INSTRUCTED.
CAUTION
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE. DO NOT OPEN COVERS
AND DO NOT REPAIR YOURSELF. REFER
SERVICING TO QUALIFIED PERSONNEL.
This product satisfies CE regulations when
shielded cables and connectors are used
to connect the unit to other equipment.
To prevent electromagnetic interference
with electric appliances, such as radios
and televisions, use shielded cables and
connectors for connections.
IMPORTANT NOTE
The mains lead on this equipment is supplied
with a molded plug incorporating a fuse. The
value of the fuse is indicated on the pin face
of the plug.
If it requires replacing, a fuse approved to
BS1362 of the same rating must be used.
Never use the plug with the fuse cover
omitted if the cover is detachable. If a
replacement fuse cover is required, it must be
of the same colour as the pin face of the plug.
Replacement covers are available from your
dealer.
If the fitted plug is not suitable for the power
points in your house or the cable is not long
enough to reach a power point, you should
obtain a suitable safety approved extension
lead or consult your dealer for assistance.
However, if there is no alternative to cutting
off the plug, remove the fuse and then safely
dispose of the plug. Do not connect the plug
to a mains jack, as there is a risk of shock
hazard from the bared flexible cord.
To disconnect the apparatus from the mains,
the plug must be pulled out from the mains
socket, therefore the mains plug shall be
readily operable.
The product unit accompanying this user
manual is licenced under certain intellectual
property rights of certain third parties.
02229R-BD-E5500-XZ-ENG.indd 2 2012-04-20 오전 9:52:18
English 3
|
01 Safety Information
Precautions
Important Safety Instructions
Read these operating instructions carefully
before using the unit. Follow all the safety
instructions listed below.
Keep these operating instructions handy for
future reference.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
8. Do not install near any heat sources
such as radiators, heat registers,
stoves, or other apparatus (including AV
receivers) that produce heat.
9. Do not defeat the safety purpose of
the polarized or grounding-type plug.
A polarized plug has two blades with
one wider than the other. A grounding
type plug has two blades and a third
grounding prong. The wide blade or
the third prong are provided for your
safety. If the provided plug does not fit
into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles, and the
point where it exits the apparatus.
11. Only use attachments/accessories
specified by the manufacturer.
12. Use only with the cart,
stand, tripod, bracket,
or table specified by
the manufacturer, or
sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during lightning
storms or when unused for long periods
of time.
14. Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as when the power-supply
cord or plug is damaged, liquid has
been spilled or objects have fallen into
the apparatus, the apparatus has been
exposed to rain or moisture, does not
operate normally, or has been dropped.
Disc Storage & Management
• Holding Discs
- Fingerprints or scratches
on a disc may reduce
sound and picture quality
or cause skipping
- Avoid touching the surface of a disc
where data has been recorded.
- Hold the disc by the edges so that
fingerprints will not get on the surface.
- Do not stick paper or tape on the disc.
• Cleaning Discs
- If you get fingerprints or
dirt on a disc, clean it with
a mild detergent diluted in
water and wipe with a soft
cloth.
- When cleaning, wipe gently from the
inside to the outside of the disc.
• Disc Storage
`
Do not keep in direct sunlight.
`
Keep in a cool ventilated area.
`
Keep in a clean protection jacket and
store vertically.
Handling Cautions
• Do not expose this apparatus to dripping
or splashing. Do not put objects filled with
liquids, such as vases on the apparatus.
• To turn this apparatus off completely, you
must pull the power plug out of the wall
socket. Consequently, the power plug must
be easily and readily accessible at all times.
• Do not plug multiple electric devices into
the same wall socket. Overloading a socket
can cause it to overheat, resulting in a fire.
• Maintenance of Cabinet.
- Before connecting other components to
this player, be sure to turn them off.
- If you move your player suddenly
from a cold place to a warm place,
condensation may occur on the
operating parts and lens and cause
abnormal disc playback. If this occurs,
unplug the player, wait for two hours,
and then connect the plug to the power
outlet. Then, insert the disc, and try to
play back again.
• If the product makes an abnormal noise
or produces a burning smell or smoke,
turn off the power switch immediately and
disconnect the power plug from the wall
outlet. Then, contact the nearest customer
service centre for technical assistance. Do
not use the product. Using the product as
it is may cause a fire or an electric shock.
02229R-BD-E5500-XZ-ENG.indd 3 2012-04-20 오전 9:52:19
|
4 English
Safety Information
Using the 3D function
IMPORTANT HEALTH AND SAFETY
INFORMATION FOR 3D PICTURES.
Read and understand the following safety
information before using the 3D function.
• Some viewers may experience discomfort
while viewing 3D TV such as dizziness,
nausea, and headaches.
If you experience any such symptom,
stop viewing 3D TV, remove the 3D Active
Glasses, and rest.
• Watching 3D images for an extended
period of time may cause eye strain. If you
feel eye strain, stop viewing 3D TV, remove
your 3D Active Glasses, and rest.
• A responsible adult should frequently check
on children who are using the 3D function.
If there are any reports of tired eyes,
headaches, dizziness, or nausea, have the
child stop viewing 3D TV and rest.
• Do not use the 3D Active Glasses for other
purposes (Such as general eyeglasses,
sunglasses, protective goggles, etc.)
• Do not use the 3D function or 3D Active
Glasses while walking or moving around.
Using the 3D function or 3D Active Glasses
while moving around may cause you to
bump into objects, trip, and/or fall, and
cause serious injury.
• If you want to enjoy 3D content, connect
a 3D device (3D compliant AV receiver or
TV) to the player's HDMI OUT port using a
high-speed HDMI cable. Put on 3D glasses
before playing the 3D content.
• The player outputs 3D signals only through
HDMI cable connected to the HDMI OUT
port.
• As the video resolution in 3D play mode
is fixed according to the resolution of the
original 3D video, you can not change the
resolution to your preference.
• Some functions such as BD Wise, screen
size adjustment, and resolution adjustment
may not operate properly in 3D play mode.
• You must use a high-speed HDMI cable for
proper output of the 3D signal.
• Stay at least three times the width of the
screen from the TV when watching 3D
images. For example, if you have a 46-inch
screen, stay 138 inches (11.5 feet) from the
screen.
• Place the 3D video screen at eye level for
the best 3D picture.
• When the player is connected to some 3D
devices, the 3D effect may not function
properly.
• This player does not convert 2D content
into 3D.
• "Blu-ray 3D" and "Blu-ray 3D" logo are
trademarks of the Blu-ray Disc Association.
Copyright
© 2012 Samsung Electronics Co.,Ltd.
All rights reserved; No part or whole of this
user's manual may be reproduced or copied
without the prior written permission of
Samsung Electronics Co.,Ltd.
02229R-BD-E5500-XZ-ENG.indd 4 2012-04-20 오전 9:52:19
English 5
|
Contents
Contents
SAFETY INFORMATION
2 Warning
3 Precautions
3 Important Safety Instructions
3 Disc Storage & Management
3 Handling Cautions
4 Using the 3D function
4 Copyright
GETTING STARTED
6 Disc and Format Compatibility
6 Disc types and contents your player can
play
6 Disc types your player cannot play
7 Region Code
7 Logos of Discs the player can play
8 Supported Formats
9 Accessories
10 Front Panel
10 Rear Panel
11 Remote Control
11 Tour of the Remote Control
CONNECTIONS
12 Connecting to a TV
12 Connecting to an Audio System
12 Method 1 Connecting to an HDMI
supported AV receiver
12 Method 2 Connecting to an AV receiver
with Dolby Digital or DTS decoder
13 Connecting to a Network Router
13 Wired Network
13 Wireless Network
SETTINGS
14 The Initial Settings Procedure
14 The Home Screen
14 Accessing the Settings Screen
14 Buttons on the Remote Control Used for
the Settings Menu
15 Settings Menu Functions
18 Networks and the Internet
18 Configuring Your Network Connection
20 Upgrading Software
20 By Internet
20 By USB
20 By Disc
21 Via download
21 Download in Standby Mode
MEDIA PLAY
22 Insert a Disc
22 Insert a USB Device
22 My Contents
22 My Devices
23 Controlling Video Playback
23 Buttons on the Remote Control used for
Video Playback
23 Using the Tools Menu
24 Controlling Music Playback
24 Buttons on the Remote Control used for
Music Playback
24 Repeat an Audio CD (CD-DA)/MP3
24 Playlist
24 Playing Photo Contents
24 Using the Tools Menu
NETWORK SERVICES
25 Using Smart Hub
25 Smart Hub at a Glance
25 BD-LIVE™
26 Using the AllShare Network Function
26 To Download the AllShare Software
26 Playing Content Located on Your PC or
DLNA Device through the Blu-ray Disc
Player
APPENDIX
27 Compliance and Compatibility Notice
27 Copy Protection
28 Network Service Disclaimer
28 Licence
29 Additional Information
29 Note
31 Resolution according to the contents type
32 Digital Output Selection
33 Troubleshooting
34 Repairs
35 Specifications
02229R-BD-E5500-XZ-ENG.indd 5 2012-04-20 오전 9:52:19
|
6 English
Getting Started
Disc and Format Compatibility
Disc types and contents your player can play
Media Disc Type Details
VIDEO
Blu-ray Disc
3D Blu-ray Disc
BD-ROM or BD-RE/-R recorded in the BD-RE format.
DVD-VIDEO
DVD-RW
DVD-R
DVD+RW
DVD+R
DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R that have
been recorded and finalized, or a USB storage media containing DivX,
MKV, MP4 contents.
MUSIC
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB
storage media containing MP3 or WMA contents.
PHOTO
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB
storage media containing JPEG contents.
| NOTE |
\
The player may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.
\
If a DVD-RW/-R has not been recorded properly in DVD video format, it will not be playable.
\
Your player will not play content that has been recorded on a DVD-R at a bit-rate that exceeds 10 Mbps.
\
Your player will not play content that has been recorded on a BD-R or USB device at a bit rate that exceeds 25
Mbps.
\
Playback may not work for some types of discs, or when you use specific functions, such as angle change and
aspect ratio adjustment. Information about the discs is written in detail on the disc box. Please refer to this if
necessary.
\
When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.
Disc types your player cannot play
• HD DVD
• DVD-ROM/PD/
MV, etc
• DVD-RAM
• Super Audio CD
(except CD layer)
• DVD-RW(VR mode)
• CVD/CD-ROM/
CDV/CD-G/CD-I/LD
(CD-Gs play audio
only, not graphics.)
• 3.9 GB DVD-R for
Authoring.
| NOTE |
\
This player may not respond to all operating commands because some Blu-ray Discs, DVDs, and CDs allow
specific or limited operation and provide only certain features during playback.
Please note that this is not a defect in the player.
\
Samsung cannot guarantee that this player will play every disc bearing the Blu-ray Disc, DVD or CD logo
because disc formats evolve, and problems and errors may occur during the creation of Blu-ray Disc, DVD, and
CD software and/or the manufacture of discs.
\
Please contact the SAMSUNG Customer Care Centre if you have questions or encounter difficulty when playing
Blu-ray Disc, DVD, or CD in this player. Also, refer to rest of this user manual for additional information on
playback restrictions.
\
Some commercial discs and DVDs purchased outside your region may not play on this player.
02229R-BD-E5500-XZ-ENG.indd 6 2012-04-20 오전 9:52:19
English 7
|
02 Getting Started
Region Code
Both players and discs are coded by region.
These regional codes must match for a disc to play. If the codes do not match, the disc will not
play.
The Region Number for this player is displayed on the rear panel of the player.
Disc Type Region Code Area
Blu-ray Disc
A
North America, Central America, South America, Korea, Japan, Taiwan, Hong
Kong and South East Asia.
B
Europe, Greenland, French territories, Middle East, Africa, Australia and New
Zealand.
C
India, China, Russia, Central and South Asia.
DVD-VIDEO
1
The U.S., U.S. territories and Canada
2
Europe, Japan, the Middle East, Egypt, South Africa, Greenland
3
Taiwan, Korea, the Philippines, Indonesia, Hong Kong
4
Mexico, South America, Central America, Australia, New Zealand, Pacific
Islands, Caribbean
5
Russia, Eastern Europe, India, most of Africa, North Korea, Mongolia
6
China
Logos of Discs the player can play
Blu-ray Disc 3D Blu-ray Disc BD-LIVE
DivX PAL broadcast System in U.K., France, Germany, etc.
02229R-BD-E5500-XZ-ENG.indd 7 2012-04-20 오전 9:52:22
|
8 English
Getting Started
Supported Formats
Video File Support
File
Extension
Container Video Codec Resolution
Frame rate
(fps)
Bit rate
(Mbps)
Audio Codec
*.avi
*.mkv
*.asf
*.wmv
*.mp4
*.3gp
*.vro
*.mpg
*.mpeg
*.ts
*.tp
*.trp
AVI
MKV
ASF
MP4
3GP
VRO
VOB
PS
TS
DivX 3.11/
4.x/5.x/6.1
1920x1080
6~30
20
Dolby Digital
LPCM
AAC
HE-AAC
WMA
MP3
DTS
MPEG4 SP/ASP
H.264 BP/
MP/HP
25
Window
Media Video v9
1920x1080
25
MPEG2
24/25/30
MPEG1 352x288
24/25/3 20
`
Limitations
- Even when a file is encoded by a supported codec listed above, the file might not be played
if its content is defective or corrupted.
- Normal playback is not guaranteed if the file's container information is wrong or the file itself
is corrupted.
- Files having higher bit or frame rates than standard may stutter when played back.
- The seek (skip) function is not available if the file's index table is damaged.
- When you playback a file remotely through a network connection, video playback may
stutter depending on the network speed.
- Some USB/Digital camera devices may not be compatible with the player.
`
Video decoder
- Supports up to H.264 Level 4.1
- Does not support GMC 2 or higher
`
Audio decoder
- Supports WMA 7, 8, 9 and STD
- Does not support WMA 9 PRO multi-channel or lossless audio if the number of channels is
more than 2.
- Does not support WMA sampling rate of 22050Hz mono.
`
Comments
- MPEG4 : Supports up to GMC 1-Warping Point.
- H.264 : Supports up to BP/MP/HP Level 4.1.
- WMV : Supports V9, VC1 SP/MP/AP L3.
- MPEG1 : Does not support D-picture.
- MPEG2 : Supports up to Hight Profile High Level.
Ğ
Supported DivX subtitle file formats
*.ttxt, *.smi, *.srt, *.sub, *.txt
| NOTE |
\
Some DivX, MKV and MP4 format discs may not play, depending on their video resolution and frame rate.
Music File Support
File Extension Container Audio Codec Support Range
*.mp3
MP3
MP3 -
*.wma
WMA
WMA
* Sampling rates (in kHz) - 8, 11, 16, 22, 32, 44.1, 48
* Bit rates - All bit rates in the range 5kbps to 384kbps.
02229R-BD-E5500-XZ-ENG.indd 8 2012-04-20 오전 9:52:22
English 9
|
02 Getting Started
Notes on the USB connection
• Your player supports USB storage media,
MP3 players, digital cameras, and USB
card readers.
• Some USB/digital camera devices may not
be compatible with the player.
• Your player supports the FAT16, FAT32,
and NTFS files systems.
• Connect USB devices directly to the
player's USB port. Connecting through
a USB cable may cause compatibility
problems.
• Inserting more than one memory device
into a multi-card reader may cause the
reader to operate improperly.
• The player does not support the PTP
protocol.
• Do not disconnect a USB device during a
"loading" process.
• The bigger the image resolution, the longer
the image takes to display.
• This player cannot play MP3 files with DRM
(Digital Rights Management) downloaded
from commercial sites.
• Your player only supports video that is
under 30fps (frame rate).
• Your player only supports USB Mass
Storage Class (MSC) devices such as
thumb drives and USB HDD. (HUB is not
supported.)
• Certain USB HDD Devices, multi-card
readers and thumb drives may not be
compatible with this player.
• If a USB device requires excessive power, it
may be limited by the circuit safety device.
• If playback from a USB HDD is unstable,
provide additional power by plugging the
HDD into a wall socket.
If the problem continues, contact the USB
HDD manufacturer.
• You must remove USB Storage devices
using the "Safely Remove USB" function
to prevent possible damage to the USB
memory.
Press the HOME button to move to the
home screen, press the YELLOW (C)
button, and then press the
v
button.
• SAMSUNG is not responsible for any data
file damage or data loss.
• Your player does not support NTSF
compressed files, sparse files, or encrypted
files.
- You can repair or format a USB device
on your Desktop PC. (MS-Windows OS
only)
AVCHD (Advanced Video Codec High
Definition)
• This player can play back AVCHD format
discs. These discs are normally recorded
and used in camcorders.
• The AVCHD format is a high definition
digital video camera format.
• The MPEG-4 AVC/H.264 format
compresses images with greater efficiency
than the conventional image compressing
format.
• Some AVCHD discs use the "x.v.Color" format. This player can play back AVCHD discs that
use "x.v.Color" format.
• "x.v.Color" is a trademark of Sony Corporation.
• "AVCHD" and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co., Ltd.
and Sony Corporation.
| NOTE |
\
Some AVCHD format discs may not play, depending on the recording conditions.
AVCHD format discs need to be finalized.
\
"x.v.Color" offers a wider colour range than normal DVD camcorder discs.
Accessories
Check for the supplied accessories below.
PANDORA
DIGITAL
SUBTITLE
INPUT
HOME
1
4
7
VOL+
2
5
8
0
VOL
3
6
9
HOME
A B C D
+
Batteries for Remote Control (AAA Size)
User Manual Remote Control
02229R-BD-E5500-XZ-ENG.indd 9 2012-04-20 오전 9:52:23
|
10 English
Getting Started
Front Panel
| NOTE |
\
To upgrade the player's software through the USB Host jack, you must use a USB memory stick.
\
When the player displays the Blu-ray Disc menu, you cannot start the movie by pressing the Play button on the
player or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press
the
v
button.
Rear Panel
LAN
HDMI OUT DIGITAL AUDIO OUT
DISPLAY USB HOST
REMOTE CONTROL SENSOR
DISC TRAY
POWER BUTTON
OPEN/CLOSE BUTTON
PLAY/PAUSE
BUTTON
02229R-BD-E5500-XZ-ENG.indd 10 2012-04-20 오전 9:52:24
English 11
|
02 Getting Started
Remote Control
Tour of the Remote Control
PANDORA
DIGITAL
SUBTITLE
INPUT
HOME
1
4
7
VOL+
2
5
8
0
VOL
3
6
9
HOME
A B C D
+
Press to open and close the disc tray.
After setup, allows you to select the input
source on your TV.
(This button only works with Samsung TVs.)
Turn the player on and off.
Return to the previous menu.
These buttons are used both for menus
on the player and also several Blu-ray Disc
functions.
Press numeric buttons to operate options.
Use to enter the disc menu.
Press to skip backwards or forwards.
Press to search backwards or forwards.
Use to access various audio functions on a
disc.
Press to use Smart Hub.
Press to stop a disc.
Press to move to the home menu.
Turn the TV on and off.
(This button only works with Samsung TVs.)
TV volume adjustment.
(This button only works with Samsung TVs.)
Press to pause a disc.
Press to play a disc.
Press to switch the Blu-ray Disc/DVD's
subtitle language.
Press to use the Tools menu.
Use to display the playback information.
Use to select menu items and change menu
values.
Press to exit the menu.
Use to enter the popup menu/title menu.
Press to use repeat function.
Press to use bonusview function. Press to use the full screen function.
Installing batteries
| NOTE |
\
If the remote does not operate properly:
-
Check the polarity +/– of the batteries.
-
Check if the batteries are drained.
-
Check if the remote sensor is blocked by obstacles.
-
Check if there is any fluorescent lighting nearby.
| CAUTION |
\
Dispose of batteries according to local environmental regulations. Do not put them in the household trash.
02229R-BD-E5500-XZ-ENG.indd 11 2012-04-20 오전 9:52:24
|
12 English
Connections
Connecting to a TV
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to
the HDMI IN jack on your TV.
- Do not connect the power cord to the wall outlet until you have made all the other
connections.
- When you change the connections, turn off all devices before you start.
| NOTE |
\
If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the Digital Audio Out
on the player to an audio system to hear audio.
\
An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.
\
Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your
TV.
\
When you connect the player to your TV using the HDMI cable or to a new TV, and then turn it on for the first
time, the player automatically sets the HDMI output resolution to the highest supported by the TV.
\
A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Colour to Off in the menu.
\
To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed (category 2) HDMI
cable.
\
HDMI outputs only a pure digital signal to the TV.
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the
screen.
Audio
Video
Connecting to an Audio System
You can connect the Blu-ray player to an the audio system using one of the methods illustrated
below.
- Do not connect the power cord to the wall outlet until you have made all the other
connections.
- When you change the connections, turn off all devices before you start.
Method 1 Connecting to an HDMI supported AV receiver
• Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product
to the HDMI IN jack on your receiver.
• Best quality (Recommended)
Method 2 Connecting to an AV receiver with Dolby Digital or DTS decoder
• Using a digital Coaxial cable (not supplied), connect the Coaxial Digital Audio Out jack on the
product to the Digital Coaxial In jack of the receiver.
• Good quality
• You will hear sound only through the front two speakers with Digital Output set to PCM.
AudioAudio
Method 2Method 1
02229R-BD-E5500-XZ-ENG.indd 12 2012-04-20 오전 9:52:24
English 13
|
03 Connections
Connecting to a Network
Router
You can connect your player to your network
router using one of the methods illustrated
below.
To use the AllShare network functionality, you
must connect your PC to your network as
shown in the illustrations.
The connection can be wired or wireless.
Wired Network
| NOTE |
\
Internet access to Samsung's software update
server may not be allowed, depending on the router
you use or your ISP's policy. For more information,
contact your ISP (Internet Service Provider).
\
DSL users, please use a router to make a network
connection.
Wireless Network
| NOTE |
\
Use only the Samsung wireless LAN adapter
with this player. (Model name:WIS12ABGNX).
Do not use this wireless adapter with any third-
party players.
To purchase the Samsung wireless LAN adapter,
visit your Samsung retailer.
Broadband
service
Broadband
service
Broadband modem
(with integrated router)
Broadband
modem
Router
Or
\
If your wireless router supports DHCP, this player
can use a DHCP or static IP address to connect to
the wireless network.
\
Set your wireless router to Infrastructure mode. Ad-
hoc mode is not supported.
\
The player supports only the following wireless
security key protocols:
-
WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),
WPA2-PSK (TKIP/AES)
\
Select a channel on the wireless router that is not
currently being used. If the channel set for the
wireless router is currently being used by another
device nearby, it will result in interference and
communication failure.
\
If you select the Pure High-throughput (Greenfield)
802.11n mode and set the Encryption type on your
router to WEP, TKIP or TKIP-AES (WPS2Mixed), the
player will not support a connection in compliance
with new Wi-Fi certification specifications.
\
Wireless LAN, by its nature, may cause interference,
depending on the operating conditions (router
performance, distance, obstacles, interference by
other radio devices, etc).
Broadband
service
Wireless Router
Wireless LAN
Adapter
(not included)
02229R-BD-E5500-XZ-ENG.indd 13 2012-04-20 오전 9:52:25
|
14 English
Settings
The Initial Settings Procedure
• The Home menu will not appear if you do not
configure the initial settings.
• The OSD (On Screen Display) may change in this
player after you upgrade the software version.
• The access steps may differ depending on the
menu you selected.
The Initial Settings Procedure lets you set
the OSD and menu languages, configure the
connection to your home network, choose
the aspect ratio output (screen size and
format) that is correct for your TV.
| NOTE |
\
If you skip Network Setup during the Initial Settings
procedure, you can configure your network settings
later. See "Configuring Your Network Connection"
on pages 18~19 for instructions.
\
If you want to display the Initial Settings screen
again and make changes, select Settings > System
> Initial Settings in the Home screen or select the
Reset option. (See page 16)
\
If you want to use an Anynet+(HDMI-CEC) function,
please follow the instructions below.
1) Connect the player to an Anynet+(HDMI-CEC)-
compliant Samsung TV using HDMI Cable.
2) Set the Anynet+(HDMI-CEC) feature to On in
both the TV and the player.
3) Set the TV to the Initial Settings Procedure.
`
Selecting an Option on the Home Screen
1. To select an option on the Home screen,
move the cursor using the ◄► buttons
until it highlights the option of your
choice, and then press the
v
button.
| NOTE |
\
If you leave the player in the stop mode for more
than 5 minutes without using it, a screen saver will
appear on your TV. If the player is left in the screen
saver mode for more than 20 minutes, the power
will automatically turn off.
Accessing the Settings Screen
1. Select Settings on the Home screen,
and then press the
v
button. The
Settings screen appears.
2. To access the Settings menus, sub-
menus, and options, please refer to the
remote control illustration and the table
to the right.
The Home Screen
1
My Contents : Lets you select contents
located on connected devices by type to view
or play: You can select videos, photos, or
music.
2
My Devices : Lets you select a connected
device to play or access. The device can be
the player itself, a device directly connected
to the player, such as a USB thumb drive, or
a device connected via your network, such
as a shared drive on your PC.
3
Smart Hub : Starts Smart Hub. From Smart
Hub, you can access YouTube, games, and
other apps.
4
Settings : Set various functions to suit your
personal preferences.
Buttons on the Remote Control
Used for the Settings Menu
1
HOME Button : Press to move to the Home
screen.
2
返回
Button : Return to the previous menu.
3
v
(Enter) / DIRECTION Buttons :
• Press ▲▼◄► to move the cursor or
select an item.
• Press the
v
button to activate the
currently selected item or confirm a
setting.
4
退出
Button : Press to exit the current menu.
Detailed Function Information
Each Settings function, menu item, and
individual option is explained in detail on-
screen. To view an explanation, use the
▲▼◄► buttons to select the function, menu
item, or option. The explanation will usually
appear on the right side of the screen.
A short description of each Settings function
starts on the next page. Additional information
on some of the functions is also in the
Appendix of this manual.
PANDORA
DIGITAL
SUBTITLE
INPUT
HOME
1
4
7
VOL
+
2
5
8
0
VOL
3
6
9
HOME
A B C D
+
1
2
4
3
SettingsSmart Hub
Videos
Photos
Music
My Devices
My Contents
42
1
3
Settings
3D Settings
TV Aspect : 16:9 Original
Smart Hub Screen Size : Size 2
BD Wise : On
Resolution : Auto
HDMI Colour Format : Auto
Movie Frame (24Fs) : Auto
HDMI Deep Colour : Auto
Display
Audio
Network
System
Language
Security
General
Support
02229R-BD-E5500-XZ-ENG.indd 14 2012-04-20 오전 9:52:25
English 15
|
04 Settings
Settings Menu Functions
Display
3D Settings
Select whether to play a Blu-ray Disc with 3D
contents in 3D Mode.
•
If you move to the Home or Smart Hub Home
screen while in 3D mode, the player will
switch to 2D automatically.
TV Aspect
Lets you adjust the output of the player to the
screen size and screen format of your TV.
Smart Hub Screen
Size
Lets you select the optimal size for the Smart
Hub Screen.
BD Wise
BD Wise is Samsung's latest inter-connectivity
feature.
When you connect a Samsung player and a
Samsung TV with BD Wise to each other via
HDMI, and BD Wise is on in both the player
and TV, the player outputs video at the video
resolution and frame rate of the Blu-ray Disc/
DVD.
Resolution
Set the output resolution of the HDMI video
signal to Auto, 1080p, 1080i, 720p or
576p/480p.
The number indicates the number of lines of
video per frame.
The i and p indicate interlaced and progressive
scan, respectively. Generally, the higher the
number of lines, the higher the picture quality.
HDMI Colour Format
Lets you set the colour space format for the
HDMI output so that it matches the capabilities
of the connected device (TV, monitor, etc). The
screen goes black momentarily after you have
selected a format.
Display
Movie Frame (24Fs)
If the player is connected to a 24Fs compatible
TV, setting the Movie Frame (24Fs) feature to
Auto lets the player adjust its HDMI output to 24
frames per second automatically for improved
picture quality.
•
You can enjoy the Movie Frame (24Fs) feature
only on a TV supporting this frame rate.
•
Movie Frame is only available when the
player is in the HDMI 1080i or 1080p output
resolution modes.
HDMI Deep Colour
Lets you set the product to output HDMI video
with Deep Colour. Deep Colour provides more
accurate colour reproduction with greater colour
depth.
Still Mode
Lets you set the type of picture the player
displays when you pause DVD playback.
Progressive Mode
Lets you improve picture quality when viewing
DVDs.
02229R-BD-E5500-XZ-ENG.indd 15 2012-04-20 오전 9:52:26
|
16 English
Settings
Audio
Digital Output
Lets you select the digital audio output format
that is suitable for your TV or AV Receiver. For
more details, see the digital output selection
table on page 32.
PCM Downsampling
Lets you choose to have 96Khz PCM signals
downsampled to 48Khz before they are
outputted to an amplifier. Choose On if your
amplifier or receiver is not compatible with a
96Khz signal.
Dynamic Range
Control
Lets you apply dynamic range control to Dolby
Digital, Dolby Digital Plus, and Dolby True HD
audio.
Auto : Automatically controls the dynamic
range of Dolby TrueHD audio, based on
information in the Dolby TrueHD soundtrack.
Also turns dynamic range control on for Dolby
Digital and Dolby Digital Plus.
Off : Leaves the dynamic range
uncompressed, letting you hear the original
sound.
On : Turns dynamic range control on for all
three Dolby formats. Quieter sounds are
made louder and the volume of loud sounds
is reduced.
Downmixing Mode
Lets you select the multi-channel downmix
method that is compatible with your stereo
system. You can choose to have the player
downmix to normal stereo or to surround
compatible stereo.
Network
Network Settings
Configure the network connection so you can
enjoy various features such as Internet services
or AllShare, and perform software upgrades.
Network Status
Lets you check the current network and Internet
status.
BD-Live Internet
Connection
Set to allow or prohibit an Internet connection
when you use the BD-LIVE service.
System
Initial Settings
You can set the language, Network Settings,
etc. by using the Initial Settings function.
Quick Start
Lets you set the player to turn on quickly by
decreasing the boot time.
| NOTE |
\
If this function set to On, Standby power
consumption will be increased.
Anynet+ (HDMI-CEC)
Anynet+ is a convenient function that offers
linked operations with other Samsung players
that have the Anynet+ feature and lets you
control those products with one Samsung TV
remote. To operate this function, you must
connect this player to an Anynet+ Samsung TV
using an HDMI cable.
BD Data
Management
Lets you manage the downloaded contents you
accessed through a Blu-ray Disc that supports
the BD-LIVE service.
Time Zone
You can specify the time zone that is applicable
to your area.
02229R-BD-E5500-XZ-ENG.indd 16 2012-04-20 오전 9:52:26
English 17
|
04 Settings
System
DivX® Video On
Demand
View DivX® VOD Registration Codes to
purchase and play DivX® VOD contents.
Reset
Resets all settings to their default settings except
for the network and Smart Hub settings.
The default security PIN is 0000.
Language
You can select the language you prefer for the Home menu, disc menu,
etc.
On-Screen Menu : Select the language for the on-screen displays.
Disc Menu : Select the language for the disc menu displays.
Audio : Select the language for the disc audio.
Subtitle : Select the language for the disc subtitles.
| NOTE |
\
The selected language will only appear if it is supported on the disc.
Security
The default PIN is 0000. Enter the default PIN to access the security
function if you haven't created your own password.
BD Parental Rating : Prevents playback of Blu-ray Discs with a rating
equal to or above a specific age rating unless you enter the security
PIN.
DVD Parental Rating : Prevents playback of DVDs with a rating above
a specific numerical rating unless you enter the security PIN.
Change Password : Change the 4-digit PIN used to access security
functions.
`
If you forgot your PIN:
1.
Remove any disc or USB storage device.
2.
Press and hold the
p
button on the front panel for 5 seconds or
more.
All settings will revert to the factory settings.
General
Network Remote
Control
The Network Remote Control function lets you
control your Blu-ray Disc player from a remote
device such as a smart phone through a wireless
connection to your local area network.
1.
Select On in the Network Remote Control
menu.
2.
Install the Samsung network remote
control application to control your player
on your compatible portable device.
3.
Make sure your portable device and your
player are connected to the same wireless
router.
4.
Start the application on your portable
device. The application should find your
player and display it on a list.
5.
Select the player.
6.
If this is the first time you are using the
function, it will ask you to allow or deny
remote control of the player. Select Allow.
7.
Follow the instructions that came with the
application to control the player.
Support
Software Upgrade
For more information about the Software
Upgrade function, see "Upgrading Software" on
pages 20~21.
Contact Samsung
Provides contact information for assistance with
your player.
02229R-BD-E5500-XZ-ENG.indd 17 2012-04-20 오전 9:52:26
|
18 English
Settings
Networks and the Internet
When you connect this player to a network,
you can use network based applications and
functions such as Smart Hub and BD-LIVE,
and upgrade the player's software through
the network connection. For more information
about accessing and using Internet services,
see the Network Services chapter of this
manual on pages 25~26. Instructions for
configuring the network connection start
below.
Configuring Your Network
Connection
Before you begin, contact your ISP to find out
if your IP address is static or dynamic. If it is
dynamic, and you have a wired or wireless
network, we recommend using the Automatic
configuration procedures described below.
If you are connecting to a wired network,
connect the player to your router using a
LAN cable before you start the configuration
procedure.
If you are connecting to a wireless network,
disconnect any wired network connection
before you begin.
To begin configuring your network connection,
follow these steps:
1. In the Home menu, select Settings, and
then press the
v
button.
2. Select Network, and then press the
v
button.
3. Select Network Settings, and then
press the
v
button.
The Network Settings screen appears.
Wired Network
Ğ
Wired - Automatic
To setup, follow steps 1 to 3 in "Configuring
Your Network Connection" on page 18.
1. Select Wired in the Network Settings
screen, and then press the
v
button.
The Network Status screen appears.
The player verifies the network
connection and then connects to the
network.
Ğ
Wired - Manual
If you have a static IP address or the
Automatic procedure does not work, you'll
need to set the Network Settings values
manually.
1. Select Wired in the Network Settings
screen, and then press the
v
button.
The Network Status screen appears.
The player attempts to verify the network
connection and fails.
2. Select IP Settings on the bottom of the
screen, and press the
v
button.
The IP Settings screen appears.
3. Select the IP Mode field, and then set it
to Manual.
4. Use the number keypad on your remote
to enter the Network values. Use the
▲▼◄► buttons on the remote to move
from entry field to entry field.
5. When done, highlight OK, and then
press the
v
button. The Network
Status screen appears. The player
verifies the network connection and then
connects to the network.
< Getting the IP Settings values >
You can view your Network Settings values
on most Windows computers. To view the
Network Settings values, follow these steps:
• Windows XP
1. Right click the Network icon on the
bottom right of the Windows desktop.
2. In the pop-up menu, click Status.
3. On the dialog that appears, click the
Support tab.
4. On the Support tab, click the Details
button.
The Network settings are displayed.
• Windows 7
1. Click the Network icon on the bottom
right of the Windows desktop.
2. In the pop-up menu, click Network and
Sharing Centre.
3. On the dialog that appears, click the
Local Area Connection or Wireless
Network Connection depending on your
network connection.
4. On the Support tab, click the Details
button.
The Network settings are displayed.
Settings
Display
Audio
Network
System
Language
Security
General
Support
Network Settings
>
Move
"
Enter
'
Return
Select a network connection type.
Wired
Wireless
(general)
WPS(PBC)
Connect to the network using a LAN cable. Please make
sure that the LAN cable is connected.
Settings
Display
Audio
Network
System
Language
Security
General
Support
Network Settings
a
Previous
<
Move
"
Enter
'
Return
MAC Address XX:XX:XX:XX:XX:XX
IP Address 0.0.0.0
Subnet Mask 0.0.0.0
Gateway 0.0.0.0
DNS Server 0.0.0.0
IP auto setting failed. Try the following to set up the IP automatically:
- Ensure that the DHCP server is enabled on the router, then restart router.
- Contact your Internet service provider for more information.
Alternatively, set up the IP manually by selecting IP Settings.
IP Settings Retry OK
02229R-BD-E5500-XZ-ENG.indd 18 2012-04-20 오전 9:52:26
English 19
|
04 Settings
| NOTE |
\
Depending on your Windows version, the
information may differ.
Wireless Network
You can setup a wireless network connection
in three ways:
- Wireless Automatic
- Wireless Manual
- WPS(PBC)
When you configure the wireless network
connection, any wireless network devices
currently connected through the player
or, if applicable, the player's current wired
connection, will be disconnected.
Ğ
Wireless (general) - Automatic
To setup, follow steps 1 to 3 in "Configuring
Your Network Connection" on page 18.
1. Select Wireless (general) in the
Network Settings screen, and then
press the
v
button.
The player searches for and then
displays a list of the available networks.
2. Select the desired network, and then
press the
v
button.
The Security screen appears.
3. On the Security screen, enter your
network's Security Code or Pass
Phrase.
Enter numbers directly using the number
buttons on your remote control. Enter
letters by selecting a letter with an
arrow button, and then pressing the
v
button.
4. When done, select Done at the bottom
of the screen, and then press the
v
button. The Network Status screen
appears. The player verifies the network
connection and then connects to the
network.
| NOTE |
\
You should be able to find the Security Code or
Pass Phrase on one of the set up screens you used
to set up your router or modem.
Ğ
Wireless (general) - Manual
If you have a static IP address or the
Automatic procedure does not work, you'll
need to set the Network Settings values
manually.
After following Steps 1 to 3 in "Configuring
Your Network Connection" on page 18.
1. Select Wireless (general) in the
Network Settings screen, and then
press the
v
button.
The Network Status screen appears.
The player attempts to verify the network
connection and fails.
2. Select IP Settings on the bottom of the
screen, and then press the
v
button.
The IP Settings screen appears.
3. Select the IP Mode field, and then set it
to Manual.
- For the IP setting values, see "Getting
the IP Settings values" on page 18.
4. Use the number keypad on your remote
to enter the Network values. Use the
▲▼◄► buttons on the remote to move
from entry field to entry field.
5. When done, highlight OK, and then
press the
v
button.
The Security screen appears.
6. On the Security screen, enter your
network's Security Code or Pass
Phrase.
Enter numbers directly using the number
buttons on your remote control. Enter
letters by selecting a letter with an
arrow button, and then pressing the
v
button.
7. When done, select Done at the bottom
of the screen, and then press the
v
button. The Network Status screen
appears. The player verifies the network
connection and then connects to the
network.
Ğ
WPS(PBC)
To setup, follow steps 1 to 3 in "Configuring
Your Network Connection" on page 18.
1. Select WPS(PBC) in the Network
Settings screen, and then press the
v
button.
The player searches for and then
displays a list of the available networks.
2. Press the WPS(PBC) button on your
router within two minutes. Your player
automatically acquires all the network
settings values it needs and connects
to your network. The Network Status
screen appears. The player connects
to the network after the network
connection is verified.
Settings
Display
Audio
Network
System
Language
Security
General
Support
Network Settings
a
Previous
m
Move
"
Enter
'
Return
1/11
Refresh
WEP
WPA
WPA
WPA
WEP
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
Select your wireless router from the list:
Settings
Display
Audio
Network
System
Language
Security
General
Support
Network Settings
a
Previous
<
Move
"
Enter
'
Return
MAC Address XX:XX:XX:XX:XX:XX
IP Address 0.0.0.0
Subnet Mask 0.0.0.0
Gateway 0.0.0.0
DNS Server 0.0.0.0
IP auto setting failed. Try the following to set up the IP automatically:
- Ensure that the DHCP server is enabled on the router, then restart router.
- Contact your Internet service provider for more information.
Alternatively, set up the IP manually by selecting IP Settings.
KT_WLAN
IP Settings Retry OK
02229R-BD-E5500-XZ-ENG.indd 19 2012-04-20 오전 9:52:26
|
20 English
Settings
Upgrading Software
The Software Upgrade menu allows you to
upgrade the player's software for performance
improvements or additional services.
• Never turn the player off or back on manually
during the update process.
1. In the Home screen, select Settings,
and then press the
v
button.
2. Select Support, and then press the
v
button.
3. Select Software Upgrade, and then
press the
v
button.
4. Select one of the following methods:
• By Internet
• By USB
• By Disc
• Via download
• Download in Standby Mode
5. Press the
v
button.
| NOTE |
\
The upgrade is complete when the player turns off,
and then turns on again by itself.
\
Samsung Electronics takes no legal responsibility
for player malfunction caused by an unstable
Internet connection or consumer negligence during
a software upgrade.
\
If you want to cancel the upgrade while the upgrade
software is downloading, press the
v
button.
\
When the system upgrade is progressing, "UP" is
displayed on the front panel.
By Internet
Your player must be connected to the Internet
to use the By Internet function.
1. Select By Internet, and then press the
v
button. The Connecting to Server
message appears.
2. If there is a download available, the
Download pop-up appears with a
progress bar and the download starts.
3. When the download is complete, the
Upgrade Query window appears with
three choices: Upgrade Now, Upgrade
Later, or Don't Upgrade.
4. If you select Upgrade Now, the player
upgrades the software, turns off, and
then turns on automatically.
5. If you do not make a selection in one
minute or select Upgrade Later, the
player stores the new upgrade software.
You can upgrade the software later
using the Via download function.
6. If you select Don't Upgrade, the player
cancels the upgrade.
By USB
1. Visit www.samsung.com.
2. Click SUPPORT on the top right of the
page.
3. Enter the product's model number into
the search field, and then click Find
Product.
4. Click Get downloads in the centre of
the page below the Downloads header.
5. Click Firmware in the centre of the
page.
6. Click the ZIP icon in the File column on
the right side of the page.
7. Click OK in the pop-up that appears to
download and save the firmware file to
your PC.
8. Unzip the zip archive to your computer.
You should have a single folder with the
same name as the zip file.
9. Copy the folder to a USB flash drive.
10. Make sure no disc is inserted in the
player, and then insert the USB flash
drive into the USB port of the player.
11. In the player's menu, go to Settings >
Support > Software Upgrade.
12. Select By USB.
| NOTE |
\
There should be no disc in the player when you
upgrade the software using the USB Host jack.
\
When the software upgrade is done, check the
software details in the software Upgrade menu.
\
Do not turn off the player during the software
upgrade.
It may cause the player to malfunction.
\
Software upgrades using the USB Host jack must
be performed with a USB flash memory stick only.
By Disc
1. Follow Steps 1 through 7 in By USB.
2. Unzip the zip archive to your computer.
You should have a single folder with the
same name as the zip file.
3. Write the folder onto a disc. We
recommend a CD-R or DVD-R.
4. Finalize the disc before you remove it
from your computer.
5. Insert the disc into the player.
6. In the player's menu, go to Settings >
Support > Software upgrade.
7. Select By Disc.
| NOTE |
\
When the system upgrade is done, check the
software details in the software Upgrade menu.
\
Do not turn off the player during the Software
Upgrade.
It may cause the player malfunction.
02229R-BD-E5500-XZ-ENG.indd 20 2012-04-20 오전 9:52:27
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72

Samsung BD-E5500 取扱説明書

カテゴリー
ブルーレイプレーヤー
タイプ
取扱説明書

他の言語で