Philips S5080/03 ユーザーマニュアル

Series S5000

XZ5800, S5230,

S5210, S5095,

S5091, S5090,

S5082, S5081,

S5080, S5079,

S5078, S5077

Series S5000

XZ5800, S5230,

S5210, S5095,

S5091, S5090,

S5082, S5081,

S5080, S5079,

S5078, S5077

5

1

14

13

2

3

4

6

7

8

9

10

12

11

15

16

17

18

English 6

简体中文 31

English

6

Introduction

Congratulations on your purchase and welcome

to Philips! To fully benet from the support that

Philips oers, register your product at

www.philips.com/welcome.

General description

1 Click-on trimmer attachment (S5230/04,

S5210/04, S5082/61, S5081/04, S5079/04,

S5078/04 only)

2 Protection cap for shaving unit

3 Click-on shaving unit

4 Shaving unit release button

5 On/o button

6 Handle

7 Socket for small plug

8 Battery charge indicator with 1 light

9 Unplug for use symbol

10 Travel lock symbol

11 Replacement reminder

(S5210/04, S5230/04 only)

12 Cleaning reminder (S5210/04, S5230/04 only)

13 Click-on cleansing brush attachment

(XZ5800/69, S5095/58, S5091/50,

S5090/58 only)

14 Protection cap for cleansing brush attachment

(XZ5800/69, S5095/58, S5091/50,

S5090/58 only)

15 Protection cap for nose trimmer attachment

(S5091/50, S5082/61 only)

16 Click-on nose trimmer attachment

(S5091/50, S5082/61 only)

17 Supply unit (adapter)

18 Small plug

The accessories supplied may vary for dierent

products. The box shows the accessories that have

been supplied with your appliance.

English

7

Important safety information

Read this important information carefully before

you use the appliance and its accessories and save

it for future reference. The accessories supplied

may vary for dierent products.

Danger

- Keep the supply unit dry.

Warning

- To charge the battery, only use the detachable

supply unit (HQ8505) provided with the

appliance.

- The supply unit contains a transformer. Do not

cut o the supply unit to replace it with another

plug, as this causes a hazardous situation.

- This appliance can be used by children aged

from 8 years and above and persons with

reduced physical, sensory or mental capabilities

or lack of experience and knowledge if they

have been given supervision or instruction

concerning use of the appliance in a safe way

and understand the hazards involved. Children

shall not play with the appliance. Cleaning

and user maintenance shall not be made by

children without supervision.

- Always unplug the shaver before you clean it

under the tap.

- Always check the appliance before you use

it. Do not use the appliance if it is damaged,

as this may cause injury. Always replace a

damaged part with one of the original type.

English

8

- Do not open the appliance to replace the

rechargeable battery.

Caution

- Never immerse the cleaning system or the

charging stand in water and do not rinse it

under the tap.

- Never use water hotter than 80°C to rinse the

shaver.

- Only use this appliance for its intended purpose

as shown in the user manual.

- For hygienic reasons, the appliance should only

be used by one person.

- Never use compressed air, scouring pads,

abrasive cleaning agents or aggressive

liquids such as petrol or acetone to clean the

appliance.

- If your shaver comes with a cleaning system,

always use the original Philips cleaning uid

(cartridge or bottle, depending on the type of

cleaning system).

- Always place the cleaning system on a stable,

level and horizontal surface to prevent leakage.

- If your cleaning system uses a cleaning

cartridge, always make sure the cartridge

compartment is closed before you use the

cleaning system to clean or charge the shaver.

- When the cleaning system is ready for use, do

not move it to prevent leakage of cleaning uid.

- Water may drip from the socket at the bottom

of the shaver when you rinse it. This is normal

and not dangerous because all electronics

are enclosed in a sealed power unit inside the

shaver.

- Do not use the supply unit in or near wall

sockets that contain an electric air freshener to

prevent irreparable damage to the supply unit.

English

9

Electromagnetic elds (EMF)

- This Philips appliance complies with all

applicable standards and regulations regarding

exposure to electromagnetic elds.

General

- This shaver is waterproof. It is suitable for use

in the bath or shower and for cleaning under

the tap. For safety reasons, the shaver can

therefore only be used without cord.

- The appliance is suitable for mains voltages

ranging from 100 to 240 volts.

- The supply unit transforms 100-240 volts to a

safe low voltage of less than 24 volts.

The display

Charging

Note: If you press the on/o button during

charging, the 'unplug for use' symbol ashes white

to remind you that you have to disconnect the

appliance from the wall socket.

Battery charge indicator with 1 light

Quick charge (XZ5800, S5230/04, S5210/04,

S5095/58, S5090/58, S5081/04 only): When the

battery is empty and you connect the appliance

to the wall socket, the battery charge indicator

ashes quickly. When the appliance contains

enough energy for one shave, the battery charge

indicator starts ashing slowly.

While the appliance continues to charge, the

battery charge indicator ashes slowly until the

appliance is fully charged.

English

10

Battery fully charged

Note: When the battery is full, the display switches

o automatically after 30 minutes.

Note: This appliance can only be used without cord.

Battery charge indicator with 1 light

When the battery is fully charged, the battery

charge indicator lights up white continuously.

Battery low

Battery charge indicator with 1 light

When the battery is almost empty, the battery

charge indicator ashes orange.

’Unplug for use’ reminder

The appliance is equipped with an ‘unplug for

use’ reminder. The ‘unplug for use’ symbol ashes

to remind you that you have to disconnect the

appliance from the supply unit before you can

switch it on.

English

11

Cleaning reminder

Clean the shaver after every shave for optimal

performance. When you switch o the appliance,

the cleaning reminder ashes to remind you to

clean the appliance.

Travel lock

You can lock the appliance when you are going to

travel. The travel lock prevents the appliance from

being switched on by accident.

Activating the travel lock

1 Press the on/o button for 3 seconds to enter

the travel lock mode.

While you activate the travel lock, the travel

lock symbol lights up continuously. When the

travel lock is activated, the travel lock symbol

ashes.

Deactivating the travel lock

1 Press the on/o button for 3 seconds.

The travel lock symbol ashes and then lights

up continuously. The appliance is now ready for

use again.

3 sec.

English

12

Replacement reminder

For maximum shaving performance, we advise

you to replace the shaving heads every two years.

The appliance is equipped with a replacement

reminder which reminds you to replace the shaving

heads. The shaving unit symbol and arrows light

up to indicate that you have to replace the shaving

heads.

Note: After replacing the shaving heads, you need

to reset the replacement reminder by pressing the

on/o button for 7 seconds.

(S5210/04, S5230/04 only)

Charging

Charge the shaver before you use it for the rst

time and when the display indicates that the

battery is almost empty.

Charging takes approx. 1 hour (XZ5800, S5230/04,

S5210/04, S5095/58, S5090/58, S5081/04) or

8 hours (S5091/50, S5082/61, S5080/03,

S5079/04, S5078/04, S5077/04).

Note:You cannot use the appliance while it is

charging.

Charging with the supply unit

1 Make sure the appliance is switched o.

2 Put the supply unit in the wall socket and put

the small plug in the appliance.

3 After charging, remove the supply unit from the

wall socket and pull the small plug out of the

appliance.

English

13

Using the appliance

Note: This appliance can only be used without

cord.

Switching the appliance on and o

1 To switch on the appliance, press the on/o

button once.

2 To switch o the appliance, press the on/o

button once.

Shaving

Skin adaptation period

Your rst shaves may not bring you the result you

expect and your skin may even become slightly

irritated. This is normal. Your skin and beard need

time to adapt to any new shaving system. To allow

your skin to adapt to this new appliance, we advise

you to shave regularly (at least 3 times a week)

and exclusively with this appliance for a period of

3 weeks.

Dry shaving

1 Switch on the appliance.

2 Move the shaving heads over your skin in

circular movements to catch all hairs growing in

dierent directions. Exert gentle pressure for a

close comfortable shave.

Note: Do not press too hard, this can cause skin

irritation.

3 Clean the appliance after use (see 'Cleaning

and maintenance').

Wet shaving

You can also use this appliance on a wet face with

shaving foam or shaving gel.

English

14

To shave with shaving foam or shaving gel,

follow the steps below:

1 Apply some water to your skin.

2 Apply shaving foam or shaving gel to your skin.

3 Rinse the shaving unit under the tap to ensure

that the shaving unit glides smoothly over your

skin.

4 Switch on the appliance.

5 Move the shaving heads over your skin in

circular movements to catch all hairs growing in

dierent directions. Exert gentle pressure for a

close comfortable shave.

Note: Do not press too hard, this can cause skin

irritation.

Note: Rinse the shaving unit regularly to ensure

that it continues to glide smoothly over your

skin.

6 Dry your face.

7 Clean the appliance after use

(see 'Cleaning and maintenance').

Note: Make sure you rinse all foam or shaving

gel o the appliance.

English

15

Using the click-on attachments

Note: The accessories supplied may vary for

dierent products. The box shows the accessories

that have been supplied with your appliance.

Removing or attaching the click-on

attachments

1 Make sure the appliance is switched o.

2 Pull the attachment straight o the appliance.

Note: Do not twist the attachment while you

pull it o the appliance.

3 Insert the lug of the attachment into the slot in

the top of the appliance. Then press down the

attachment to attach it to the appliance (‘click’).

Using the trimmer attachment

You can use the trimmer attachment to groom

your sideburns and moustache.

(S5230/04, S5210/04, S5082/61, S5081/04,

S5079/04, S5078/04 only)

1 Attach the attachment to the appliance ('click').

2 Switch on the appliance.

3 Hold the trimmer attachment perpendicular to

the skin and move the appliance downwards

while you exert gentle pressure.

4 Clean the attachment after use

(see ‚Cleaning and maintenance‘).

English

16

Using the cleansing brush attachment

Use the rotating cleansing brush attachment with

your daily cleansing cream. The cleansing brush

attachment removes oil and dirt, contributing to a

healthy and oil-free skin.

(XZ5800/69, S5095/58, S5091/50,

S5090/58 only)

1 Attach the attachment to the appliance ('click').

2 Moisten the attachment with water.

Note: Do not use the appliance with a dry brush

attachment, as this can irritate the skin.

3 Moisten your face with water and apply a

cleanser to your face.

4 Place the attachment on your cheek.

5 Switch on the appliance.

6 Gently move the attachment across your skin

from the nose towards the ear. Do not push the

attachment too hard onto the skin to make sure

the treatment remains comfortable.

Note: Do not cleanse the sensitive area around

your eyes.

20 sec.

English

17

7 After approx. 20 seconds move the appliance

to your other cheek and start cleansing this part

of your face.

8 After approx. 20 seconds move the appliance

to your forehead and start cleansing this part of

your face. Gently move the brush head from left

to right.

Note: We advise you to not overdo the

cleansing and to not cleanse any zone longer

than 20 seconds.

9 After the treatment, rinse and dry your face.

Your face is now ready for the next step of your

daily skincare routine.

10 Clean the attachment after use

(see 'Cleaning and maintenance').

Using the nose trimmer attachment

You can use the nose trimmer attachment to trim

your nose and/or ear hair.

(S5091/50, S5082/61 only)

Trimming nose hair

When trimming nose hair, make sure your nostrils

are clean.

1 Attach the attachment to the appliance ('click').

2 Switch on the appliance.

3 Carefully insert the attachment into one of your

nostrils.

Do not insert the attachment more than 0.5cm

into your nostrils.

20 sec.

English

18

4 Slowly move the attachment around to remove

all unwanted hairs in your nostrils.

5 Clean the attachment after use

(see 'Cleaning and maintenance').

Trimming ear hair

When trimming ear hair, make sure your outer ear

channels are clean and free from wax.

1 Attach the attachment to the appliance ('click').

2 Switch on the appliance.

3 Slowly move the attachment along the rim of

the ear to remove hairs that stick out beyond

the rim.

4 Insert the attachment into the outer ear

channel.

Do not insert the attachment more than 0.5cm

into your ear channel, as this could damage the

eardrum.

5 Slowly turn the attachment around to remove

all unwanted hairs from your outer ear channel.

6 Clean the attachment after use

(see 'Cleaning and maintenance').

Cleaning and maintenance

Note: The accessories supplied may vary for

dierent products. The box shows the accessories

that have been supplied with your appliance.

Cleaning the shaver under the tap

Clean the shaver after every shave for optimal

performance.

Caution: Be careful with hot water. Always check

if the water is not too hot, to prevent burning

your hands.

English

19

Never dry the shaving unit with a towel or tissue,

as this may damage the shaving heads.

1 Switch on the appliance.

2 Rinse the shaving unit under a warm tap.

3 Switch o the appliance. Press the release

button to open the shaving unit.

4 Rinse the hair chamber under the tap.

5 Rinse the shaving head holder under a warm

tap.

6 Carefully shake o excess water and let the

shaving head holder dry.

7 Close the shaving head holder ('click').

English

20

Cleaning the click-on attachments

Never dry trimmer or beard styler attachments with

a towel or tissue, as this may damage the trimming

teeth.

The accessories supplied may vary for dierent

products. The box shows the accessories that have

been supplied with your appliance.

Cleaning the trimmer attachment

Clean the trimmer attachment every time you have

used it.

(S5230/04, S5210/04, S5082/61, S5081/04,

S5079/04, S5078/04 only)

1 Switch on the appliance with the trimmer

attachment attached.

2 Rinse the attachment under a warm tap.

3 After cleaning, switch o the appliance.

4 Carefully shake o excess water and let the

attachment dry.

Tip: For optimal performance, lubricate the teeth of

the attachment with a drop of sewing machine oil

every six months.

Cleaning the cleansing brush attachment

Clean the cleansing brush attachment every time

you have used it.

(XZ5800/69, S5095/58, S5091/50, S5090/58 only)

1 Switch o the appliance.

2 Detach the brush head from the brush base.

3 Clean the parts thoroughly with warm water

and soap.

4 Dry the cleansing brush attachment with a

towel.

ページが読み込まれています...

Philips S5080/03 ユーザーマニュアル

Philips S5080/03 ユーザーマニュアル

他の言語で

関連論文

その他のドキュメント