2017.01V1.0
User Guide
使用说明
INSPIRE 2
DJI Focus Handwheel-
Remote Controller Stand
手持跟焦器遥控器支架
2
©
2017 DJI All Rights Reserved.
Disclaimer and Warning
Congratulations on purchasing your new DJI™ product. The
information in this document affects your safety and your legal
rights and responsibilities. Read this entire document carefully
to ensure proper conguration before use. Failure to read and
follow instructions and warnings in this document may result in
serious injury to yourself or others, damage to your DJI product,
or damage to other objects in the vicinity. This document and
all other collateral documents are subject to change at the sole
discretion of DJI.
By using this product, you hereby signify that you have read this
disclaimer and warning carefully and that you understand and
agree to abide by the terms and conditions herein. You agree
that you are solely responsible for your own conduct while using
this product, and for any consequences thereof.
You agree to use this product only for purposes that are
proper and in accordance with all applicable laws, rules, and
regulations, and all terms, precautions, practices, policies and
guidelines DJI has made and may make available.
DJI accepts no liability for damage, injury or any legal
responsibility incurred directly or indirectly from the use of
this product. The user shall observe safe and lawful practices
including, but not limited to, those set forth in this document.
Notwithstanding above, your statutory rights under applicable
national legislation are not affected by this disclaimer.
DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD.
(abbreviated as “DJI”) and its affiliated companies. Names
of products, brands, etc., appearing in this document are
trademarks or registered trademarks of their respective owner
companies. This product and document are copyrighted by DJI
with all rights reserved. No part of this product or document shall
be reproduced in any form without prior written consent of or
authorization from DJI.
Introduction
The DJI Focus Handwheel-Remote Controller stand makes
it easier to use the aircraft Remote Controller and the DJI
Focus Handwheel simultaneously. By allowing the DJI Focus
Handwheel to be connected to the aircraft Remote Controller,
you can y while adjusting focus, aperture and zoom easily.
©
2017 DJI All Rights Reserved.
3
1. Sliding Rod
2. Securing Pad
3. Securing Knob
4. Rosette Mount
5. Securing spanner
3
4
5
1
2
Installation
Tools Required: 1.5mm Hex Key
1. Remove the screws and the securing pad on the remote
controller as shown below.
2. Align the holes on the securing pad of the DJI Focus
Handwheel-Remote Controller stand with the holes on the
remote controller. Insert the original screws and tighten to
secure the securing pad.
4
©
2017 DJI All Rights Reserved.
3. Loosen the securing spanner to adjust the rod so that it feels
comfortable to you. Then return the spanner to its original
position to tighten.
4. Attach the Focus Handwheel to the rosette mount and rotate
the securing knob clockwise to secure it.
Adjusting the Securing Spanner
Remove the screws on the top of the securing spanner to adjust
its position if the securing spanner is hard to tighten, insert
screws and tighten after adjustment.
Put the screws in the correct places during installation
and removal.
Specications
Weight: 143.56 g
A
B
C
A
B
A
B
C
©
2017
大疆创新 版权所有
5
免责声明
感谢您购买 DJI
TM
产品。本文所提及的内容关系到您的安全以及合
法权益与责任。使用本产品之前，请仔细阅读本文以确保已对产品
进行正确的设置。不遵循和不按照本文的说明与警告来操作可能会
给您和周围的人带来伤害，损坏本产品或其它周围的物品。本文档
及本产品所有相关的文档最终解释权归大疆
TM
创新（DJI）所有。
如有更新，恕不另行通知。请访问 www.dji.com 官方网站以获取
最新的产品信息。
一旦使用本产品，即视为您已经仔细阅读本免责声明与警告，理解、
认可和接受本声明全部条款和内容。您承诺对使用本产品以及可能
带来的后果负全部责任。您承诺仅出于正当目的使用本产品，并且
同意本条款以及大疆创新（DJI）制定的任何相关条例、政策和指引。
大疆创新（DJI）对于直接或间接使用本产品而造成的损坏、伤害
以及任何法律责任不予负责。用户应遵循包括但不限于本文提及的
所有安全指引。
即使存在上述规定，消费者权益依然受当地法律法规所保障，并不
受本免责声明影响。
DJI 是深圳市大疆创新科技有限公司及其关联公司的商标。本文
出现的产品名称、品牌等，均为其所属公司的商标或注册商标。
本产品及手册为大疆创新版权所有。未经许可，不得以任何形式
复制翻印。
简 介
手持跟焦器遥控器支架用于将 DJI Focus 手持跟焦器固定于飞行器
遥控器上。轻松实现在控制飞行器飞行的过程中，随时调节相机镜
头对焦、光圈及变焦。
1. 水平杆
2. 固定模块
3. 锁紧旋钮
4. 盘齿接口
5. 固定扳手
3
4
5
1
2
6
©
2017 大疆创新 版权所有
安 装
自备工具：1.5mm 内六角扳手
1. 松开遥控器移动设备支架固定模块上的螺丝，并取下该模块。
2. 将支架固定模块上的螺丝孔与遥控器上的螺丝孔对齐，并用之
前卸下的螺丝拧紧固定。
3. 松开固定扳手以拉动水平杆，调整完毕后锁紧固定扳手。
A
B
C
©
2017
大疆创新 版权所有
7
4. 将 DJI Focus 手持跟焦器安装至支架的盘齿接口，顺时针旋转
锁紧旋钮进行固定。
调节固定扳手
若支架上固定扳手较松，请卸下支架顶部螺丝并调整固定扳手位
置，调整完毕后再将螺丝拧紧进行固定。
安装过程中请注意保管好卸下的螺丝，以免丢失。
参数
重量：143.56 g
A
B
A
B
C
http://www.dji.com/support
DJI Support
技术支持
如果您对说明书有任何疑问或建议，请通过以下
电子邮箱联系我们：
。
中国印制
If you have any questions about this document,
please contact DJI by sending a message to
.
Printed in China.
INSPIRE is a trademark of DJI.
Copyright © 2017 DJI All Rights Reserved.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
