dji T Series Spreading System ユーザーガイド

2020.03

v1.0

使用说明

User Guide

T Series Spreading System

Disclaimer

Carefully read this entire document and all safe and lawful practices provided by DJITM before using this product

for the rst time. Failure to read and follow instructions and warnings may result in serious injury to yourself

or others, damage to your DJI product, or damage to other objects in the vicinity. By using this product, you

hereby signify that you have read this disclaimer carefully and that you understand and agree to abide by the

terms and conditions herein. You agree that you are solely responsible for your own conduct while using this

product, and for any consequences thereof. DJI accepts no liability for damage, injury, or any legal responsibility

incurred directly or indirectly from the use of this product.

DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. and its aliated companies. Names of products, brands,

etc., appearing in this document are trademarks or registered trademarks of their respective owner companies. This

reproduced in any form without the prior written consent of or authorization from DJI.

This disclaimer is available in various languages. In the event of divergence among different versions, the

English version shall prevail. The nal interpretation of this document and all related documents of this product

belongs to DJI. This content is subject to change without prior notice. For up to date product information, visit

http://www.dji.com and click on the product page for this product.

Warnings

1. The T Series Spreading System (abbreviated as Spreading System) is only compatible with the DJI AGRASTM T

series aircraft, and the rmware of the aircraft must be the correct version for supporting the Spreading System.

Refer to the Specifications section for more information about compatible aircraft. DO NOT use it with other

products or for purposes other than agriculture.

2. The Spreading System is compatible with dry materials of a diameter between 0.5 - 5 mm. DO NOT use with

other materials. If used with other materials, the operating performance will be negatively affected and the

Spreading System may be damaged. All materials must be used in strict accordance with the instructions for

those materials.

3. The max internal spread tank load depends on the takeo weight of the aircraft. DO NOT overload. Refer to the

Specications section for more information.

4. When connecting the cables, make sure the connection is correct and secure. Operate with caution to avoid

damaging the cables.

5. Make sure that the hopper gate and spinner disk function normally before each use.

6. Operate with caution to avoid injury caused by mechanical parts.

7. When spreading is in progress, maintain a safe distance from the Spreading System to avoid injury.

8. When spreading is in progress, the minimum detection distance of the radar module will be 5 m instead of

1.5 m due to obstruction from the materials being spread. Note that the aircraft cannot sense obstacles that

are not within the detection range. The detection performance of the radar module will also decrease. Fly

with caution. Refer to the disclaimer and safety guidelines of the corresponding aircraft you are operating for

more information on the radar module.

9. DO NOT use liquids to rinse the Spreading System. It is recommended to use dry compressed air as a cleaning agent.

Introduction

The T Series Spreading System is compatible with Agras T series aircraft and oers ecient, reliable, and stable

spreading operations. The material delivery system is precisely controlled by the built-in stirring device and hopper

Spreading System × 1 Spare Spinner Disk × 2 M4×12 Screws × 2

Users have the option to

purchase a fender with a

screw pack to use with the

Spreading System 2.0.

gate, which can prevent material blockages and improve operating accuracy and reliability.

Use the app compatible with your aircraft to set parameters such as the hopper outlet size and spinner disk rotating

speed. These parameters can be adjusted to meet dierent requirements. The app provides warning prompts for an

empty tank as well as for abnormalities in the rotating speed, temperature, and hopper outlet size. These prompts

help ensure system safety.

The Spreading System has two versions, 1.0 and 2.0. They each have a dierent structure for the spinner disk.

Compared with the Spreading System 1.0, the Spreading System 2.0 has a higher material delivery rate and can

spread materials 360° around the aircraft. Unless otherwise specied, the descriptions in this document use the

Spreading System 1.0 as an example.

In the Box

Overview

Spread Tank

Spreader

Spinner Disk

Spreader Lock

Cable

Installation

Make sure to remove the Intelligent Flight Battery from the aircraft before installation. Hex keys for M2.5, M3

and M4 screws are required for installation.

1. Lift and remove the spray tank on the aircraft.

2. Removeall of the rubber stoppers and ve M3×8 screws on the upper cover on the front of the aircraft,

and then remove the upper cover. For the T20 aircraft, the cable strainer protector on the left must also be

removed.

3. Locate the EMF/Liquid Level port on the spray control board. Remove the M2.5×8 screws on the cable

connector, and then unplug the cable and place it in the space near the aircraft frame. The location and

structure of the spray control board are dierent on the T20 and T16. Refer to the gures below for more

information.

T20

4. Detach the spread tank and the spreader: Pull the spreader lock knob out, rotate it 90°, and release. Next,

rotate the spreader to detach it.

Locked Unlocked

T16

5. For the Spreading System 2.0, there is the option to mount the fender to the spreader. If mounted, the fender will

prevent materials from being spread to the rear of the aircraft.

5 cm

M3×8

6. Connect the Spreading System cable:

T20

Pass the cable through the space between the delivery pumps and spread tank mounting position. Secure the

cable to the cable strainer on the left of the aircraft, connect it to the EMF/Liquid Level port, and tighten the two

M2.5×8 screws.

M2.5×8

T16

a. Remove the M3×8 screws on both sides of the spray control board. Lift the board gently to make a space

between the board and the mounting position. DO NOT pull the cables connected on the board.

b. Pass the cable through the space between the delivery pumps and spread tank mounting position, then

through the space under the spray control board. Connect the cable to the EMF/Liquid Level port and

tighten the four M2.5×8 screws.

c. Remount the M3×8 screws on both sides of the spray control board.

7. Remount the cable strainer protector (for T20 only) and the upper cover of the aircraft. Tighten the ve M3×8

screws and attach all of the rubber stoppers.

M2.5×8

9. Mounting the spreader:

a. Face the rear of the aircraft and check the spreader lock knob is in an unlocked position. Insert the spreader

with the knob located to the left of the circular indentation on the spread tank.

b. Rotate the spreader to mount it to the spread tank. To lock the spreader, pull the spreader lock knob out, rotate

it 90°, and release. Make sure that the spreader is locked in position.

8. Insert the spread tank in the aircraft. DO NOT insert it to the bottom of the aircraft frame. Make sure that the

middle of the tank is approximately 5 cm from the middle frame of the aircraft, as shown in the gure below.

5 cm

c. Secure the Spreading System cable to the landing gear using the Velcro on the cable.

10. Insert the spread tank to the bottom of the aircraft frame and make sure it is in position. Insert and tighten two

M4×12 screws to the rear of the tank.

Operate with caution to avoid injury caused by mechanical parts.

Usage

1. Rotate the cover to open, add compatible materials, and tighten the cover.

2. Power on the remote controller, and then power on the aircraft.

3. Enter Operation View in the app. The following descriptions use the DJI Agras app as an example.

4. Tap the hopper outlet size display on the left of the screen to set the hopper outlet size, spinner disk

rotating speed, ying speed, line spacing, height relative to the vegetation, and banked turning. Adjustable

parameters vary depending on the operation mode. Adjust the settings so that they are suitable for the

materials you are using and test to make sure the performance is as expected.

For the Spreading System 1.0, when measuring between 7.5 to 9 kg/ha of materials spread, it is

recommended to:

• Adjust the hopper outlet size so that the material delivery rate is 1 kg/min.

• Adjust the spinner disk rotating speed so that the spreading range is 4 to 6 meters.

• Set the ying speed to 4 m/s (ying speed setting is unavailable in Manual Operation Mode).

For the Spreading System 2.0, when measuring 45 kg/ha of materials spread, it is recommended to:

• Adjust the hopper outlet size so that the material delivery rate is 8 kg/min.

• Adjust the spinner disk rotating speed so that the spreading range is 5 to 7 meters.

• Set the ying speed to 5 m/s (ying speed setting is unavailable in Manual Operation Mode).

5. Enter the operation mode required for spreading. The operations of the Spreading System vary depending on the

operation mode.

Route Operation Mode

After starting an operation, the aircraft ascends to an altitude of 4 meters and the spinner disk spins. When the

aircraft reaches the route starting point, the hopper gate opens according to the set value and the aircraft ies along

the route and spreads material automatically. Spreading cannot be started or stopped manually.

The operation resumption function can be used during operation. Once the operation is paused, the hopper gate

closes automatically to stop spreading while the spinner disk is still spinning. After operation is resumed, the aircraft

returns to the breakpoint or projection point and continues spreading.

A-B Route Operation Mode

After the aircraft enters A-B Route Operation Mode, the spinner disk spins. When the aircraft reaches the rst turning

point, the hopper gate opens according to the set value and the aircraft ies along the route and spreads material

automatically. Spreading cannot be started or stopped manually.

The operation resumption function can be used during operation. Once the operation is paused, the hopper gate

closes automatically to stop spreading while the spinner disk is still spinning. After operation is resumed, the aircraft

returns to the breakpoint or projection point and continues spreading.

Manual Plus Operation Mode

Switch to M+ after the aircraft takes o. Press the Spray button on the remote controller to start the spinner

disk. The hopper gate opens according to the set value and the aircraft spreads material automatically once it

has begun ying.

Manual Operation Mode

Switch to M after the aircraft takes off. Use the Spray button on the remote controller to start or stop spreading.

In all operation modes except Manual Operation Mode:

• When the aircraft ies forward or backward, the hopper gate opens automatically to start spreading.

• When the aircraft ies left or right, the hopper gate closes automatically to stop spreading while the

spinner disk continues to spin.

Spreading System Calibration

When to Calibrate

The Spreading System has been calibrated before delivery. There is no need to calibrate before using for the rst

time. Calibration is required in any of the following cases:

• The hopper gate cannot fully open or close.

• The material delivery rate is dierent from the desired value.

• The app incorrectly displays empty tank warnings.

Calibration Procedure

In the app, enter Operation View. Tap , , then tap Calibration in Spreading System Settings. Wait until the app

indicates calibration is complete. If calibration fails, try again.

Maintenance

1. Clean the residue inside the spread tank and spreader regularly. It is recommended to use dry compressed

air and a clean, soft dry cloth. DO NOT rinse with liquids.

2. The spinner disk is a consumable part. If obvious signs of wear are noticeable, follow the steps below to

replace the spinner disk.

a. Make sure that the aircraft is powered o, and then unplug the Spreading System cable.

b. Detach the spreader.

c. Remove the nut, washer, four M3×8 screws, and spinner disk at the bottom of the spreader. Mount a new

spinner disk and secure it using the washers, M3×8 screws, and nut.

Spinner Disk

Washer

M3×8 Screws

Nut

d. Remount the spreader to the spread tank. Make sure that the spreader is locked in position.

Operate with caution to avoid injury caused by mechanical parts.

The content is subject to change without prior notice.

Download the latest version from

http://www.dji.com/t20

AGRAS and are trademarks of DJI.

Specications

Items Spreading System 1.0 Spreading System 2.0

Compatible Aircraft* Agras T16, T20

Spreader Weight 1.8 kg 2.1 kg (excluding fender)

Max Hopper Outlet Area 8.6 cm232.3 cm2

Compatible Material

Diameter 0.5 - 5 mm

Spread Tank Volume 20 L

Spread Tank Internal Load Using with the T16: 16 kg

Using with the T20: 20 kg (note: the internal load of Japan version of T20 is 16 kg)

Spreading Range

Varies according to material diameter, spinner disk rotating speed, hopper outlet

size, and ying altitude. For best operating performance, it is recommended to

adjust the corresponding variables to achieve a spreading range of 4 - 6 meters

(for Spreading System 1.0) or 5 - 7 meters (for Spreading System 2.0).

* The rmware of the aircraft must be the correct version for supporting the Spreading System. Check the

release notes of the corresponding aircraft on the ocial DJI website.

CHS

免责声明

使用本产品之前，请仔细阅读并遵循本文及大疆 TM 创新（DJITM）提供的所有安全指引，否则可能会给您和周

围的人带来伤害，损坏本产品或其它周围物品。一旦使用本产品，即视为您已经仔细阅读本文档，理解、认

可和接受本声明全部条款和内容。您承诺对使用本产品以及可能带来的后果负全部责任。大疆创新（DJI）对

于直接或间接使用本产品而造成的损坏、伤害以及任何法律责任不予负责。

DJI 是深圳市大疆创新科技有限公司及其关联公司的商标。本文出现的产品名称、品牌等，均为其所属公司的

本文档及本产品所有相关的文档最终解释权归大疆创新（DJI）所有。如有更新，恕不另行通知。请访问

www.dji.com 官方网站以获取最新的产品信息。

注意事项

1. T 系列播撒系统（简称“播撒系统”）仅适用于大疆农业 T系列植保无人飞机（具体机型见“规格参数”），

且需配合支持播撒系统的飞行器固件使用。切勿在其他产品上使用或用于农业植保以外的用途。

2. 播撒系统适合使用颗粒直径为 0.5 - 5 mm 的干燥物料。切勿使用其他物料，否则将影响作业效果，甚至损坏

播撒系统。使用时，严格按照物料本身的使用说明进行操作。

3. 播撒系统作业箱最大载重与飞行器起飞重量有关，详见“规格参数”。切勿超重使用。

4. 连接线材时，确保正确牢固，小心操作，以免损坏线材。

5. 每次使用前，检查仓门开合是否顺畅，播撒盘运转是否正常。

6. 使用时务必小心，谨防机械结构伤手。

7. 进行播撒作业时，务必远离播撒系统，以免造成人身伤害。

8. 进行播撒作业时，由于播撒颗粒的遮挡，雷达模块的最小检测距离将由 1.5 米变为 5米。如有障碍物处于探

测范围以外，则飞行器无法感知障碍物。同时，雷达模块的检测性能亦有所减弱，务必谨慎飞行。更多雷达

模块注意事项请参考对应飞行器的《免责声明和安全操作指引》。

9. 禁止水洗。建议使用干燥的压缩空气进行清洁。

简介

播撒系统是一款适用于大疆农业植保无人飞机的配件，将其安装至飞行器，可完成高效、可靠、稳定的播撒作业。

内置搅拌装置及落料口仓门控制结构，精准控制落料速率，并有效防止落料堵塞，提高作业准确度及可靠性。

用户可通过与飞行器配套使用的 App 设置仓口大小、播撒盘转速等，满足不同作业场景的使用需求。App 可提

示无料报警及转速、温度、仓口大小等参数异常报警，确保系统安全运行。

播撒系统分为 1.0 和2.0 版本，其播撒盘结构有所不同。与播撒系统 1.0 相比，播撒系统 2.0 具有更大的落料速率，

且可以在飞行器水平方向上 360°范围内播撒物料。若无特殊注明，本文均以播撒系统 1.0 为例进行说明。

物品清单

播撒系统 ×1备用播撒盘 ×2M4×12 螺丝 ×2

对于播撒系统 2.0，用户

还可选购挡板及螺丝包配

合使用。

CHS

部件名称

作业箱

播撒机

播撒盘

播撒机锁止旋钮

连接线

安装

安装前务必确保飞行器智能飞行电池已取下。安装时需自备适用于 M2.5、M3 和M4 螺丝的六角扳手。

1. 向上提起并取出飞行器的喷洒作业箱。

2. 移除飞行器前部上盖的所有胶塞及 5颗M3×8螺丝，然后移除上盖。对于 T20 飞行器，还需取下左侧（面

向机尾）的线卡保护盖。

3. 在喷洒板上找到“流量计 /液位计”接口，移除连接线接头上的 M2.5×8螺丝，然后拔下连接线，放置于靠

近机壳边缘的空位中。T20 与T16 的喷洒板位置及结构不同，详见下图。

T20

CHS

4. 分离播撒系统的作业箱与播撒机：向外拔出播撒机锁止旋钮，转动 90°后松开以解除锁定，然后转动播撒机

将其拆下。

6. 连接播撒系统连接线：

T20

将播撒系统连接线从液泵与作业箱安装位的空隙穿过，嵌入飞行器左侧的线卡，然后插入“流量计 /液位计”

接口，并拧紧 2颗M2.5×8螺丝。

锁止状态解锁状态

5. 对于播撒系统 2.0，用户可选择安装挡板至播撒机，安装挡板后播撒系统将不会向飞行器后方播撒物料。

5 cm

M3×8

T16

M2.5×8

CHS

8. 将播撒系统的作业箱插入飞行器，注意不要完全插入，作业箱中部与飞行器中框距离约 5 cm（如图）。

5 cm

T16

a. 移除喷洒板两侧的 M3×8螺丝，然后轻轻向上提起喷洒板，使其与安装位之间稍有空隙。注意不要扯到

喷洒板上已连接的线材。

b. 将播撒系统连接线从液泵与作业箱安装位的空隙以及喷洒板下方的空隙中依次穿过，然后插入“流量计 /

液位计”接口，并拧紧 4颗M2.5×8螺丝。

c. 重新安装喷洒板两侧的 M3×8螺丝。

7. 重新安装线卡保护盖（仅 T20）及飞行器上盖，拧紧 5颗M3×8螺丝，装好所有胶塞。

M2.5×8

CHS

9. 安装播撒机：

a. 面向飞行器尾部，确保播撒机锁止旋钮处于解锁状态，将旋钮位置偏向作业箱上圆形凹槽的左侧，然后向

上嵌入播撒机。

b. 转动播撒机将其安装至作业箱，然后向外拔出锁止旋钮，转动 90°后松开以锁定播撒机。务必确保播撒

机锁定到位。

c. 使用播撒系统连接线上的魔术贴将线材固定至起落架。

10. 将作业箱完全插入飞行器，确保安装到位，然后在作业箱后侧插入并拧紧 2颗M4×12 螺丝，将其固定。

务必小心操作，谨防机械结构伤手。

使用

1. 旋开作业箱盖子，加入适量物料，然后拧紧盖子。

2. 依次开启遥控器及飞行器。

3. 进入 App 作业界面。下文描述均以大疆农业 App 为例。

4. 点击屏幕左侧的仓口大小显示，进入播撒参数设置，可设置仓口大小、播撒盘转速、飞行速度、作业间距、

相对作业高度、协调转弯等。不同作业模式下可设置的参数有所不同。用户需自行根据所使用的物料调整各

参数并进行测试，以达到预期作业效果。

对于播撒系统 1.0，以物料亩用量 0.5 - 0.6 kg 为例，建议：

• 调节仓口大小使每分钟落料量为 1 kg；

• 调节播撒盘转速使播撒范围为 4 - 6 m；

• 设置飞行速度为 4 m/s（手动作业模式下飞行速度设置不生效）。

对于播撒系统 2.0，以物料亩用量 3 kg 为例，建议：

• 调节仓口大小使每分钟落料量为 8 kg；

CHS

• 调节播撒盘转速使播撒范围为 5 - 7 m；

• 设置飞行速度为 5 m/s（手动作业模式下飞行速度设置不生效）。

5. 按照飞行器使用方法进入所需作业模式进行播撒作业。播撒系统在不同作业模式下的运行方式略有不同。

航线作业模式

执行作业后，飞行器起飞上升至 4米高度，同时播撒盘开始转动。飞行器飞至航线起点时，仓门按照所设值开启，

飞行器沿航线飞行并播撒物料。用户不可手动开启或停止播撒。

作业时可使用作业恢复功能：作业暂停后，仓门关闭，播撒停止（播撒盘仍继续转动）；继续作业后，飞行器

飞回中断坐标点或投影点，然后自动继续播撒作业。

A-B 点作业模式

切换至 A-B 点作业模式后，播撒盘开始转动。飞行器飞至第一个节点时，仓门按照所设值开启，飞行器沿作业

路线飞行并播撒物料。用户不可手动开启或停止播撒。

作业时可使用作业恢复功能：作业暂停后，仓门关闭，播撒停止（播撒盘仍继续转动）；继续作业后，飞行器

飞回中断坐标点或投影点，然后自动继续播撒作业。

增强型手动作业模式

飞行器起飞后，切换至 M+ 作业模式。此时用户需短按一次遥控器喷洒按键（此时作为播撒按键使用）以使播

撒盘转动。飞行器开始飞行后，仓门按照所设值开启，并自动播撒物料。

手动作业模式

飞行器起飞后，切换至 M作业模式。用户可使用遥控器播撒按键手动开始或停止播撒。

除手动作业模式外，其他作业模式下：

• 飞行器前后飞行时仓门自动开启，进行播撒；

• 飞行器左右飞行时仓门自动关闭，停止播撒（播撒盘仍继续转动）。

播撒系统校准

需要校准的情况

播撒系统出厂时已完成校准，可直接使用。若使用时出现以下情况，则用户需自行校准：

• 仓门无法完全打开或关闭；

• 落料速率与预期值有偏差；

• App 误报无料报警。

校准步骤

进入 App 作业界面 > > ，在播撒系统设置中点击校准，然后等待校准完成。若校准失败，请重试。

维护保养

1. 定期清理作业箱及播撒机内的残渣。建议使用干燥的压缩空气吹气进行清理，并使用干净柔软的干布擦拭。

切勿水洗。

2. 播撒盘为易损耗部件，如存在明显磨损，请按如下步骤及时更换播撒盘：

a. 确保飞行器电源断开，然后断开播撒系统连接线。

b. 拆下播撒机。

c. 移除播撒机下方的螺母、垫片、4颗M3×8螺丝及播撒盘，然后安装新的播撒盘，装回垫片并拧紧

M3×8螺丝及螺母。

CHS

播撒盘

垫片

M3×8 螺丝

螺母

内容如有更新，恕不另行通知。

您可以在 DJI 官方网站查询最新版本

http://www.dji.com/t20

DJI 和是大疆创新的商标。

规格参数

参数播撒系统 1.0 播撒系统 2.0

适用飞行器 *大疆 T16、T20 植保无人飞机

播撒机重量 1.8 kg 2.1 kg（不含挡板）

最大仓门开口面积 8.6 cm232.3 cm2

适用物料颗粒直径 0.5 - 5 mm

播撒作业箱容积 20 L

播撒作业箱内部最大载重配合 T16 使用时：16 kg

配合 T20 使用时：20 kg（注意：日本版为 16 kg）

播撒范围

与物料颗粒直径、播撒盘转速、仓口大小、飞行高度等因素有关。建议用户调

整相关变量，使播撒范围处于 4 - 6 m（播撒系统 1.0）或 5 - 7 m（播撒系统 2.0），

以获得较好的作业效果

*需配合支持播撒系统的固件使用，请留意 DJI 官网对应机型的发布记录。

d. 重新安装播撒机至作业箱，并确保播撒机锁定到位。

务必小心操作，谨防机械结构伤手。

Compliance Information

FCC Compliance Notice

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) This device

must accept any interference received, including interference that may cause undesired

operation.

Any changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

EU Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that this

device is in compliance with the essential requirements and other relevant provisions of the

Directive 2014/30/EU.

A copy of the EU Declaration of Conformity is available online at www.dji.com/euro-

compliance

EU contact address: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany

Declaración de cumplimiento UE: SZ DJI TECHNOLOGY CO., LTD. por la presente

declara que este dispositivo cumple los requisitos básicos y el resto de provisiones

relevantes de la Directive 2014/30/EU.

Hay disponible online una copia de la Declaración de conformidad UE en www.dji.com/

euro-compliance

Dirección de contacto de la UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer,

Germany

EU-verklaring van overeenstemming: SZ DJI TECHNOLOGY CO., LTD. verklaart hierbij

dat dit apparaat voldoet aan de essentiële vereisten en andere relevante bepalingen van

Richtlijn 2014/30/EU.

De EU-verklaring van overeenstemming is online beschikbaar op www.dji.com/euro-

compliance

Contactadres EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany

Declaração de conformidade da UE: A SZ DJI TECHNOLOGY CO., LTD. declara, através

deste documento, que este dispositivo está em conformidade com os requisitos essenciais

e outras disposições relevantes da Diretiva 2014/30/EU.

Existe uma cópia da Declaração de conformidade da UE disponível online em www.dji.

com/euro-compliance

Endereço de contacto na UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany

Dichiarazione di conformità UE: SZ DJI TECHNOLOGY CO., LTD. dichiara che il presente

dispositivo è conforme ai requisiti essenziali e alle altre disposizioni rilevanti della direttiva

2014/30/EU.

Una copia della dichiarazione di conformità UE è disponibile online all'indirizzo Web www.

dji.com/euro-compliance

Indirizzo di contatto UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany

Déclaration de conformité UE : Par la présente, SZ DJI TECHNOLOGY CO., LTD déclare

que cet appareil est conforme aux principales exigences et autres clauses pertinentes de

la directive européenne 2014/30/EU.

Une copie de la déclaration de conformité UE est disponible sur le site www.dji.com/euro-

compliance

Adresse de contact pour l'UE : DJI GmbH, Industriestrasse 12, 97618, Niederlauer,

Germany

EU-Compliance: Hiermit erklärt SZ DJI TECHNOLOGY CO., LTD., dass dieses Gerät den

wesentlichen Anforderungen und anderen einschlägigen Bestimmungen der EU-Richtlinie

2014/30/EU entspricht.

Eine Kopie der EU-Konformitätserklärung finden Sie online auf www.dji.com/euro-

compliance.

Kontaktadresse innerhalb der EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer,

Germany

Декларация за съответствие на ЕС: SZ DJI Technology Co., Ltd. декларира, че това

устройство отговаря на основните изисквания и другите приложими разпоредби на

Директива 2014/30/ЕС.

Копие от Декларацията за съответствие на ЕС ще намерите онлайн на адрес www.dji.

com/euro-compliance

Адрес за контакт за ЕС: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Германия

Prohlášení o shodě pro EU: Společnost SZ DJI Technology Co., Ltd. tímto prohlašuje, že

tohle zařízení vyhovuje základním požadavkům a dalším příslušným ustanovením směrnice

2014/30/EU.

Kopie prohlášení o shodě pro EU je k dispozici on-line na webu www.dji.com/euro-

compliance

Kontaktní adresa v EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Německo

EU-overensstemmelseserklæring: SZ DJI Technology Co., Ltd. erklærer hermed, at denne

enhed er i overensstemmelse med de væsentlige krav og andre relevante bestemmelser i

direktiv 2014/30/EU.

Der er en kopi af EU-overensstemmelseserklæringen tilgængelig online på www.dji.com/

euro-compliance

EU-kontaktadresse: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Tyskland

Δήλωση Συμμόρφωσης ΕΕ: Η SZ DJI Technology Co., Ltd. δια του παρόντος δηλώνει ότι

η συσκευή αυτή συμμορφώνεται με τις βασικές απαιτήσεις και άλλες σχετικές διατάξεις της

Οδηγίας 2014/30/EΕ.

Αντίγραφο της Δήλωσης Συμμόρφωσης ΕΕ διατίθεται ηλεκτρονικά στη διεύθυνση www.dji.

com/euro-compliance

Διεύθυνση επικοινωνίας στην ΕΕ: DJI GmbH, Industriestrasse 12, 97618, Niederlauer,

Γερμανία

ELi vastavuskinnitus Käesolevaga teatab SZ DJI Technology Co., Ltd., et see seade on

kooskõlas direktiivi 2014/30/EL oluliste nõuete ja muude asjakohaste sätetega.

ELi vastavusdeklaratsiooni koopia on kättesaadav veebis aadressil www.dji.com/euro-

compliance

Kontaktaadress ELis: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Saksamaa

Pranešimas dėl atitikties ES reikalavimams Bendrovė „SZ DJI Technology Co., Ltd.“

tvirtina, kad šis prietaisas atitinka pagrindinius 2014/30/ES direktyvos reikalavimus ir kitas

susijusias nuostatas.

ES atitikties deklaracijos kopiją galite rasti adresu www.dji.com/euro-compliance

ES kontaktinis adresas: „DJI GmbH“, Industriestrasse 12, 97618, Niederlauer, Germany

(Vokietija)

ES atbilstības paziņojums: SZ DJI Technology Co., Ltd ar šo apliecina, ka šī ierīce atbilst

direktīvas 2014/30/ES pamatprasībām un pārējiem būtiskiem nosacījumiem.

ES atbilstības deklarācijas kopija pieejama tiešsaistē vietnē www.dji.com/euro-compliance

ES kontaktadrese: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Vācija

EU:n vaatimustenmukaisuusvakuutus: SZ DJI Technology Co., Ltd. ilmoittaa täten, että

tämä laite on direktiivin 2014/30/EU olennaisten vaatimusten ja sen muiden asiaankuuluvien

ehtojen mukainen.

Kopio EU:n vaatimustenmukaisuusvakuutuksesta on saatavana verkossa osoitteessa www.

dji.com/euro-compliance

Yhteystiedot EU:ssa: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany

RÁITEAS Comhlíonta an AE: Dearbhaíonn SZ DJI Technology Co., Ltd. leis seo go bhfuil

an gléas seo de réir na gceanglas riachtanach agus na bhforálacha ábhartha eile sa Treoir

2014/30/AE.

Tá coip de Dhearbhú Comhréireachta an AE ar fáil ar líne ag www.dji.com/euro-compliance

Seoladh teagmhála san AE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany

Dikjarazzjoni ta’ Konformità tal-UE: SZ DJI Technology Co., Ltd. hawnhekk tiddikjara li dan

l-apparat huwa konformi mar-rekwiżiti essenzjali u ma’ dispożizzjonijiet relevanti oħra tad-

Direttiva 2014/30/UE.

Kopja tad-Dikjarazzjoni ta’ Konformità tal-UE hija disponibbli onlajn s-sit www.dji.com/euro-

compliance

Indirizz ta’ kuntatt tal-UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, il-Ġermanja

Declarația UE de conformitate: Prin prezenta, SZ DJI Technology Co., Ltd. declară faptul

că acest dispozitiv este conform cu cerințele esențiale și celelalte prevederi relevante ale

Directivei 2014/30/UE.

Un exemplar al Declarației UE de conformitate este disponibil online, la adresa www.dji.

com/euro-compliance

Adresa de contact pentru UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer,

Germania

Izjava EU o skladnosti: Družba SZ DJI Technology Co., Ltd. izjavlja, da ta naprava ustreza

osnovnim zahtevam in drugim ustreznim določbam Direktive 2014/30/EU.

Kopija izjave EU o skladnosti je na voljo na spletu nawww.dji.com/euro-compliance

Kontaktni naslov EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Nemčija

EU Izjava o sukladnosti: Tvrtka SZ DJI Technology Co. Ltd. izjavljuje da je ovaj uređaj

izrađen u skladu s osnovnim zahtjevima i ostalim relevantnim odredbama Direktive 2014/30/

EU.

Kopija EU Izjave o sukladnosti dostupna je na mrežnoj stranici www.dji.com/euro-

compliance

Adresa EU kontakta: DJI GmbH, Industriestrasse 12 97618, Niederlauer, Njemačka

Vyhlásenie o zhode EÚ: SZ DJI Technology Co., Ltd. týmto vyhlasuje, že toto zariadenie

je v zhode so základnými požiadavkami a ďalšími relevantnými ustanoveniami smernice

2014/30/EÚ.

Kópia tohto Vyhlásenia o zhode EÚ je k dispozícii online na www.dji.com/euro-compliance

Kontaktná adresa v EÚ: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Nemecko

Deklaracja zgodności UE: Firma SZ DJI Technology Co., Ltd. niniejszym oświadcza, że

przedmiotowe urządzenie jest zgodne z zasadniczymi wymogami i innymi stosownymi

postanowieniami dyrektywy 2014/30/UE.

Kopię deklaracji zgodności UE można znaleźć w Internecie na stronie www.dji.com/euro-

compliance

Adres do kontaktu w UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Niemcy

EU megfelelőségi nyilatkozat: A DJI Technology Co., Ltd. ezúton megerősíti, hogy ez

az eszköz megfelel a 2014/30/EU Irányelv alapvető követelményeinek és más vonatkozó

rendelkezéseinek.

Az EU megfelelőségi nyilatkozat másolata elérhető a www.dji.com/euro-compliance oldalon

EU kapcsolati cím: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Németország

EU-försäkran om efterlevnad: SZ DJI Technology Co., Ltd. härmed förklarar att denna

enhet uppfyller de väsentliga kraven och andra relevanta bestämmelser i direktivet 2014/30/

EU.

En kopia av EU-försäkran om efterlevnad nns att tillgå online på adressen www.dji.com/

euro-compliance

Kontaktadress EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Tyskland

Yrlýsing um fylgni við reglur ESB: SZ DJI Technology Co., Ltd. lýsir hér með yr að þetta

tæki hlíti mikilvægum kröfum og öðrum viðeigandi ákvæðum tilskipunar 2014/30/ESB.

Nálgast má eintak af ESB-samræmisyrlýsingunni á netinu á www.dji.com/euro-compliance

Heimilisfang ESB-tengiliðar: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany

AB Uygunluk Beyanı: SZ DJI Technology Co., Ltd. bu belge ile bu cihazın temel

gerekliliklere ve 2014/30/EU sayılı Direktin diğer ilgili hükümlerine uygun olduğunu beyan

eder.

AB Uygunluk Beyanının bir kopyasına www.dji.com/euro-compliance adresinden çevrim içi

olarak ulaşılabilir

AB için iletişim adresi: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Almanya

Environmentally friendly disposal

Old electrical appliances must not be disposed of together with the residual

waste, but have to be disposed of separately. The disposal at the communal

collecting point via private persons is for free. The owner of old appliances

is responsible to bring the appliances to these collecting points or to similar

collection points. With this little personal effort, you contribute to recycle valuable

raw materials and the treatment of toxic substances.

Umweltfreundliche Entsorgung

Elektro-Altgeräte dürfen nicht mit gewöhnlichem Abfall entsorgt werden und müssen separat

entsorgt werden. Die Entsorgung an kommunalen Sammelstellen ist für Privatpersonen

kostenlos. Die Eigentümer der Altgeräte sind für den Transport zu den Sammelstellen

verantwortlich. Durch diesen geringen Aufwand können Sie zur Wiederverwertung von

wertvollen Rohmaterialien beitragen und dafür sorgen, dass umweltschädliche und giftige

Substanzen ordnungsgemäß unschädlich gemacht werden.

Tratamiento de residuos responsable con el medio ambiente

Los aparatos eléctricos viejos no pueden desecharse junto con los residuos orgánicos, sino

que deben ser desechados por separado. Existen puntos limpios donde los ciudadanos

pueden dejar estos aparatos gratis. El propietario de los aparatos viejos es responsable de

llevarlos a estos puntos limpios o similares puntos de recogida. Con este pequeño esfuerzo

estás contribuyendo a reciclar valiosas materias primas y al tratamiento de residuos tóxicos.

Mise au rebut écologique

Les appareils électriques usagés ne doivent pas être éliminés avec les déchets résiduels.

Ils doivent être éliminés séparément. La mise au rebut au point de collecte municipal par

部件名称

有害物质

铅

(Pb)

汞

(Hg)

镉

(Cd)

六价铬

(Cr+6)

多溴联苯

(PBB)

多溴二苯醚

(PBDE)

线路板 × ○ ○ ○ ○ ○

外壳 × ○ ○ ○ ○ ○

金属部件（铜合金） × ○ ○ ○ ○ ○

内部线材 × ○ ○ ○ ○ ○

其他配件 × ○ ○ ○ ○ ○

本表格依据 SJ/T 11364 的规定编制。

○：表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要求

以下。

×：表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 规定的限

量要求。

（产品符合欧盟 ROHS 指令环保要求）

l'intermédiaire de particuliers est gratuite. Il incombe au propriétaire des appareils usagés

de les apporter à ces points de collecte ou à des points de collecte similaires. Avec ce

petit effort personnel, vous contribuez au recyclage de matières premières précieuses et

au traitement des substances toxiques.

Smaltimento ecologico

I vecchi dispositivi elettrici non devono essere smaltiti insieme ai riuti residui, ma devono

essere smaltiti separatamente. Lo smaltimento da parte di soggetti privati presso i punti

di raccolta pubblici è gratis. È responsabilità del proprietario dei vecchi dispositivi portarli

presso tali punti di raccolta o punti di raccolta analoghi. Grazie a questo piccolo impegno

personale contribuirete al riciclo di materie prime preziose e al corretto trattamento di

sostanze tossiche.

Milieuvriendelijk afvoeren

Oude elektrische apparaten mogen niet worden weggegooid samen met het restafval, maar

moeten afzonderlijk worden afgevoerd. Afvoeren via het gemeentelijke inzamelpunt is gratis

voor particulieren. De eigenaar van oude toestellen is verantwoordelijk voor het inleveren

van de apparaten op deze of vergelijkbare inzamelpunten. Met deze kleine persoonlijke

inspanning lever je een bijdrage aan de recycling van waardevolle grondstoffen en de

verwerking van giftige stoffen.

Eliminação ecológica

Os aparelhos elétricos antigos não podem ser eliminados juntamente com os materiais

residuais. Têm de ser eliminados separadamente. A eliminação no ponto de recolha

público através de entidades particulares é gratuita. É da responsabilidade do proprietário

de aparelhos antigos levá-los a estes pontos de recolha ou a pontos de recolha

semelhantes. Com este pequeno esforço pessoal, contribui para a reciclagem de matérias-

primas úteis e para o tratamento de substâncias tóxicas.

Изхвърляне с оглед опазване на околната среда

Старите електрически уреди не трябва да се изхвърлят заедно с битовите отпадъци,

а отделно. Изхвърлянето в общинския пункт за събиране на отпадъци от частни лица

е безплатно. Собственикът на старите уреди е отговорен за пренасянето на уредите

до тези или до подобни събирателни пунктове. С това малко собствено усилие

допринасяте за рециклирането на ценни суровини и за обработката на токсични

вещества.

Ekologicky šetrná likvidace

Stará elektrická zařízení nesmějí být likvidována spolu se zbytkovým odpadem, ale musí

být likvidována samostatně. Likvidace na komunálních sběrných místech prostřednictvím

soukromých osob je bezplatná. Vlastník starých zařízení odpovídá za to, že je donese do

těchto sběrných míst nebo na obdobná sběrná místa. Tímto můžete přispět k recyklaci

hodnotných surovin a zpracování toxických látek.

Miljøvenlig bortskaelse

Gamle elektriske apparater må ikke bortskaffes sammen med restaffald, men

skal bortskaffes separat. Bortskaffelse på et fælles indsamlingssted er gratis for

privatpersoner. Ejere af gamle apparater er ansvarlige for at bringe apparater hen til disse

indsamlingssteder eller til lignende indsamlingssteder. Med denne lille personlige indsats

bidrager du til genanvendelse af værdifulde råvarer og behandlingen af giftige stoffer.

Απόρριψη φιλική προς το περιβάλλον

Οι παλιές ηλεκτρικές συσκευές δεν πρέπει να απορρίπτονται μαζί με τα υπολειμματικά

απόβλητα, αλλά ξεχωριστά. Η απόρριψη στο δημοτικό σημείο συλλογής μέσω ιδιωτών γίνεται

χωρίς χρέωση. Ο κάτοχος παλιών συσκευών είναι υπεύθυνος για τη μεταφορά των συσκευών

σε αυτά ή παρόμοια σημεία συλλογής. Μέσω της ατομικής σας προσπάθειας, συμβάλλετε

στην ανακύκλωση πολύτιμων πρώτων υλών και την επεξεργασία των τοξικών ουσιών.

Keskkonnasäästlik kasutuselt kõrvaldamine

Vanu elektriseadmeid ei tohi ära visata koos olmejäätmetega, vaid tuleb koguda ja

kasutuselt kõrvaldada eraldi. Kohaliku omavalitsuse elektroonikaromude kogumispunktis

on äraandmine eraisikutele tasuta. Vanade seadmete sellistesse või sarnastesse

kogumispunktidesse toimetamise eest vastutavad seadmete omanikud. Selle väikese

isikliku panusega aitate kaasa väärtusliku toorme ringlussevõtule ja mürgiste ainete

töötlemisele.

Utilizavimas nekenkiant aplinkai

Senų elektrinių prietaisų negalima išmesti kartu su buitinėmis atliekomis; juos būtina

utilizuoti atskirai. Tokių prietaisų utilizavimas per komunalinius atliekų surinkimo punktus

yra nemokamas. Elektrinių prietaisų savininkai utilizuojamus prietaisus privalo priduoti

į atitinkamus arba analogiškus atliekų surinkimo punktus. Tokiu būdu, įdėdami nedaug

pastangų, prisidėsite prie vertingų medžiagų perdirbimo ir aplinkos apsaugojimo nuo

toksinių medžiagų.

Videi draudzīga atkritumu likvidēšana

Vecas elektriskās ierīces nedrīkst likvidēt kopā ar pārējiem atkritumiem, bet tās jālikvidē

atsevišķi. Privātpersonām atkritumu likvidēšana komunālajā savākšanas punktā ir bez

maksas. Veco ierīču īpašnieks ir atbildīgs par ierīču nogādāšanu šajos savākšanas punktos

vai līdzīgos savākšanas punktos. Ar šīm nelielām personiskajām pūlēm jūs veicināt vērtīgu

izejmateriālu pārstrādi un toksisko vielu apstrādi.

Hävittäminen ympäristöystävällisesti

Vanhoja sähkölaitteita ei saa hävittää kaatopaikkajätteen mukana, vaan ne on hävitettävä

erikseen. Kunnalliseen keräyspisteeseen vieminen on yksityishenkilölle ilmaista. Vanhojen

laitteiden omistaja vastaa laitteiden toimittamisesta kyseisiin keräyspisteisiin tai vastaaviin.

Tällä vähäisellä henkilökohtaisella vaivalla edistät omalta osaltasi arvokkaiden raaka-

aineiden kierrätystä ja myrkyllisten aineiden käsittelyä.

Diúscairt neamhdhíobhálach don chomhshaol

Níor cheart seanghléasanna leictreacha a dhiúscairt leis an dramhaíl iarmharach, ach

caithfear iad a chur de láimh astu féin. Tá an diúscairt ag an ionad bailiúcháin pobail ag

daoine príobháideacha saor in aisce. Tá freagracht ar úinéir seanghléasanna na gléasanna

a thabhairt chuig na hionaid bhailiúcháin sin nó chuig ionaid bhailiúcháin den chineál

céanna. Le hiarracht bheag phearsanta mar sin, cuidíonn tú le hamhábhair luachmhara a

athchúrsáil agus le substaintí tocsaineacha a chóireáil

Rimi li jirrispetta l-ambjent

L-apparat elettriku qadim ma għandux jintrema imkien ma’ skart residwu, iżda għandu

jintrema b’mod separat. Ir-rimi l-post tal-ġbir komunali minn persuni privati huwa b’xejn.

Is-sit ta’ apparat qadim huwa responsabbli biex iġib l-apparat f’dawn il-postijiet tal-ġbir jew

f’postijiet tal-ġbir simili. B’dan l-isforz personali żgħir, inti tikkontribwixxi għar-riċiklaġġ ta’

materja prima prezzjuża u għat-trattament ta’ sustanzi tossiċi.

Eliminarea ecologică

Aparatele electrice vechi nu trebuie aruncate odată cu deșeurile reziduale, ci trebuie

eliminate separat. Eliminarea în cadrul punctului de colectare local de către persoane zice

este gratuită. Proprietarii de aparate vechi sunt responsabili pentru transportul acestora

la respectivele puncte de colectare sau la alte puncte de colectare similare. Prin acest

efort personal nesemnicativ, puteți contribui la reciclarea materiilor prime valoroase și la

tratarea substanțelor toxice.

Okolju prijazno odlaganje

Starih električnih aparatov ne smete odvreči skupaj z ostanki odpadkov, temveč ločeno.

Odlaganje na komunalnem zbirnem mestu je za zične osebe brezplačno. Lastnik starih

naprav je odgovoren, da jih pripelje do teh ali podobnih zbirnih mest. S tako malo osebnega

truda prispevate k recikliranju dragocenih surovin in obdelavi strupenih snovi.

Ekološko odlaganje

Stari električni uređaji ne smiju se odlagati zajedno s kućnim otpadom, već ih treba odlagati

odvojeno. Odlaganje na komunalnom sabirnom mjestu od strane privatnih osoba je

besplatno. Vlasnik starih uređaja dužan je donijeti uređaje do tih sabirnih mjesta ili sličnih

sabirnih mjesta. Ovim malim osobnim naporom doprinosite recikliranju vrijednih sirovina i

pravilnoj obradi otrovnih tvari.

Ekologická likvidácia

Staré elektrospotrebiče sa nesmú likvidovať spolu so zvyškovým odpadom, ale musia

sa zlikvidovať samostatne. Likvidácia v komunálnom zbernom mieste prostredníctvom

súkromných osôb je bezplatná. Majiteľ starých spotrebičov je zodpovedný za prinesenie

spotrebičov na tieto zberné miesta alebo na podobné zberné miesta. Týmto malým

osobným úsilím prispievate k recyklovaniu cenných surovín a spracovaniu toxických látok

Utylizacja przyjazna dla środowiska

Nie można usuwać starych urządzeń elektrycznych wraz z pozostałymi odpadami.

Wymagają one oddzielnej utylizacji. Utylizacja przez osoby prywatne w punkcie zbiórki

odpadów komunalnych jest darmowa. Właściciel starych urządzeń jest odpowiedzialny

za dostarczenie ich do takich lub podobnych punktów zbiórki. Zadając sobie tak niewielki

trud, przyczyniasz się do recyklingu cennych surowców i odpowiedniego postępowania z

substancjami toksycznymi.

Környezetbarát hulladékkezelés

A régi elektromos készülékeket nem szabad a nem szelektíven gyűjtött hulladékkal együtt

kidobni, hanem a hulladékkezelésüket elkülönítve kell végezni A közösségi gyűjtőpontokon

a magánszemélyek ingyenesen leadhatják ezeket. A régi készülékek tulajdonosai

felelnek azért, hogy e készülékeket ezekre a gyűjtőpontokra, vagy más gyűjtőpontokra

elhozzák. Ezzel a kis személyes erőfeszítéssel Ön is hozzájárul az értékes nyersanyagok

újrahasznosításához és a mérgező anyagok kezeléséhez.

Miljövänlig hantering av avfall

Gamla elektriska apparater får inte kasseras tillsammans med restavfallet utan måste

kasseras separat. Kassering på den lokala insamlingsplatsen för privatpersoner är gratis.

Ägaren av gamla apparater ansvarar för att ta apparaterna till dessa insamlingsplatser eller

till liknande insamlingsplatser. Med denna lilla personliga insats bidrar du till återvinning av

värdefulla råvaror och hantering av giftiga ämnen.

Umhversvæn förgun

Ekki má farga gömlum raftækjum með úrgangsleifum, heldur þarf að farga þeim

sérstaklega. Förgun á almennum söfnunarstöðum er ókeypis fyrir einstaklinga. Eigandi

gamalla tækja ber ábyrgð á að koma með tækin á þessa söfnunarstaði eða á svipaða

söfnunarstaði. Með þessu litla persónulega átaki stuðlar þú að endurvinnslu verðmætra

hráefna og meðferð eitrurefna.

Çevre dostu bertaraf

Eski elektrikli cihazlar, diğer atıklarla birlikte bertaraf edilmemeli, ayrıca atılmalıdır. Özel

kişiler aracılığıyla genel toplama noktasına bertaraf işlemi ücretsiz olarak yapılmaktadır.

Eski cihazların sahibi, cihazları bu toplama noktalarına veya benzer toplama noktalarına

getirmekten sorumludur. Bu az miktardaki kişisel çabayla, değerli ham maddelerin geri

dönüştürülmesine ve toksik maddelerin işleme alınmasına katkıda bulunmuş olursunuz.

IC Compliance

This device complies with ICES-003 standard. Operation is subject to the following two

conditions: (1) this device may not cause interference, and (2) this device must accept any

interference, including interference that may cause undesired operation of the device.

CAN ICES-3(B)/NMB-3(B)

如果您对说明书有任何疑问或建议，请通过以下电子邮箱联系我们：

[email protected]。

If you have any questions about this document, please contact DJI

by sending a message to [email protected].

Printed in China.

微信扫一扫关注

大疆行业应用公众号

行业应用

微信扫一扫关注

大疆农业服务公众号

For the latest information on Agras products,

scan the Facebook or YouTube QR code.

Facebook YouTube

DJI Support

DJI 技术支持

http://www.dji.com/support

35PDT2SMDY01

dji T Series Spreading System ユーザーガイド

関連論文

その他の書類