Sony DSC-RX100M3 取扱説明書

4-539-039-81(1)

DSC-RX100M3

Digital Still Camera / Instruction Manual GB

CT

GB

2

This camera is equipped with a built-in instruction guide.

In-Camera Guide

The camera displays explanations for MENU/Fn (Function) items and the

setting values.

1 Press the MENU button or the Fn (Function) button.

2 Select the desired item, then press the C/ (Delete) button.

English

Learning more about the camera (“Help Guide”)

“Help Guide” is an on-line manual. You can read the “Help

Guide” on your computer or smartphone.

Refer to it for in-depth instructions on the many functions of

the camera.

URL:

http://rd1.sony.net/help/dsc/1410/h_zz/

Viewing the Guide

C/ (Delete)

MENU

Fn (Function)

GB

3

GB

Owner’s Record

The model and serial numbers are located on the bottom. Record the serial number in the

space provided below. Refer to these numbers whenever you call your Sony dealer

regarding this product.

Model No. WW808161 (DSC-RX100M3)

Serial No. _____________________________

Model No. AC-UB10C/AC-UB10D

Serial No. _____________________________

To reduce fire or shock hazard, do not expose the unit to rain or

moisture.

IMPORTANT SAFETY INSTRUCTIONS

-SAVE THESE INSTRUCTIONS

DANGER

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, CAREFULLY FOLLOW THESE

INSTRUCTIONS

If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the

proper configuration for the power outlet.

[ Battery pack

If the battery pack is mishandled, the battery pack can burst, cause a fire or even chemical

burns. Observe the following cautions.

• Do not disassemble.

• Do not crush and do not expose the battery pack to any shock or force such as

hammering, dropping or stepping on it.

• Do not short circuit and do not allow metal objects to come into contact with the battery

terminals.

• Do not expose to high temperature above 60°C (140°F) such as in direct sunlight or in a

car parked in the sun.

• Do not incinerate or dispose of in fire.

• Do not handle damaged or leaking lithium ion batteries.

WARNING

CAUTION

GB

4

• Be sure to charge the battery pack using a genuine Sony battery charger or a device that

can charge the battery pack.

• Keep the battery pack out of the reach of small children.

• Keep the battery pack dry.

• Replace only with the same or equivalent type recommended by Sony.

• Dispose of used battery packs promptly as described in the instructions.

[ AC Adaptor

Use the nearby wall outlet (wall socket) when using the AC Adaptor. Disconnect the AC

Adaptor from the wall outlet (wall socket) immediately if any malfunction occurs while

using the apparatus.

The power cord (mains lead), if supplied, is designed specifically for use with this camera

only, and should not be used with other electrical equipment.

[ RECYCLING LITHIUM-ION BATTERIES

Lithium-Ion batteries are recyclable.

You can help preserve our environment by returning your used

rechargeable batteries to the collection and recycling location nearest

you.

For more information regarding recycling of rechargeable batteries,

call toll free

1-800-822-8837, or visit http://www.call2recycle.org/

Caution: Do not handle damaged or leaking Lithium-Ion batteries.

[ Battery pack

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

CAN ICES-3 B/NMB-3 B

This equipment complies with FCC/IC radiation exposure limits set forth for an

uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines

and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low

levels of RF energy that are deemed to comply without testing of specific absorption ratio

(SAR).

For Customers in the U.S.A. and Canada

GB

5

GB

If you have any questions about this product, you may call:

Sony Customer Information Center

1-800-222-SONY (7669)

The number below is for the FCC related matters only.

[ Regulatory Information

This equipment must not be co-located or operated in conjunction with any other antenna

or transmitter.

[ CAUTION

You are cautioned that any changes or modifications not expressly approved in this manual

could void your authority to operate this equipment.

[ Note:

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

The supplied interface cable must be used with the equipment in order to comply with the

limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.

For Customers in the U.S.A.

Declaration of Conformity

Trade Name: SONY

Model No.: WW808161

Responsible Party: Sony Electronics Inc.

Address: 16530 Via Esprillo,

San Diego, CA 92127 U.S.A.

Telephone No.: 858-942-2230

This device complies with Part15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may cause

undesired operation.

GB

6

This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) this device may not cause

interference, and (2) this device must accept any interference, including interference that

may cause undesired operation of the device.

[ Notice for the customers in the countries applying EU Directives

Manufacturer: Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan

For EU product compliance: Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327

Stuttgart, Germany

Hereby, Sony Corporation, declares that this equipment is in compliance with the essential

requirements and other relevant provisions of Directive 1999/5/EC. For details, please

access the following URL:

http://www.compliance.sony.de/

[ Notice

If static electricity or electromagnetism causes data transfer to discontinue midway (fail),

restart the application or disconnect and connect the communication cable (USB, etc.)

again.

This product has been tested and found compliant with the limits set out in the EMC

regulation for using connection cables shorter than 3 meters (9.8 feet).

The electromagnetic fields at the specific frequencies may influence the picture and sound

of this unit.

For Customers in Canada

For Customers in Europe

GB

7

GB

[ Disposal of waste batteries and electrical and electronic

equipment (applicable in the European Union and other

European countries with separate collection systems)

This symbol on the product, the battery or on the packaging indicates

that the product and the battery shall not be treated as household waste.

On certain batteries this symbol might be used in combination with a

chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb)

are added if the battery contains more than 0.0005% mercury or

0.004% lead. By ensuring these products and batteries are disposed of

correctly, you will help prevent potentially negative consequences for

the environment and human health which could otherwise be caused by inappropriate

waste handling. The recycling of the materials will help to conserve natural resources.

In case of products that for safety, performance or data integrity reasons require a

permanent connection with an incorporated battery, this battery should be replaced by

qualified service staff only. To ensure that the battery and the electrical and electronic

equipment will be treated properly, hand over these products at end-of-life to the

applicable collection point for the recycling of electrical and electronic equipment. For all

other batteries, please view the section on how to remove the battery from the product

safely. Hand the battery over to the applicable collection point for the recycling of waste

batteries. For more detailed information about recycling of this product or battery, please

contact your local Civic Office, your household waste disposal service or the shop where

you purchased the product or battery.

[ Note

Some certification marks for standards supported by the camera can be confirmed on the

screen of the camera.

Select MENU t (Setup) 6 t [Certification Logo].

If display is not possible due to problems such as camera failure, contact your Sony dealer

or local authorized Sony service facility.

For Customers in Singapore

For customers who purchased their camera from a store

in Japan that caters to tourists

GB

8

The number in parentheses indicates the number of pieces.

• Camera (1)

• Rechargeable Battery Pack NP-BX1 (1)

• Micro USB Cable (1)

• AC Adaptor AC-UB10C/UB10D (1)

• Power Cord (mains lead) (not supplied in the USA and Canada) (1)

• Wrist Strap (1)

• Strap adapter (2)

(Strap adapters are used to attach the shoulder strap (sold separately), as

illustrated.)

• Instruction Manual (this manual) (1)

• Wi-Fi Connection/One-touch (NFC) Guide (1)

This guide explains the functions that require a Wi-Fi connection.

Checking the supplied items

For further details on Wi-Fi functions/One-touch (NFC) functions, refer to

the “Wi-Fi Connection/One-touch (NFC) Guide” (supplied) or the “Help

Guide” (page 2).

GB

9

GB

A ON/OFF (Power) switch

B Power/Charge lamp

C Shutter button

D Mode dial

(Intelligent Auto)/

(Superior Auto)/

(Program Auto)/

(Aperture Priority)/

(Shutter Priority)/

(Manual Exposure)/

(Memory recall)/

(Movie)/ (Sweep

Panorama)/ (Scene

Selection)

E For shooting: W/T (zoom) lever

For viewing: (Index) lever/

Playback zoom lever

F Self-timer lamp/AF illuminator

G Flash

• Do not cover the flash with your

finger.

• When using the flash, slide the

(Flash pop-up) switch. If not

using the flash, press it down

manually.

• When not using the flash, press it

back into the camera body.

H Diopter-adjustment lever

Identifying parts

GB

10

I Viewfinder

• When using the viewfinder, slide

down the Viewfinder pop-up

switch, then pull the eyepiece out

from the viewfinder until it

clicks.

• When you look into the

viewfinder, the viewfinder mode

is activated, and when you take

your face away from the

viewfinder, the viewing mode

returns to the monitor mode.

J Microphone

K Viewfinder pop-up switch

L Hook for strap

M (N Mark)

• Touch the mark when you

connect the camera to a

smartphone equipped with the

NFC function.

• NFC (Near Field

Communication) is an

international standard of the

short-range wireless

communication technology.

N Control ring

O Lens

P Eye sensor

Q (Flash pop-up) switch

R Monitor

• You can adjust the monitor to an

easily viewable angle and shoot

from any position.

S Light sensor

T For shooting: Fn (Function)

button

For viewing: (Send to

Smartphone) button

U MOVIE (Movie) button

V Multi/Micro USB Terminal

• Supports Micro USB compatible

device.

W HDMI micro jack

X MENU button

Y Wi-Fi sensor (built-in)

Z Control wheel

wj (Playback) button

wk C/ (Custom/Delete) button

wl Battery insertion slot

e; Battery eject lever

ea Tripod socket hole

• Use a tripod with a screw less

than 5.5 mm (7/32 inches) long.

Otherwise, you cannot firmly

secure the camera, and damage to

the camera may occur.

es Access lamp

ed Memory card slot

ef Battery/Memory card cover

eg Speaker

GB

11

GB

Inserting the battery pack

1

Open the cover.

2

Insert the battery pack.

• While pressing the battery eject lever, insert the battery pack as

illustrated. Make sure that the battery eject lever locks after insertion.

• Closing the cover with the battery inserted incorrectly may damage the

camera.

Battery eject lever

GB

12

Charging the battery pack

1

Connect the camera to the AC Adaptor (supplied),

using the micro USB cable (supplied).

2

Connect the AC Adaptor to the wall outlet (wall socket).

The power/charge lamp lights orange, and charging starts.

• Turn off the camera while charging the battery.

• You can charge the battery pack even when it is partially charged.

• When the power/charge lamp flashes and charging is not finished,

remove and re-insert the battery pack.

Power cord

(Mains lead)

For customers in the USA

and Canada

For customers in countries/regions

other than the USA and Canada

Power/Charge lamp

Lit: Charging

Off: Charging finished

Flashing:

Charging error or

charging paused

temporarily because the

camera is not within the

proper temperature range

GB

13

GB

• If the power/charge lamp on the camera flashes when the AC Adaptor is connected

to the wall outlet (wall socket), this indicates that charging is temporarily stopped

because the temperature is outside the recommended range. When the temperature

gets back within the appropriate range, the charging resumes. We recommend

charging the battery pack in an ambient temperature of between 10°C to 30°C

(50ºF to 86ºF).

• The battery pack may not be effectively charged if the terminal section of the

battery is dirty. In this case, wipe any dust off lightly using a soft cloth or a cotton

swab to clean the terminal section of the battery.

• Connect the AC Adaptor (supplied) to the nearest wall outlet (wall socket). If

malfunctions occur while using the AC Adaptor, disconnect the plug from the wall

outlet (wall socket) immediately to disconnect from the power source.

• When charging is finished, disconnect the AC Adaptor from the wall outlet (wall

socket).

• Be sure to use only genuine Sony brand battery packs, micro USB cable (supplied)

and AC Adaptor (supplied).

• The AC Adaptor AC-UD11 (sold separately) may not be available in some

countries/regions.

x

Charging time (Full charge)

The charging time is approximately 230 min. using the AC Adaptor

(supplied).

• The above charging time applies when charging a fully depleted battery pack at a

temperature of 25°C (77°F). Charging may take longer depending on conditions of

use and circumstances.

Notes

GB

14

x

Charging by connecting to a computer

The battery pack can be charged by connecting the camera to a computer using

a micro USB cable. Connect the camera to the computer with the camera

turned off.

• If you connect the camera to a computer when power is turned on, the

camera will be powered by the computer, which allows you to import images

to a computer without worrying about the battery running out.

• Note the following points when charging via a computer:

– If the camera is connected to a laptop computer that is not connected to a power

source, the laptop battery level decreases. Do not charge for an extended period

of time.

– Do not turn on/off or restart the computer, or wake the computer to resume from

sleep mode when a USB connection has been established between the computer

and the camera. That may cause the camera to malfunction. Before turning on/

off, or restarting the computer or waking the computer from sleep mode,

disconnect the camera and the computer.

– No guarantees are made for charging using a custom-built computer or a

modified computer.

Notes

To a USB jack

GB

15

GB

x

Battery life and number of images that can be

recorded and played back

• The above number of images applies when the battery pack is fully charged. The

number of images may decrease depending on the conditions of use.

• The number of images that can be recorded is for shooting under the following

conditions:

– Using Sony Memory Stick PRO Duo™ (Mark2) media (sold separately)

– The battery pack is used at an ambient temperature of 25°C (77°F).

– [Display Quality] is set to [Standard]

• The number for “Shooting (still images)” is based on the CIPA standard, and is for

shooting under the following conditions:

(CIPA: Camera & Imaging Products Association)

– DISP is set to [Display All Info.].

– Shooting once every 30 seconds.

– The zoom is switched alternately between the W and T ends.

– The flash strobes once every two times.

– The power turns on and off once every ten times.

• The numbers of minutes for movie shooting are based on the CIPA standard, and

are for shooting under the following conditions:

– [ Record Setting]: 60i 17M(FH)/50i 17M(FH)

– Typical movie shooting: Battery life based on repeatedly starting/stopping

shooting, zooming, turning on/off, etc.

– Continuous movie shooting: Battery life based on non-stop shooting until the

limit (29 minutes) has been reached, and then continued by pressing the MOVIE

button again. Other functions, such as zooming, are not operated.

Battery life Number of images

Shooting (still

images)

Screen Approx. 160 min. Approx. 320 images

Viewfinder Approx. 115 min. Approx. 230 images

Typical movie

shooting

Screen Approx. 50 min. —

Viewfinder Approx. 50 min. —

Continuous

movie shooting

Screen Approx. 85 min. —

Viewfinder Approx. 90 min. —

Viewing (still images) Approx. 215 min. Approx. 4300 images

Notes

GB

16

x

Supplying power

You can use the AC Adaptor AC-UD10 (sold separately) or AC-UD11 (sold

separately) for shooting and playback to supply power when shooting or

playing back images.

• You cannot shoot or play back images while the supplied AC Adaptor is

connected to the camera.

Notes

Inserting a memory card (sold separately)

1

Open the cover.

2

Insert the memory card (sold separately).

• With the notched corner facing as illustrated, insert the memory card

until it clicks into place.

3

Close the cover.

Ensure the notched corner

faces correctly.

GB

17

GB

x

Memory cards that can be used

• In this manual, the products in the table are collectively referred to as follows:

A: Memory Stick PRO Duo media

B: Memory Stick Micro media

C: SD card

D: microSD memory card

• When recording XAVC S format movies, use the following memory cards:

– SDXC memory card (64 GB or more and Class 10 or faster)

– SDXC memory card (64 GB or more and UHS-I-compatible)

– Memory Stick XC-HG Duo media

• This camera supports UHS-I-compatible SD cards.

• When using Memory Stick Micro media or microSD memory cards with this

camera, make sure to use with the appropriate adaptor.

x

To remove the memory card/battery pack

Memory card: Push the memory card in once to eject the memory card.

Battery pack: Slide the battery eject lever. Be sure not to drop the battery pack.

• Never remove the memory card/battery pack when the access lamp (page 10) is lit.

This may cause damage to data in the memory card.

Memory card For still images For movies

A

Memory Stick XC-HG Duo™

Memory Stick PRO Duo (Mark2 only)

Memory Stick PRO-HG

Duo™

B Memory Stick Micro™ (M2) (Mark2 only)

C

SD memory card (Class 4 or faster)

SDHC memory card (Class 4 or faster)

SDXC memory card (Class 4 or faster)

D

microSD memory card (Class 4 or faster)

microSDHC memory card (Class 4 or faster)

microSDXC memory card (Class 4 or faster)

Notes

GB

18

Setting the clock

1

Press the ON/OFF (Power) button.

Date & Time setting is displayed when you turn on the camera for the first

time.

• It may take time for the power to turn on and allow operation.

2

Check that [Enter] is selected on the screen, then press

z on the control wheel.

3

Select a desired geographic location by following the

on-screen instructions, then press z.

4

Set [Daylight Savings], [Date/Time] and [Date Format],

then press z.

• When setting [Date/Time], midnight is 12:00 AM, and noon is

12:00 PM.

5

Check that [Enter] is selected, then press z.

Control wheel

ON/OFF (Power)

Select items: b/B

Set the numeric value of date and

time:

v/V//

Set:

z

Power/Charge lamp (green)

GB

19

GB

Shooting still images

Shooting movies

• When using the zoom function while shooting a movie, the sound of the camera

operating will be recorded. The sound of the MOVIE button operating may also be

recorded when movie recording is finished.

• Continuous movie shooting is possible for approximately 29 minutes at one time

with the camera’s default settings and when the ambient temperature is

approximately 25°C (77°F). When movie recording is finished, you can restart

recording by pressing the MOVIE button again. Recording may stop to protect the

camera depending on the ambient temperature.

Shooting still images/movies

1

Press the shutter button halfway down to focus.

When the image is in focus, a beep sounds and the z or indicator

lights.

2

Press the shutter button fully down to shoot an image.

1

Press the MOVIE (Movie) button to start recording.

• Use the W/T (zoom) lever to change the zoom scale.

2

Press the MOVIE button again to stop recording.

Notes

Mode dial

Shutter button

: Intelligent Auto

: Movie

MOVIE

W/T (zoom)

lever

W: zoom out

T: zoom in

GB

20

x

Selecting next/previous image

Select an image by pressing B (next)/b (previous) on the control wheel or by

turning the control wheel. Press z in the center of the control wheel to view

movies.

x

Deleting an image

1 Press the C/ (Delete) button.

2 Select [Delete] with v on the control wheel, then press z.

x

Returning to shooting images

Press the shutter button halfway down.

Viewing images

1

Press the (Playback) button.

C/ (Delete)

Control wheel

(Playback)

W: zoom out

T: zoom in

Select images: B (next)/b (previous) or

turn the control wheel

Set: z

ページが読み込まれています...

Sony DSC-RX100M3 取扱説明書

Sony DSC-RX100M3 取扱説明書

他の言語で

関連論文

その他のドキュメント