Sony NW-E50 取扱説明書

NW-E50/E70/E90 GB/CS 3-267-071-14(1)

NW-E50/E70/E90

Operating Instructions

3-267-071-14(1)

Portable IC Audio Player

Network Walkman

“WALKMAN” is a registered trademark of

Sony Corporation to represent Headphone

Stereo products.

is a trademark of Sony

Corporation.

GB

CS

2-GB

NW-E50/E70 GB/CS 3-267-071-14(1)

WARNING

To prevent fire or shock hazard, do not

expose the unit to rain or moisture.

Do not install the appliance in a confined

space, such as a bookcase or built-in cabinet.

To prevent fire, do not cover the ventilation of the

apparatus with news papers, table cloths, curtains,

etc. And don’t place lighted candles on the

apparatus.

To prevent fire or shock hazard, do not place

objects filled with liquids, such as vases, on the

apparatus.

Note on installation

If you use the unit at a place subject to static or electrical

noise, the track’s transferring information may be

corrupted. This would prevent successful transferring

authorization on your computer.

This manual explains how to operate your

Network Walkman and how to use the MP3

file manager (pre-installed software). For

details on how to use the SonicStage

(supplied software), refer to the SonicStage

operating instructions.

Notice for users

On the supplied software

• Copyright laws prohibit reproducing the software or the

manual accompanying it in whole or in part, or renting

the software without the permission of the copyright

holder.

• In no event will SONY be liable for any financial

damage, or loss of profits, including claims made by

third parties, arising out of the use of the software

supplied with this player.

• In the event a problem occurs with this software as a

result of defective manufacturing, SONY will replace

it.

However, SONY bears no other responsibility.

• The software provided with this player cannot be used

with equipment other than that which is so designated.

• Please note that, due to continued efforts to improve

quality, the software specifications may be changed

without notice.

• Operation of this player with software other than that

provided is not covered by the warranty.

• Depending on the type of the text and characters, the

text shown on SonicStage and MP3 File Manager may

not be displayed properly on device. This is due to:

–The capability of the connected player.

–The player is not functioning normally.

–The ID3 TAG information for the track is

written in the language or the character that is

not supported by the player.

OpenMG and its logo are trademarks of Sony

Corporation.

SonicStage and SonicStage logo are trademarks or

registered trademarks of Sony Corporation.

ATRAC, ATRAC3, ATRAC3plus and their logos are

trademarks of Sony Corporation.

Microsoft, Windows and Windows Media are trademarks

or registered trademarks of Microsoft Corporation in the

United States and/or other countries.

All other trademarks and registered trademarks are

trademarks or registered trademarks of their respective

holders.

In this manual,

TM

and ® marks are not specified.

(NW-E50/E70):Q/YXPD123-2004

(NW-E90):Q/YXPD164-2004

NW-E50/E70/E90 GB/CS 3-267-071-14(1)

3-GB

Table of Contents

GB

Overview ............................................ 4

What you can do with your

Network Walkman .................... 4

Other features ................................. 5

Step 1: Checking the package

contents ........................................ 6

Step 2: Inserting the battery................ 7

Locating controls ................................ 8

Front side ........................................ 8

Rear side ......................................... 8

Display ............................................ 9

Basic Operations

Transferring audio files from the

computer to your Network

Walkman .................................... 10

Note on playing songs with a limited

playing period

(Timeout contents).................. 11

Note on playing songs with a limited

playing count .......................... 11

Listening to music with your Network

Walkman .................................... 12

What is the Group function? ......... 13

On other operations ...................... 13

Advanced Operations

Repeat mode ..................................... 14

Selecting the repeat mode ............. 14

Playing the tracks repeatedly

(Track Repeat) ........................ 15

Playing a specified section

repeatedly (A-B Repeat) ......... 15

Playing specified sentences

repeatedly

(Sentence Repeat) ................... 16

Setting the repeat counts ............... 17

Changing the display mode .............. 17

Selecting the group display

mode ....................................... 18

Adjusting treble and bass

(Digital sound preset) ................ 19

Selecting the Sound quality .......... 19

Adjusting the sound quality .......... 19

Locking the controls (HOLD) .......... 20

Storing non-audio data ..................... 21

Adjusting the settings of your

Network Walkman

Adjusting the time setting of your

Network Walkman to a computer’s

built-in clock .............................. 22

Adjusting the current time setting

(DATE-TIME) ............................ 23

Limiting the volume (AVLS) ............ 24

Setting the volume using the preset

volume function ......................... 24

Setting a volume level of the

preset mode ............................ 24

Switching to the manual mode ..... 25

Turning off the beep sound

(BEEP) ....................................... 26

Changing the backlight setting ......... 26

Other functions

Regrouping songs (REGROUP) ....... 27

Formatting memory (FORMAT) ...... 28

Other Information

Precautions ....................................... 29

Troubleshooting ................................ 30

To reset the player ......................... 30

What happened? ........................... 30

Messages ....................................... 33

Specifications ................................... 34

Glossary ............................................ 35

Menu list ........................................... 36

MP3 file manager software

operation

What you can do with the MP3 file

manager ...................................... 37

Transferring MP3 audio files from the

computer to your Network

Walkman .................................... 37

Display of MP3 file manager ........... 39

Erasing audio file.............................. 40

Ordering audio file ........................... 40

Index ....................................... 41

4-GB

NW-E50/E70/E90 GB/CS 3-267-071-14(1)

Overview

1 Store digital

audio files on

your computer.

2 Transfer files to

your Network

Walkman.

3 Enjoy music with

your Network

Walkman.

USB connection

MP3, WAV and

Windows

®

Media

Format Audio Files

Audio CDs

EMD (Electric Music

Distribution) Services

Download the

latest audio

files!

Store favorite

songs!

What you can do with your Network Walkman

First, you need to install the “SonicStage” software into your computer (MP3 file manager software is pre-

installed in your Network Walkman). You can easily transfer digital audio files from your computer to the

built-in flash memory and carry it anywhere to enjoy.

When you transfer MP3 format audio

files to your Network Walkman, use MP3

file manager software (pre-installed

software) to transfer and store them as

MP3 format audio files.

You can display the data stored in the built-in

flash memory using Windows Explorer when

your Network Walkman is connected to the

computer. However, an MP3 format audio file

cannot be played back if you drag or copy the

file directly on the Windows Explorer screen.

When you transfer an MP3 format audio file to

your Network Walkman, be sure to use the

MP3 file manager software (see page 37).

NW-E50/E70/E90 GB/CS 3-267-071-14(1)

5-GB

NOTES:

• The recorded music is limited to private use only. Use of the music beyond this limit requires permission of the

copyright holders.

• Sony is not responsible for incomplete recording/downloading or damaged data due to problems of the Network

Walkman or computer.

Other features

• Compact size, light weight, skip-proof operation, high portability.

• The pre-installed MP3 file manager software enables you to transfer MP3 format audio files to your

Network Walkman and listen to them with your Network Walkman as MP3 format files.

• Continuous playback time with a battery

NW-E50/NW-E70/NW-E90: Approximately 70*

1

hours

• Recording time*

2

NW-E50: 128MB built-in flash memory, more than 5 hours 50 minutes.

NW-E70: 256MB built-in flash memory, more than 11 hours 40 minutes.

NW-E90: 512MB built-in flash memory, more than 23 hours 20 minutes.

• The supplied SonicStage software enables you to record songs from audio CDs to the hard disk of your

computer using the ATRAC3plus format (high sound quality, high compression).

• Sentence Repeat: Useful function for learning a foreign language.

• High-speed data transfer using the dedicated USB cable.

• Backlight LCD screen: song titles and artist names can be displayed.

• Group function: you can select songs to be played by album.

• Storage function: you can store a variety of data as well as audio files.

*

1

Differs according to the data format. In this case, the figure for the battery duration is when continuously playing

ATRAC3 format audio files.

*

2

Differs according to the bit rate when recording. In this case, the figure for the recordable time is when recording at

48kbps ATRAC3plus format.

6-GB

NW-E50/E70/E90 GB/CS 3-267-071-14(1)

OPEN

Serial NO.

Serial Number

G

r

o

u

p

M

o

d

e

Please check the accessories in the package.

NW-E50:

• Network Walkman (1)

• Headphones (1)

NW-E70:

NW-E90

• Network Walkman (1)

• Headphones (1)

• Earbuds (Size S, L) (1)

• Dedicated USB cable (1)

Earbuds (Size S)

Earbuds (Size L)

Step 1: Checking the package contents

For the customers of NW-E70/E90

Notes

The supplied headphones are a close-up design to

create Powerful Bass Sound. Do not use

headphones while driving.

• Do not use headphones while driving, cycling, or

operating any motorized vehicle.

• It can also be potentially dangerous to play your

headphones at high volume while walking,

especially at pedestrian crossings. You should

exercise extreme caution or discontinue use in

potentially hazardous situations.

When you wear the headphones, you may hear noise,

such as the cord rubbing against your clothes. This is

not a malfunction.

• Carrying pouch (1)

• Neck strap (1)

• Extension headphone cord (1)

• CD-ROM (1)

• Operating instructions (1)

• SonicStage operating instructions (1)

About the Serial Number

The serial number provided for your device is

required for the customer registration. The number

is on the rear side of your Network Walkman.

G

r

o

u

p

M

o

d

e

Record the serial number in the space provided

below. Refer to it whenever you call upon your

Sony dealer regarding this product.

Serial No. _____________________

NW-E50/E70/E90 GB/CS 3-267-071-14(1)

7-GB

Step 2: Inserting the battery

Insert the LR03 (size AAA) alkaline battery with correct polarity. Be sure to insert it from the E side as

illustrated.

OPEN

If the battery compartment lid is accidentally

detached, attach it as illustrated.

Battery duration

*

ATRAC3 format: Approximately 70 hours

ATRAC3plus format: Approximately 60 hours

MP3 format: Approximately 50 hours

* The battery life may be shorter due to operating

conditions and the temperature of the location.

On the remaining battery indication

The battery icon in the display changes as shown below.

If “LOW BATT” is displayed in the display, you need to

change the battery.

Notes

If you do not use the battery correctly, it may become

damaged from leakage and corrosion. For best results:

– Use the alkaline battery.

– Make sure the polarity is correct.

– Do not charge a dry cell battery.

– Remove the battery, if you do not intend to use the

player for an extended period of time.

– If you have battery leakage, replace with a new battery

after cleaning the battery compartment.

low battery change the

battery

8-GB

NW-E50/E70/E90 GB/CS 3-267-071-14(1)

Locating controls

For details about each part, refer to the pages in parentheses.

Rear sideFront side

7 Headphone jack (page 12)

8 Nx button

(page 12 to 20, 22 to 28)

9 Shuttle switch

(page 13 to 20, 22 to 28)

0 VOLUME +/– button (page 12, 24)

qa HOLD (Locking controls) switch

(page 12, 20)

qs USB jack (page 10, 37)

qd Battery compartment (page 7)

G

r

o

u

p

M

o

d

e

1

2

3

4

5

6

7

8

9

0

qz

OPEN

qs

qd

1 Strap hole for attaching the strap

2 REPEAT/SOUND button

(page 15 to 16, 19)

3 MENU button (page 14, 17 to 20, 22 to 28)

You can switch to the Time display by

pressing the MENU button for a while.

4 GROUP button (page 13, 18)

5 Display (page 9, 15, 33)

For details on the display and icons, refer to

page 9.

6 ACCESS lamp (page 10, 38)

NW-E50/E70/E90 GB/CS 3-267-071-14(1)

9-GB

1

Text/graphic information display (page 14)

Displays track number, track name, current date

and time (page 17 to 23), MESSAGE (page 11,

33) and menu.

Press the MENU button to switch the display

mode. For details, refer to “Changing the

display mode” on page 17.

2 Repeat mode indication (page 14)

The current repeat mode is displayed.

3 AVLS indication (page 24)

The indication appears while the AVLS

function is activated.

4 Digital sound preset indication

(page 19 to 20)

The current sound setting is displayed.

5 Remaining battery indication (page 7)

The remaining battery power is displayed.

Display

NW-E50/E70/E90 GB/CS 3-267-071-14(1)

10-GB

Basic Operations

Transferring audio files from the computer

to your Network Walkman

You can transfer ATRAC3, ATRAC3plus format audio files from the computer to your Network Walkman

using the installed SonicStage software. Follow the procedure below.

You can also transfer MP3 format audio files, using the MP3 file manager that is pre-installed in your

Network Walkman. For details, refer to “MP3 file manager software operation” on page 37.

1 Install the SonicStage software in your computer using the supplied CD-ROM.

Follow step 1 only for the first time when you connect your Network Walkman to the computer.

For details, refer to the SonicStage operating instructions.

2 Import audio files into the SonicStage software.

For details, refer to the manual “SonicStage operating instructions.”

3 Connect your Network Walkman to your computer.

Connect the small connector of the dedicated USB cable into the USB jack on the Network Walkman,

then the large connector to a USB port on your computer.

“CONNECT” appears in the display.

Notes

• The ACCESS lamp blinks while your Network Walkman accesses the computer.

• Do not disconnect the USB cable when the ACCESS lamp is blinking. The data being transferred may be destroyed.

• Use of your Network Walkman with a USB hub or a USB extension cable is not guaranteed. Always connect your

Network Walkman to the computer directly using the dedicated USB cable.

• Some USB devices connected to the computer may interfere with the proper operation of your Network Walkman.

• The control buttons on your Network Walkman are all disabled while it is connected to a computer.

• You can display the data stored in the built-in flash memory using Windows Explorer when your Network Walkman is

connected to the computer.

Note

Before connecting your Network Walkman to the computer for the first time, be sure to install the

“SonicStage” software from the supplied CD-ROM in your computer. Even if the SonicStage software

is already installed, you need to install the SonicStage software supplied with this Network Walkman

before connecting your Network Walkman to the computer (update programs may be available).

OPEN

O

PEN

Dedicated USB cable (supplied)

to a USB portto the USB jack

ACCESS lamp

NW-E50/E70/E90 GB/CS 3-267-071-14(1)

11-GB

Basic Operations

4 Transfer audio files to your Network Walkman.

For information on transferring audio files to the built-in flash memory, refer to the separate manual

“SonicStage operating instructions.”

z Tip

For information on transferring audio files back to the computer, refer to the manual “SonicStage operating instructions”

or online Help for the SonicStage software.

Note on playing songs with a limited playing period

(Timeout contents)

Some songs distributed via the Internet (EMD service) have a limited playing period.

If you try to play an expired song, “EXPIRED” blinks and the next song will be played after a moment.

In addition, an expired song cannot be played using the SonicStage software, or transferred to your

Network Walkman. Delete any songs as needed.

Note on playing songs with a limited playing count

Your Network Walkman does not support contents with a limited playing count.

When you try to play a song with a limited playing count, “EXPIRED” will be displayed and the song will

not be played.

NW-E50/E70/E90 GB/CS 3-267-071-14(1)

12-GB

1 Connect the headphones.

2 Start playback.

Listening to music with your Network

Walkman

Please insert the battery before use (see page 7).

Note

When using Network Walkman, be sure do disconnect it from the computer.

G

r

o

u

p

M

o

d

e

1 Press the Nx button.

2 Press the

VOLUME

+/– button to adjust

the volume.

HOLD switch

G

o

u

p

M

o

d

e

to i jack

G

o

u

p

M

o

d

e

to i jack

Headphones

extension

cord

How to install the earbuds correctly

For the customers of NW-E70/E90

If the earbuds do not fit your ears correctly, low

bass sound may not be heard. To enjoy better

sound quality, adjust the earbuds position to sit

on your ears comfortably or push them into the

inside of your ears so that they fit your ears

snugly. At purchase, M size earbuds are

installed. If the earbuds do not fit your ears, try

one of the other supplied sizes S or L.

z Tip

If your Network Walkman is not operated for 10 seconds

while in stop mode, the display automatically turns off.

When scrolling track titles, etc., the display turns off after

scrolling is finished.

When the normal playback mode is selected,

playback stops automatically after the last song is

played.

If playback does not start

Make sure that the HOLD switch is set to off

(page 20).

To stop playback

Press the Nx button.

To adjust the volume

The volume can be set in the PRESET and MANUAL

mode (page 24 to 25).

To use the headphones extension cord

NW-E50/E70/E90 GB/CS 3-267-071-14(1)

13-GB

Basic Operations

To

Skip to the beginning

of the next track/

group*

1

Skip to the beginning

of the current track/

group*

1

Fast-forward*

2

Fast-rewind*

2

*

1

Rotating and holding of the Shuttle switch during stop

mode allows you to skip to the beginning of the next

(current and previous) track/group continuously.

*

2

Fast-forward and fast-rewind speed become faster if

the operation is continued for five seconds.

What is the Group function?

The Group function enables you to select favorite music conveniently on your Network Walkman. You can

transfer to audio files or play songs by album or artist using the Group function.

Tra ck1

Group1

Tra ck2

Tra ck3

Tra ck1

Tra ck2

Tra ck3

Tra ck1

Tra ck2

Tra ck3

Group2

Group3

Tra ck1

Tra ck2

Tra ck3

Tra ck1

Tra ck2

Tra ck3

Tra ck1

On other operations

z Tip

You can switch to the Group mode by pressing the Group

mode button.

Shuttle switch operation

Rotate the Shuttle switch

clockwise once (+/>).

Rotate the Shuttle switch

counterclockwise once

(./–).

Rotate the Shuttle switch

clockwise (

+/>

) and hold

it.

Rotate the Shuttle switch

counterclockwise (./–)

and hold it.

• The track number is the order of songs in each group.

• You can switch between Track Name mode and Group

mode by pressing the GROUP button.

• In the Group mode, group names are displayed instead

of track names. In addition, any shift operations, such

as Skip or Repeat, are performed by group.

Transferring by group

The audio files transferred to the SonicStage software are

always grouped when transferred to the built-in flash

memory.

z Tip

A group created by SonicStage software has priority over

one created by MP3 file manager software on your

Network Walkman.

G

r

o

u

p

M

o

d

e

o

d

e

Shuttle switch

Press

(Confirm)

Nx button

MENU button

to (+/>)

to (./–)

NW-E50/E70/E90 GB/CS 3-267-071-14(1)

14-GB

Advanced Operations

Repeat mode

There are three types of repeat mode: Track

Repeat, A-B Repeat and Sentence Repeat.

• Track Repeat (TRK Rep)

This mode plays back tracks repeatedly in the

following five ways.

Track Repeat mode

All Repeat

Single Repeat

Group Repeat

Group Shuffle

Repeat

All Groups Shuffle

Repeat

• A-B Repeat (A-B Rep)

This mode plays back the specified section in a

track repeatedly.

• Sentence Repeat (SENTENCE Rep)

This mode plays back voice data within a

specified section in a track repeatedly.

Selecting the repeat

mode

1 Press the MENU button in stop mode.

The menu screen is displayed.

REPEAT MODE>

Operation

All tracks repeatedly

Current track repeatedly

Current group repeatedly

in random order

All groups repeatedly

in random order

G

r

o

u

p

M

o

d

e

o

d

e

Shuttle switch

Press

(Confirm)

Nx button

MENU button

to (+/>)

to (./–)

2 Rotate the Shuttle switch to select

“REPEAT MODE >” and press the

Nx button to confirm.

3 Rotate the Shuttle switch to select a

desired repeat mode and press the Nx

button to confirm.

TRKRep

You can choose one mode among “TRK

Rep,” “A-B Rep” and “SENTENCE Rep.”

4 Press the MENU button.

The display returns to the normal screen.

You can operate each repeat mode you

selected, as refer to the below.

• TRK Rep: see “Playing the tracks

repeatedly (Track Repeat).”

• A-B Rep: see “Playing a specified section

repeatedly (A-B Repeat).”

• SENTENCE Rep: see “Playing specified

sentences repeatedly (Sentence Repeat).”

To cancel the Menu mode

Select [RETURN] in the menu screen or press the MENU

button.

Notes

• The display automatically returns to the normal

playback screen if you do not operate any button for 60

seconds.

• When there is no audio files in the built-in flash

memory, you cannot set any repeat mode.

• When you connect the Network Walkman to your

computer, the selected desired mode will be cancelled.

• You can select repeat mode only in stop mode.

NW-E50/E70/E90 GB/CS 3-267-071-14(1)

15-GB

Advanced Operations

Playing the tracks

repeatedly (Track

Repeat)

The Track Repeat mode is changed by pressing

the REPEAT/SOUND button. You can check the

current Track Repeat mode with the icon of the

display.

Select the Track Repeat mode (TRK

Rep) first (page 14).

Then, press the REPEAT/SOUND

button repeatedly to select the repeat

mode you want.

Each press changes the Track Repeat icon as

follows:

Track Repeat icon

G

r

o

u

p

M

o

d

e

REPEAT/

SOUND button

Playing a specified

section repeatedly (A-B

Repeat)

While playing a track, you can set the start point

(A) and end point (B) for a section you wish to

play repeatedly.

1 Select the A-B Repeat mode (A-B Rep)

(page 14).

2 Press the Nx button to start playback.

3 Press the REPEAT/SOUND button to

set the start point (A) while playing

back.

“B” blinks.

:00A00B01

4 Press the REPEAT/SOUND button to

set the end point (B).

“A B” is displayed and the specified section

is played back repeatedly.

:00A55B01

Notes

• You cannot set A-B Repeat for a section that

overlaps two or more tracks.

• If you do not set the end point (B), the end point

is automatically set at the end of the track.

• You cannot use A-B Repeat in the Group mode

or when the current time is displayed.

G

r

o

u

p

M

o

d

e

o

d

e

continued

Shuttle switch

Press

(Confirm)

Nx button

REPEAT/SOUND button

to (+/>)

to (./–)

none (Normal play)

(All Repeat)

(Single Repeat)

(Group Repeat)

(Group Shuffle Repeat)

(All Groups Shuffle Repeat)

NW-E50/E70/E90 GB/CS 3-267-071-14(1)

16-GB

Repeat mode

(continued)

z Tips

• You can fast-forward or fast-rewind by rotating the

Shuttle switch, after the start point (A) is set. If the

track reaches the end while fast-forwarding, the end

point is set as point (B) and fast-forwarding continues.

A-B Repeat starts when you release the Shuttle switch.

If the track reaches the beginning while fast-rewinding,

it jumps to the end of the track, the end point is set as

point (B), and fast-rewinding continues.

• You can fast-forward or fast-rewind by rotating the

Shuttle switch, during A-B Repeat playback. If the

track reaches the track start/end while fast-forwarding

or fast-rewinding, playback is stopped (enters Standby).

A-B Repeat restarts when you release the Shuttle

switch.

To clear the start point (A) and end point

(B)

• Press the REPEAT/SOUND button during A-B

Repeat playback.

• Press the MENU button during A-B Repeat

playback.

• Select the Group mode by pressing the GROUP

button during A-B Repeat playback.

• Select the previous or next track by rotating the

Shuttle switch during A-B Repeat playback.

(The A-B Repeat mode is not canceled.)

To cancel the A-B Repeat mode

Change the Repeat mode in the menu screen (page

14).

Playing specified

sentences repeatedly

(Sentence Repeat)

This function automatically detects only voice

data from the setting point and repeats the voice

data for setting counts. It is useful for learning a

foreign language.

z Tip

The default repeat counts setting is 2 times for one

sentence. But you can change the repeat counts setting.

Refer to “Setting the repeat counts” on page 17.

1 Select the Sentence Repeat mode

(SENTENCE Rep) (page 14).

2 Press the Nx button to start playback.

3 Press the REPEAT/SOUND button to

place the setting point during playback.

The Network Walkman detects spoken

sections and non-spoken sections from the

set point, and Sentence Repeat starts. (The

spoken section is repeated once (during

detection), and the setting is counted.)

1:0201 0

Notes

• You cannot use Sentence Repeat in the Group

mode, or when the current time is displayed.

•A spoken or non-spoken section of less than 1

second will not be detected.

• If a non-spoken section is not detected until the

track end, the track end point is recognized as a

non-spoken section and Sentence Repeat begins

from the previous spoken section.

To clear the setting point

• Press the REPEAT/SOUND button during

Sentence Repeat playback.

• Press the MENU button during Sentence Repeat

playback.

• Select the Group mode by pressing the GROUP

button during Sentence Repeat playback.

• Select the previous or next track by rotating the

Shuttle switch during Sentence Repeat playback.

(The Sentence Repeat mode is not canceled.)

To cancel the Sentence Repeat mode

Change the Repeat mode in the menu screen (page

14).

G

r

o

u

p

M

o

d

e

o

d

e

Shuttle switch

Press

(Confirm)

Nx button

REPEAT/SOUND button

to (+/>)

to (./–)

NW-E50/E70/E90 GB/CS 3-267-071-14(1)

17-GB

Advanced Operations

continued

Setting the repeat

counts

You can set the repeat counts (1-9) of one

sentence for the Sentence Repeat mode.

1 Press the MENU button.

The menu screen is displayed.

REPEAT MODE>

2 Rotate the Shuttle switch to select

“REPEAT MODE >” and press the

Nx button to confirm.

3 Rotate the Shuttle switch to select

“SENTENCE Rep” and press the Nx

button to confirm.

“COUNT:” is displayed on the screen.

COUNT:2

4 Rotate the Shuttle switch to select a

desired repeat counts and press the

Nx button to confirm.

5 Press the MENU button.

The display returns to the normal screen.

To cancel the Menu mode

Select [RETURN] in the menu screen or press the MENU

button.

Changing the

display mode

You can view information such as track numbers

or titles in the display while music is played or

stopped. Change the display mode by operating

the Shuttle switch in the Menu mode.

• Lap Time: Elapsed time display mode

The following will be displayed after a music title and

artist name are displayed.

* Play: Displays and alternately.

Stop: Displays .

Search track: Displays > or ..

Fast-forward/Fast-rewind: Displays M or m.

• Title: Title display mode

When the music title includes more than 12 characters,

the title will be automatically scrolled.

T itle/Artis

• Track info: Track information display mode

The track title, CODEC, and bit rate are displayed.

When the information includes more than 12

characters, the information will be automatically

scrolled.

T itle/Codec/

While searching, fast-forwarding, or fast-rewinding a

track, the current playing position is displayed.

009 01:36

Track number Elapsed time

Play status*

G

r

o

u

p

M

o

d

e

o

d

e

Shuttle switch

Press

(Confirm)

Nx button

MENU button

to (+/>)

to (./–)

NW-E50/E70/E90 GB/CS 3-267-071-14(1)

18-GB

Selecting the group

display mode

For any menu mode, you can select the group

display by pressing the GROUP button.

G

r

o

u

p

M

o

d

e

GROUP button

Changing the display mode

(continued)

1 Press the MENU button.

The menu screen is displayed.

REPEAT MODE>

2 Rotate the Shuttle switch to select

“DISPLAY >” and press the Nx

button to confirm.

The selected display mode blinks.

LapT ime

3 Rotate the Shuttle switch to select a

desired display mode and press the

Nx button to confirm.

The display switches to the selected display

mode.

DISPLAY>

4 Press the MENU button.

The display returns to the normal screen.

To cancel the menu mode

Select [RETURN] in the menu screen or press the MENU

button.

Note

The display automatically returns to the normal playback

screen if you do not press any buttons for 60 seconds.

G

r

o

u

p

M

o

d

e

o

d

e

Shuttle switch

Press

(Confirm)

Nx button

MENU button

to (+/>)

to (./–)

To cancel the group mode

Press the GROUP button in the group mode screen.

Note

The display automatically returns to the normal playback

screen if you do not operate any button for 30 seconds.

NW-E50/E70/E90 GB/CS 3-267-071-14(1)

19-GB

Advanced Operations

Adjusting treble

and bass (Digital

sound preset)

You can adjust the treble and bass. You can preset

two settings, which can be selected during

playback.

Selecting the Sound

quality

Default settings

Sound SOUND 1 SOUND 2 SOUND OFF

quality

(S1) (S2)

(NORMAL SOUND)

Bass +1 +3 ±0

Treble ±0 ±0 ±0

Press and hold the REPEAT/SOUND

button for half a second.

The Sound quality setting is changed as follows:

To return to the normal Sound quality

Select “SOUND OFF.”

G

r

o

u

p

M

o

d

e

REPEAT/

SOUND button

Adjusting the sound

quality

You can adjust the sound quality of bass and

treble parts.

Sound quality Emphasis level

Bass -4 to +3

Treble -4 to +3

You can preset desired sound quality settings as

“Sound 1” and “Sound 2.” While playing music,

you can assign a preset sound quality to music.

1 Press the MENU button.

The menu screen is displayed.

REPEAT MODE>

2 Rotate the Shuttle switch to select

“SOUND >” and press the Nx button

to confirm.

SOUND: 2 >

continued

G

r

o

u

p

M

o

d

e

o

d

e

Shuttle switch

Press

(Confirm)

Nx button

MENU button

to (+/>)

to (./–)

S1 S2 (none)

NW-E50/E70/E90 GB/CS 3-267-071-14(1)

20-GB

Locking the

controls (HOLD)

You can protect your Network Walkman against

accidental operation by using the HOLD function

when carrying it.

Slide the HOLD switch in the direction

of the arrow.

All operation buttons are disabled.

If you press buttons while the HOLD switch is on,

“HOLD” blinks in the display.

To release the HOLD function

Slide the HOLD switch in the opposite direction of the

arrow.

G

r

o

u

p

M

o

d

e

HOLD switch

3 Set the tone for “SOUND 1.”

1 Rotate the Shuttle switch to select

“SOUND 1 >” and press the Nx button

to confirm.

2 “BASS:+1” appears, rotate the Shuttle

switch to adjust the emphasis level of

bass sound and press the Nx button to

confirm.

3 “TREBLE: 0” appears, rotate the Shuttle

switch to adjust the emphasis level of

treble sound and press the Nx button to

confirm.

4 Press the MENU button

The display returns to the normal screen.

To adjust the “SOUND 2” setting

Select “SOUND 2” in step 3.

To cancel the menu mode

Select [RETURN] in the menu screen or press the MENU

button.

Adjusting treble and bass

(Digital sound preset)

(continued)

ページが読み込まれています...

Sony NW-E50 取扱説明書

このマニュアルも適しています

Sony NW-E50 取扱説明書

他の言語で

関連論文

その他のドキュメント