Yamaha DVD-S1800 取扱説明書

YAMAHA ELECTRONICS CORPORATION, USA

6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.

YAMAHA CANADA MUSIC LTD.

135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA

YAMAHA ELECTRONIK EUROPA G.m.b.H.

SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY

YAMAHA ELECTRONIQUE FRANCE S.A.

RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE

YAMAHA ELECTRONICS (UK) LTD.

YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND

YAMAHA SCANDINAVIA A.B.

J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN

YAMAHA MUSIC AUSTRALIA PTY, LTD.

17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

야마하 뮤직 코리아 ( 주 )

서울특별시 강남구 삼성동 158-9 동성빌딩 8F/9F

©

DVD-S1800

DVD AUDIO/VIDEO SA-CD PLAYER

DVD-S1800

LK

HDMI AUDIO DIRECT

STANDBY

ON

Printed in China CQX1A1277Z

00cv_DVD-S1800_LK.fm Page 1 Tuesday, August 7, 2007 9:06 AM

CAUTION: READ THIS BEFORE OPERATING THIS UNIT.

i En

1 To assure the finest performance, please read this manual

carefully. Keep it in a safe place for future reference.

2 Install this unit in a well ventilated, cool, dry, clean place —

away from direct sunlight, heat sources, vibration, dust,

moisture, or cold. In a cabinet, allow about 2.5 cm

(1 inch) of free space all around this unit for adequate

ventilation.

3 Locate this unit away from other electrical appliances,

motors, or transformers to avoid humming sounds.

4 Do not expose this unit to sudden temperature changes from

cold to hot, nor locate this unit in an environment with high

humidity (i.e., a room with a humidifier) to prevent

condensation inside this unit, which may cause an electrical

shock, fire, damage to this unit, and/or personal injury.

5 Avoid installing this unit in a location where foreign objects

may fall onto this unit or where this unit may be exposed to

liquid dripping or splashing. On the top of this unit, do not

place:

– Other components, as they may cause damage and/or

discoloration on the surface of this unit.

– Burning objects (i.e., candles), as they may cause fire,

damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall,

spilling the liquid and causing an electrical shock to

the user and/or damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth, curtain,

etc. in order not to obstruct heat radiation. If the temperature

inside this unit rises, it may cause fire, damage to this unit,

and/or personal injury.

7 Do not plug in this unit to a wall outlet until all connections

are complete.

8 Do not operate this unit upside-down. It may overheat,

possibly causing damage.

9 Do not use excessive force on switches, knobs and/or cords.

10 When disconnecting the power cord from the wall outlet,

grasp the plug; do not pull the cord.

11 Do not clean this unit with chemical solvents; this might

damage the finish. Use a clean, dry cloth.

12 Use only the voltage specified on this unit. Using this unit

with a higher voltage than specified is dangerous and may

cause fire, damage to this unit, and/or personal injury.

Yamaha will not be held responsible for any damage

resulting from use of this unit with a voltage other than as

specified.

13 Do not attempt to modify or fix this unit. Contact qualified

Yamaha service personnel when any service is needed. The

cabinet should never be opened for any reason.

14 When not planning to use this unit for long periods of time

(i.e., vacation), disconnect the AC power plug from the wall

outlet.

15 Be sure to read the “TROUBLESHOOTING” section on

common operating errors before concluding that this unit is

faulty.

16 Before moving this unit, press STANDBY/ON to set the unit

in standby mode, then disconnect the AC power plug from

the wall outlet.

17 Install this unit near the AC outlet and where the AC power

plug can be reached easily.

18 The batteries shall not be exposed to excessive heat such as

sunshine, fire or the like.

LASER SAFETY

This unit employs a laser. Due to possible eye injury, only a

qualified service person should remove the cover or attempt to

service this device.

DANGER

This unit emits visible laser radiation when open. Avoid direct

eye exposure to beam.

When this unit is plugged into a wall outlet, do not place your

eyes close to the opening of the disc tray and other openings or

look inside.

CAUTION: READ THIS BEFORE OPERATING THIS UNIT.

The unit is not disconnected from the AC power source as long

as it is connected to the wall outlet, even if this unit itself is

turned off. This state is called the standby mode. In this state,

this unit is designed to consume a very small quantity of power.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

CAUTION

Use of controls or adjustments or performance of procedures

other than those specified herein may result in hazardous

radiation exposure.

LASER

Type Semiconductor laser GaAlAs

Wave length 650 nm (DVD)

790 nm (VCD/CD)

Output Power 1.45 mW (DVD)

1.13 mW (VCD/CD)

Beam divergence 60 degrees

CAUTION-

VISIBLE AND INVISIBLE

LASER RADIATION WHEN OPEN. DO NOT

STARE INTO BEAM OR VIEW DIRECTLY

WITH OPTICAL INSTRUMENTS.

1 En

English

Playable disc formats ................................... 3

DVD region codes .............................................. 3

Patent information ........................................ 4

Cleaning discs .............................................. 4

Supplied accessories ................................... 4

Front panel .................................................... 5

Front panel display ....................................... 6

Rear panel ..................................................... 7

Remote control ............................................. 8

General notes on connections .................. 10

Audio connections ..................................... 10

Connecting a stereo amplifier ........................... 10

Connecting an AV receiver with 6ch/

multi-channel input ....................................... 10

Video connections ...................................... 11

HDMI connection ........................................ 12

Connecting the power cable ...................... 14

Step 1: Inserting batteries into

the remote control ................................... 15

Using the remote control .................................. 15

Step 2: Turning on the power .................... 15

Step 3: Setting a TV type ............................ 16

Step 4: Setting a language preference ..... 17

Setting the OSD (On-Screen Display)

language ........................................................ 17

Setting the audio, subtitle and

disc menu languages ..................................... 17

Basic operation ........................................... 18

Pausing playback ............................................... 18

Selecting a track/chapter ................................... 18

Searching backward/forward ............................ 19

Repeat playback .......................................... 19

Repeating playback ........................................... 19

Repeating a section

(except DVD-Audio/MP3/WMA/JPEG) ...... 19

Random playback

(except DVD/SA-CD) ................................ 19

Program playback (CD) .............................. 20

Disc menu operation

(DVD/VCD/SVCD) ..................................... 20

Using the DVD menu ........................................ 20

Using the Video CD playback control (PBC)

menu (VCD/SVCD) ...................................... 21

On-screen display (OSD) menu

(DVD/VCD/SVCD/SA-CD) ........................ 21

Using the OSD menu

(DVD/VCD/SVCD/CD) ............................... 21

Displaying text information (SA-CD) ............... 22

Picture Setting menu

(DVD/VCD/SVCD) ..................................... 22

Adjusting picture settings .................................. 22

Zooming pictures

(DVD-Video/VCD/SVCD/DivX

®

/JPEG) .... 23

Viewing angles (DVD-Video) ...................... 23

Audio and Subtitle languages

(DVD-Video/VCD) ..................................... 24

Selecting an audio language .............................. 24

Selecting a subtitle language

(DVD-Video) ................................................ 24

DivX

®

external subtitle files ....................... 24

Changing pages (DVD-Audio) .................... 24

Group/File selection (DVD-Audio/DivX

®

/

MP3/WMA/Kodak picture CD) ................. 25

Selecting a group (DVD-Audio) ....................... 25

Selecting a file in a folder

(DivX

®

/MP3/WMA/Kodak picture CD) ...... 25

Bonus group playback

(DVD-Audio) ............................................. 25

Changing the playback area

and layer (SA-CD) .................................... 25

Multimedia file playback

(MP3/WMA/DivX

®

/JPEG) ......................... 26

Displaying the thumbnail screen (JPEG) .......... 26

Rotating pictures (JPEG) ................................... 26

CONTENTS

INTRODUCTION 3

FUNCTIONAL OVERVIEW 5

CONNECTIONS 10

GETTING STARTED 15

DISC OPERATION 18

Continued

2 En

CONTENTS

Menu overview ............................................ 27

Setup menu operation ................................ 28

General setup menu ................................... 29

Selecting DVD-Audio mode ............................. 29

Selecting SA-CD mode ..................................... 29

Setting the OSD language ................................. 29

Restricting playback with parental control ....... 29

Changing the parental password ....................... 29

Setting the screen saver ..................................... 30

Setting the auto power function ........................ 30

Setting the sleep timer ....................................... 30

Resetting the system ......................................... 30

Displaying the DivX

®

VOD

registration code ............................................ 30

Audio setup menu ...................................... 31

Setting the analog output .................................. 31

Setting the digital output ................................... 31

Setting the LPCM output .................................. 31

Setting the night listening mode ....................... 31

Speaker setup menu ................................... 32

Setting speaker sizes ......................................... 32

Setting speaker distances .................................. 32

Setting speaker levels ........................................ 33

Setting the SA-CD configuration ...................... 33

Video setup menu ....................................... 34

Setting the TV display ...................................... 34

Setting the TV type ........................................... 34

Selecting the wide screen format ...................... 34

Selecting the black level

(U.S.A. and Canada models only) ................ 35

Selecting the closed caption

(U.S.A. and Canada models only) ................ 35

Setting the still mode ........................................ 35

Selecting the scan function ............................... 35

Switching the SCART video out

(U.K., Europe, and Russia models only) ...... 36

HDMI setup menu ....................................... 36

Setting the HDMI video .................................... 36

Selecting the DVI output range ........................ 37

Setting the HDMI audio .................................... 37

DISC setup menu ........................................ 37

Selecting the default audio/subtitle/

DVD menu language .................................... 37

Selecting an angle mark display ....................... 37

Selecting the PBC (playback control)

function ......................................................... 38

Setting the duration for a slide show ................ 38

SETUP MENU 27 LANGUAGE CODE LIST 39

TROUBLESHOOTING 40

GLOSSARY 42

SPECIFICATIONS 44

3 En

INTRODUCTION

English

Thank you for purchasing this unit. This Owner’s Manual

explains the basic operation of this unit.

• Illustrations in this manual are based on the U.K.,

Europe, and Russia models unless otherwise specified.

• Notes contain important information about safety and

operating instructions.

• y indicates a tip for your operation.

• This manual is printed prior to production. Design and

specifications are subject to change in part as a result of

improvements, etc. In case of differences between the

manual and the product, the product has priority.

• This unit is designed for use with the following discs:

DVD-Video, DVD-Audio, DVD-R, DVD-RW,

DVD+R, DVD+RW, DVD+R DL, Video CD,

Super Video CD, Super Audio CD (SA-CD), Audio CD,

CD-R and CD-RW.

• This unit can play:

– MP3, WMA (except copyright-protected WMA) and

picture (Kodak, JPEG) files recorded on CD-R(W)/

DVD-R(W)/DVD+R(W)

– JPEG/ISO 9660 format

– Maximum 14 character display

–DivX

®

disc on CD-R(W)/DVD-R(W)/DVD+R(W)

– Official DivX

®

Certified product

– Plays all versions of DivX

®

video (including

DivX

®

6) with standard playback of DivX

®

media

files

• CD-R(W), DVD-R(W) and DVD+R(W) cannot be played

unless finalized.

• Copyright-protected WMA files cannot be played with this

unit.

• This unit supports JPEG files of 2848 x 2136 pixels in size.

• Some discs cannot be played depending on the recording

conditions, such as the PC environment and application

software. The characteristics and condition of some discs;

materials, scratches, curvature, etc., may result in playback

failure.

• Be sure to use only CD-R(W), DVD-R(W) and DVD+R(W)

discs made by reliable manufacturers.

• Do not use any non-standard shaped discs (heart-shaped, etc.).

• Do not use discs with tape, seals, or paste on their surface.

Doing so may damage this unit.

• Do not use discs affixed with labels printed by a commercially

available label printer.

DVD region codes

This unit is designed to support the region management

system. Check the regional code number on the DVD disc

package. If the number does not match the region code of

this unit (see the table below or the back of this unit), this

unit may be unable to play the disc.

INTRODUCTION

Playable disc formats

Notes

Destination

Region code

of this unit

Playable discs

U.S.A.

Canada

U.K.

Europe

Asia

Korea

Russia

1

ALL

2

ALL

3

ALL

5

ALL

4 En

INTRODUCTION

–

Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of

Dolby Laboratories.

“DTS” and “DTS Digital Surround” are registered

trademarks of DTS, Inc.

DivX, DivX Certified, and associated logos are

trademarks of DivX, Inc. and are used under license.

“DCDi” is a trademark of Faroudja, a division of Genesis

Microchip, Inc.

“HDMI”, the “HDMI” logo and “High Definition

Multimedia Interface” are trademarks or registered

trademark of HDMI Licensing LLC.

• When a disc becomes dirty, clean it with a cleaning

cloth. Wipe the disc from the center out. Do not wipe in

a circular motion.

• Do not use solvents such as benzine, thinner,

commercially available cleaners, or antistatic spray

intended for analog records.

Check your package to make sure it contains the following

items:

Patent information

This product incorporates copyright protection

technology that is protected by method claims of

certain U.S. patents and other intellectual property

rights owned by Macrovision Corporation and other

rights owners. Use of this copyright protection

technology must be authorized by Macrovision

Corporation, and is intended for home and other limited

viewing uses only unless otherwise authorized by

Macrovision Corporation. Reverse engineering or

disassembly is prohibited.

Cleaning discs

Supplied accessories

HDMI

POWER

DIMMER

MULTI 2CH

RANDOM

AUDIO DIRECT STANDBY

GROUP PAGE

PROG

REPEAT

SUBTITLE

SETUP

AUDIO ZO OM

ANGLE

PAUSE

STOP

SKIP

PLAY

A B

SLOW SEARCH

ENTERCLEAR

ON SCREENTOP MENU

MENU RETURN

ENTER

Audio pin cable

Batteries (x2)

(AAA, R03, UM-4)

Remote

control

Power cable

Video pin cable

5 En

FUNCTIONAL OVERVIEW

English

1 Disc tray

Load a disc in the disc tray.

2 STANDBY/ON

Turns on this unit or sets it to the standby mode.

3 HDMI indicator

Lights up green when an HDMI component is

recognized by this unit and the HDMI mode is set to

on.

Lights up orange when no HDMI component is

recognized by this unit while the HDMI mode is set to

on.

4 AUDIO DIRECT indicator

Lights up when you select the AUDIO DIRECT mode

by pressing AUDIO DIRECT on the remote control.

5 Front panel display

Displays playback information or settings.

6

Opens or closes the disc tray.

7 b/w

Searches backward.*

Moves to the previous chapter or track.

8 f/a

Searches forward.*

Moves to the next chapter or track.

9 p/e

Starts or pauses playback.

0 s

Stops playback.

* Press and hold the button for about two seconds.

FUNCTIONAL OVERVIEW

Front panel

HDMI AUDIO DIRECT

STANDBY

ON

3

6 7 8 092 4 5

1

6 En

FUNCTIONAL OVERVIEW

1 P.SCAN indicator

Lights up when the progressive scan function is

activated.

2 Playback mode indicators

Display the icon for the selected playback mode.

3 Decoder indicators

Display the icon for the selected internal decoder.

4 MULTI indicator

Lights up when playing the multi-channel audio

source.

5 D.MIX indicator (DVD-Audio only)

Lights up when playing the disc that allows down

mixing of the multi-channel audio source.

6 Disc indicators

Display the icon for the disc type.

7 Information display

Displays various information such as a title/chapter/

track number or elapsed playing time.

y

You can adjust the brightness of the front panel display using

DIMMER on the remote control.

Front panel display

MP3 JPEG

SVCD WMA

DVD AUDIO

SA-CD

DivX

P.SCAN TITLE GROUP CHP/ TRK MULTI D.MIX PROG. RANDOM ALL AD

B

252134

6

7

7 En

FUNCTIONAL OVERVIEW

English

1 AUDIO OUT (6ch discrete) jacks

Connect to the 6ch input jacks of your AV receiver.

2 DIGITAL (COAXIAL) jack

Connect to the coaxial input jack of your AV receiver.

3 REMOTE CONTROL (IN/OUT) connectors

Use in custom installations to transmit remote control

signals via cable connections.

4 REMOTE CONTROL (RS-232C) terminal

(U.S.A., Canada, U.K., Europe, and Russia

models only)

Use as an expansion terminal for commercial use.

Consult your dealer for details.

5 AV terminal

(U.K., Europe, and Russia models only)

Connect to SCART input terminal of your TV.

6 VIDEO OUT (VIDEO) jack

Connect to the composite video input jack of your AV

receiver.

7 MAINS

Connect the supplied power cable.

8 AUDIO OUT (MIXED 2CH) jacks

Connect to the audio input jacks of your AV receiver or

stereo system.

9 DIGITAL (OPTICAL) jack

Connect to the optical input jack of your AV receiver.

0 HDMI jack

Connect to the HDMI input jack of your HDMI

component.

q VIDEO OUT (S VIDEO) jack

Connect to the S-video input jack of your AV receiver.

w VIDEO OUT (COMPONENT) jacks

Connect to the component input jacks of your AV

receiver.

■ Remote control connectors and RS-232C terminal

The REMOTE CONTROL (IN/OUT) connectors and the REMOTE CONTROL (RS-232C) terminal are used in

custom installation. Keep the RS-232C switch set to OFF and do not connect any cables to these connectors during

normal use.

Caution: Do not touch the inner pins of the jacks on the rear panel of this unit. Electrostatic discharge

may cause permanent damage to this unit.

Rear panel

MIXED 2CH

L

R

L

R

AUDIO OUT DIGITAL REMOTE CONTROL VIDEO OUT

FRONT

COAXIAL

OPTICAL

RS 232C

HDMI

S VIDEO

P

R / CR

PB / CB

Y

VIDEO

MAINS

IN

OUT

SUBWOOFER

CENTER

SURROUND

COMPONENT

ON

OFF

AV

89 0qw

25 6 7134

(U.K., Europe, and Russia models)

8 En

FUNCTIONAL OVERVIEW

1 DIMMER

Selects from three different levels of brightness for the

front panel display: bright, dim and auto.

For auto setting, brightness is automatically set to low

only during playback.

2 HDMI

Switches between the HDMI resolution settings or

turns off the HDMI mode (see page 36).

y

• You can select the HDMI resolution by pressing HDMI on

the remote control repeatedly or by using the HDMI Video

setup menu.

• If you press HDMI on the remote control once, the

currently selected resolution setting is displayed in the top

left corner of the display and in the front panel display.

3 GROUP

Selects the DVD-Audio group (see page 25).

4 PAGE (+/–)

Selects the DVD-Audio still picture (see page 24).

5 Numeric buttons (0-9)

Select numbered items in the currently displayed

menu.

6 CLEAR

Clear the mode or setting (see page 20).

7 SETUP

Accesses or exits from the setup menu of this unit

(see page 28).

8 STOP (

7

)

Stops playback (see page 18).

9 PAUSE (

8

)

Pauses playback temporarily (see page 18).

Frame-by-frame playback (see page 18).

0 SKIP (

l22 / 33l)

Moves to the previous/next chapter or track.

q TOP MENU

Displays the top-level disc menu.

y

The title menu is displayed for discs with the title menu.

Remote control

HDMI

POWER

DIMMER

MULTI 2CH

RANDOM

AUDIO DIRECT STANDBY

GROUP PAGE

PROG

REPEAT

SUBTITLE

SETUP

AUDIO ZOOM

ANGLE

PAUSE

STOP

SKIP

PLAY

A B

SLOW SEARCH

ENTERCLEAR

ON SCREENTOP MENU

MENU RETURN

ENTER

1

2

3

4

5

6

7

8

9

0

q

w

e

r

t

y

u

i

o

p

a

s

d

f

g

h

j

k

l

;

9 En

FUNCTIONAL OVERVIEW

English

w Cursors ( / / /

)

Selects an item in the currently displayed menu.

ENTER

Confirms the menu selection.

e MENU

Accesses the menu of a disc (see page 20).

r SUBTITLE

Selects the subtitle language (see page 24).

t AUDIO

Selects the audio language or format (see page 24).

y POWER (

l

)

Turns on this unit (see page 15).

u STANDBY ( )

Sets this unit to the standby mode (see page 15).

i AUDIO DIRECT

Turns off the video output during audio disc playback

in order to improve audio quality. Press again to turn on

the video output. This function is not available when an

HDMI component is recognized by this unit.

In the AUDIO DIRECT mode, the front panel display

goes out. Once this unit is turned off, the AUDIO

DIRECT mode is cleared (only when an SA-CD disc is

played back, the mode is cleared if the disc tray is

opened/closed).

o MULTI

/ 2CH

Selects a sound mode: Stereo or Multi-channel.

Changes the SA-CD playback area (see page 25).

p PROG

Accesses the program setup menu to program disc

tracks or exit from its menu (see page 20).

a RANDOM

Plays tracks in random order (see page 19).

s REPEAT

Repeats the chapter, track, title, group or disc

(see page 19).

d A-B

Repeats a specific segment (see page 19).

f ENTER

Confirms the menu selection.

g SLOW

/ SEARCH (22 / 33)

Searches backward or forward (see page 19).

h PLAY (

3

)

Starts playback (see page 18).

j ON SCREEN

Accesses or exit from the on-screen display (OSD)

menu of this unit (see page 21).

Press twice during playback to access the Picture

Setting menu (see page 22).

k RETURN

Returns to the previous setup menu.

l ZOOM

Enlarges the video image (see page 23).

; ANGLE

Selects the DVD camera angle (see page 23).

y

Two ENTER buttons (w and f) act in the same way.

CONNECTIONS

10 En

Be sure to turn off this unit and unplug the power supply

cable, before you make or change connections.

• Depending on the component you want to connect, there

are various ways to make connections. Possible

connections are described below.

• Refer to the manuals supplied with your other

components as necessary to make the best connections.

• Do not connect this unit via your VCR. The video

quality could be distorted by the copy protection system.

• Do not connect the audio out jack of this unit to the

phono in jack of your audio system.

This unit has digital coaxial, digital optical, analog 6ch

discrete, and analog mixed 2ch output jacks. Connection

depends on the availability of audio jacks on your

component.

Connecting a stereo amplifier

Connect AUDIO OUT (MIXED 2CH) jacks of this unit to

the corresponding input jacks of your audio component

(such as a stereo amplifier) using the supplied audio pin

cable. You can connect a subwoofer to the

SUBWOOFER jack.

Connecting an AV receiver with 6ch/

multi-channel input

■ Analog connections

If you want to reproduce multi-channel Super Audio CD

(SA-CD) and DVD-Audio, connect AUDIO OUT (6ch

discrete) jacks of this unit to the corresponding input

jacks of your AV receiver using commercially available

audio pin cables.

CONNECTIONS

General notes on connections

Audio connections

REMOTE CONTROL

RS 232C

IN

OUT ON

OFF

AUDIO OUT

SUBWOOFER

CENTER

SURROUND

DIGITAL

COAXIAL

OPTICAL

MIXED 2CH FRONT

L

R

L

R

AV

HDMI

RL

CD / DVD

This unit (U.K., Europe, and Russia models)

Stereo

amplifier

Left

speaker

Right

speaker

Subwoofer

Audio pin cable

(supplied)

MIXED 2CH

REMOTE CONTROL

RS 232C

IN

OUT ON

OFF

AUDIO OUT

FRONT SUBWOOFER

CENTER

SURROUND

DIGITAL

COAXIAL

OPTICAL

L

R

L

R

AV

HDMI

RL

FRONT

RL

SURROUND

CENTER

SUBWOOFER

This unit (U.K., Europe,

and Russia models)

AV receiver

Speakers

11 En

CONNECTIONS

English

■ Digital connections

If you want to use the Dolby Digital, DTS, or MPEG

function on your AV receiver, connect DIGITAL

(OPTICAL) <A> or DIGITAL (COAXIAL) jack of

this unit to the corresponding input jacks of your AV

receiver using a commercially available digital optical or

digital coaxial cable.

• If you make a connection with <A> or , set [Digital Out]

to [All] (see “Setting the digital output” on page 31).

• If the audio format of the digital output does not match the

capabilities of your receiver, the receiver produces a distorted

sound or no sound at all. Make sure to select the appropriate

audio format from the menu screen on the disc.

Pressing AUDIO on the remote control once or more may

change not only the audio languages but also the audio format.

• SA-CD audio signals are not output from DIGITAL

(COAXIAL/OPTICAL) jacks.

• If you want to enjoy Dolby Digital, DTS, and MPEG formats,

you must connect this unit to an AV receiver that supports

these formats.

This unit has SCART, composite video, S-video, and

component video output jacks. If your AV receiver has

video output jacks, connect your receiver and then your

TV so that you can use one TV for several different video

sources (LD, VCR, etc.) by simply switching the input

source selector on your receiver.

Use the one that corresponds to the input jacks on the

component to be connected.

Notes

MIXED 2CH

REMOTE CONTROL

RS 232C

IN

OUT ON

OFF

AUDIO OUT

FRONT SUBWOOFER

CENTER

SURROUND

DIGITAL

COAXIAL

OPTICAL

L

R

L

R

AV

HDMI

COAXIAL

IN

OPTICAL

IN

<A>

This unit (U.K.,

Europe, and

Russia models)

AV receiver

Speakers

Video connections

O

NTROL VIDEO OUT

S VIDEO

P

B / CB

Y

P

R / CR

VIDEO

COMPONENT

AV

HDMI

RS 232C

S-VIDEO

IN

VIDEO

IN

VIDEO

OUT

VIDEO

IN

S VIDEO

OUT

COMPONENT

VIDEO OUT

COMPONENT

VIDEO IN

S VIDEO

IN

PR/CR YPB/CB

COMPONENT VIDEO IN

This unit (U.K., Europe, and Russia models)

Video

pin cable

(supplied)

AV

receiver

TV

12 En

CONNECTIONS

■ Composite video jack <A>

Connect VIDEO OUT (VIDEO) jack of this unit to the

video input jack of your AV receiver, and then to that of

your TV using the supplied video pin cable.

■ S-video jack

S-video connections achieve a clearer picture than

composite video connections by transmitting video signals

on separate wires for luminance (Y) and chrominance (C).

Connect VIDEO OUT (S VIDEO) jack of this unit to

S-video input jack of your AV receiver, and then to that of

your TV using a commercially available S-video cable.

■ Component video jacks <C>

Component video connections achieve higher fidelity

color reproduction than S-video connections by

transmitting video signals on separate wires for luminance

(Y: green) and chrominance (P

B: blue, PR: red). Connect

VIDEO OUT (COMPONENT) jacks of this unit to the

component input jacks of your AV receiver, and then to

those of your TV using a commercially available

component cable. Observe the color of each jack when

you make connections.

If your receiver does not have component output jacks,

you can achieve a better video image by connecting the

component output jacks of this unit directly to the

component input jacks of your TV.

■ SCART terminal <D>

(U.K., Europe, and Russia models only)

If your TV has only a terminal for video input, you can

connect the TV directly to this unit.

Connect AV terminal of this unit to SCART input terminal

of your TV using a commercially available SCART cable.

• Ensure that the “TV” indication on SCART cable is connected

to the TV set and “DVD” indication on SCART cable is

connected to this unit.

• S-video signal is not output at AV terminal. See page 36 for

SCART video setting.

HDMI (High-Definition Multimedia Interface) provides

high quality digital audio and video on a single

connection.

Connect the HDMI jack of this unit to an HDMI input jack

of your AV receiver, and then to that of your TV using a

commercially available HDMI cable.

If your receiver does not have an HDMI input jack, you

can achieve a better video image by connecting the HDMI

jack of this unit directly to the HDMI input jack of your

TV.

• You need to make appropriate audio connections if the

connected component does not input audio signals (see

page 10).

• This unit is not compatible with HDCP-incompatible HDMI or

DVI components.

• You need a commercially available HDMI/DVI conversion

cable when you connect this unit to other DVI components. In

this case, you need to use another audio connection to this

connection because the HDMI jack of this unit does not output

any audio signals.

• Do not disconnect or turn off the power of the HDMI/DVI

component connected to the HDMI jack of this unit while data

is being transferred. Doing so may disrupt playback or cause

noise.

y

When connecting an HDMI component, refer to the manual

supplied with your component.

Notes

HDMI connection

Notes

MIXED 2CH

REMOTE CONTROL

RS 232C

IN

OUT ON

OFF

AUDIO OUT

FRONT SUBWOOFER

CENTER

SURROUND

DIGITAL

COAXIAL

OPTICAL

L

R

L

R

AV

HDMI

IN

This unit (U.K., Europe, and

Russia models)

AV receiver

Speakers

HDMI OUT

HDMI IN

TV

13 En

CONNECTIONS

English

■ HDMI video output

This unit is compatible with the following video formats:

480p/60 Hz, 576p/50 Hz, 720p/50 Hz, 60 Hz, 1080i/50 Hz, 60 Hz, and 1080p/50 Hz, 60 Hz.

• You need to select one of the HDMI resolution settings by pressing HDMI on the remote control repeatedly or by using the HDMI

Video setup menu (see page 36).

• Depending on the connected DVI component, black and white in the image may not be distinct. In this case, adjust the picture setting

of the connected DVI component.

■ HDMI audio output

*1:If the connected HDMI component does not support bitstream signals (Dolby Digital, DTS, and MPEG), the audio

output is automatically changed from bitstream signals to PCM signals.

*2:If the HDMI component does not support multi-channel audio signals, the audio output is automatically changed

from PCM multi-channel signals to PCM stereo signals and 48 kHz/16 bits signals or less.

*3:If the audio source is prohibited from downmixing, the front L/R channel audio and 48 kHz/16-bit signals or less are

output instead of downmixed stereo.

*4:If the connected component does not support more than 48 kHz, the audio output is automatically changed to 48 kHz/

16-bit signals or less.

• You need to set HDMI Audio (see page 37).

• SA-CD signals cannot be output using HDMI. Make an analog connection to listen to SA-CD (see page 10).

Notes

Audio format

Analog output

setting

HDMI Audio

Auto*

1

PCM Off

DVD-Video

Dolby Digital

Multi-channel

Dolby Digital

PCM multi*

2

Off

Stereo PCM 2ch

DTS

Multi-channel

DTS

PCM multi*

2

Stereo PCM 2ch

MPEG

Multi-channel

MPEG

PCM multi*

2

Stereo PCM 2ch

PCM 2ch*

4

Multi-channel/Stereo PCM 2ch PCM 2ch

DVD-Audio

Multi

Multi-channel PCM (PPCM) multi*

2,3

PCM (PPCM) multi*

2,3

Stereo PCM (PPCM) 2ch*

3

PCM (PPCM) 2ch*

3

2ch*

4

Multi-channel/Stereo PCM (PPCM) 2ch PCM (PPCM) 2ch

CD/MP3/

WMA/DivX

®

2ch Multi-channel/Stereo PCM 2ch PCM 2ch

DTS-CD

Multi

Multi-channel

DTS

PCM multi*

2

Stereo PCM 2ch

2ch Multi-channel/Stereo PCM 2ch

VCD 2ch Multi-channel/Stereo PCM 2ch PCM 2ch

SVCD

Multi

Multi-channel

MPEG

PCM multi*

2

Stereo PCM 2ch

2ch Multi-channel/Stereo PCM 2ch

SA-CD Multi/2ch Multi-channel/Stereo – – –

Notes

14 En

CONNECTIONS

After all other connections are complete, plug the supplied

power cable into MAINS of this unit and then plug the

power cable to an AC outlet.

Connecting the power cable

MAINS

To an AC

outlet

15 En

GETTING STARTED

English

y

If the settings you have made are inappropriate, you can always reset all options and your personal settings to the initial factory settings.

For details, see “Resetting the system” on page 30.

1 Press the part and slide the battery

compartment cover off.

2 Insert the two supplied batteries (AAA, R03,

UM-4), following the indications (+/–) on the

inside of the compartment.

3 Slide the cover back until it snaps into place.

• Insert batteries correctly according to the polarity markings

(+/–). The batteries inserted in the opposite direction may leak.

• Replace the exhausted batteries immediately with new ones to

prevent a leakage.

• Remove the batteries from the compartment if the remote

control is not used for more than a month.

• If the batteries have leaked, dispose of them immediately.

Avoid touching the leaked material or letting it come into

contact with clothing, etc. Clean the battery compartment

thoroughly before installing new batteries.

• Do not use old batteries together with new ones.

• Do not use different types of batteries (such as alkaline and

manganese batteries) together. Read the packaging carefully as

these different types of batteries may have the same shape and

color.

• Dispose of the batteries correctly in accordance with your local

regulations.

Using the remote control

Use the remote control within 6 m (20 ft approx.) of this

unit and point it toward the remote control sensor.

• Do not spill water or other liquids on the remote control.

• Do not drop the remote control.

• Do not leave or store the remote control in the following types

of conditions:

– places of high humidity, such as near a bath

– places of high temperature, such as near a heater or stove

– places of extremely low temperature

– dusty places

1 Make sure that the power cable is connected to

an AC outlet.

2 Turn on your TV and AV receiver.

3 Select the appropriate input source of the AV

receiver connected to this unit. Refer to the

manual supplied with your AV receiver for

details.

4 Press STANDBY/ON on the front panel or

POWER (

l

) on the remote control to turn on

this unit.

➜ The front panel display lights up.

5 Set the TV to the correct Video IN channel (e.g.,

EXT1/2, AV1/2, AUDIO/VIDEO, etc. Refer to

the manual supplied with your TV for details).

➜ The default screen appears on the TV.

GETTING STARTED

Step 1: Inserting batteries into

the remote control

Notes

1

3

2

Notes

Step 2: Turning on the power

within 6m

(20 ft approx.)

16 En

GETTING STARTED

This unit is compatible with both NTSC and PAL video

formats. Select the color system that matches your TV.

y

• Press RETURN to display the previous menu.

• Press SETUP to exit from the setup menu.

1 Press SETUP.

➜ The setup menu appears.

2 Press / repeatedly to select [VIDEO],

and then press ENTER.

➜ [VIDEO] menu appears.

3 Press / repeatedly to highlight [TV

Type].

4 Press / to select one of the options below.

PAL

Select this if the connected TV is a PAL system TV. It will

change video signals of NTSC discs and output them in

PAL format.

NTSC

Select this if the connected TV is an NTSC system TV. It

will change video signals of PAL discs and output them in

NTSC format.

MULTI

Select this if the connected TV is compatible with both

NTSC and PAL formats (such as a multi-system TV). The

output format will be in accordance with the video signals

of the disc.

• Before changing the current TV Standard setting, ensure that

your TV supports the selected TV type system.

• If you play an NTSC-formatted disc with the [PAL] setting or a

PAL-formatted disc with the [NTSC] setting, the video quality

may deteriorate.

• When [TV Type] is set to [MULTI], this unit may change the

HDMI resolution unwantedly. In this case, try the [NTSC] or

[PAL] setting.

Step 3: Setting a TV type

1/2

SETUP

GENERAL

AUDIO

SPEAKER

VIDEO

HDMI

DISC

DVD-Audio mode

SA-CD mode

OSD Language

Parental Rating

Parental Password

Screen Saver

Auto Power Off

Sleep Timer

Select : Enter

Move :

Return

1/1

VIDEO

TV Display

TV Type

Wide Screen Format

Black Level*1

Closed Caption*1

Still Mode

Component

Scart Video Out*2

Select : Enter

Move :

16:9

PAL

Off

Field

Interlaced

RGB

Return

*1: [Black Level] and [Closed Caption] are only for U.S.A. and

Canada models.

*2: [Scart Video Out] is only for U.K., Europe, and Russia

models.

Notes

1/1

VIDEO

TV Display

TV Type

Wide Screen Format

Black Level*1

Closed Caption*1

Still Mode

Component

Scart Video Out*2

Select : Enter

Move :

Return

16:9

PAL

Off

Field

Interlaced

RGB

17 En

GETTING STARTED

English

You can select your own preferred language settings. This

unit will automatically switch to your preferred language

for you whenever you load a disc. If the language selected

is not available on the disc, the default language of the disc

will be used instead. The OSD (On-Screen Display)

language in the system menu will remain once selected.

y

• Press RETURN to display the previous menu.

• Press SETUP to exit from the setup menu.

Setting the OSD (On-Screen Display)

language

1 Press SETUP.

➜ The setup menu appears.

2 Press / repeatedly to highlight

[GENERAL], and then press ENTER.

➜ [GENERAL] menu appears.

3 Press / repeatedly to highlight [OSD

Language].

4 Press / to select a language.

Setting the audio, subtitle and disc

menu languages

1 Press SETUP.

➜ The setup menu appears.

2 Press / repeatedly to highlight [DISC],

and then press ENTER.

➜ [DISC] menu appears.

3 Press / repeatedly to highlight [AUDIO

Language] or [Subtitle Language] or [DVD

Menu Language].

4 Press / to select a language.

■ To select the language not in the list:

1 Select [Others] under [AUDIO Language] or

[Subtitle Language] or [DVD Menu Language].

2 Press ENTER.

3 Use the numeric buttons (0-9) to enter the

4-digit language code (see “LANGUAGE CODE

LIST” on page 39).

4 Press ENTER.

Step 4: Setting a language

preference

1/2

GENERAL

DVD-Audio mode

SA-CD mode

OSD Language

Parental Rating

Parental Password

Screen Saver

Auto Power Off

Sleep Timer

Select : Enter

Move :

DVD-Audio

SA-CD

English

Level 8

- - - -

On

Mode 1

Off

Return

1/1

DISC

AUDIO Language

Subtitle Language

DVD Menu Language

Angle Mark

PBC

Time Interval

Select : Enter

Move :

Return

English

Off

English

On

Off

3 sec

DISC OPERATION

18 En

• Unless otherwise specified, all operations described here are

carried out using the supplied remote control.

• If the inhibition icon ( or “Prohibit”) appears on the TV

screen when you press a button, the function for that button is

not available on the current disc or at the current time.

• Depending on the DVD or Video CD disc, some operations

may operate differently or be restricted.

• Do not push on the disc tray or put any objects other than discs

on the disc tray. Doing so may cause the disc unit to

malfunction.

1 Press on the front panel to open the disc tray.

2 Place a disc in the disc tray with the printed side

up.

3 Press again to close the disc tray.

➜ After recognizing the disc, this unit starts to play

back automatically.

• If you press PLAY (

3

) when the disc tray is

opened, the disc tray closes and playback starts

automatically.

• Depending on the disc, the disc reading time may

exceed 30 seconds due to the complexity of the

directory/file configuration.

4 To stop playback, press STOP (

7

).

➜ “RESUME” appears in the front panel display.

5 To resume playback, press PLAY (

3

).

➜ The disc is played back from the last stopping

point.

y

As long as you do not eject a disc, you can resume playback even

if you turn off this unit.

6 To cancel resume mode, press STOP (

7

)

twice.

• It may not be possible to play certain MP3/JPEG/DivX

®

discs

due to the configuration and characteristics of the disc or the

recording conditions.

• When you play a down mix prohibited disc, “NO DOWN

MIX” lights in the front panel display.

Pausing playback

1 During playback, press PAUSE (

8

).

➜ Playback is paused and the sound is muted.

2 Press PAUSE (

8

) again to select the next

picture frame (frame-by-frame playback).

3 To resume normal playback, press PLAY (

3

).

Selecting a track/chapter

Press SKIP (l22 / 33l) or use the numeric

buttons (0-9) and ENTER to select a track/

chapter number.

• You can move to the top of the currently playing

track/chapter by pressing SKIP (l22 ) once, and

move to the previous track/chapter by pressing

SKIP (

l22 ) twice.

• During repeat playback of a track/chapter, press

SKIP (

l22 / 33l) to replay the same track/

chapter.

DISC OPERATION

Notes

Basic operation

MULTI 2CH

RANDOM

GROUP PAGE

PROG

REPEAT

SETUP

PAUSE

STOP

SKIP

PLAY

A B

SLOW SEARCH

ENTERCLEAR

ON SCREENTOP MENU

STOP ( )

PAUSE ( )

SKIP ( / )

SLOW/SEARCH

( / )

PLAY ( )

Numeric

buttons (0-9)

Notes

ページが読み込まれています...

Yamaha DVD-S1800 取扱説明書

Yamaha DVD-S1800 取扱説明書

他の言語で

関連論文

その他のドキュメント