RayRun xe50 ユーザーマニュアル

ブランド: RayRun

モデル: xe50

タイプ: ユーザーマニュアル

RayRun xe50は、消費電力がDC 6～24Vの定電圧LED製品を駆動するように設計されたLEDコントローラーです。Umi対応リモコンやスマートフォンアプリ（-AおよびTバージョン）で制御できます。

このコントローラーは、1から5チャンネルのアプリケーションをサポートしており、単色からRGB+CCTまで、さまざまな用途に使用できます。出力端子の機能は、アプリケーションによって異なります。

この製品の特徴は、以下の通りです。

5-in-1多機能モデル
リモコンとスマートフォンの両方との互換性
タイミング再生オプション
グループ/シーン機能

RayRun xe50は、照明の制御をより便利で直感的にする、多機能でユーザーフレンドリーなLEDコントローラーです。

この製品の特徴は、以下の通りです。

5-in-1多機能モデル
リモコンとスマートフォンの両方との互換性
タイミング再生オプション
グループ/シーン機能

RayRun xe50は、照明の制御をより便利で直感的にする、多機能でユーザーフレンドリーなLEDコントローラーです。

1. Power supply input

Connect to power supply. The controller can accept

supply voltage from DC 6V to 24V, the maximum cable

gauge is AWG12 or 2.5mm . The controller's output

voltage is at same level as the power input voltage,

please make sure the power supply voltage is correct

and the power is capable for the load wattage. The

power input '+' unit is directly connected to the output

terminal '+' unit inside the controller.

3. Work status indicator

This indicator shows all working status of the

controller. It displays different events as following:

Steady green: Normal working.

Short green blink: Command received.

Green blink for 3 times: Confirmation or

identification.

Single yellow flash : Edge of the content.

Red flash: Overload protection.

Yellow flash: Overheat protection.

Green blink: Timing play activated.

LED Controller

Umi Smart Wireless

This LED controller is designed to drive constant

voltage LED products in voltage range of DC 6-24V. It can

be controlled by the Umi compatible remote controllers

and Smartphone app (-A and T version). With advanced

BLE mesh technology, controllers can work

synchronously with a robust connection. Besides the

onboard press key operation, it also has timing play (-T

version) option featrues.

Introduction

Function & Size

Wiring

Please connect the controller output to LED loads

and power supply to the controller power input. The

power supply voltage must be same as the LED load's

rated voltage. Check all cables to be well connected

and insulated before power on.

Model: XE50 (-A/T)

5-in-1 Multi-function Model

Remote + Smartphone

Timing Play Option

Group / Scene

Full Protection

Push Terminal Multi-Function

BLE Mesh Remote + Phone

Group / Scene

2. Press key input

Connect to a normally open type press key switch if

local wired operation is needed. Three operation method

is available for the press key:

Single press: Turn on/off.

Double click: Change color or color temperature.

Hold press: Dimming.

4. LED output

Connect to LED loads. The LED loads must be

constant voltage driving type and compatible with PWM

modulation. For multi-channel models, the LED

connection need to be common anode. Please make

sure the LED rated voltage is same as the power supply

and each channel’s maximum load current is in range of

the controller's rated current.

To 110/230

AC power

6-24V DC output

Power supply

LED Controller

6-24V DC

1-5CH Constant voltage

LED Loads

Press key (-P model)

Umi Smart App

(-A/T version)

134mm

39mm

112mm

1 4

2* Picture for RGBW model

This model supports 1-5 channel application from

single color to RGB+CCT, please refer to following diagram

for multiple application output wiring.

CWWW

5 B 4 R 3 G 1 C

1-5CH OUTPUT

Green

Red

Blue

Cool White

Warm White

CWWW

5 B 4 R 3 G 1 C

1-5CH OUTPUT

Green

Red

Blue

No use

CWWW

5 B 4 R 3 G 1 C

1-5CH OUTPUT

White

RGB+CCT RGBW RGB

CCT Single Color

CWWW

5 B 4 R 3 G 1 C

1-5CH OUTPUT

No use

Cool White

Warm White

CWWW

5 B 4 R 3 G 1 C

1-5CH OUTPUT

Green

Red

Blue

White

Umi Remote

Controller

Advanced features

11. Protection feature

The controller has full protection function against

wrong wiring, load short circuit, overload and overheat.

The controller will stop working and the indicator will

flash with red / yellow color to indicate the malfunction.

The controller will try to recover from protection status

in a short time when the working condition is good.

For protection issues, please check the situation

with different indicator information:

Red flash: Check the output cables and load, make

sure no short circuit and the load current is in rated

range. Also the load must be constant voltage type.

Yellow flash: Check the installation environment,

make sure in a rated temperature range and with good

ventilation or heat dissipation condition.

Specification

10. Force turning on

The controller will restore to the last on/off status

on each power on as default. To force turning on the

controller at OFF status, user can connect and

disconnect the power of the controller for 3 times in a

short time. After this operation, the controller will be

reset to ON status.

App download link: (for -A & T version)

8. Timing play function (-T model only)

A real time clock with backup power supply is

equipped with the -T version model. With this feature,

user can setup timing play function with multiple

repeating features of weekday or date from the Umi

Smart app.

The real time clock will set the time with smart

phone once connected to the app. The built-in backup

power will reserve the timing play setting up to 48

hours after power cut. The saved timing play function

will be invalid after the backup power runs out and it

will automatically recover once being connected to

smart phone again. For more timing play features,

please check the Umi Smart app.

Model

XE50-1

XE50-2

XE50-3

XE50-4

XE50-5

Function

Single

color

CCT

RGB

RGBW

RGB+CCT

Working voltage

DC 6-24V

Rated output current

(at 1KHz PWM freq.)

Max 8A for each channel, total max 24A

* output current need to be derated up to 50% when PWM

frequency is higher than 4Khz.

Wireless connection

Umi protocol based on SIG BLE mesh

Smartphone app support

Yes, -A & T version

Timing play function

Yes, with backup battery. -T version

Communication distance

>20 meters at open area

Output mode

PWM constant voltage

PWM frequency

498Hz - 6.3KHz adjustable

Dynamic effects

Overload protection

Yes

Overheat protection

Yes

Working temperature (Ta)

-20°C~+55°C

Dimension

134x39x24mm

7. Change model function

For -A and -T version controller, the function can be

changed from 1 channel (single color) to 5 channels

(RGB+CCT) by Umi Smart app.

To change the model function, please use the Umi

Smart app and detect factory default devices in ‘Discover

nearby’ function and then tap the item icon and select

‘change function’ menu to proceed.

9. Change PWM frequency to avoid noise and flicker

In some LED application, noise or flicker issue may

occur at the default or low PWM frequency. The

controller’s PWM frequency can be changed via the Umi

Smart app. The frequency must be tuned with LED type

and installation. To maintain more stable working and

less power loss, please do not set to high frequency if no

noise or flicker issues occurred.

To change the PWM frequency, please use the Umi

Smart app and detect factory default devices in ‘Discover

nearby’ function and then tap the item icon and select

‘change setting’ menu to proceed.

CAUTION: The controller’s efficiency will drop versus

increased frequency and the output current

needs to be derated maximum 50% with frequency

higher than 4KHz. Otherwise the controller may run into

overheat protection from excess heat.

5. Pairing remote controllers

Operation

The controller can be paired with compatible Umi

remote controller for remote operation. To pair or unpair

the remote controller, user needs to connect and

disconnect the power of controller and press specific

combo keys on the remote controller. Each controller

can be paired up to 5 remote controllers. Please refer to

the remote controller's user's manual for detailed

operation.

6. Control by smartphone

For -A and -T version controller, besides Umi wireless

remote controllers, user can also control it by smartphone

with ‘Umi Smart’ app. Please scan the QR code on the

controller to find the app.

User can operate the controller from remote and/or

Umi Smart app. The working status and group/scene

setting will be synchronized.

该LED控制器⽤于驱动电压范围为DC6-24V的恒

压LED产品。⽤⼾可以通过Umi兼容的遥控器或智能

⼿机App（-A或-T版本）进⾏控制。基于先进的蓝⽛⾃组

⽹技术，控制器之间可以形成稳定可靠的⽆线连接并实

现多机同步功能。本机还可以通过有线按键进⾏操作，

同时还具备完善的定时播放功能（-T版本）。

型号:XE50(-A/T)

5合1功能

连接到LED灯具。LED灯具必须为恒压型且适⽤于

PWM驱动。对于多通道应⽤，各通道需为共阳极连接⽅

式。请确保LED的额定电压与电源相同，并且每个通道

的最⼤负载电流在控制器的额定电流范围内。

134mm

39mm

112mm

1 4

CWWW

5 B 4 R 3 G 1 C

1-5CH OUTPUT

绿

红

蓝

冷⽩

暖⽩

CWWW

5 B 4 R 3 G 1 C

1-5CH OUTPUT

CWWW

5 B 4 R 3 G 1 C

1-5CH OUTPUT

CWWW

5 B 4 R 3 G 1 C

1-5CH OUTPUT

⽩

RGB+CCT RGBW RGB

双⾊温单⾊

CWWW

5 B 4 R 3 G 1 C

1-5CH OUTPUT

N/A

冷⽩

暖⽩

Umi智能⽆线

5合1多功能型号

遥控器+智能手机

可选时控功能

群组/场景

全功能保护蓝牙自组网遥控+手机

按压式端子群组/场景

简介

功能和尺⼨

1.电源输⼊

4.LED输出

接线⽅法

绿

红

蓝

⽩

绿

红

蓝

N/A

LED控制器

⽩

连接到电源。控制器可接受直流6V⾄24V的供电

电压，端⼦可安装的最⼤电缆规格为2.5mm 。控制器

的输出电平与电源输⼊电压相同，安装前请确保电源

电压正确且功率储备满⾜控制器和负载的需求。请注

意电源输⼊的“+”极与输出端⼦的“+”极在控制器内

部直接相连。

该指⽰灯显⽰控制器的⼯作状态，指⽰灯的闪烁⽅

式与⼯作状态的对应关系如下：

绿⾊常亮：正常⼯作

绿⾊单闪：收到命令

绿灯慢闪3次：变更设置或设备识别

⻩⾊单闪：已调⾄最⾼或最低

红⾊闪烁：过载保护

⻩⾊闪烁：过热保护

绿⾊短时快闪：已开启定时播放功能（-T版本）

连接到常开型按键开关，⽤于开关和调光操作。

按键开关有三种操作⽅式：

单按：切换开关状态

快速双按：调节颜⾊或⾊温

⻓按：调节亮度

2.按键控制输⼊

3.⼯作状态指⽰灯

请将控制器输出连接到合适的恒压LED灯具，并

将电源连接到控制器电源输⼊端⼦。电源电压必须与

LED负载的额定电压相同。在通电前请检查所有电缆

是否连接良好并已可靠绝缘。

6-24V直流电源

6-24V DC

接交流电 LED控制器

1-5路LED

恒压灯具

按键开关

UmiSmartApp

(-A或-T版本)

Umi遥控器

本机⽀持从单⾊到RGB+CCT的应⽤，在不同应⽤下

输出端⼦的功能定义如下：

⾼级功能

11. 保护功能

规格

10.强制开启

控制器将在每次通电时会恢复到上次的开/关状

态。要把通电后在‘关’的状态的控制器强制开启，⽤

⼾需要在短时间内连接和断开控制器电源3次，即可

将控制器强制开启。

扫码下载APP:(仅限-A和-T版本)

8. 可断电保持的定时播放功能（仅限-T机型）

XE50-T机型配备了带后备电源的实时钟功能。⽤

⼾可以通过UmiSmart应⽤设置可编辑⽇期、时间和

灯具状态的定时播放功能。

本机的时钟在连接到⼿机后会⾃动校准，控制器

的后备电源可以确保在断电48⼩时内仍准确保留定时

播放设置。在断电且后备电源⽤尽的情况下定时播放

功能会暂时失效，在控制器再次连接⼿机后即可⾃动

恢复。

型号

XE50-1

XE50-2

XE50-3

XE50-4

XE50-5

功能

单⾊

冷暖⽩

RGB

RGBW

RGB+CCT

⼯作电压

DC6-24V

额定输出电流

(在1KHzPWM下)

每通道最⼤8A,总和最⼤24A

*当PWM频率⾼于4Khz时，输出电流需要最多降额50%。

⽆线协议

Umi协议，基于SIGBLEmesh

智能⼿机控制

⽀持,仅限-A&T版

按键输⼊功能

⽀持

时控功能

⽀持，带备⽤电池（-T版本）。

⽆线⼯作距离

开阔地带>20⽶

输出模式

PWM恒压模式

PWM频率

498Hz-6.3KHz可调

动态效果种类

过载保护

⽀持

过热保护

⽀持

⼯作环境温度(Ta)

-20°C~+55°C

尺⼨

134x39x24mm

7.变更机型功能

对于-A和-T版控制器，可以通过UmiSmartapp更

改控制器功能，以实现从单⾊到RGB+CTT的各种应⽤

模式。如需更改机型功能，请使⽤UmiSmartapp并在

“发现附近”功能中搜索未配置的设备，然后点击产品

图标并选择“更改功能”，然后选择需变更到的机型。

9.更改PWM频率以避免噪⾳和频闪

5. 遥控器配对

操作⽅法

控制器可与兼容的Umi遥控器配对进⾏操作。要对

遥控器进⾏配对或取消配对，⽤⼾需要连接和断开控制

器的电源或者在app上激活配对模式，然后按遥控器上

的特定组合键。具体⽅法请参考遥控器使⽤说明书。每

个控制器最多可配对5个遥控器。

6. 通过智能⼿机操控

对于-A版与-T版控制器，除了使⽤⽆线遥控器外，

还可以同时通过UmiSmartApp进⾏控制。

⽤⼾可以仅使⽤遥控器、仅使⽤app或者同时使⽤

遥控器和app进⾏操作。控制器的⼯作状态、分组状态

和场景模式在遥控器和app上可以实现同步。请扫描机

⾝上的⼆维码或者在各⼤应⽤市场搜索“UmiSmart”

来安装App。

本产品具有完善的保护功能，可以最⼤程度的防⽌

因接线错误、负载短路、过载或过热⽽引起的产品损

坏。当发⽣以上异常状态时控制器将停⽌⼯作，同时指

⽰灯会闪烁红⾊或⻩⾊。当⼯作状态良好时，控制器会

尝试恢复正常⼯作。

当控制器停⽌⼯作时，请检查指⽰灯的状态，在不

同的闪烁状态下应检查相应的故障：

红⾊闪烁：请检查输出电缆是否短路、负载电流是

否过⾼，并且请确保所驱动灯具为恒压驱动类型。

⻩⾊闪烁：请检查控制器的安装环境以及负载功

率，并确保控制器散热条件良好且负载功率在额定范

围之内。

在某些应⽤中，灯具可能会因PWM驱动⽅式出现

噪⾳或频闪问题，本机可以通过调整PWM频率来优化

这类问题。提⾼PWM频率后控制器的⼯作效率会有所

下降，某些灯具可能⽆法正常⼯作。因此为保证系统⼯

作更加稳定，请尽量设置到较低的PWM频率。

要更改PWM频率，请使⽤UmiSmartApp在“发现

附近”功能中点击未配置的设备，然后选择“更改设置”

菜单进⾏配置。

注意：在PWM频率升⾼时，控制器的发热量会相应

增加，在频率⾼于4KHz时，根据应⽤条件控制器的输

出电流最多需降额约50%，以避免发⽣过热。

RayRun xe50 ユーザーマニュアル

ブランド: RayRun

モデル: xe50

タイプ: ユーザーマニュアル

この製品の特徴は、以下の通りです。

5-in-1多機能モデル
リモコンとスマートフォンの両方との互換性
タイミング再生オプション
グループ/シーン機能

RayRun xe50は、照明の制御をより便利で直感的にする、多機能でユーザーフレンドリーなLEDコントローラーです。

PDFをダウンロードします

報告

他の言語で

English: RayRun xe50 User manual

RayRun xe50 ユーザーマニュアル

RayRun xe50 ユーザーマニュアル

他の言語で

関連論文

その他のドキュメント